10,844 models
A cute sitting low poly dog. Or maybe a fox. I don't know. Easy print that does not need supports. Members of the “Low Poly Comercial License” level on patreon (https://www.patreon.com/c/matthiasl/membership) can use this model…
This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…
Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…
Very simple design that should print without supports https://sketchfab.com/3d-models/hello-kitty-ebaf7a375aa94d53952fa9705cec0851
This chunky boy can hold plants, pencils, and much more for you while being a happy fella. Every make will be featured on my Instagram add your handle and follow me :) Check out my Instagram if you want to see more designs like this or if…
THANK YOU Mom for being My MOM! You are Amazing and the best MOM ever! Please Give my Mom a HEART she deserves it! My Mom is always sewing and knitting for others. When my Cousins' wife was sick with cancer and lost her hair. My mom…
Something quick, because of course I had to make an entry for the jointed figures competition! This snap-fit model starts as a one-inch cube and flips inside out to reveal a cute, spiderlike robot. Instructions The 3MF file has all the…
Finally, here you see the new Little Grass Drake Articulated, Print in Place, Printable without Supports needed. I printed this model with 100% / 70% / 50% size and it worked fine. I also created a File with separated Eyes. So have fun…
Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
This incredibly tiny fidget uses less than 1.5m of filament. https://youtu.be/1CqIXvbk_vw It's available in the following versions: 3x3 Magnets 3x3mm cylinder magnets Softest click with an optional middle setting. 4x2 Magnets 4x2mm…
This decorative bowl features a knitted look. It is about the size of a large cereal bowl. Print Settings Because of the amount of triangles in this model, slicing times will be longer than usual! To reduce print time, I recommend using…
Kitten Figurine Read.me! Fast and lightweight print. Use supports - very easy to remove. Printed with Fuzzy Skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 If you're interested in the commercial…
Download below the entire cute kitty collection available for free for everyone! The collection contains 3 styled kittens with their own Halloween inspired counterparts - Vamp cat, Mummy kitty & Witch kitten. Complete with Bambu studio…
Please download from Makerworld. This STL is not the latest revision.
CUTE KNITTED BAT - Print-in-place - Minimal supports required Join my Patreon to get full access!
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
These chubby, puffy hearts are designed to look like they’re knitted , but they’re fully 3D printable . They come out with a soft, “stitched” texture that looks great in Valentine colors (red/pink/pastel), gift sets, desk decor, or just…
No AMS/MMU needed! Parts need to be glued in. Join my Patreon for a commercial license and more models! https://www.patreon.com/Smoggy3D
This Young little cattle leans his head to one side Please make sure that you putt some supports under the belly and maybe on the front seeing left horn.
The Knitted Pumpkin is a charming decorative piece that brings the warmth of autumn indoors. Designed with a textured knit pattern, it combines the rustic feel of fall harvest with the cozy touch of handmade crafts. Perfect for seasonal…
Say hello to the articulated sitting pumpkin! Halloween is right around the corner, and there's no better way to celebrate it, than with this cute little fella. It prints in place, and no additional assembly is required. I've included two…
A splitter as already presented here, but not with magnets, but with M3 screws attached to existing threads. It is available in two versions. Once flat and once an arm rotated by 90° in the direction of the spool, in order to be able to…
Meet Milo, the fluffiest little feline to ever grace your print bed! With a round face, tiny paws, and eyes full of curiosity, this chibi cat is ready to lounge on your desk or shelf with ultimate cuteness. ✔ One monocolor 3MF file ✔ No…
Rafts: Doesn't Matter Supports: Yes Resolution: - Infill: 15
We now have a Version 2 Sock Knitting Machine Legare style with Ribber and Yarn Stand. Please check it out. https://www.printables.com/model/355228-circular-sock-knitting-machine-for-my-mom-and-you-…
CUTE KNITTED ELEPHANT - Print-in-place - Minimal supports required Join my Patreon to get full access!
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
⭐ Ditto Figure ⭐ Multicolor 3mf file and normal stl files are included! Also there is a version without its face if you want to paint it yourself! Model is about 40mm high. It can be sized to your liking! No supports needed! Have fun…
i fixed the ears. the original stl ears holes i were messed up. and i smoothed it. https://skfb.ly/69POn Print Settings Printer: mp select mini Rafts: Yes Supports: Yes Infill: 30% Notes: i printed with kitty on its back. raft and…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
More Kittens here . Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/minishev Patrons have access to…
CUTE KNITTED CAT - Print-in-place - Minimal supports required Join my Patreon to get full access!
