Counting matching models…
The Solder Scroll makes soldering more ergonomic by allowing you to just scroll on the pen shaped tool to add solder. By rotating the knob, the tool can be adjusted to accomodate different diameters of soldering wire (0.3 - 1.5mm). A…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Print approx. €7.95–€9.71 excl. taxPreliminary estimate for PETGSource material: PET
I live an an apartment with ancient warped parquet flooring and my Lack based printer enclosure kept wobbling about. I designed these height adjustable feet as a solution! I used 3 perimeters and 20% percent infill at 0.2mm layer height.…
Print approx. €27.16–€33.20 excl. taxPreliminary estimate for one variant
Into the jungle with "JUN" the Jungle Queen There is nothing more beautiful than an adventure. With Jun you can let your imaginative adventures run free. She swims in shallow waters, but the deep sea is not for Jun. Have fun exploring…
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for one variant
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for one variant
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Electrical safety warning: Messing with electrics is dangerous and kills. Please don't attempt to use this junction box if you are not familiar with electric safety procedures and regulations in force in your country. Your safety is not…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET
Multi material version of the Jurassic Park logo. Download all the STL files, then select them all at once and drag them into PrusaSlicer. It will ask to consider them as a single object with multiple parts, say yes. Then assign the…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
I designed a replacement for a broken buckle from a Backpack.
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
A useful HO 1:87 scale tool designed to keep the same distance between the centers of adjacent and parallel tracks. It can be used with both straight and curved track sections. This track tool keeps flexible track in the location desired…
Print approx. €0.93–€1.13 excl. taxPreliminary estimate for one variant
Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure Features Easy to print and to assemble All the printed parts…
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
A simple orange drinks coaster I designed for our daughter. Please do let me know if you use it!
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
This sunscreen / sunvisor fits the frame of my kenwood DMX8021DAB Radio in my Citroen Jumper and helps to keep the sun off my screen. Please feel free to adapt and modify for your needs. I printed it with PETG and a 0.4 nozzle at 0.2…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Literally just a solid 20mm cube. You can scale it to any size. quick printing time aswell
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
The model is a clamping set for fastening workpieces for further processing on different surfaces. A set of clamps consists of three parts: 1. a block 2. one clamp 3. one screw To clamp the workpiece, the block must be placed on a flat…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
You might want to look at my recent Adjustable Exhaust v3 Remixed the Advanced Filtration System Add-on Printable Parts to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to organize our junk drawer we have in the kitchen. I carefully laid out the items to figure out the sizes to hold all of our stuff and then I made a set of boxes that fit snuggly in the drawer to hold each item. I Included the…
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for PETGSource material: PET
I simple tool to remove the screws on the tow hitch cover for Model Y Juniper. One side is designed to fit the screw, the other side is to bend of the cover after loosen the screws. Printed with perimeters set to 4.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Several development boards and breadboards use a 0.1" grid for component and jumper placement. The original author's (Steve DeGroof) design https://www.printables.com/model/675415-wire-jumper-jigs/remixes is the basis of this remix and…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
Length ajustable right angle tool - slide the ruler in and out + straight line tool - place pencil in the hole and go!
Print approx. €4.20–€5.13 excl. taxPreliminary estimate for one variant
Need 3pcs screw 3x20 You can speed up print up to 150% on MK3s
Print approx. €5.58–€6.81 excl. taxPreliminary estimate for PETGSource material: PET
Inspired by the adjustable foot I found on Thingiverse ( https://www.thingiverse.com/thing:3154181 ) I realised my own design that does not need any screws to attach it to the IKEA Lack table foot. The foot just has to be cut down by at…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for PETGSource material: PET
The chamfer tool is printed with PETG and do not need supports. To assemble the chamfer tool, use cylinder screws M3x15 (2x) and hexagon nuts M3 (2x). Adjust the tool on your chisel to get the required size of the chamfer.
