Counting matching models…
A kaleidocycle that prints-in-place! No need to assemble anything; the kaleidocycle comes out of the printer bed ready to use. And no need for supports either. Enjoy! Print instructions The models shown in the photos were printed in PLA.…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for one variant
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Print approx. €3.67–€4.48 excl. taxPreliminary estimate for one variant
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
Features Honeycomb discs create a kaleidoscope pattern Spin the discs to choose your motif Easy to print and assemble Easy to disassemble and clean Custom Display Stand available Kaleidoscope Coaster Holder Print Instructions Nozzle…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
A neat box with a unique opening mechanism. Follow the original inventor on Instagram https://www.instagram.com/degreesoffreedomco And visit their website! https://www.enjoydof.com I reverse engineered this model by watching this reddit…
After a few failed attempts at trying to print ecoiras kaleidocycle I decided that I should try and design my own and so I did although I used the same features and design I constructed my own model from scratch, It is designed to be very…
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
I thought the [Print-in-Place Kaleidocycle](https://www.thingiverse.com/thing:4761150) by ecoiras was ingenious and wanted to see if I could make something similar - if a bit less stylish.
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed…
Update 7/8/2022: I adjusted the scaling down uniformly to 65% scale in the Cura slicer and printed at 0.20 layer height using 100% infill. It took 1:52 minutes to print (80mm/s print speed, 40mm/s wall speed, and 100mm/s travel speed). It…
I planned to stop at a dozen egg designs this year, and then, yeah, nope. I've provided OBJ files rater than STL. The STLs had errors that PrusaSlicer fixed by converting them to OBJ. Both halves of the egg can be printed “right side up”…
I wanted to print one, but 5 hours printing time was too much... ... Scaling down obviously messed with tolerances and clearances. => redisinged and remixed it from scratch with 5 to 6cm diameter, resulting in about 2h printing time.…
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Only for those without M2 screws no other reason to print this instead of original. THE FIRST FILE HERE: https://www.prusaprinters.org/cs/prints/13780-mobius-kaleidocycle-box-kinetic-ring-box…
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Here's a new design for the holiday season. The ornament has two patterns that alternate. I was able to get reasonably good prints by printing the ornament as a single piece, but by cutting the ornament in two, I reduced print time and…
Summary The kaleidocycle is unique among compliant mechanisms for its ability to undergo continuous rotation. Most compliant mechanisms are able to flex back and forth over a certain range, however, the kaleidocycle's arrangement of…
I added the voronoi pattern to the original model.
I've re-envisioned my Grand Kaleidoscope Ball as a teardrop, going back to my original files and redesigning it from the ground up. The ornament looks dramatically different from each angle. I've printed it here in 2 pieces. The first 3…
minimal frame interlocking chainable kaleidocycle hinge segments - print 6× (8×,10×,12×) with < 0.1 layer - use brim
KEEP MAGNETS AWAY FROM SMALL CHILDREN. Magnets can come loose. If swallowed, magnets can be FATAL. ABOUT THE DESIGN Another fun Easter Egg design. It has a tall, narrow pocket in the inside where you can hide a fun surprise. It uses 3x2mm…
This is kaleidocycle structure designed for printing with flexible material. I printed without support using Bambu lab X1C and SainSmart TPU 95A hardness.
