57 models
A simple replacement foot for Logitech K120 keyboard. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 120 Infill: 20 Filament: Machines-3d PLA Orange Post-Printing ============= Category: Computer
Replacement for Logitech K120 keyboard foot, print with support
This is a model for replacement Logitech K120 Keyboard's feet/legs. Best printed flat-side down.
This is a replacement key for a Logitech K120 keyboard.
A simple tool designed for a friend, to help bleed your brakes on BMW servo bikes. BMW charges an unbelievable amount for these funnels so this will save you significantly. Replaces the OEM part number #341580 Should work with R1150R,…
BMW K1200 ITB air duct pod filter connectors. This effort was to repurpose the OEM airbox on my K1100 project and utilize the space in the airbox for such things a the main battery and possibly other electronics. Yes, the designs here are…
The SK120 can be found at Aliexpress for about 10-20€. It works pretty well and can be configured to charge all sorts of batteries. It operates in step up and down mode and can generate output voltages between 0 and 36V with an input…
BASIC MODEL: XY-SK120X BOOST BUCK MODULE (0.5-36V 0-6.0A 120W) Just a basic model of the XY-SK120X BUCK/BOOST Module
A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…
The enclosure is a safe way to use the power supply. It has holes for cooling and doesn’t take up much space. It uses an SK120 module, which is a cheap DC buck-boost converter, basically, a variable power supply . To power it, you need a…
Unable to find the locating pin for changing the timing chain of a BMW K1200 I decided to model it myself. Parts number are: 83300401482 and 11 1 842 I tested it myself without any issues with the following configuration: Material : PLA…
I needed a case for the popular SK120 module. I didn't like the designs that were on the Internet and made my own. The SK120 module is tilted at an angle of 60 degrees, which allows you to see the displays on the display well. Print…
Case for 120W power supply module SK120X Корпус для 120W модуля блока живлення SK120X Відео: https://youtu.be/NI3i1t7ZRX0 Category: Other
Confirmed as working with the Logitech K120. It may work with other models but not tested - it's 15mm wide. Ideally print with supports for the hinge pins. PLA is probably sufficient but PETG or greater is recommended.
Printed in PETG, works fine. I don't know if it will work for other keyboards.
Snap in keyboard stands for Logitech K120.
Half height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
Replacement part for Logitech K120 (it might fit other keyboards). It is intended as a replacement for the K120 stand
A replacement foot for a Logitech K120
This is a case for desk power supply using SK120X as power supply and power meter for input voltage (from xt60) the case has vent holes and big space for wires parts list: SK120X power supply binds post voltage meter 4X heat inserts M3 L5…
A replacement leg for the K120 Logitech keyboard. The one marked “Original Size” will exactly match the original length and will fit in the counter-sunk storage slot on the keyboard. The other options, ranging from 1 to 3 millimeters…
The foot on mine broke so I modeled this in TinkerCAD. First model I ever made. The stiffer fit on this was nicer than the original floppy thing so I printed a second and replaced the other foot even though it wasn't broken. They have…
In this project, we share a 3D printable enclosure designed specifically for a DC-DC adjustable voltage regulator module, easily available on Aliexpress. The case is suitable for desktop use and includes the following features: 🔹 External…
Replacement legs for the Logitech K120 Keyboard.
Full height pcie bracket for NVIDIA Quadro K1200 NVS510 P600 P620 P1000 T600 T1000
The Klein Wire strippers do not come with a jaw lock. I made a holster for a tool bag or belt to hold the jaws shut and make the tool accessible. The three pieces should be glued together. The belt hook slides into the main body with a…
Корпус з мінімальними розмірами - замість бананів використовую XT60.