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
Sometimes you just have a whole that needs to be covered. Easy solution. Use this print, re-size it and done! For me it was a little gabe in my sink that annoyed me for years…finally i fixed it and was wondering how many of you just need…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Note: added PETg gcode. Meant to use PLA. Is what it is. The two gcode files are not single wall spiral. They are set up for 2 vertical walls. I wanted something a bit beefier. Four different versions for your 3D printing pleasure.…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
When having both the optional “Hinged-Lid” and “Advanced Filtration System” add-on installed, you'll find you have to share 1 connection with both of them. I've adjusted the “Hinged Lid Hinge-Bracket-R” to accommodate “Advanced Filtration…
Print approx. €8.75–€10.69 excl. taxPreliminary estimate for PETGSource material: PET
I used Tinkercad to add three magnet wells on the bottom of the puddle jumper and add extra support for the front magnet. Now as a fridge magnet, notes can be affixed to your fridge or message board.
Print approx. €3.55–€4.34 excl. taxPreliminary estimate for one variant
Why First, I must say that I really love Juggernaut Case products. I had a Galaxy S20 with their case and belt clip, but then I decided that I wanted a degoogled phone, so I went with the Pixel 6 option. But Juggernaut does not make cases…
Print approx. €3.16–€3.86 excl. taxPreliminary estimate for PETGSource material: PET
Spiral Vase Large Mouth Spiral Vase Print instructions single wall vase mode
Print approx. €4.85–€5.93 excl. taxPreliminary estimate for one variant
Whipped this up in Fusion360 to hopefully dissuade some of the mailbox stuffing going on in my neighbourhood. After throwing literally 5 to 6 catalogues and various junk mail pieces straight into the recycling each day for the past month,…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Use the same color filament as your pc case for the best look. You can use double sided tape or similar to ensure no movement but your pc should be rock'n around any ways. Use a nonconductive plastic ruler to measure the gap needed.…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
An adjustable parallel, for spacing or measuring non-standard-width spaces, adjusts between 15*-45mm; (*=28-45mm if the full parallel jaw width is required; the dovetail sticks up above the surface when set below 28mm) Requires a pair of…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
This 3D model is a stackable storage box system designed for Prusa XL 3D printers. It features a removable grid that fits into the box using a docking system with pins and sliders built into the walls. Primarily made to organise small…
Print approx. €15.81–€19.32 excl. taxPreliminary estimate for one variant
Schnalle für Deuter Junior Rucksack.
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 134.63x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm…
Print approx. €2.77–€3.38 excl. taxPreliminary estimate for one variant
My contribution to the PillBox section is this: A 2 row 7 day box, with a slot for the Birth Control Pills (BCP) in the lid. I have previously printed a multiple other of boxes that worked just great. The one that worked the best and is…
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant
HILOOK Bullet Camera Junction Box This model is a custom junction box / mounting base designed for HILOOK bullet cameras (tested with IPC-B141H-C). It allows a clean and professional installation by hiding all connectors and excess cable…
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
Original magnet boxes of JustGo mosquito nets [1] crumble after a single summer lying in the sun, so I designed these new boxes that I printed in PETG. They show to be stronger: after a summer they are still there fully intact. [1] I…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Fibaro dimmers may float in space with all sorts of wires connected. This casing can be mounted to a surface and has a junction block integrated. In the photo knurled nuts are used to screw the lid to the case. In the print file there is…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
Juwel EasyFeed - automatic feeder holder
Print approx. €2.03–€2.49 excl. taxPreliminary estimate for one variant
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for PETGSource material: PET
I had trouble getting the main “left mouse button” to click. It seems like there was a lack of clearance on the parts I printed between the main buttons and the wheel mount. This model gives an extra 2mm of space to the two faces closest…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
