181 models
Update Jan 2024 - I added a third version (v3) with a center square and fewer connecting lines for faster printing / less filament usage! Update - I added a second version with connecting lines for faster removal from the bed Since bed…
Print approx. €0.14–€0.18 excl. taxPreliminary estimate for one variant
A small orgainzer for the kitchen. The depth is only 104 mm, so it fits in the narrow cupboard above the stove. There is also space for the small baking flavor bottles. The depth for the baking powder compartment is 73 mm. The small box…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for one variant
My mount for my Hammerhead Karoo2 broke and I printed the version from c10l, but recognized some necessary improvements to the fit of the Karoo2. The tension of the PETG is a little bit increased by lifting the locking latch and I…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Oscillation Overthruster : Buckaroo Banzai
Print approx. €12.22–€14.94 excl. taxPreliminary estimate for one variant
Adapter to be screwed under th original Karoo2 mount. Requires 2 M3x12mm screws to replace the ones from the mount. Printed PETG with 70% infill Note: previous version with 50% infill broke on a very bumpy ride. You may need to use a…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
A compact and satisfying Makarov-style fidget keychain featuring a smooth, functional sliding top. Designed for stress relief, display, or everyday carry, this mini model keeps the iconic look while staying completely safe,…
Perfect for: Collectors Keychain accessories Gifts for friends or firearm enthusiasts The design is carefully detailed to ensure high-quality prints even on basic 3D printers. Printing Settings Recommended layer height: 0.2 mm Supports:…
Can't print a lattice cube? Ring coolers don't help much? Too lazy to print a Bullseye or Hero duct? The Karo cooling fan duct was designed with the following considerations: I want to actually be able to print a 3x3 lattice cube without…
⚫SKARO DALEK⚫ I decided to update this model and redo it from the ground up. I wanted it to be more accurate and colorful and completely without supports. I think it turned out beautifully! More Daleks updates coming every Saturday! And…
⚫ Karosa c734 ⚫ I would like to point out that this is one of the older models that I created a long time ago in Blender. It is possible that if I were modeling this year, I would probably have done some parts differently. I didn't want…
Krytky na výduch zadnej klimatizácie. Smer nasádzania na jednom obrázku - t.j. v prvom kroku sa nasadí šikmá časť a v druhom dotlačí zvyšok. Popri tom treba sledovať aby výduchy zapadli do drážky. V prípade potreby nejaké milimetrové…
It is printed in its entirety, without supports.
THE LEGENDARY RUSSIAN MAKAROV PISTOL Stand for Makarov pistol caliber 9mm for 3 magazines of 8 rounds. The magazine is located in the pistol for 10 rounds (enlarged heel). The model of the stand is higher because of this. Всем понимающим…
I have done my best to replicate the inlay of the armrest of my Skoda Karoq as faithfully as possible. In addition, the diameter of the front cup holder has been increased to 75mm so that thermos cups can also be placed. Two models are…
Adapter mount for bicycle computer head unit Hammerhead Karoo 2. I printed mine in carbon fiber reinforced nylon. For different materials, the spring rate for the locking tap might be different. The Fusion360 file is included if you need…
The need for the super important stuff to be “at hand” resulted in this simple organizer for Skoda Kodiaq (1st gen from 2017-2024) and Skoda Karoq (non tested yet, but shall be the same size). You can put there: - 2 coins for shopping…
Aufteilung: 5 x 1, 3 x 2, 1 x 3 und 3 Karotten. Das entspricht nicht ganz der Kartenaufteilung, kommt dem aber nahe. Hier sind weniger Einsen, was das Spiel auch etwas fixer macht. Quellen: Karotte:…
keine speziellen Anforderungen, das Modell ist sehr einfach aufgebaut ich habe es mit 0,15mm gedruckt.
