Counting matching models…
- IF YOU JUST BOUGHT a PARTS KIT from KB-3D.com → please go to the following download page for the MK6 : Fun Size KB-3D Build Kit : https://www.printables.com/model/1246713-the-recreator-3d-mk6-fun-size-a-kb-3dcom-build-kit If you are…
Here's a basic keycap set I made for my K95, but will likely be compatible with any Cherry MX based key switch. Includes all keycap sizes as individual files - feel free to mix and match to create your own colour set. The keys feel good…
Cool 3D-printable Iron Man glove and repulsor you can wear!
Remix of the OEM cap generator. Credit goes to DesignersMind. If you have a 65% of 75% keyboard, then you'll know how difficult it is to find a cheap keycap set with 1.75u shift key. I've included their original file and a file that I've…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one. Dimensions are approximately 140 mm x 55 mm x 5 mm. It provides room for up to…
BACKGROUND: The Palm Pico Paddle is infamous amongst portable CW operators for its small size, good feel, and cool retractable case. Unfortunately, they have been out of production for years, and they sell for much more than their…
I wanted a compact way to store spare nozzles, but nothing I found matched all my criteria: Gridfinity compatible and stackable Compact with maximum storage capacity Designed for Ankermake nozzles This bin will store 16 Ankermake nozzles…
Volume knob protection for Quansheng radio UV-K5 & UV-K6 Print Settings Resolution: 0,1 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button Layer: 4 Infill: 15% - Honeycomb Supports: No Rafts: No Filament: Any
The Recreator3D.com –MK6 : FUN SIZE - a KB-3D.com Build Kit Experience - Turning PET1 Bottles into Filament! BUY A KIT HERE!!! 🚀 KB-3D's Impact on the MK6 Kits Since 3DPrintopia 2024 , KB-3D has helped take the Recreator3D MK6 from a DIY…
Reposted this 'cause it looks super freaking awesome, and because I realized there are no K6-3 helmets for dummy 13 on Printables. I mean, how? It's such an iconic piece of armor and no one made one for the dummy 13. The helmet that makes…
Print with 0.15mm layers from any material. 100% infill recommended though it probably prints it filled in anyways due to the parts size.
Love your K6ARK morse code paddle, but want more mounting options? Look no further. Simply print one of these three 3d printed plates to suit your needs; the angled ones for a right or left leg strap, or the straight one for a desk mount…
Unable to find a good antenna winder for portable amateur radio operations, I started tinkering with designs. A few iterations in, I came up with this one, then parsed it down to just a wire frame for minimum weight. Dimensions are…
Plastic cover replacement for the jacking point hole in the side skirt of a Ford Fiesta MK6 ST150/XR4 2004-2008. There is one version for front right (FINIS 1354162) and one for front left (FINIS 1354166). It is not an exact replica but a…
Ford Fiesta/Fusion MK5-MK6 (2004-2008) Hood Prop Rod Clip Also work on Ford Escort/Orion 1994 (Thanks @DavideRusso_3941551 ) Print from PETG/ASA/ABS Infill 40-50% Support needed!
An improved top fan for the GMKTEC K6. The fanmount.stl is desiged for the noctua NF-A12x25 5V PWM fan that can be directly connected to the internal mainboard with a little modification (the wires on the connector have a different…
Base for Quansheng radio UV-K5 & UV-K6 Previous version: https://www.printables.com/it/model/685423-stable-base-quansheng-radio-uv-k5-uv-k6-v1 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button…
I've done a few versions of this, hence the Mk6. My cat has a tendency to see a toilet paper roll, decide it's a good snack, and take a couple bites out of it. So, I built the TP Protector Mk1. It was iterated on a few times, and recently…
If you purchased an android headunit (Teyes, Mekede, Junsun..) for your vw golf you get a pair of usb ports. This adapter lets you mount those usb ports behind the gear shifter. I mounted mine just with friction but if you want you can…
Needed to replace a ruined button so i created this replacement. I uploaded the STEP file so you can remix however you want without those useless STLs. Print it laying on its side using supports!
MK6 Golf paddle shifter extensions, these were 3d scanned around the factory paddles and just need a couple pieces of double sided tape to secure.
