Counting matching models…
This model holds the basic isopropyl alcohol bottle you get from stores like Walmart and attaches to the Honeycomb Storage Wall. I printed it with the Ender 3 v2 and used Cura as the slicer. With the honeycomb/hex container, it printed…
I wanted a shelf built specifically to fit my bottle of isopropyl alcohol for the Honeycomb Storage Wall. Both of the bottles I had in my house were ~ 80mm square, so I made this as a 84mm square to give an “easy fit” (with some sexy…
Add convince store alcohol bottles to gridfinity. It fits standard sized 65x65 mm square bottles. This has a gridfinity footprint of 2x2 units. The example was printed in 3DXTech orange PLA at 0.20 mm.
Holder primary designed for 1L of Isopropylalcohol bottle, but in general for any bottle. For taller bottles there is additional ‘fencing’.
Hallo ich habe hier einen Trichter im Trichter quasi so das wenn man nen Kaffeefilter rein macht das ISO z.B. dann nicht nur unten sondern auch seitlich gefiltert werden kann. gedruckt habe ich diesen mit PLA, wie PLA auf dauer auf…
I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…
This remixes a 32oz 80x80mm IPA holder for a pegboard (which is a remix of a smaller holder) and adds IKEA Skadis mounting pegs from the Fluke 87 V multi-meter holder. The mounting pegs are a bit tight. I clipped the corners to help them…
Wanted to hang my isopropyl alcohol on my WallControl Peg/Slot board. Made this remix to do that. Note: the part named “2x3 Spacer blank flush” is optional. I thought I would need it but it's not really necessary. You can still put it all…
Easy to print Isopropyl Alcohol Bottle holder for the Multiboard system. Holds a 32 FL OZ Bottle using Multiconnect system by @DavidD
A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.
Fits the 32oz bottle (78mm x78mm base) plus a little tray / shelf for the swabs I use. Printed with no flaws - about 7hrs print time with the settings I used. Hope you Enjoy! 0.20mm from a 0.4 nozzle 15% gyroid infill Supports on the back…
Inner dimensions are 81x81mm to account for some bulge, holds any bottle that is 80mm square and has chamfered edges.
Bottle holder for Isopropanol two drill holes for wall mounting suitable for 1 litre bottles
🧴 Support-free Wall Holder for 750 ml Isopropanol Bottles This 3D-printed wall holder is designed to securely hold a 750 ml isopropanol spray bottle , keeping your workspace tidy and your cleaning supplies within easy reach. The design is…
simply print the bot mounts to secure the part
Holds a quart Isopropyl Alcohol container, 82mm x 82mm, to a 1" spaced ¼" pegboard. Remix of @MakeAnything Devin Montes's Isopropyl Alcohol Pegboard Mount (found on MyMiniFactory and modified 12/17/22) to save 5g of filament and look…
This dispenser fits the Halsted Health 99.9% isopropyl alcohol wipes that are used to clean the 3D print bed print surface. Here is a link to the exact wipes that fit perfectly. https://amzn.to/3AiEgaW In the model file, I have removed…
I use the Solimo/AmazonBasics Isopropyl Alcohol Spray ( 1 bottle , multipack ) and wanted a clean way of storing the spray bottle and the cloths I use to clean the bed. I clean the bed before every print, quick spray and wipe down while…
Halter für 1L Flaschen Isopropanol für das IKEA Skadis System. Gedruckt mit Sovol SV06 (Düse: 0,4mm / Schichtdicke: 0,2 mm) ##################################################### Holder for 1L bottles of isopropanol for the IKEA Skadis…
I use the Solimo Isopropyl Alcohol from Amazon Basics . I usually put a tiny hole in the foil seal to allow the alcohol to drip out. Sometimes the foil tears, leaving a hole that lets too much alcohol out with each use. Rather than…
This dispenser is watertight. However, it's not that easy to get it watertight. Apart from proper print settings some parts have to be sealed with silicone. The design evolves around the physics effect of keeping water inside an upside…
A holder for big bottles up to 90 mm diameter, mountable with screwing to a wall or wood. Remixed the design from https://www.printables.com/de/social/157513-hammerschmit/about I printed it with paint on supports for the upper arch, in…
Simple and quick to print ISO bottle holder. Works great with 4 perimeters. I have printed it in PLA. It looks best when you draw the z-seam at the back of the mount. Have fun printing!