I set out to create internal parts for wooden kaleidoscopes that I will turn on my lathe. What I ended up with is a fully functional kaleidoscope that can be used as printed or it can be easily clad in wood, leather, brass or whatever you…
Features I made a stand for placing marbles used in the marble machine "Kaleidoscope" by Yoshiyuki Ikeda . Size of a marble : 11mm (Marbles recommended by Yosuke Ikeda → Matsuno Hobby M1263 Glass Marbles, Made in Japan, 12.5mm ) Thing…
Holder for my Kaleidoscope Coaster Features Allows to use the coaster as decoration while highlighting its beautiful visual effect Print Instructions Nozzle diameter : 0.40mm Filament : PLA, PETG Holder Default 0.30mm DRAFT Print settings…
This is the first in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be…
This is a variation of the Mobius Kaleidocycle. The changes are as follows メビウスカレイドサイクルのバリエーションです。変更点は以下のとおりです。 The distance between the hinges has been reduced to 22 mm by improving the shape. The length of the hinge is 50 mm, whereas…
This is the third in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want to…
Yes, this needs supports. Use organic supports. An overhang angle of at least 30 degrees works well. I use a support blocker on the top loop. It prints better with supports, but it prints well enough without them. I use just a single…
Stargazer Stargazer is a 3 mirror Kaleidoscope, or to be more precise, a Teleidoscope, as the mandala-like patterns are the result of the outside world being reflected over and over again. It prints without supports and is easy to…
Update 5/30/2023 "round MK7.step", "round MK8.step", and "round MK9.step" have been added. I have not yet checked if they can be assembled, but will check later. “round MK7.step”、”round MK8.step”、”round…
This is the last in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want to…
I made a 3D model based on the following paper. 以下の論文を読んで3Dモデルを作ってみました https://www.pnas.org/doi/10.1073/pnas.1809796115 Following are links to related information. 以下は関連情報へのリンクです。…
This is a variation of the Mobius kaleidocycle. By changing the shape of the hinge and eliminating the gap, undesirable deformations have been eliminated. Compared to previous models, this model is the closest to the correct movement of…
This is the second in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! If you want…
Inspired by degreesoffreedom's (enjoydof.com) kinetic ringbox, and the physical mathematic it represents, I did a study on kaleidocycles in general, and couldnt get the mobius kaleidocycle out of my head! So i decided to recreate it using…
This is a variation of the Mobius kaleidocycle. I changed the shape of the hinge so that it does not use bolts and nuts. I also modified the Fusion360 model to reduce errors when changing parameter values.…
Summary Based on the Kaleidocylce, this Kaleido-flake is perfect for winter. Using several assembled compliant mechanisms, this kaleidocycle-snowflake (Kaleidoflake) is unique for its ability to undergo continuous rotation. Learn More…
This is a variation of the Mobius kaleidocycle. The basic unit is "disphenoid". メビウスカレイドサイクルのバリエーションです。基本ユニットの形を"disphenoid"にしてみました。 Please read the following for detailed instructions. 詳しい説明は以下を読んでください。…
The unique feature of this kaleidocycle is that each unit has a different length. A normal kaleidocycle is made by combining six identical units, but this kaleidocycle can be rotated even though the units are of different lengths.…
I printed one Kaleidocycle from Vitroid , but after I break some hinges, i ask the basic shape in scad, and redesign the hinges. I used 25mm d=2mm metal bars for rolling point. Print instructions Need a lots of support. Because the small…
This is a variation of the Mobius Kaleidocycle. I made a large-sized one. Having made a prototype, I found that making the model larger does not necessarily avoid undesirable deformations. メビウスカレイドサイクルのバリエーションです。大型のものを作ってみました。…
Because Webcam Covers are Boring Apparently you should cover your webcam when you're not using it. Why use tape when you could use a kaleidoscope instead? This is an attachment for the popular Logitech C920 web cam - it just slips over…
Kaleido quer Version 2 ist Fertig. Die Längs Version wie auf de m Bild hat noch ein paar Bearbeitung (Rundungs nearbeitung und verfeinerung nötig)
A small fidget toy I created. The current design has a small issues with the hinge. The layers tend to stick a little t
Seams need to be set to “random" wall generator be set to “Arachne”
Put it on the board to show you the directions to count.
Abstract caleidoscopic round winterwonderland
Here are the files to put together a frame for your Kaleidoscope tunnel. This is a lighter weight and cheaper option then making a wood frame. I don't like when LED's shine in your face. This way you can put the LED's into the frame so…
Welcome to the Kaleidocube , a fascinating intersection of topology, spatial geometry, and 3D printing! This project is an exploration of a reversible chain puzzle. It consists of 12 identical non-regular pyramids (tetrahedrons) connected…
Besonders ästhetisch in allen Prusament Transparent-Galaxy-Sorten! Meine neue Lieblingsfarbe: PETG Kaminrot. Die darin befindlichen Glizerflocken ergeben mit den Fressnelllinseneffekt wunderschöne Kleinst-Regenbögen-Kalleidoskop Effekte.…
Model of Louis Wain's Kaleidoscope Cats III. Imported image into Adobe Illustrator and used trace function. Saved as SVG and uploaded into Tinkercad. I like to print the base layer in a contrasting color. I also have a cool color changing…
a simple adapter to use standard 4 inch dryer duct to vent a Kaleido M1 lite coffee roaster. Have not tested for longevity, use a high temp filament if you are going to test this and never leave a hot roaster unattended. Needs a duct fan.…
A piece to fit a cardboard tube, then have a disc secured to it with a folding brad.
This is the first in a series of Christmas balls based on kaleidoscope patterns. I've provided my PrusaSlicer project files (3MF) and GCODE for a Prusa MK3s+ printer. With my settings, the final ornament weighs very little! I'll be…
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
https://www.patreon.com/posts/33441312
https://www.patreon.com/posts/34844921 https://www.patreon.com/posts/33992294
