Search results: irri

Sort order

366 models

7-Inch Irrigation Ring With 0.375-Inch Tube Inlet

This is a 7-inch diameter irrigation ring designed to be used with 0.375-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…

Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
467
Likes
97
Rating
5
P
Printablesandrox

Wifi addon for Claber(R) irrigation control

The box fit with an existing claber irrigation control system (this is the 8425 aquauno pratico) that drives a solenoid 9v valve. The original one has a simple start/stop button. Here I used a ESP8266 with tasmota firmware, a DC-DC…

Print approx. €4.63–€5.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
10
Rating
0
P
PrintablesXYZ.Thought

Automatic PET bottle watering \ drip irrigation system ''sturdy and easy to print''

It is a system that helps to keep the soil moist wherever it is needed in a flower bed, garden or flower pot. Tested with a 1.5-liter bottle of mineral water, it lasts up to 4 days, but all standard bottles are suitable, I recommend…

Downloads
10,087
Likes
2,328
Rating
4.68
P

Garden Irrigation Spray System - Garten Bewässerung System

Hi here you will find a garden irrigation system like the manufacturer gardena has. Free under the motto "Why buy, when you can print it" ;-) I have designed it modularly and as GlueEdition so that you can connect different ground…

Downloads
2,752
Likes
674
Rating
4.88
P
PrintablesMicromet

Drip Irrigation Ring

Drip irrigation ring for containerized plants. Two sizes are provided - 100 mm and 120 mm. The Openscad file is also available for customization - you can vary the diameter of the ring, diameter of orifices, and the number of…

Downloads
2,447
Likes
507
Rating
4.71
P
PrintablesOshhe Yt

3D Root Watering Spike 15cm - 360° Irrigation System

Title: 3D Root Watering Spike 15cm - 360° Irrigation System Description: An innovative and effective solution for indoor and outdoor plant care! This 15cm watering spike is designed to deliver water directly to the root zone, preventing…

Downloads
2,153
Likes
856
Rating
3.33
P
PrintablesLupis1

PET bottle irrigation spike

The cap is designed to fit PET bottles (with thread PCO1881 which fit all bottles I could find in my household) and turn the bottle into a water irrigation system for e.g. flowers. The cap is printed without support, but a 0,2 mm surface…

Downloads
1,166
Likes
195
Rating
3.73
P
PrintablesZakoplex

Water change diffuser for refilling without stirring up the tank

Easy to print. Just turn on organic supports and it should be dandy. Diffuses the water being poured into the tank when topping it up. Hope you like it!

Downloads
1,055
Likes
314
Rating
4.75
P

Irrigation Fittings

You definitely need to print these in ABS or another plastic that holds up well outside. The valve needs 3 rings to function properly without it, and will leak.

Downloads
1,052
Likes
147
Rating
5

5.5-Inch Irrigation Ring With 0.25-Inch Tube Inlet

This is a 5.5-inch diameter irrigation ring designed to be used with 0.25-inch ID Tubing. Use a small ball valve to adjust the flow rate of the water through the ring. This works perfectly with my 2-Liter Soda Bottle To 0.25-Inch ID Tube…

Downloads
975
Likes
200
Rating
3
P
PrintablesMakerMeik

Drip head for garden irrigation system (like Gardena Micro-Drip)

This is a drip head for my garden irrigation system, based on the Gardena Micro-Drip hose. I use it to irrigate my tomatoes and chillies with the water from my rain barrel. I have put together a short video of my irrigation system:…

Downloads
888
Likes
129
Rating
4.67

2-Liter / Soda Bottle Cap to 1/4" Drip Irrigation Adapter

This cap is designed to allow you to fill a 2-liter bottle with water, and then attach a hose that will slowly drip the water into a plant container over a period of time. IMPORTANT: Cut a small washer out of craft foam to help seal the…

Downloads
881
Likes
73
Rating
5
P
PrintablesMeister Edel

Stirring rod/ mixer for paint & epoxy support free (fully printable & wood)

Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It…

Downloads
874
Likes
184
Rating
5
P
Printablesueda

Irrigation pipe to garden hose system adapter

16 mm irrigation pipe to gardena / garden hose adapter that screws onto ¾" threads. Needs a rubber seal and O-Ring that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation…