Was tired of misplacing my bottle of Isopropyl Alcohol near the printing area resulting in always needing to look for it! So here is a holder that I made for the 99% Isopropyl Alcohol bottle that you can get from Superstore (Loblaws).…
for the equate brand or i think the standard US iso alc bottle
A clean build plate is a happy build plate and my favorite way to clean my PEO/PEI, etc. build plates is lint free cotton rounds (found in the makeup section of any mega/drug store, don't cheap out - get the “lint free” ones, they are…
This is a tower to hold a pump bottle for IPA and cotton rounds. It can hold a bottle roughly 60mm round and 120mm tall. I use them to clean my build plate. Print instructions There is a separate top and bottom to print then super glue…
My 1L Isopropanol bottle shipped without spout, hence I designed one myself. You do not need to remove the spout when closing the bottle. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution:…
This just mounts my build plate cleaning materials on the wall right next to my 3d printer. Hope you enjoy it! If I remember correctly this should use m3 screws. Get back with me in the comments if you find otherwise. Category: Organization
I use the larger bottles of isopropyl to clean my build sheet. Seems fine printed in PLA, 20% infill. I've included two presliced profiles, one for Prusament PETG, and the other for generic PLA. These use 2.6 Alpha 3 Organic supports…
I use a MG Chemicals Isopropyl Alcohol Spray Bottle to clean my build plate between builds. It was just sitting on top of my enclosure so I made a mountable bottle holder for it. In case it helps others, the diameter of the bottle is 63.1…
Came out nicely for me when printed with a 0.8mm nozzle w/ 0.4mm layer height.
Simple remix for holding a 10oz spray bottle of isopropyl on the Ikea Skadis. I based this from a hook template found here and the Chep spray bottle holder ( 10oz IPA Spray Holder for Ender 3 V2 Styl | 3D model | Thangs ) over on Thangs.
A Skadis mount to hold CA Glue/Gluestick/Isopropyl and some extras. Uses t-nut mod from 6d6178 (https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards).
4x4 Gridfinity bin that holds a <67mm square bottle of isopropyl and a hex scraper with nice stepped holes.
Gridfinity mount for Menda Isoprophol Alcohol pump bottle
Das ist ein Isopropanol Flaschenhalter für 100ml Flaschen von Amazon. Damit die Flasche schick befestigt werden kann. Es gibt zwei verschiedene Versionen einmal mit Schraublöchern (4mm) zum anschrauben oder halt eine Version zum ankleben…
Isopropanol Bottle Nozzle for KS28 bottle thread with cap Print it with tree-organic supports, 100% infill and brim Outer bottle thread diameter 28mm, pitch 3mm. Used the original cap sealing and cut it a little
A pegboard holder for a 16oz (473ml) rectangular bottle of isopropyl alcohol and some q-tips.
I liked the design of the original, so I modified it to fit my specific use-case. Who knows, maybe it'll be useful to someone? There's extra space for a wire snipper, and a bottle of isopropyl alcohol. This is a bottle bought in Denmark,…
A threaded screw-on cap for the 5-gallon isopropanol drum from McMaster-Carr. A rough FreeCAD model of the neck in available as well.
Uchwyt na butelkę IPA z logo Anycubic
A 2x2 Gridfinity storage bin for a 16 oz. bottle of Isopropyl Alcohol. Inside dimensions for the bottle are 65x65mm.
Just a basic bottle holder that fits in the SKÅDIS peg board. Can be used for anything, but was designed to hold the 32oz bottle of iso alcohol from Equate. Supports on everything are required for the top hooks to properly print.…
Modification of my previous version. There was a request ( @SaintsReturn_5049 ) for a smaller one that fit a 66mm X 66mm bottle. Have not printed this one yet, but I think it should work? Hope you Enjoy! 0.20mm from a 0.4 nozzle 15%…
This is a Ikea Skadis tray remixed for an isopropanol bottle from Maxxis. The dimensions are 120x50mm.