With this adapter Karoo 2 can be used with wahoo (which is basically garmin turned 90 deg) computer mount. Quarter turn can be loose on some mounts, so use with caution, always additionally secure computer with a strap. For FDM printer…
With this adapter Karoo 2 can be used with wahoo (which is basically garmin turned 90 deg) or garmin mounts. For FDM printer split it into two parts 6.75mm from quarter turn face (prusa slicer has a button for that) and glue back together…
Showcase your Makarov pistol replica in style with this 3D printable Makarov Gun Display Stand . Designed to complement your collection, this stand provides the perfect platform to display your Denix replica or any similar-sized pistol,…
Printed with PETG because of the sun. Print with support. You can place the phone with or without USB charger cable. Max size of phone is 165 x 76 x 10mm Min size of phone is 163 x 73 x 5mm
I got a request for a 9x18mm Makarov ammo box. The spacing is 35pcs/10,25x26,07mm between the insert top and bottom. I am using 1,6mm stainless steel Tig-welding pin for the hinge and latch. I made the latch smaller than necessary but let…
Garmin quarter turn adapter for Hammerhead Karoo 2 or 3. The mount allows the Garmin mount to be offset slightly from the Hammerhead mount to increase the clearance between the bars and the computer. I made this after switching from a…
Decoración de pared Logo Bichota Karol G
⚫ Skaro Dalek 1960s⚫ This is the last model for the year 2024. Expect a new models in 2025 Follow me on YouTube for more info about what you can look forward for. :-) ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ Follow me on YouTube for more info about what you can…
Why? The Skoda Kodiaq has a built in wireless charger, but at least for my iPhone 13 and now 15 it does not work very well, often losing connection with the phone and also making the phone quite hot. Also the car display will give a big…
Karo Cascade Planter with Hidden Drip Tray … is a modern, geometric planter featuring a stepped karo design. Its built-in hidden drip tray ensures proper drainage while maintaining a clean look. Optimized for 3D printing, it prints easily…
Lotti Karotti von Ravensburger Halterung für die Spielfiguren + Kartenkisten
skaliert für lotti karotti. also download und drucken
Model je celý slepený, akorát nápravy a kola jsou sešroubované a vytištěné tak, aby se daly otáčet a autobus byl pojízdný. Použity 4 šroubky M3/20 z přebytku stavebnice MK3S. Šrouby se šroubují samořezně do os bez použití matic.
Gopro Mount for the Karoo Hammerhead 3
The Škoda Karoq is ready for your printer. This detailed 3D model captures the confident character of our compact SUV, from its distinctive hexagonal Škoda grille and crystalline design details to its balanced proportions and robust…
Simple organizer for smaller items in the Škoda Karoq. Tested in the 2025 model. Version 1: Slots: 3x for remote control, keys etc. 1x for credit cards, business cards, etc. 2x USB-A (flash drive, adapter) 2x SD card, adapter 2x coins (5,…
Sammler / Halter für Zeitschriften, Bücher oder Broschüren im Format A4 in verschiedenen Breiten. An den Stirnseiten jeweils ein Loch damit man es mit einem Finger leichter aus dem Regal ziehen kann. ……………… Collectors/holders for…
Sieht euer Lotti-Karotti auch immer so durcheinander aus wenn eure Kinder(oder ihr selbst) damit fertig gespielt haben? Mich hat es so genervt das ich mich ans Onshape gemacht macht habe. Herausgekommen ist eine Box für die Karten und ein…
Print in something strong like PETG CF, ASA, Nylon, Nylon CF etc. Make sure to print it “upside down” so that the slope that has the GoPro tabs are facing downwards, and that the base is facing upwards. Use two M3*8mm screws to attach it…
Custom-designed wheel chock specifically shaped to fit the curve of 18" wheels for Škoda Karoq. Features a hollowed-out internal structure to save material and weight while maintaining high structural strength, along with bottom grooves…
Adapter to mount Hammerhead Karoo 2 to KEdge mount. Uses 2 M3 x 6mm screws. CAD Model here:…
Jackaroo board for 4 players. Print 4 copies of the Jackaroo board. The T-bars lock the pieces together. Print 10mm with one colour then the last 1mm (10.2-11mm) print it using another filament colour. This last 1mm is a band around the…
Isofix-Top Tether Hook for the Škoda Karoq Tested in the 2025 Karoq model Printing material: PETG
The 2-arm base can be screwed with two M3x12 screws (washers optional) to the Karoo 2 baseplate (just remove the original black screws). From the Rockbros RHL 400 light, the original adapter can be removed by loosening two small screws.…
Bring the classic Jackaroo game to life with this custom 3D printed board designed for 6 players. This unique design offers an enhanced gaming experience, perfect for family gatherings, game nights, and friendly competitions. The model is…
A few months ago the clamp of my Hammerhead Karoo2 mount broke. Without being able to find spares to purchase, I measured it and whipped up a replacement. ~I have printed mine in PETG, which gives it a nice springiness and should resist…
Papi es klickt nicht mehr! Wenn Euer Nachwuchst auch gern Lotti Karotti spielt und die Sperrklinken der Ratsche abgebrochen sind so ist hier die Lösung. Gedruckt mit 100% Infill ohne Support aus PETG, dann passt die Flexibilität gerade…
Vakaros Atlas 2 mount for J/70. Includes two versions: one for the bare Atlas 2, and one for use with the Atlas 2 and Atlas Silicone Case. Designed to work with the included mounting bracket and two Velcro straps Additionally, you will…
I used different Mounting arms before. A problem was that they were to deep and my co-driver always changed the position of the phone with his knee. This mount is to be intended to be mounted on the highest position which is possible so…
A bust of Karol Nawrocki. 2025 President of Republic of Poland I've created
Adaptor plate for Bar Fly type Specialized accessory mount (Tarmac, Venge, etc.) to use with Hammerhead Karoo 2. You will need a M4 countersunk 14 mm as the provided 6 mm are too short. Print Settings Printer Brand: Formlabs Printer:…
I've printed one in PETG and it's working fine.