Downloads
823
Likes
191
Rating
5
P
PrintablesJoe's wood'n 3D

Spare peg for garden irrigation - e.g. Gardena pipe compatible

Do you know this problem? Seems like mother earth swallows the pipe pegs of your garden irrigation system? Or they simply break after some time? Here's the solution! These pegs fit standard micro drip irrigation systems such as Gardena or…

Downloads
710
Likes
159
Rating
5
P
PrintablesAinon3Dtisk

Claymore irrigation mine for gardeners

Hello, I have a claymore watering mine for gardeners. Fantastic model for watering plants. Just pour water inside and it will gradually hydrate your bouquet or plant! I used PLA/PETG Basic as the material yes need to use supports If you…

Downloads
626
Likes
365
Rating
5
P
PrintablesNelisW

Drip/micro-spray irrigation splitter with Gardena connector

Drip/micro-spray splitter connecting to Gardena hose pipe. The requirement was to water bonsai trees, using micro-spray heads on flexible pipes, from a ten-way splitter connected to a hosepipe with Gardena fittings. The final design does…

Downloads
580
Likes
107
Rating
5
P
PrintablesJack

PET-Bottle Irrigation Spike

Vase prints with 18.2mm bottom for thread. If collar lip of the bottle doesn't seal with rim (water running out the tip because air can enter the bottle at the thread) - use some PTFE seal tape, or Vaseline.

Downloads
565
Likes
63
Rating
5
P
Printablesueda

Irrigation pipe T connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Downloads
564
Likes
80
Rating
3.67
P
Printablesueda

Irrigation pipe to garden hose adapter screw

16 mm irrigation pipe to gardena / garden hose adapter that screws in ¾" threads. Needs a rubber seal that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation pipe end…

Downloads
551
Likes
95
Rating
5
P
PrintablesDusanJ

Adjustable dripping irrigation set

I designed components for my greenhouse irrigation system. It fits regular 1/2" (13 mm) hose and 4.6 mm hose (tested on Gardena irrigation 4.6 mm hose). Dripper endpoints are adjustable so them allow to set the desired amount of water for…

Downloads
531
Likes
121
Rating
5
P
PrintablesmuJoseph

Micro Drip Irrigation Kit Hose Clamp Stakes

Tips Use a zip tie through the hole to further secure the tubing within the clamp (optional). Print with PETG for best performance in outdoor applications.

Downloads
522
Likes
61
Rating
5
P
PrintablesBITaMinD R+D

RIEGGÅ - Parametric drip irrigation hose adapter

Parametrizable adapters for low pressure hoses for a hurry. The central part is to use one spanner, it rounds to millimeters. For other sizes, just change the values of the parameters hoseDiameter in the spreadsheet for your needs There…

Downloads
519
Likes
117
Rating
0
P
PrintablesBlutaxt Malta

Plant Pot Water Irrigator

A gravity irrigation system for your plant pots. Easy to use! After installing it into your plant pot and partially covering the ring with soil, just add water and let gravity do the rest as your plant will have water provided all around…

Downloads
491
Likes
225
Rating
4.5
P
PrintablesSkreelink

Resin Vat Stirring

I don't always empty my resin vats, nor do I use them within 48 or so hours so the resin separates in the tank. I noticed the gray I have is particularly bad, it can want to settle out by the end of a long print. It sat for about 3 days…

Downloads
472
Likes
69
Rating
5
P
Printablesfuchsr

Takenoko Tile Holders and Irrigation Channels

I saw geodesign's grid and canals for Takenoko and really liked the models (maybe because just the day before we'd managed to accidentally knock over our elaborate tile layout ☹). However, I really wanted single tile holders, not triples.…

Downloads
432
Likes
56
Rating
5
P
PrintablesDazza

King Theoden Helmet LOTR Rohan Rohirrim Lord of the Rings

A mock up of King Theoden's helmet from the Lord of the Rings. Now you too can defend Helm's Deep. (Not to be used in actual combat)

Downloads
421
Likes
103
Rating
0
P
Printablesmartyx

Watering (irrigation) system 20-way splitter

20-way splitter for DIY home automated irrigation system Designed for: 1x input hose 8mm (inner diameter) 20x output hoses 4mm (inner diameter)