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) NEW UPDATE: TWO TEALIGHT…
It's a pastry cutter. It's very simple. Height is 5.2 cm, width 6.2 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
The Knitted Cats Vase is a heartwarming and whimsical design inspired by the charm of love and companionship. Featuring two adorable, knit-textured cats sitting closely with a heart nestled between them, this vase exudes warmth and…
Kitten Figurine Read.me! Fast and lightweight print. Use supports - very easy to remove. Printed with Fuzzy Skin effect. Fuzzy Skin: Contour Fuzzy Skin Point Distance: 0.4 Fuzzy Skin thickness: 0.2 If you're interested in the commercial…
Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…
CUTE KNITTED SPIDER - Print-in-place - Minimal supports required Join my Patreon to get full access!
I transformed Hello Kitty into a paint brush holder for my roommate. Supports needed. Pictures show 100% scale with general paintbrushes. I printed her sitting up. Please message if you have any issues :) This model was inspired by the…
Summary This is a model of a Dodge Charger R/T (1969) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the…
CUTE KNITTED COW - Print-in-place - Minimal supports required Join my Patreon to get full access!
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) I used coin artwork from the Pokemon card…
CUTE KNITTED REINDEER - Print-in-place - Minimal supports required Join my Patreon to get full access!
.1mm Layer Height 10-30% infill supports:NO Rafts:NO
We’re kicking off this year’s Halloween season with a cute little ghost. The model is simple to print, requires no supports, and is compatible with an LED tealight or a small light source that can easily be placed inside. The model has…
Check out the full build video here explaining assembly in detail: This case uses less than 700 grams of filament in total and requires a print surface of 230x230mm or bigger. ** A front panel version without the logo is also added in…
15% infill or more 0.20mm Supports on Scale to preference RECOMMENDED TO SCALE UP A BIT
Support free sitting Cat figure ready to print.
A really cute sleeping kitten in a low-poly design. It's quick and easy to print and doesn't require any supports. The model's default dimensions are 200 mm x 110 mm x 100 mm (freely scalable). Printed with the following settings: Scale -…
A high-poly model of sitting capybara. About 45 mm in height for default size. Roughly fits 1:1x scale. → Native Blender file on CGTrader.
AC Power Cord splitter (Kettle Cord) mk1 This was part of my 3D Printer enclosure projects to tidy up the cables on the back of the enclosure. Uses a standard ‘chocolate bar’ electrical connector This design comes with: The body of the…
CUTE KNITTED POLAR BEAR - Print-in-place - Minimal supports required Join my Patreon to get full access!
Created with Blender sculpting tools. Size in the STL is about 103 mm in height. Pictures showing a 75% sized printed version.
OMG STOPPPP 😭🐘💖 I finally printed this elephant I designed and I’m actually screaming It has two versions! 👁 One with separate eyes (no AMS style, so you can print them in a diff color and just snap them in!!) 👁 And one with the eyes…
I designed a 3D-printed version of a spinning skein holder. The spindle is held captive by a small keyed shaft pressed into a 608 bearing. Print Settings: 0.4mm nozzle 0.2mm layer height Supports only on spindle and spindle peg 15-20%…
****NEW IMPROVED VERSION 2**** The model V2 no longer needs an elastic band to hold the bag in place over the open end of the scoop, the clips now do this job. As a bonus, supports are not needed when printing this version. Cat litter…
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
CUTE KNITTED GIRAFFE - Print-in-place - Minimal supports required Join my Patreon to get full access!
Intro This is a mini bit holder with perfect grip! Try it! You will love it! Now in Version V2: A better variable bit fitting that makes sure every bit will fit. Why you'll love it? Variable bit fitting Suitable for all HEX bits Print is…
I was inspired when I saw a similar design online but couldn't find an STL anywhere. I have a job interview today and wanted a way to act happily towards the camera while dealing with the anguish of making eye contact with an inanimate…
An original design cat litter scoop created and tested by Christopher Schiller.
Toy Heart Waffle Iron – Fun for Little Kitchen Chefs! Bring real kitchen vibes into the playroom – no electricity needed, just lots of imagination! This lovingly designed 3D-printed toy waffle iron comes with matching heart-shaped waffles…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to the size you need, no Supports! Another version: https://www.printables.com/model/443953-ergonomic-pet-litter-scoop-no-supports New! Super Scooper Squared!…
Cute sitting bunny with button eyes and knitting texture surface. Made as a multi part print without the need for MMU so you can print it as a singlecolor. Only the button eyes will need to be painted or printed using MMU to make it dual…
I designed Bluey in Blender. One of her sitting and one of her standing. Models require supports.