Adapter to use the Kreg KMS7215 Micro-Adjuster with a POWERTEC 71536 Router Table Fence: 1 ¼-20 nut needed: the print is interrupted at 10mm to insert it. Connect the adapter to the fence first, at the left handle, then screw the…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Jumper holder Anyone who has ever needed to plug a jumper into a place you can't get to will appreciate this. That was my case and that's why I made this. You can just slide the jumper on, plug it in, and move it to the side to slide it…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
In Australia, the real estate companies are relentless with their junk mail, even when you have a sign - hope this works
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This is a simple, easy-to-use, easy-to-print convolute or parallel tube roller for 1.5" inner diameter kraft paper tubes. The roller has separate, adjustable guides that make wrapping the paper around the form much easier as well as a…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif
Multipurpose legs. They adjust in height and angle. Perfect for adjusting the angle of projectors. (The legs in the photos have been attached with thick double-sided tape.) A slightly curved section is included for easier attachment to…
Update, 3/27/2025: If you want to print this model exactly, I dug up my old amazon orders for the chef's knives and bread knife . I bought the 6 steak knives on the left side offline, and the kitchen shears hole should probably fit most…
Cutie Cloud Jumper Dragon Flexi-Fit (Special Articulated) Model With Multiple Choice Of Wing Designs Based on the dragon cloud jumper from the movie ‘how to train your dragon 2’ - Built with articulated links using my self designed…
This is my model of the Puddle Jumper from the Stargate franchise. It has retractable engine and weapons pods. No interior though. It is little bigger, but in scale with my gates. Here you can see a video about the project includin an…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
Description Adjustable GPU Support Bracket This universal GPU support bracket is designed to provide stable support for heavy graphics cards, such as the RTX 4090, and prevent them from sagging or damaging the PCIe slot. The support…
Update 18th May 2022 16" Tablet version added, requested by a printables user, untested yet. This version needs at least 300x300mm bed size 3D printers like Creality CR10. Including in the folder V1 and V2 front braces. Old V2 legs will…
He may be a baby, but don't be fooled, he's pretty big. This design is easy to print in any material, 100 percent print in place with no assembly - Almost entirely rebuilt from a past design of mine. (Commercial licence is only for…
Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket on your Original Prusa Enclosure. To mount the Adjustable Thermometer bracket you will need the following fasteners*: M3x8…
This remix of the original chain link bracelet is slimmer and thinner, yet still provides enough space to showcase eg. the carbon pattern. The smoother design reduces skin friction for more comfortable wear. It offers a stronger assembly…
This is a cookie cutter in the shape of a cannabis leaf. The shape isn't the most realistic because it's designed to make cookies that don't have any weak areas that would make them too fragile to be practical. Cookies made with this…
Adjustable utility knife Vertical and horizontal versions + 2 Self Tapping Screws M2.6 L8. Horizontal versions: Vertical version: Use 2 Self Tapping Screws M2.6 L8. Note: Follow safety precautions when working with a blade!
UPDATED: VERSION 2 - WAGO connectors now snap in place without moving (thanks to @pulsar ). - Lid screws are now not exposed but hidden in the lid. - Added support for WAGO 221-613 Design This Hexagonal design is meant to help with cable…
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
Center console tray for Tesla Model Y Juniper - might also fit the Model 3 Highland. More pictures coming up. Print it in 0.30 PETG without support. There is a slight overhang on the “wings”. My Prusa handled it fine.
We present Jungle Boy, a three-piece printable airplane with no screws, glue, or complicated assembly—and it flies! It’s designed to be launched by hand or with a rubber band and will provide hours of great fun for both kids and adults.…
Designed to snugly fit a metal bar (or any bar with a 16 mm diameter), these hooks are stable and can easily hold the weight of heavy coats. I printed mine in PLA with these settings: 0.28 mm layer height, 100% infill, and 6 perimeters.…
The arm of the Work Sharp has a tendency to deflect or sag as you apply pressure when sharpening a knife. This simple but effective support block prevents that from happening.