Downloads
420
Likes
157
Rating
0
P
Printablesueda

Irrigation pipe connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Downloads
405
Likes
65
Rating
5
P
PrintablesAnivia

190mm drip irrigation ring / halo

Remix of https://www.printables.com/de/model/103003-drip-irrigation-ring/ for bigger pots. Added additional peg holes for increased stability and to make leveling easier

Downloads
387
Likes
46
Rating
0
P
Printablesjscott1701

Drip irrigation Cross Fitting

Barbed drip irrigation fitting. Fits 1/2" poly Category: Outdoor & Garden

Downloads
384
Likes
71
Rating
0
P
Printableschristofferrap

Adjustable irrigation sprinklers for 4.6mm irrigation hose

Adjustable sprinklers for 4.6mm (3/16") hose. The flow through the sprinkler may be adjusted by twisting the cap. Multiple sprinklers may be places in series using the provided tee. The sprinklers uses a 2.4 x 18 (OD) mm O-rings to reduce…

Downloads
364
Likes
72
Rating
5
P
PrintablesTincan

Irrigation Drip Stakes

UPDATE: 6/3/26 added STL of longer version at user request (+ 50 mm, about 210 mm total) This model is a printable version of the rainbird style drip irrigation stake. The center hole is sized for floraflex ¼ drip line. The orange stake…

Downloads
349
Likes
42
Rating
5
P
Printablesueda

Irrigation pipe L connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Downloads
346
Likes
44
Rating
5

Irrigraion halo dripper for plant wattering

This is dripper I designed for my hydroponics system. I use it with 10 cm (4 inch) rockwool cubes. External diameter is 7 cm. Printed in two parts: dripper and hose connector. Hose connector has to be glued to dripper. Holes has to be…

Downloads
324
Likes
61
Rating
5
P
Printableschris

Garden hose to 1/4" drip irrigation adapter

Garden hose to 1-4th drip irrigation adapter. adapter works but im having trouble getting it to seal Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Prusament PLA…

Downloads
322
Likes
62
Rating
5
P
PrintablesMace3D

Quirril: Hollow Knight Wall Art

I couldnt find any decent wall art of characters from the Hollow Knight game so I made some myself based on the game sprites.

Downloads
322
Likes
56
Rating
4
P
PrintablesMRLeach85

Garden Irrigation Watering Rings

*** Update *** I added internal baffling to the manifold to even out the distribution to the 10 outlets. I was using a soaker hose to water my garden, but I found it had a few shortcomings. I was watering areas between my plants that did…

Downloads
316
Likes
123
Rating
0
P
PrintablesKarel Schwarz

Irrigation peg / ground stake / hose tube holder 16mm

Another irrigation peg / ground stake / hose tube holder for 16mm diameter

Downloads
309
Likes
30
Rating
5
P
PrintablesTim

1/2"NPT x 3/16" Barb Fitting for Drip Irrigation

Made this to thread into 1/2" NPT fittings for drip irrigation.

Downloads
289
Likes
41
Rating
5
P
PrintablesUsman Suriono

Neti Pot , Nasal Irrigation with optimized tilt

The neti pot is tilted intentionally, that way the saline/water does not overflow out of the trunk (when you fill it) and allow lower trunk for optimal design. Designing neti pot involves the optimal way of less pot tilting and how much…

Downloads
283
Likes
20
Rating
5
P
Printablesemmgr23

Anti-Wear & Anti-Irritation Shoe Heel Guard

TPU Heel Protector I made this because the inside heel area of my sneakers always wore out too quickly. Once the fabric starts tearing, the harder material underneath starts rubbing against the back of the heel and becomes uncomfortable…

Downloads
279
Likes
197
Rating
5
P
PrintablesAlireza Ahmadi

Drip Irrigation Ring

The 3D model of the Drip Irrigation Ring is an advanced solution designed to improve water efficiency in gardening and farming. The ring measures 130mm by 115mm in diameter, ensuring it fits seamlessly around a variety of plant bases for…

Downloads
273
Likes
31
Rating
0
P
PrintablesIK3D

IRRIGATION PEGS / GROUND STAKES / HOSE TUBE HOLDER

Here a super easy, simple and fast printing peg for irrigation pipes. They print in about 15-20min each and work great, it has been designed to use with 13mm/0,51inch irrigation pipe, if you need different sizes just resize it to suit.