Ford Fiesta/Fusion (2004-2008) Diesel/Petrol Fuel cup bowden. Print from flexible filament (TPU/TPE/Ninjaflex etc.). Infill 30-40% Print Cut out the original hard plastic ring from the cup. Use a little grease on the ring for freely…
Please note the license for this design! It does NOT allow for commercial use. This case is designed to fit version 0.41 of the Sidekick64 cartridge for the Commodore 64 and a Raspberry Pi 3B+. Additional material required: 4 screws…
K6 (Kiosk No. 6) . Red Telephone Booth. It was designed by the British architect Sir Giles Gilbert Scott in 1935 to commemorate the silver jubilee of King George V. The K6 became the most widespread and recognizable version, and it is now…
The plastic bolt was clipped on the original stand adapter, can be taken off by force. https://fifinemicrophone.com/products/fifine-k683a-type-c-usb-microphone
I didnt like to store it with the handle attached as this might introduce constant pressure on the bearings. Storing opened might expose it to dust. So I came up with this design. For travelling simply put a rubber band around to secure…
Perfect fit with no rattle car mount for your Quansheng UV K5/6/ Plus radio on the passenger side ( in my case a Volvo S60 2006) Locks in nicely with a satisfying click with no shaking or rattle while driving. Use double sided foam sticky…
Please note the license for this design! It does NOT allow for commercial use. This case is designed to fit the short version of the Sidekick64 cartridge for the Commodore 64, made for the Raspberry Pi Zero 2. Additional material…
I really like the K6ARK morse code key, but I have managed to break a couple of them by carelessly storing them in my kits. This case prevents the paddles from being touched while stored. It is designed to hold the key in the case with a…
These bushings have been designed to enhance the shifting feel of VW manual transmission vehicles, allowing for more precise and crispier feeling shifts. This is a remix of Alberhasky_Designs ( Volkswagen MK7 GTI Shifter Bushings ) I have…
My 2006 Fiesta windshield water reservoir cap just crumbled in my hand. So I decided to design and print my own. This is my third attempt: in the first one, I messed up the dimensioning a bit, second one went better and actually mounted…
Low Profile PCI Bracket Quadro K600 If using in a dell server, will need to thin the bracket at the 90. But if using in a desktop, it should not matter. Category: Electronics
I print these in PETG @ 100% infill. These are good for CT40 and HSK 63a Tools. Also is a great way to hold tools off of the bench top when kitting.
I like the Morse Keys from Adam, K6ARK and wanted to secure them from damage, when not in use. Adams original model is: https://www.printables.com/de/model/332611-morse-code-paddle-cw-key/files The cover is designed as “Snap-On” to the…
Housing for a Morse Code Iambic Paddle. See original for full assembly instructions.
Desktop stand for the K669B Microphone
I wanted a way to keep all of my accessories together with my Kingrinder K6 when not in use. I didn't need it to be able to “travel” as most I've seen posted as I wanted the accessories more easily accessible. I did see a stand by quorth…
>> The Project is finished now << >> Version 7 (v7) solved a lot of Problems so far<< all holes match properly now to each other New M3 & M4 Set Stronger and thicker Body Higher Motor Adapter in Version 7 for mounting a ¼ Inch Bit Adapter…
A simple way to store your grinder handle when you aren't using it. Only tested on the KINGrinder K6 Made with OnShape. Edit it here:…
This is my take on an K6ARK EFHW linked 80m antenna winder. It will accommodate 2 velcro tie wraps to keep everything tidy and is big enough for my big hand to fit in and to wrap some 550 cord on as well. However is still small enough to…
A case for a buckconverter/regulated power supply with usb connector. There is also one magnet on either side for easy storing of for example a screwdriver. Supplies: SK60 SK120 DC Buck Boost Converter = Aliexpress Female Barrel…
Stable Base for Quansheng radio UV-K5 & UV-K6 - V1 New Version: https://www.printables.com/it/model/695481-stable-base-quansheng-radio-uv-k5-uv-k6-v2 Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4…
The battery in my K63 wireless keyboard I use with the K63 Lapboard died and was replaced under warranty by Corsair with the new K65 Plus. Unfortunately they no longer make anything that is ready to clip into the lapboard, so I decided to…
I made this phone stand that easily attaches to the Corsair K65 / K70 RGB (Mk 1) keyboard. It may also fit other corsair keyboards with the same tooling. I provided different sizes as .stl in the downloads, but you can also do your own…
The Vaikin Box - VK6 Half Tray Travel Case is a free sample from our Kickstarter campaign for Vaikin Box 3D: Printable Portable Modular Storage System . While it was made to work with the Vaikin Box VK6 as a half tray insert with locking…
Compact case for Riden RK6006 power source V0.2B - one piece cover V0.3 - separate body and back cover (easier assembly) V0.3A - cover with banana holes distance 17,4 mm V0.3B - cover with variable banana holes distance (socket) 18,0 -…
Remixed from https://www.thingiverse.com/thing:3769718/comments Modyfield construction, and working good ;) Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: you choice…
3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
The LED holder on the floatbox site does not fit sk6812 LED strips, which was my preferred choice of strip for this build. SK6812 has excellent output since it has a dedicated white channel. I've altered the interior slot to accommodate…
Important notice Thoses models cannot be used with a Apple Extended Keyboard ISO version (e.g. The azerty one). All the switchs location are shifted and required both different plate design and case design (Holes aren't compatible with…
Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.
