Counting matching models…
🇮🇸 Velkomin til Íslands! Welcome to Iceland! Hallgrímskirkja is a Lutheran church situated in the center of Reykjavík, Iceland . It is one of the best-known landmarks and is visible throughout the city. State Architect Guðjón Samúelsson's…
As there is no commercially available holster for the KJW KP-08 i just designed this one off of an 1911 holster. The holes for the pin in the release and the main body may still need a small drill, for whatever pin-size you're using. For…
3D model I sculpted of Kjalnar Tombskald from Elder Scrolls Online, commission ordered by zbzszzzt123 on Reddit. The head doesn't have any detail, as the original commissioner already had one they were using.
My kids are huge fans of BattleBots and inspired me to create a set of toys that they can be a bit rough with without fear of breaking the more expensive Hexbug toys and also using only 3D Printed parts. This Lockjaw toy is one of my…
!!ONLY FOR AIRSOFT!!
This rack was designed to hold 125 standard clay/plastic poker chips (39mm diameter). 5 stacks of 25 chips. The racks can be stacked on top of one another. Finger holes have also been added for easy removal of an entire stack of chips.…
Just as Andrew Roth's initial Dual Spool Cord Wrap design was spool-specific (Prusament), this remix was made to fit the empty spools of my daily-driver filament (KVP/MakeShaper). This remix will also work well with empty spools from…
===== CZ ===== Jedná se o kompletní krabičku pro převodník HCKJ-8200. Upozorňuji že deska HCKJ-8200 má trochu jinak rozmístěny součástky než GBS-8200! Proto i design je jiný, viz foto. Pokud stahujete mé modely, přispějte mi na vývoj pár…
This rack was designed to hold 50 standard clay/plastic poker chips (39mm diameter). 2 stacks of 25 chips. The racks can be stacked on top of one another. Finger holes have also been added for easy removal of an entire stack of chips.…
Dit model heb ik met behulp van AI gemaakt om tijdens de Sinterklaastijd de pepernoten (of eigenlijk kruidnoten) op tafel te zetten. Als je het bakje wilt schilderen, kan je dat doen met acrylverf. In het bakje kan ongeveer 200 gram aan…
Just a fun thing for the gun. With rail for attachments. Print Settings Resolution: 0,16 Infill: 10 Category: Other
this baseplate is modeled to look like a Pmag GL9 base plate. this is not 100% the same but it give it the look and feel of one. so you can turn your WE TECH G series mags the G19,G17 and so on. into a “Pmag GL9” just like with the…
Airsoft GBB pistol magazine loader for KJW/WE G-series. Slightly narrower than a Hi-Capa, and the hole is lowered by 3mm to line up with the smaller cutout section of the G-series mags. I had to modify the follower on the magazine to give…
Ripped straight from the fallout 4 game files. 47k triangles 143k vertices
This is KwikJet X V2, the successor of the beloved KwikJet X! Requirements: 3D printer: – Minimum 3D printer build volume: 210 x 210 x 200mm Any standard slicing software (Cura, Simplify3D, Slic3r etc) please visit our website…
Reverse engineered from kjw m9. Missing safety assembly. Not meant to be printed as it is.
Om dat de ander plantenclips afzakken over het stokje heb ik er rondje aan toegevoegd. Because the other plant clips slide down over the stick, I added a circle. groeten ludo
I designed a holder for a Papermate Inkjoy pen as they are my partner's preferred pen and we use them to write things on the calendar on our fridge. I dislike rummaging through the utensil drawer next to the fridge to find the pen, so I…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
KJW M700 Barrel to M14 CCW Thread Adapter Fits (snugly) over the unthreaded KJ Works M700 Rifle and adds M14 CCW threads for threading on muzzle devices (E.g airsoft tracer). I made the sleeve that fits over the barrel long so it covers…
CFMOTO 450MT Seat rubber cushion part number: 1) 6KJ0-130204 2) 6KM0-130205
Hose hanger for both Quickjack hydraulic lines and brackets that clip on to hydraulic pump handle to store AC and Controller cables.
We had a basket 18 years old that almost fell appart so i designed a new one. Specificly to organize the little packages that you always buy in bulk but not use often.