Downloads
270
Likes
28
Rating
0
P
Printableshmil

Micro irrigation end cap 4.6mm

End cap for 4.6mm drip irrigation line. Print instructions Works well in 0.2mm layer height. Doesn't need a brim. Use PETG if possible.

Downloads
265
Likes
36
Rating
5
P
PrintablesJamie B.

Irrigation Rotor Retainer Clip

A retainer clip used to temporary keep a sprinkler rotor in the "up" position, allowing the nozzle to be changed. Should work with all Hunter brand residential (¾" inlet) pop-up rotors (PGP, PGP Ultra, I-20 series). Might work with other…

Downloads
260
Likes
13
Rating
5
P
PrintablesBITaMinD R+D

TÅPPA - Parametric drip irrigation hose plug

Parametrizable Plug for low pressure hoses for a hurry. The rear part is to use one spanner, it rounds to millimeters, To print place it on top. For other sizes, just change the value of the parameter hoseDiameter in the spreadsheet for…

Downloads
257
Likes
38
Rating
5

Drip Irrigation Watering System

Drip irrigation is one of the most efficient water and nutrient delivery systems available. It delivers water and nutrients directly to the plant's root zone, in the right amounts and at the right time, so each plant gets exactly what it…

Downloads
254
Likes
63
Rating
5
P
PrintablesLuckyMenace

1/2 inch / 13mm Irrigation Tube End Plug

Barbed end plug for run of 13mm irrigation tube / pipe - insert past the barb to stop water flow. Ensure you flip the STL file if using this - otherwise import the 3MF as this is the correct way around.

Downloads
253
Likes
34
Rating
5
P
PrintablesPrintical

Geometric Cocktail Stirring Sticks

Print in different colors to use them as drink identification at parties! Use 0.3mm layer height

Downloads
251
Likes
71
Rating
5
P

Lord of the Rings Rohirrim Wall Sconce Light LED

This is a Lord of the Rings Rohirrim themed sconce light I designed to go below my United Cutlery LOTR swords. The lights are just LEDS and is designed to shine light upward at the swords. My youtube video shows the process of making it.

Downloads
243
Likes
136
Rating
0
P
Printablesid2Pat

Chainable drip irrigation system for water bottle

Device for supplying drip irrigation allowing to fill a set of bottles from any bottle of a circuit. Allows implantation away from the root system of plants and offers watering without going through the middle of the plantations…

Downloads
240
Likes
90
Rating
4.5
P
PrintablesBuggi

Parts for Greenhouse / Garden irrigation

I made some Parts like hose holders and T-Fittings / T-Reductions for 16mm (1/2'') to 4-5mm hose. Was fun to construct in Freecad and helps me a lot with my greenthumb hobby. Print instructions no supports needed If it does not get…

Downloads
232
Likes
54
Rating
5
P
PrintablesCropse

Drip Irrigation Ring smaller

Smaller ring for smaller pot

Downloads
230
Likes
23
Rating
5
P
PrintablesJDePriest89

Irrigation Drip Line End Plug

This 1/4" irrigation drip dummy plug STL file allows you to 3D print a durable plug for your drip irrigation system. Designed to seal 1/4" tubing ends, it prevents water leakage and improves system efficiency. Easy to install after…

Downloads
228
Likes
18
Rating
0
P
PrintablesMeady

Micro Irrigation Manifold

Multi port manifold for Micro plant irrigation system. It uses a standard Gardena/hozelock adapter on the garden hose. I have included a 4 port fused manifold. All port are active all the time the water is turned on. This model requires a…

Downloads
227
Likes
56
Rating
5
P
PrintablesTmpx64

Easy to print Plant watering globe / Water dripper / self-watering insert / irrigator

Keep your houseplants irrigated while you are away. Designed for simplicity and reliability, this model provides a steady water supply to your plants without complicated systems or expensive equipment. Simply fill it with water, insert it…

Downloads
226
Likes
32
Rating
5
P
PrintablesJLS

Just another drip irrigation tube stake

I print them in PETG, for a better resistance. If you use it in a dry/hard soil it might brake.

