Counting matching models…
Full credit for the STL goes to 3_D_M_A on Thingiverse . I simply took the original and sliced it up with the M600 command to accommodate color changes easily. People asked for it so I'm posting it here on PrusaPrinters since the file is…
This was painted in Bambu Slicer for the AMS with four colors. Rather than just painting each layer a different color, I tried to match the original print as much as possible, including painting on some details on a few layers. I painted…
I saw a multicolor of this great model posted on Reddit, and needed to print this. Unfortunately, the multicolor version by MrSaiclops only imported geometry into the Bambu Slicer. So I looked at the main photo, and manually “sliced” the…
I found this model originally on Reddit, that author sent me only the gcode, so all I could do was drop it on an SD card and print it, but it was a 3-color variation. Then came along @saerian and did massive amounts of work to actually…
High quality lithophane of the famous painting “The Great Wave off Kanagawa." Built-in arc to allow for printing vertically for best quality. Print at 0.16mm layer height, 99% rectilinear infill, 12 vertical shells, keep print speeds low…
“MAJ : on m'a informé le 28.06.2023 que le STL s'ouvrait sur Pusaslicer, BambulaStudio, mais pas sur CURA, j'ai donc créé un nouveau fichier STL V2” La grande Vague Kanagawa Art3Dchoix 3D PAINTING version Hokusai, HUEFORGE Généré avec le…
This model is intended for the 8tool INDX upgrade for Prusa CORE One+. The model with the sample photos was printed with these 8 Prusaments: Pristine White Vanilla White Marble Grey Royal Blue Azure Blue Gentleman's Grey Mystic Brown…
This is a simple 3-4 colour multi print. Use higher bottom and top shell (4 or more) count at .2mm layer height and 15% infill for fast and impressive results. The boats aren't separated very well and I will update a better version soon.…
I couldn't load @CB_110818's gorgeous 4-color Great Wave remix 3mf file ( here ) in PrusaSlicer, so I imported the original STL from Thingiverse ( here ) and colored it myself. I printed it on a Prusa MK3S+ with MMU3, in PETG. I used…
This is a remix of the original model Great Wave off Kanagawa by 3_D_M_A , who did an superb job creating a 3D interpretation of Hokusai's art as a stack of layers. I have simply added a colour change at each of those layers. The change…
This is something I designed to hold keys by the front door. I was inspired by the artwork "The Great Wave Off Kanagawa" which was a famous Japanese print series. First I took the actual artwork and converted it to 3d using…
lithophane Poster Legend of Zelda Great Wave Off Kanagawa Nintendo Voici un lithophane d'un magnifique poster de Legend of Zelda, inspiré de la "Great Wave Off Kanagawa". Faites vous plaisir ! This is a lithophane from a beautiful Legend…
This variant replaces the M600 commands with changes to extruder to make it easier to print on a Prusa XL or an MMU2/3. The colours are setup like this: Extruder 1: dark blue Extruder 3: light blue Extruder 4: white The model shown in the…
Printed with 5x PLA. If you want to use it with less heads take the .3mf file and change it to your liking. Print time is very short on the Prusa XL (<90 min).
This is to go with my 6-color painted Great Wave off Kanagawa model. No backing for this one, to be used to fit a tan background or a HueForge panel of the tan background to fit closer to the original painting. No LEDs for this frame. I…
Custom cover for the MasterLiquid ATMOS customization. Kanagawa River pattern to show of your build. Can be printed with different colors by changing the filament. See also https://www.printables.com/model/86953-wavepattern-coaster
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: Print at…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: rint at 100%…
Un très beau cadre mettant à l'honneur La Grande Vague de Kanagawa et le 3DBenchy
Pochoirs à effets (Bois, Voronoi, Panda, Vague Kanagawa, Lettres, Vague..)
The Great Wave I adapted Hokusai's Great Wave into a 200 x 200 mm filament painting. Thin layers of Translucent Blue over white give the pale foam, over charcoal the deep navy, and over orange the dusky sky. What you need This is not a…
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm. Swap procedure: Initial filament: Black Switch to the next filament at layer #10 (0.88mm): White Switch to the next filament at layer #12 (1.04mm): Sky…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: The Model is…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: rint at 100%…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: Print at…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: Print at…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: Print at…
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm. Swap procedure: Initial filament: Black Switch to the next filament at layer #10 (0.88mm): White Switch to the next filament at layer #12 (1.04mm): Sky…
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm. Swap procedure: Initial filament: Black Switch to the next filament at layer #10 (0.88mm): Gray Switch to the next filament at layer #15 (1.28mm): Cyan…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: The Model is…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: Print at…
Hello everyone, this is a hueforge, inspired by the classic art of Hokusai. I made several colour variation, and each of it looks quite good, so feel free to experiment with different colours, it will turn out nice. Printing: Print at…
The Great Wave off Kanagawa (Japanese: 神奈川沖浪裏, Hepburn: Kanagawa-oki Nami Ura; lit. 'Under the Wave off Kanagawa') is a woodblock print by the Japanese ukiyo-e artist Hokusai (1760–1849), created in late 1831 during the Edo period of…
A woodblock-inspired lithophane bookmark featuring a heroic cat set against the iconic Great Wave off Kanagawa. Designed in portrait orientation to standard bookmark proportions. Print note: this is a two-colour print. You will need to…
Print with 100% infill and a layer height of 0.08mm. The base layer should be 0.16mm. Swap procedure: Initial filament: Black Switch to the next filament at layer #10 (0.88mm): Gray Switch to the next filament at layer #15 (1.28mm): Cyan…
Introducing my second artful shadow box using Hueforge , the filament painting software. It's a reproduction of " The Great Wave off Kanagawa ". The original artwork is a woodblock print by Japanese ukiyo-e artist Hokusai, created in late…
Bonjour. Je vous présente mon interprétation de la vague de Kanagawa. Avec l'ajout d'un benchy, inspiré d'un modéle de Satyr. Je l'ai entièrement retravaillé et colorisé pour une impression sans MMU avec un changement de couleur toutes…
Imported STL into Blender, simplified to be under Tinkercad's polygon limit, imported into Tinkercad, exported as SVG, cleaned up in Inkscape