I really liked the fastener less remix of this case from Morris Lazootin, but mostly use XT60 plugs and connectors for all my battery packs and lab equipment. So i removed the holes and support for the USB PD decoy of the rear plate and…
It replaces the upper part of the Swash plate, which is usually one of the first casualty during a firm contact with some sort of obstacle. Printing: The support material is allready fitted to the modell. just print it solid with…
This is a small box for DC converter bought at aliexpress, e.g. here: https://aliexpress.com/item/1005007895660071.html You can add some holes on the backside for inbound and outbound connectors, whichever you prefer for your power…
Here, you can find the listing of this model in english. Bu projede, Aliexpress’ten kolayca temin edilebilen DC-DC ayarlanabilir voltaj regülatör modülü için özel olarak tasarlanmış bir 3D baskı kasa sunuyoruz. Kasa, masaüstü kullanımına…
feel free to watch build video : part list: Banana Socket 4mm 2x Banana Plug to Alligator cable 5.5x2.1 female panel socket 2x L shape angle bracket 30x30x1.5mm ( for battery mount ) symbol included in 3mf file MTS-102 toggle switch 1X m3…
This thing was made with Tinkercad. Work keyboard was broken. Let's see if a new one can be printed. I renamed and sliced the file at 0.10mm layer height. Should work ok. Use supports. The original foot includes a small rubber pad in the…
Drucktips: Übliche Einstellungen für PLA Drucke
I didn't find a case matching my requirements, so i designed yet another case for this module. This was a small project that had to be finished within one day including printing. It nearly worked, except for the USB board working as smoke…
This is a replacement for the Intellichem Jelly Jar Pentair 754000340. These things are impossible to get since the freeze that ravaged Texas. I gave up waiting on the backorder so I made a replacement. Everything to spec and the o-ring…
Had the foot on my keyboard break, so made a new one. Decided to share here. Print Settings: .12mm Layer Height Tree Supports - Touching Buildplate 25% Infill - Cubic I would post a picture if I could, I cannot rn as I don't have access…
Originally published here: LG K4 k120 case by tato_713 - Thingiverse Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable , so pay attention to the file names. If…
I have a Klim TK1200 modular helmet which is super nice and light, but Sena doesn't make 10U style microphone inserts for it, so I designed one. You will likely have to fool around with your print settings for a bit to get the right…
Print size: 254mm x 180mm Feel free to scale it down slightly to fit a smaller bed. I used 3M Self-Stick Adhesive Non-Slip Mat cut to size in each corner to keep it from sliding. Please upload any pics if you make it. ty! If you need a…
Model XY-SK120. This image, taken from our own module, corresponds to the actual XY-SK120.
A small enclosure for an ultra sonic based sensor using the WisBlock Modular System. With two screw openings to fix the enclosure on a wall. Measures distance to the closest object in the field of view and sends the measured distance over…
A compact case that is only as tall as the module itself while having all the input and output I need. It's in 4 part to make printing and assembly easier since it have so many connections. It's a bit flimsy while being assembled, but…
I have made a replacement bushing for the gear lever. It has the same design as the original, and it works perfectly, there’s no play at all. Because of the tight tolerances, you need to have a very precise and properly calibrated…
Keyboard feet modified to clip a Logitech K120 keyboard to a bulldozer steering wheel.
Replacement for the keyboardclip of a Logitech K120. No Brim. No Supports. Printed in PLA with 0.4 Nozzle @ 0.1 Layerheight. Low layerheight recommended for best fitting.
Another small sensor enclosure. Can be used with LoRa, LoRaWAN, Meshtastic or other LoRa networks. Supports a small battery up to 500mA (30 x 35 x 4 mm). Easy wall mount USB access for recharging Required parts: RAK19003 WisBlock Mini…
Compact. Practical. Ready to Mount. I designed this two-part enclosure to mount an SK120 DC buck-boost converter neatly on a 35 mm DIN rail . The enclosure houses the converter while keeping its display, adjustment dial, and buttons…
Корпус для Case XY-SK120X, с клеммами типа "WAGO"
Low-profile GPS/navigation mount for the BMW K1200RS (K589). I designed this mount because I wanted to install a navigation device centrally on my K1200RS without using a long RAM arm or a bulky handlebar mount. The goal was simple: keep…
This riser tilts a Logitech K120 keyboard to a more comfortable typing angle. It lifts the front edge 1.5″ (38 mm) and the back edge 2″ (51 mm). It’s an open truss frame, which keeps it rigid without wasting filament, and it prints in…
This is a small box for DC converter bought at aliexpress, e.g. here: https://aliexpress.com/item/1005007895660071.html You can add some holes on the backside for inbound and outbound connectors, whichever you prefer for your power…
This is a custom-designed 3D printed desktop housing for the SK60 / SK120 module. The enclosure is designed with functionality and ease of assembly in mind. The rear panel accommodates two female banana connectors for input connections,…