Meet Eki, your pint-sized guardian of calm and coziness. With wide curious eyes and a round feathery body, Eki brings quiet charm to any space. This owl’s tiny size and quick print time make it the perfect addition to your flock of kawaii…
This Fitting Insert is inserted into the threaded end of the “Y” Adapter PC4-M10 PTFE Connector to reduce the chances of the filament getting stuck as the filament exits the “Y” Adapter and goes to the printer. I printed @EdJohnson's…
Make your own Low Poly 3D models using my 3D Low Poly Generator ! Check out my Amazon Page to see what kind of gear I use to make these models. This is a remix of the Sitting Fox by slavikk .
3D print that makes your princess smile can you imagine having a Louis Vuitton 3d printed bag! https://youtube.com/shorts/QiX06X8ADd0?feature=share Excellent TEST printing ...which makes you understand your printer better! easy to print…
Booenchy, the Halloween Ghost Benchy. You can even put this costume over your Benchy and transform into a hilarious and haunting specter. With draped cloth and perfectly placed eye holes, Booenchy captures the timeless charm of a classic…
These are not as good as buying real release rings that have metall teeth , but they have worked for me without any problems. I am lazy and didn't want to order the extra parts recommended for Brandon Raineris great Over engineered…
Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…
High polygon version, no supports needed, very easy print. Print Settings Printer: Artillery Genius Pro Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 10 Filament: Sakata3D PLA850 Skin Tone 1 Category: Creatures
A tiny guardian full of charm and mystery! This chibi-style owl captures the iconic look of this nocturnal creature with soft shapes, detailed feathers, and a compact design perfect for display. Carefully designed to keep a balance…
A Cute Little Pumpkin Spider For Halloween Decor
Tiny little hello kitty figure to use for decoration
A modular hydroponic tower with hexagonal base. This is a smaller hydroponic tower (dimensions: 36cm x 40cm x 64.5cm). All parts should fit even on the smaller bed sizes. The model consists of segments that can be connected to build a…
A small dog as a decoration for the garden Height: ca. 12cm (Scan with Einstar)
Drain Hole removed, negative volume body improved for easier printing. large overhangs reduced inside the bag. Printed with PETG prusament with 5 % giroid infill and 3 outer walls.
CUTE KNITTED DOG - Print-in-place - Minimal supports required Join my Patreon to get full access!
I print at 70% scale, 0.2 mm layer height with a 0.24 first layer, PLA 210° nozzle / 60° Bed is my go to. Make sure to put the seam on the behind!
The Fat Kitty! Prints without supports, enjoy! Patreon, for license: https://www.patreon.com/c/Stigern
For little makers. Need some magnets and glue. Second thx soap warrior! Category: Toys & Games
Just change the scale to print the size you need. Photos of dual color prints, one using a glow in the dark PLA filament. Please note that printing this model will require supports. COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA…
V2 note : I made a version 2 to be able to print the tail without support. I haven't printed this version yet.
Cat litter scoop. 5mm wide holes. If you print as per picture you should need no supports. Handle and scoop prints separately, then clicks together. Added scoop and handle combined file. I've printed it in pla, but for longevity and…
Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…
Sanrio Cookie Cutter Set - Hello Kitty - My Melody - Kuromi - Badtz-Maru The cookie cutter is around 75mm Its a 2 piece item, one for cutting the cookie dough and one for modeling . Print with 100% infill
I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…
my little cousin wanted a cow, so I drew a cow to print it... in phosphorescent of course.
EDIT: I forgot to add in the name kindly given to my cat by Mark "Velocity Painting" Wheadon ( https://t.co/LF6wu0B4sd ): Schrodinky! A couple of weeks ago, I posted a very cute picture on Twitter of a British Shorthair kitten sitting in…
Little ghost printable without supports. The spirit is modified so that it can be printed without supports and very easily. It is possible to change the speed according to your needs. The model can be set to infill 0% with 3 perimeters.…
Wye? Y? Thinking they really should be wye since that's what they are called in plumbing. ...ANYWAY... Why another wye? Obviously because none quite worked for me. I had issues with friction and really bad luck with crappy imported…
Summary This is a model of a Knight Industries Two Thousand (K.I.T.T.) from Knight Rider in a kit card style. Some characteristic details can be discovered. Equipped with separate spoiler. After printing, the model can be assembled with…
A simple rolling toy for your cat, kitten or child :) You can choose between mouse or fish model (superstructure) and attach a universal print-in-place chassis to it. Just clip the chassis into the animal - it will stay there without…
Advanced Print! You need experience with knitting and 3D-printing to make and use this. Printsettings designed for ∅0.4 nozzle, 0.08 layer - ironing on. Supports may help with the overhang on the stich retainer (core part) - but shouldn't…
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