Downloads
222
Likes
30
Rating
5
P
PrintablesDebolestis

1/2 and 3/16 drip irrigation holders for drip hoses

These are the holders for ½" (13mm) and 3/16" (4,6 mm) Gardena and similar drip hoses. Soaker hoses fit as well. 5th Sep. 2023. Added a hook for 3/16 (4,6 mm) drip hoses, short and long variant. Long variant is as long as ½ version. Added…

Downloads
218
Likes
34
Rating
5
P
PrintablesNicerSlicer

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Gardena Micro-Drip Irrigation 0.5 inch (15mm) clamp stake

Downloads
205
Likes
25
Rating
5
P
Printablesreallifeonhold

Irrigation Hose and Drip Line Clips

Easy-to-use irrigation clips for securing .700" (OD) and .250" (OD) drip irrigation lines. Simply attach the clip to the line and press into soil to secure. Note: clips are sized to nominal dimensions, you may need to scale up or down…

Downloads
205
Likes
59
Rating
4
P
PrintablesA2S_dESIGN

16 mm IRRIGATION PIPE CLAMP

We present an ingenious and practical solution for irrigation systems: a 16 mm pipe clamp specifically designed to be manufactured in a single piece using 3D printing. It incorporates an efficient toothed locking system. This allows the…

Downloads
204
Likes
37
Rating
5
P

Drip irrigation connectors. Strong and functional

Helping to my friend with dripping system, deside how to fix pipes in the place, just in case more water preasure. Connectors for drip irrigation system/pypes. For sure you can scale as needed. Like my work? 🔔 Follow my profile to get…

Downloads
204
Likes
60
Rating
5
P
Printablesoriddlero

Popsicle Stick to Drill Mixing Adapter for Epoxy & Resin - Cheap & Disposable Automatic Stirring!

Last night I was stirring ~500ML of epoxy with a popsicle stick… Suffice to say it was not fun at all… 20 minutes later this adapter was born. This simple adapter allows you to use popsicle sticks with your drill. Sure, there are lots of…

Downloads
204
Likes
79
Rating
4.5
P
Printablesfirstgizmo

Plant watering irrigation stick

Just choose a type and print it as you desire. The hose is hold down by simply routing it through the holder The _Long version is intended to be used in gardens. The shorter version however is great for plants in pots and planters

Downloads
201
Likes
58
Rating
5
P
PrintablesErudo

Mixing / Stirring propeller - Míchací vrtule

Míchací vrtule k uchycení na závítovou tyč s lůžkem pro matici M6. Stirring propeller to be attached to a threaded rod with a seat for an M6 nut.

Downloads
198
Likes
23
Rating
5
P
PrintablesRaQic

Hook - Gardena watering/irrigation system

Hook for automatic Gardena watering/irrigation system.

Downloads
198
Likes
59
Rating
4.67
P
Printablesschlick7

Irrigation Emitter Cap

I wanted to reduce the flow that my cheap 8way emitters were putting out. I bought a cheap 50pack knock off version of rain bird emitters (example in pictures). I have too many in the garden now though and can't get enough pressure so I…

Downloads
187
Likes
40
Rating
5
P
Printablescfeldhaus

6mm / 0.25inch Garden Irrigation Pipe Kink End Cap

If used outdoors print with UV resistant filament, such as Prusament ASA.

Downloads
181
Likes
44
Rating
5
P
Printablesmuddymaker

Coke Bottle Plant Irrigation Cap

If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Recycle and reuse those pesky plastic coke bottles for…

Downloads
180
Likes
24
Rating
5
P
Printablesppaukstelis

Adjustable sprinkler nozzle for drip irrigation tubing

This is a simple sprinkler head that fits into 1/4" drip irrigation tubing. It is distance adjustable using a 4-40 (or similar size) screw threaded through one of the holes in the top of the deflector piece. Printed in ABS, as this will…

Downloads
171
Likes
26
Rating
0
P
Printablesfns720

Irrigation connector

This is a simple connector designed to a friend of mine to connect a 1/2" BSP thread on a magnetic valve with 1/2" plastic dripping tubes.