Fits for LGM9H and LGM12H Different lenghts available. Integrated holder keeps the linear rails in position while cleaning. The funnel-shaped end helps with emptying. 250, 300, 350, 400mm. Can be printed in 2 pieces and then glued together
This is a simple Bottle Holder for the popular Ikea Lack Enclosure. The idea was to have easy access to my isopropanol Bottle on the side of the enclosure. I printed it with my Prusa MK3S with MMU2S ;) Print Instructions: Nozzle: 0.4mm…
32 ox Isopropyl Alcohol Holder for Honeycomb Wall (HSW)
IKEA Skadis Halter für Isopropanol
This remix of the isopropyl alcohol holder 16oz is made for the Multiboard system. It is attached to the wall using whichever flush snap you would like using two Mid Thread - Lite Fix Point ( https://than.gs/m/1322926 ) screws or the…
Wall bracket to hold a spray bottle of isopropyl alcohol next to 3D Printer. Can be printed without supports. Sized for “MG Chemicals 99.9% Isopropyl Alcohol Electronics Cleaner, 475 mL Liquid Spray Bottle” from Amazon.com.
I use IPA as a coolant/lubricant for my CNC machine when working with aluminium. I drew up this IPA bottle holder to attach a 1 liter IPA bottle to my gantry, but it really could be used anywhere you want to "hang" an IPA bottle. They…
A 2x2 gridfinity storage bin to hold a standard IPA safety wash bottle (75mm diameter). Features magnet holes for standard 6x2mm magnets. Printed on QIDI X-Plus3 from ELEGOO PETG. 0.24 layer height, 15% infill, no supports.
This is an extended version of a cotton pad dispenser, which also contains compartments for thermal paste, cotton sticks, a small bottle of isopropanol alcohol, and thermal paste tubes. These compartments can be used for anything.
Skadis mount I made for a 16 ounce bottle of IPA. Uses the M3 skadis t-nut mounting system found here: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb Happy printing!
Versions: V1: See Photo V2: Rounder Corners less Filament needed :-) DE: Dieses Modell kann am Prusa Enclosure vorne rechts angebracht werden. Ich nutze es um ein Isopropanolfläschchen griffbereit aufzubewahren. ENG: This model can be…
Designed in Tinkercad for a Bottle of Isopropyl Alcohol Spray with a Diameter of 65mm. Holds perfectly on Ikea Skadis.
62mm Bottle holder for HSW Bambu Lab PETG-HF Orange 0.2mm Layer Height Infill 15% Gyroid Arachne Tree Support Adapter to HSW: https://makerworld.com/en/models/174221#profileId-191522
This remix of the isopropyl alcohol holder 16oz is made for the Multiboard system. It is attached to the wall using whichever flush snap you would like using two Mid Thread - Lite Fix Point ( https://than.gs/m/1322926 ) screws or the…
Extended to have a place to put the isopropyl alcohol. Made for 86mm diameter bottle. Step file attached to adjust to your liking. (picture shown was printed in 2 hours using 5.0.0-RC input shaper on MK4)
Ce cône vous permettra d'y placer un filtre à café classique sans devoir le découper. Muni d'un couvercle pour limiter les dégagements gazeux. Muni d'une pièce avec filet pour bouteille standard. Conseils d'impression : - impression FDM…
Stand for build plate cleaner, isopropanol bottle, deburring tool and white marker. Can be print with or without mount plate to the printer. Plate cleaner - 65mm Bottle - 40mm Marker - 12mm Deburring tool (hexagon) - 12mm Very tight fit.
Small little cap to prevent dirt and damage to your IsoPro canisters. Best made from TPU.
Just another place to hold a Walgreens Isopropyl-Alcohol bottle with a few other slots for the basic tools and a sharpie marker. It can be attached to the IKEA Lack enclosure for fast access to your tools.
Jednoduchý držák hadičky na spreji.
wonder where to put your Isopropyl bottle ? here is my magnetic holder , for the CORE One. You will need one 25x5mm Magnet and some bottles if you don't already use these…
ich habe ein isopropanol holder entwickelt mit inne Durchmesser 46
A simple bottle holder for ISO. I used double sided tape to stick it to my printer. Printed on its back with tree supports.