Made in Fusion. The “legs” diameter: 2 mm Height: 3 mm
Tisknout s plnou výplní pro lepší pevnost Print with full padding for better strength
About two years ago I was given a Makita cordless drill as a gift. I searched everywhere for a possible mount designed for IKEA Skadis, but couldn't find a good one. In the end, I decided to use a simple emergency solution and adapted a…
Zwischenstücke für die Auflage der Karosserie. Spacers for supporting the bodywork. Tamiya TT
Uses M3x16 machine screws to replace the existing screws and M5 bolt and nut for the GoPro side of the mount.
Remix based on Škoda Karoq Cup Holder insert by Cooly Creations Modified to better fit coffee mug with handle.
Reorganised for more storespace (my use case). Zigarettes up to XL Package should fit inside or also a kindle with with a “normal” case, but here the smartphone mount may limit. Added a “ball” smartphone mount. See the picture. Other…
added a base to the remixed model. same diameter as the original figures
klíčenka se siluetou ŠKODY KAROQ tištěno z PET-G 0,12mm 3 vrstvy, 15 % infill velikost upravena na 80mm podle klíče k autu.
Karol G - Icono de la Música Latina Este modelo 3D representa a Karol G , una de las artistas más influyentes de la música urbana latina. La figura captura su estilo característico con su inconfundible cabello rojo vibrante, gafas de sol…
Karosseriehalterung hinten Tamiya F103 / Rear body mount Tamiya F103 gedruckt mit PETG / printed with PETG
The Adventures of Buckaroo Banzai Across the 8th Dimension was a film way ahead of its time. One of my favorites and I hope to bring more people into the fold. I have not printed this yet, but I plan on printing it this weekend. Enjoy,…
Adapter for using the Hammerhead Karoo 2 mounting clip on a KW Mobile bike GPS mount for Garmin: https://www.amazon.de/gp/product/B0759V5YHC since the original mount is not compatible with 35 mm handlebars. I highly recommend printing and…
So that I can store my Makarov reasonably I have built a vertical stand. It should fit any Makarov. Please note, always keep the pistol out of the reach of children. There are 3 versions included, one with horizontal text, one with…
I made this one to fit 2 coffee thermos mugs from Klean Kanteen for the center console of the Skoda Karoq, it fits, maybe not perfectly but it works for my needs. Printed it in Prusament PETG. with 35% infill, the wall between the mugs…
Pape Jean-Paul II (Karol Józef Wojtyła) – Buste Ce buste représente le Pape Jean-Paul II, né Karol Józef Wojtyła, dans une interprétation sculpturale inspirée de l’une des photographies les plus emblématiques et populaires du pape.…
Center console inlay for Skoda Karoq
In the Lotti Karotti board game a single central pin holds the rotating board plate. When the kids jump their play pieces onto the board, a little hook on the central pin holds all the weights and forces of these pieces. Eventually this…
Nutno tisknout s podporou. Lze použít i TPU. Tisknu z PETG výrazných barev.
The model prints without any support, the layer height should be set to ruffly 0.15mm. We highly recommed to use a material, which withstands high temperatures, such as ASA or ABS. On the bottom is some space for cables.
I've previously uploaded a number of ebike designs (alas, before the current challenge), but I decided to upload this one because I think it is a good fit. Hammerhead Karoo is a really great GPS and it includes a ‘garmin’ mount adapter.…
Llavero Spotify canción Tusa Karol G
Držák na mince do auta Škoda Karoq. Držák se umístí do díry ve středovém panelu vedle nápojového otvoru. Tisk 15% výplně
MADE IN TPU. Other filaments not tested. This is a pair of magazine pouches, one single and the other double, to hold CZ 82, CZ83 and Makarov IJ-70 double stack magazines.
Additional storage box for the Škoda Karoq center console. 2 versions available Tested on the 2025 Škoda Karoq Recommended material: PETG To prevent slipping, I recommend sticking a thin strip of silicone anti-slip tape on the underside…
Nové uložení karoserie pro lepší citlivost nárazu, lepší demontáž kastle a lepší pohyblivost v uložení.