Downloads
169
Likes
29
Rating
0
P
PrintablesMy 3D Prints

3.8" to 4mm adapter for Micro Irrigation Water Pipe Tube

Converts 3.8" to 4mm measures for using Micro Irrigation Water Pipe Tube

Downloads
168
Likes
24
Rating
0
P
PrintablesShakataGaNai

Drip Irrigation clip for GreenStalk Vertical Planter adapter

This is designed for use with the GreenStalk Original Vertical Planter . It slips over the rim of the top water reservoir tier, fairly snug if printed in PLA. The ¼ inch drip irrigation tubing then slots into the top, with a little bit of…

Downloads
166
Likes
33
Rating
0
P
Printablesueda

Irrigation Pegs 16mm

Adaption of the original 13mm irrigation pegs from IK3Digital to 16mm pipes. I essentially redrew the shape and remodeled the curve at the top to be the same, just for 16mm as I did not want to just scale the whole thing up and waste…

Downloads
166
Likes
20
Rating
5
P
Printablesgskollnau

Propeller with stick for stirring paints such as acrylic paint

2 different propellers, clockwise and counterclockwise. First glue the propeller to the stick. Stick is made for cordless screwdrivers with 7 mm drill chuck. Rotation propeller has a diameter of 50 mm, so the edge and the inside of the…

Downloads
165
Likes
14
Rating
0
P
PrintablesJay

Garden Irrigation Spray System / Garten Bewässerung System (remix)

This is a remix of the great Spray System by schiffer-soft. I have change the output-nozzle and delete some parts to print it easier. 90, 180, 360 degrees are available. The other parts like midsection and groundholder you can find in the…

Downloads
165
Likes
34
Rating
0
P
Printablesyancha

Milk bottle plant irrigation adapter

This is a screw cap I designed to convert old milk bottles into self-watering bottles for plants. Just screw it onto a milk bottle, fill it with water, and stick it into the soil — it releases water gradually, so you can go on vacation or…

Downloads
164
Likes
55
Rating
5
P
PrintablesDBert

Growbox Irrigation Funnel

Hello, I have created this funnel to water the plants inside my grow tent. Often, I don't have direct access to the plant pots, and watering them is challenging even with the help of a watering can. So, I use a simple funnel and a rubber…

Downloads
163
Likes
64
Rating
0
P
Printableslayer.works

Paint/Fluid Stirring Stick

Needed a stick to stir some spar varnish with, but didn't have anything handy: made one. For use with a quart sized container (approx 1L). Scale as you please… Print instructions Download. Slice. Print. Summary Print. Stir. How I Designed…

Downloads
162
Likes
31
Rating
5
P
Printablesmarek

reduction 1/2 to 1/4 -drip irrigation

reduction 1/2 to 1/4 -drip irrigation

Downloads
162
Likes
31
Rating
0
P
PrintablesIsomorf 3d

3/4 inch PVC coupler with 2 liter soda fitting for irrigation

Uploaded V2 - better tolerances all around, and significantly shortened the overall length to cut down on plastic A ¾" schedule 40 PVC pipe-coupling that adds a 2 liter soda-bottle (standard US-threads). I created this as a cheap way to…

Downloads
155
Likes
36
Rating
0
P
PrintablesFerment3d

1/2" Drip Irrigation Tube Anchor Screw Mount

Mount your 1/2 irrigation tubing to wood. Originally made for Rain Bird T63-100 1/2" Drip Irrigation Tubing. Mounts with 1 screw. Original tubing this was designed for has a 0.634" OD, hole for screw is 4.75mm (I know, mixing units)

Downloads
153
Likes
20
Rating
5
P
Printablesmethylene67

Micro drip irrigation support for ø4 mm irrigation hose

No supports, use ASA or PETG material.