Holder for Equate Alcohol 91 %
Printed in PLA, 0.25mm layer, 20% infil
Somewhere to put your spray bottle for cleaning the build plate
Customizable by openscad-parameters. Support mostly not needed, but you might define a minimal support at the end of the rails or a brim (like 5mm). See pictures and 3mf-file. If you got problems with the bridges, try to cut model into…
A two-piece holder for my bottle of IPA. Cup dimensions: 65mm diameter, 90mm tall 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
Simple sign ISOPROPYLALKOHOL/ISOPROPYLALCOHOL.
Isopropyl spray holder with hook to insert under AMS
Isopropyl Alcohol Spritzer Refill Funnel This is a small, loose-fitting funnel I created specifically for Meijer store-brand isopropyl alcohol spray bottles, but the dimensions may work well for other brands. The funnel is designed to…
A simple container for storing about 15 IPA swabs (50mm x 50mm) that doesn't take long to print. It took around 45 minutes on my MK3.5S using PETG and 0.25mm layer height.
Stand for Isopropylu by Nanobala inner dimensions 86 x 48 mm , inner height 32 mm -> so you can resize at slicer for your needs use PETG layer 0.2 - 0.3 mm no supports needed
Simple cap to protect your stove.
Holder / dispenser for individual isopropanol wipe sachets measuring up to 100mm x 60mm. Holds about 10 sachets.
Isopropanol 1l bottle wall mounted holder, screw in, sturdy more than enough for the 1l bottle of isopropanol even in PLA on draft settings
Stampato in PETG , ci sono 2 modelli uno con etichetta e l'altro senza etichetta
update 06.03.25 V2 added Cap with catcher suitable for the model "Standard PET bottle nozzle, 3DJake IPA Isopropanol", which is currently no longer available on Printables and only had a cap without a catcher strap. printed in TPU A95 -…
This tube holder is an accessory for Peristaltic Pump Housing . It holds the tube so it doesn't go in to the dirty stuff of decanted iso.
A simple box/shelf to hold a box of isopropyl wipers ( 103 x 55 x 50mm) on a honeycomb storage wall. Can also be used to hold other light stuff.
Skadis remix for a 10oz spray bottle of isopropyl
Easy to print Isopropyl Alcohol Bottle holder for Muscle Rack. Holds a 32 FL OZ Bottle
Transform your standard Isopropyl Alcohol bottle into a convenient spray bottle for quick and effective print surface maintenance. I designed this adapter to bridge the gap between common household spray heads and the standard threads…
2-teilige Schale für Pumpspray mit Isoprop, wird mit Nutenstein auf dem Drucker befestigt, beweglich, Durchmesser 40,5mm Nutenstein und Schale sind 2 Teile, einfach zu drucken 2-part bowl for pump spray with Isoprop, is attached to the…
Habe hier einen Isopropanol Halter für den Core One gemacht. Da ich keine Spule rechts verbaut habe und eine MMU3 nutze brauche ich den Original Halter nicht. Hier eine alternative ;) Einfach 4x Ruthex M3 Einschmelzhülsen rein machen und…
Can hold Bottles up to 82mm in diameter. Print best with PETG
A simple gridfinity bin for large bottles of IPA. Highly suggest you print with high infil or glue the bin, as otherwise you could remove the bin alongside the bottle. If only I made a magnet baseplate and used magnets xD
This is a simple side mount that sits on the floor next to your Anycubic Kobra S1 Combo and tucks right against the printer’s frame. It keeps three workshop essentials within arm’s reach: a jet blower lighter, a 3DLAC adhesion spray…
This is a simple siphon method to clean resin from IPA using a sintered bronze filter. I have been able to filter and reuse IPA 3 - 4 times before it becomes too contaminated to be useful. I used 24" of 3/8 copper tube and a sintered…
N-isopropyl-N'-phenyl-p-phenylenediamine (C15H18N2, CAS 101-72-4) — a free educational 3D molecular model for teachers and students, by MolGod.org. Symbols are engraved into every atom, so students read atoms by symbol, not by colour.…
Stampato in PETG , ci sono 2 modelli uno con etichetta e l'altro senza etichetta
Holder / dispenser for individual isopropanol wipe sachets measuring up to 100mm x 60mm. Holds about 10 sachets.