This is my take on Adam Cook's design for motorizing a manual coffee grinder! My goals for this remix were to use a more compact and cheaper motor, to add RPM control, and to make the controls more accessible. Please note that the…
Egg holder for 13 eggs.
This model is a remix from Thingverse of “CoolDPS DPS5005 Power Supply” by jopereira , Original design . Model is designed for the rk6006 PSU module, I expanded the design to accommodate an internal power supply. Warning 230 Vac mains are…
english On our Siemens egg boiler, which is over 20 years old, the egg support has practically disintegrated over time due to heat and lime exposure. I traced the part, which is no longer available as a spare part. In several development…
I modified the gripping smartphone holder so that it can be used on a Ford Fiesta (MK7) with a CD Drive. Please print it in PETG or ABS, as PLA might melt in the summer. add rubber bands on the arms of the smartphone holder to increase…
While designing a holder for the Samsung S25 , I ran into the problem that I wanted a fully 3D design without using supports. At the same time, I needed a clean and stable way to connect a ball joint socket to the flat back surface of the…
Overview This is a Magsafe charger for a MK6 VW GTI. Created using a scan of the car shifter area taken with an iPhone app (scan in files section). The charger mounts using only friction, so no holes and no glue to damage the car's…
Compact case for Riden RK6006 and DPS5005 module, perfect to reuse an ac adapter from an old laptop or other types of PSU. Required Material for the variable PSU: 8 self-tapping screws: 4/5 mm head and 3/2.5 mm thread with at least 1cm…
If you purchased an android headunit (sony) for your vw golf you get a of usb c ports. This adapter lets you mount those usb ports behind the gear shifter. I mounted mine just with friction but if you want you can add a little bit of hot…
This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8 Buttons: https://www.aliexpress.com/item/33001974422.html LEDs: https://www.aliexpress.com/item/32960205936.html…
This are stackables Insert Boxes for the Eurobehälter /Eurobox TK400 and TK600 /75 /145 etc. Settings Value Infill 15% (adaptive cubic) Perimeters 2 Layer Height 0.20 mm Speed Material PETG / PLA Supporting Material none Comments printed…
This takes the design of the K6ARK winders (which in my opinion are the best antenna wires that exist) and turns it into an X shape for use with antennas with a female BNC connectors. I made them to support my line of End fed antennas…
The label needed for the label + stack version. https://www.printables.com/model/521520 If you like what i do, please consider throwing a few breadcrumbs my way :) https://ko-fi.com/duckers
I used Orange Prusament PETG. This would work fine with almost any filament. No supports are needed. BOM I used the following parts..: 2 x M3 thread inserts 2 x 10mm x M3 cap head bolts 4 x 3mm washers 2 x 3mm Fork connectors Small amount…
Created this adapter that allows you to grind directly into your Picopresso basket! You take the basket, basket holder, and funnel and screw it into the bottom of the adapter and then screw the other side to your K6. Take note there are…
Want a manual style shift knob in your automatic mk6 or mk6.5 VW? Look no further! Shift knob adapter for automatic style transmissions to adapt a different, or in my case, more comfortable shift knob. Simply pull the shift knob…
This is essentially a 3d printable version of this part, mine wore out and I didnt feel like paying $15 AUD for a small piece of plastic: https://www.thevisorshop.com/en/au/AGV-Click-Visor-Mechanism-Clip-K6/m-38291.aspx?gQT=2 I printed in…
perfect fit for fiesta mk6 vent ring, just use some sticky tape to hold them in place. i have the type that dont easilly pull out and it looked like a pain to have to dismantle the whole dash to replace them. this just sticks on top and…
This remix adds a plate to the left of the hotend on a Recreator 3d MK6 Funsize, replacing the mini spooler. This plate is designed to be used with the included bottle cutter and has the appropriate matching M4 mounting holes, however…
Had my clip break, and while waiting for a metal replacement from AGV I designed and printed my own. Printed in Nylon. Would recommend a stronger filament such as Nylon, ABS, or ASA. Requires supports It fits fairly tight and may need a…
This is an x shaped variation of Adam Kimmerly (K6ARK)'s excellent antenna winder. If you have an antenna with two wires such as an end fed random wire, this will work great for you! I originally made this for my Tufteln speaker wire…
Kleiner ARC Reaktor für meinen Voron Zero “IronMini”. 24V LED die einfach an das 24V Netzteil mit angeklebt werden können. Base gedruckt in ABS Silber von eSun. Diffuser gedruckt in transparenten PETG Blau.
From Donkey Kong 64, modernised (non-polygonal) look. Not happy with how I split it up... it mostly works, but it's not nearly as fool-proof as I want it and relies of the flexibility of prints to force the head on the shaft.