Downloads
150
Likes
31
Rating
5
P
PrintablesNikoFly

Plants perfusion - perfusion à végétaux - irrigation sprinkler

Friends gardeners, farmers and makers, I am happy to share with you my concept of plant perfusion !! You can now go on weekends or holidays with peace of mind, your harvest is protected. I designed this adjustable gravity drip sprinkler…

Downloads
147
Likes
39
Rating
0
P
PrintablesUglylittlebush

Simple Reliable Garden Sprayer | 1/4" Irrigation Stake Design

Howdy guys and gals! I wasn’t quite satisfied with the garden sprayers I could find in the store, so I made my own! It has an integrated stake and features 8 small streams that spread to a little more than a 12" diameter. It puts out a…

Downloads
145
Likes
41
Rating
4
P
PrintablesFergy7

"C" shape Irrigation Ring

Best printed at higher resolution - say .16 or even .10. Use PLA is application is indoors.

Downloads
142
Likes
17
Rating
0
P
Printableshakmo

Vego Garden Drip Irrigation Mounts

A set of models to make attaching drip irrigation to your Vego Garden raised beds easier. Currently just a clamp to allow mounting of ½" tubing in a horizontal orientation, but I will be adding more as I build out our irrigation system.…

Downloads
141
Likes
37
Rating
5
P
Printablesltlowe

Orbit Irrigation Sprinkler Protectors

Irrigation Sprinkler Protectors for Orbit Saturn-III and Voyager-II gear drive sprinkler heads. My models are inspired by @jimerb_132206 Grass Protection Ring but designed from scratch to completely cover the head except for the riser.…

Downloads
140
Likes
29
Rating
0
P
PrintablesFergy7

C-irrigation ring - larger version

My earlier 96mm version was designed for 4mm ID tubing. Whereas this one requires 5mm ID tubing the nipple/ring joint can see more stress in handling and in final placement. Therefore more care/means might be required to stress relieve…

Downloads
139
Likes
29
Rating
0
P
PrintablesDazza

Warrior of Rohan Rohirrim Palace Guard LOTR

To protect the Golden Hall of Meduseld

Downloads
138
Likes
17
Rating
0
P
PrintablesOlivier-Saraja

Piquet de maintien tuyau 6 mm goutte à goutte - Drip irrigation stake for 6 mm drip hoses

[FR] Piquet de maintien à imprimer à plat. Supports avec le plateau nécessaires. Pour tuyaux arrosage goutte à goutte de diamètre. 6 mm. [EN] Holding stake to be printed flat. Supports with heating bed required. For 6 mm diameter drip…

Downloads
138
Likes
7
Rating
0
P
PrintablesMino

Sprinkler irrigation system Nozzle variable spray sizes for 4mm ID Tube 1/4inch

I did not find any cool and working designs so i made my own. The Model is designed for 1/4 inch or 4mm inner diameter Tube. I uploaded some spayer sizes but the Fusion file is attached. Printed in ABS+ but any other Material should work…

Downloads
138
Likes
15
Rating
0
P
Printablesmethylene67

Distribution tubing holder for micro drip irrigation

Will have to use supports, use ASA or PETG material.

Downloads
136
Likes
18
Rating
5
P
PrintablesChris

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs

1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs prints best with barbs facing toward the build plate (& can likely print without supports)

Downloads
133
Likes
18
Rating
0
P
Printablesmikeeg

Irrigation tube crimper

"Crimper" to fold 1/2" poly irrigation tubing to seal the end. Prints in 22 minutes! 3 g of filament at 30% infill, 4walls. Print with PETG for good outdoor quality.

Downloads
130
Likes
28
Rating
4.5
P
PrintablesMicromet

Servo Water Valve For Irrigation and Flow Control

This 3D-printed mount system allows you to automate an Antelco manual irrigation valve using a standard MG995 or MG996 servo . It’s an ideal low-cost solution for DIY and smart IoT irrigation projects. Great for a rain-barrel garden…

Downloads
129
Likes
71
Rating
0
P
Printableslamarqueza

Quick garden irrigation hose stake

This is a fast print irrigation hose stake , it is 10 cms tall and it is made for 16mm irrigation hose. It took me 13 minutes to print and 2 g of filament. To be printed in PETG due it is going to be outdoors and need to be strong enough.…

Downloads
120
Likes
11
Rating
5
P
PrintablesMini Tokio

Irrigation hose stake

Ground stakes for a 15mm irrigation hose.

Downloads
120
Likes
17
Rating
5