I explored various models, but none met my angle and design standards. Therefore, I've created a new customizable design using Fusion 360 parameters. I designed this model keeping in mind the strength of the wedge and the space needed for…
USB to Dupont adapter This is a simple adaptor to not always solder cables and usb plugs. These are expensive too.. Two single male Dupont pins can be inserted and when it is pluged into USB port you are able to harness power from it for…
Dr Smolder - Glasses Holder (or just his head as sculpture) If you like it --> press like it :-) I remixed the model Dr. Smolder Bravestone - Dwayne Johnson which was designed by 14JS-studio . There are two variants, one which is only the…
NOTE: The photos for this model do not reflect the actual printed STLs provided but are there to show how this shelf functions. There is a photo of 2 examples using the solid shelf + the “even faster” steps provided below using the…
This 3D printable model is a Junk style pirate ship, designed for use in ‘Lying Pirates’, scaled perfectly for the game board. Whether painted or left in its natural finish, this model brings a captivating, tangible element to the 'Lying…
The height-adjustable table or chair height is adjusted by turning the board. I recommend experimenting with the length and distance of the shoulders, the height parameters can change. When folding, I recommend drilling the holes for the…
Enjoy cube drafting? Or maybe Jumpstart? Print some of these! Very low filament utilization (~20 g per inner/outer pair), fits 15+ double sleeved cards, or 21+ single sleeved cards easily. I printed with a 0.6 nozzle in PLA. If you're…
——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…
If you like this model and it's not too much trouble, please hit the ❤ button - it helps out a lot 😀 This is an EDH/Commander tray. If you want something a bit smaller, check out the Compact Commander Tray ! This EDH tray can hold the…
Can it do the Kessel Run in 12 parsecs? Who knows?! This is a fairly simple print in place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
This is a couch drawing board, to allow drawing or reading on the couch while giving places for drawing supplies and remotes. This larger version allows for couch arms bettween 210mm - 270mm / (~8.25 to 10.5 inches). The original covers…
——Work in Progress—— [3 JULY 2025] Uploaded; Base_Top_v2.stl //Modified clearance, can set bearing easier Base_Bottom_v2.stl //Modified clearance, can set bearing easier and able to print without support. [5 JAN 2023] Uploaded;…
A parametric FreeCAD model, within the spreadsheet there are 3 simple parameters: Width - set the width of the nylon strap you wish to make a buckle for EndThickness - set the thickness of the material on either side of the strap Depth -…
https://www.myminifactory.com/users/terrain4print?show=store Access to all new models for $2 per month I have a subscription service on MyMiniFactory, a tribe. I make miniature wargaming and roleplaying game terrain for your home 3D…
Overview : I wanted to replace old, poorly printed jumper wire holders with something that would work well with a tray I made from ½” birch plywood that is carved out in the middle for Clickfinity plates by NoWarranty (…
Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…
This is a 16 sample pack of screw-only jugs with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors
Red bits Gold/yellow drone bits Black/Dark Gray bits Lighter Gray bits Outer olive/bronze bits Painted in PrusaSlicer 2.4.0-beta1; won't work with version 2.3.3 or earlier. Simply load up each .3mf file as a project into [at least]…
This is a model for a bog-standard 4-inch outdoor electrical junction box. It should work great for things like motion-sensing lights (what I'm personally using it for) overhead lighting fixtures, and whatever else you use round…
Recommendation: Supports: on Infill: 10-15% ……………………………… Print however and with whatever you are comfortable with.
A remix of barebaric's design . The primary difference is that it's easier to insert/remove the wire comb into the slots, but it's still secure enough that it doesn't fall out (fitting mechanism is shown in one of the images). Just make…
This support for large graphics cards is the perfect solution for users looking for a safe and efficient way to keep their GPUs in place. Its extendable design allows it to adapt to different card sizes, from 52mm up to 72mm. Fits on any…
Laptop stand for the Framework laptop . Has notches that align perfectly with the feet for extra retention and a cut-out ensuring that none of the fan vent area is blocked. Feels quite ridged and seems to help with cooling a bit. I…
the handle must be printed 2-4% smaller to fit in prfectly or i just made them 100% both, trim iz down with knife and glue it together. my sugestion is to print them seperetly
This contour scribe tool provides a convenient way to copy various shapes. Simply guide either the pointer or wheel end along the profile of interest to draw a matching line at a desired depth. Includes an adjustable chuck that will allow…
Adjustable stand for your tablet.
A small charm with a loop for mounting. Best printed using resin in batches. There is usually a little spoilage in removal when you print this small. Use 1 or maybe 2 sprues per piece. Disclaimer: Please refer to the manufacturer of your…
Important: It is recommended to use a battery booster over jumper cables. If you are unsure about participating in jumpstarting with your vehicle, consult a professional for help instead. In an emergency, use jumpstarting vehicles at your…
A remix of the Every iPhone STL & Adjustable f3d File | ScottYu-Jan & OVERWERK model by @Marlfox_1264389 , but this time with only the phone charger portion. Also adjusted the tolerance of the magsafe portion to be a tight interference…
This versatile remix includes two base options and three cover sizes, providing flexibility to fit multiple junction box configurations. The bases are compatible with all covers, ensuring easy customization. However, the large base…