Thats... something to not take serious. https://www.thingiverse.com/BillieRuben/about did a micro keyboard thing with her Anycubic Photon, and i thought to reproduce that (more or less) on an FDM machine. Its nowhere near the quality, and…
What is it? A mod of the Recreator 3D Mk6 fun size that can fit the stock ender 3 PSU. I have increased the length of the side wall pieces, top and bottom to accommodate a stock PSU from an Ender 3 or possibly a comparable printer. Why'd…
I made mud flaps because buying them is way too expensive, and non of the options look subtle enough. Printed with TPU with 1mm nozzle, 100% infill. Tested in all weather conditions for a full year, from +40C to -40C, on gravel, sand,…
This is something I've been working on, and have used, for quite some time. I wanted to create a whole-enchilada approach to a QRP EFHW antenna that allows me to not have to take anything apart. With this design all that is needed is to…
The standard gaiter ring on my 2005 Fiesta was a bit tatty, so i designed a new one to print in the same blue as my car! 100% infill. no supports, concentric first layer for a nice finish.
This is a Knomi V2 mount for the Skeletor MK6 and upcoming MK7 toolhead mounts. This will require slightly longer M3 screws to mount through the bezel and cap, through the stock fan and into the MK6 or MK7 mounting points. Link to…
Condole divider for the MK6 GTI (2013). This allows to separate the center console change bin further out into 3 different sections. The dividers are removable to allow different size items to fit. Straight forward fit, won't have to…
Enclosed my Laser-Engraver
Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black dark blue 10 light blue 15 white 23
I love the original Morse Code Paddle / CW Key that K6ARK made. I was trying to get the contact distances closer but had trouble with the pressure from my plastic springs not being enough. With magnetic returns I was able to get the…
I needed a bench power supply and some research turned up the excellent Riden RK6006 and RK6006-BT (bluetooth). Found a new old-stock blower-fan in my stash and built an enclosure around the RK6006, the blower fan, banana jacks, dc-dc…
Adam’s (K6ARK) Mini Microphone is the gold standard for ultralight portable radio setups. This slimmed down remix reduces weight and refines some features. Differences of the remixed enclosure compared to the original: Improved front to…
Habe einen Schalthebel für meinen Fiesta konstruiert. (Natürlich nur für den gebrauch auf Privatgelände ;) ) ist zufällig genau dieser Durchmesser der so etwas stramm aber dennoch gut drauf und wieder runter geht. Die Manschette kann…
I needed a tweeter adapter for a Ford Mustang MK6 so I could install bigger speakers. I forgot to make more photos before installing them, but they work just fine. I also attached Fusion360 save for anyone who wants to remix it. At the…
I got lots of binding on the original gears for the Mk6 recreator, even without a strip in the machine. So I thought a set of herringbone gears would help keep them from rubbing on each other and binding up. They are based on the stock…
A coinholder to suit Australian coins for the cupholder of a VW Golf Mk6. It sits snugly and is removeable. It holds all denominations from 10c to $2, and is 42mm deep, so it will hold around 25 10c coins, through to 13 $2 coins.
A tiny and portable RK6006 power supply with USB-C PD trigger input on one side and two safety banana plugs on the other. I marked this as a remix of this DPS5005 case because I pretty much copied the ultra-compact design, though it is a…
Replacement part for the microphone mount-point of the Fifine K669 USB Microphone tripod. Interior walls are extra thick to improve the strength and reliability. Print instructions Print Settings Rafts: No Supports: Yes Resolution: 0.2mm…
Box for the new Riden RK6006 power supply. In the back is XT60 connector for input power. I recommend using PET-G or ABS. Tested with only 0.4 nozzle, but I think 0.6 should be fine too. Modifications and upgrades are allowed and…
Funnel to help pouring the beans into the grinder. The funnel fits inside the grinder (not around it) and guides the beans into the grinders. With this funnel, it makes it easier to pour the beans into the grinder and avoids any spillages.
This is a model that I made to learn a bit about 3D modeling. Not very sophisticated but hey, it works! Fits a Kingrinder K6 with its handle. I have seen online that some handles are different, but if yours is not like mine I hope you can…
The clips for a wrist rest that attach a it to a Corsair K68 keyboard are fragile. These are replacement clips you can superglue on if yours break off. make sure the surface is smooth for mounting points on keyboard. I printed these with…
Are you hesitant to upgrade your MK3 to a MK4 because of all the old printer parts you'll have left over? Are you also interested in printing with PET bottles? well this remix should address both of those needs! Your old MK3 parts can be…
Replacement keyboard feet for the Kemove K61 Snowfox.
an adapter to mount a fifine K669B mic