CZ: Tato sada obsahuje repliky kontrolek z nákladních vozů Tatra, traktorů Zetor a autobusů Karosa. Modely jsou primárně navrženy pro použití se SimHub / KOMSI, ale lze je využít i pro jiné projekty. Kontrolky jsou připravené pro tisk…
I made a remix of this GoPro to quadlock mount and added a Karoo connector to it. I have printed it in PETG and it works awesome, but i tried to use as little support as possible, so the underside looks a bit crap… but it works, i dont…
Center console inlay for Skoda Karoq
These hooks allow you to hang your towels with just one hand. Their modern look allows them to blend in with the rest of your furniture. A total of 10 variations are available. You can choose from 1 to 5 "hangers" and whether or not you…
Jackaroo board for 4 players. This is a super light version of the original one I made (Looks weird, but saves your more than 50% filament. Most importantly it does the job) Print 4 copies of the Jackaroo board. Slot/bar locking mechanism…
Car model as pendant or toy, print without supports. Separate wheels for better printing.
YOYODYNE PROPULSION SYSTEMS, THE FUTURE BEGINS TOMORROW. Print Settings Printer: Fusion3D Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: Signs & Logos
Rc karoserie na podvozky Wpl, k stavbě není plánek ale lze to s trochou představivosti zkompletovat.
Simple and subtle center cap design for the Škoda KAROQ. Features a modern look inspired by original parts. Diameter 56 mm. Print material: PETG For the final finish, I used black spray paint. Jednoduchý a decentní design středové krytky…
9X18 Makarov stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Jackaroo board for 4 players. This is a lighter version of the original one I made but looks more elegant than the super light version. Print 4 copies of the Jackaroo board. Slot/bar locking mechanism used to lock the 4 peices together.…
Mount for the Vakaros Atals 2 you need 2 M4 Heat inserts like these: https://cnckitchen.store/de/products/gewindeeinsatz-threaded-insert-m4-standard-50-stk-pcs also you need some duple sided tape for mounting it to the RS100 Print…
Spreizdübel Omega B Stoßstange Untere Befestigung Drucken mit TPU der Dübel Sitzt sehr fest beim reindrücken ist schon edwas druck notwendig Passt aber sehr Gut.
It is just the spacer for the HMS Insert to adapt it to the Canyon Cockpit Mount ( LINK ). Additionally you need HMS Inserts ( LINK ) and M3x20 screws, washers and nuts. You could also order a GoPro Mount with a thread, so you'll only…
Decided I wanted to 3d print some Christmas tree ornaments this year. We decided to go with a scifi themed tree and this was my first ornament design. I have always been a fan of Buckaroo Banzai. Needs sanding and painting, but I happy…
Das Karolus-Monogramm (auch Karlsmonogramm ) war das offizielle Signum Karls des Großen. In Aachen gibt viele Bronzeplatten mit dem Monogramm, die als Wegweiser für einen historischen Weg durch die Altstadt dienen.
Una espectacular escultura 3D de la famosa cantante colombiana Karol G, luciendo un atuendo inspirado en el inconfundible estilo de la marca Versace. Este modelo ha sido diseñado y esculpido digitalmente capturando detalles excepcionales…
Puzzle of Rusian Admiral Makarov variation: http://ipuzzles.ru/burrs/transformation-puzzle-of-admiral-makarov/ Category: Puzzles
Questo basso rilievo celebra l'evoluzione di Goku, uno dei personaggi più iconici dell'universo di Dragon Ball. La scena raffigura Goku sia nella sua forma adulta che in quella giovane, catturando un momento nostalgico che celebra il suo…
![Doctor Who - Post Time War Dalek [2012] ★SKARO DALEK★](https://media.printables.com/media/prints/75799/images/7871489_a41a8051-5d2e-4fd8-99e1-5c8b16749666_987f6701-daaf-43a1-8701-4326e696a9f1/gg1.png)
![Doctor Who - SKARO DALEK [1960] by-MrHan/24](https://media.printables.com/media/prints/1037308/images/7871476_6d896f49-631f-4067-9ed8-b586fbb3b4c0_627546ca-fea3-4aa7-856b-eb81ec1bbc75/gg-6.png)
![Skoda Kodiaq / [Some Karoq models] MagSafe Charger](https://media.printables.com/media/prints/802548/images/6212784_eb6141e5-07cb-445d-a3a6-48943e35edb6_97805377-426c-4176-a8e1-c0fc7762090e/img_4495.jpeg)