(08-09-2024) APS ACP base plate added GHK g 1 7 base plate added -- this baseplate is modeled to look like a DMB base plate. so you can turn your WE TECH G series mags the G19,G17 and so on. into a “Danny meatball G mag” just like with…
Totale afmetingen: (B)375 x (D)460 x (H)860 mm Inwendige afmetingen van de bovenste 4 laden: (B)255 x (D)390 x (H)55 mm Total size cabinet (w) 375 x (d) 460 x (h) 860 Inner size top 4 drawers (w) 255 x (d) 390 x (h) 55
***UPDATE*** Modified geometry to make it print easier. Use TPU for best performance. Empty Chamber Flag (EC-Flag) Features: Designed to not rest against the nozzle, as to not induce stress and potential damages. Pushes BB's out of HU…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Replacement blocks for the kickstand on the Urban Arrow cargo bike. Print them with plenty of wall loops at the bottom to make them last longer before wearing out. And use support. ------ Blokjes te vervanging van de standaard blokjes op…
Met mijn zoektocht naar printbare schaalmodellen op 1/87ste kwam ik deze bushalte tegen. In my search for printable 1/87th scale models I came across this bus stop. regards Ludo
My 25 Chip holder - https://www.printables.com/model/1422966-chip-holder Chip Tower holder for 15 chips - https://www.printables.com/model/1423032-chip-tower-holder Recommend printing as many chips, as many are in the gcodes, but it's on…
This is a remix of the single pen version which can be found here . I designed a holder for a pair of Papermate Inkjoy pens as they are my partner's preferred pen and we use them to write things on the calendar on our fridge. I dislike…
Lidl has an action where you can save for storage containers. Your drawer will become a mess with all the lids. The containers itself can be stacked the lids not. Here is a simple solution
The full guide to this build can be found here: https://www.instructables.com/Free-Pen-Plotter-From-Inkjet-Printers/ Or you can watch the video here:
This is a wall-mounted shelf/bracket to hold the power unit of a QuickJack vehicle lift system against the wall and out of the way. Wall mounting is accomplished with 2x 8mm or 5/16" lag bolts, 50mm on center. I got lucky and had a spot…
2d bookmark of Kim Dokja from Omniscient Reader's Viewpoint. Image taken from chapter 161 of the webtoon. This model prints well on, and was designed for, printers that can only print one color at a time. This is because it is so thin…
just an outer barrel "cover" Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: No Category: 3D Printing
This is a very good buck converter for LED or other projects, capable of delivering 150W of power. You can find the link for the step-down converter here: https://s.click.aliexpress.com/e/_oCTKc3B
this is a rail for the kjworks ruger Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Category: 3D Printing
Hose Clamp for storage of the Quickjack 8000TL the jack cross section is 40mm wide and 50mm tall. Printed with TPU so its flexible and tough. Slots are for securing the holder to the frame with Zip Ties.
Let me know if there is any issues you can find me @ https://discord.com/invite/jNqCQEhSYT This is the RC Version - I'm actively looking for testers and feedback, feel free to message me. <<<Non-Stock side panels use this version >>>…
These are remixes from https://www.thingiverse.com/thing:4883607 By Esteran I really like The carbine stock from Esteran but I want something more classic WW era looking and maybe more variations to the designs will be great. There are…
Should friction fit, but better with a M2 threaded insert and a M2x8 grub screw. Should be printed upright, with supports on build plate only for the hole
Coasters inspired by the card game Ddakji from the series Squid Game. Maybe you will even be able to turn them around ;-).
I wanted a 2" freestyle basher but couldn't find one so I made my own. Category: R/C Vehicles
A handle holder for the Harbor Freight Pittsburgh 1.5T aluminum jack. Keep your handles from rolling around your trunk on your way to the track or nice and tidy for storage. Has a built-in lever spacer to securely mount the handles to the…
I recently played through Dishonored, since Dishonored 2 is coming up. So I made a model of Slackjaw and his gangs swords. The model doesn't contain the leather work so i highly recommend doing that if you decide to print this. Category:…
I was looking for a case that was inspired by hak5 sharkjack and could not find anything. After no responses from hak5 after a few attempts to request official permission, I figured I would post this here, though if they ask I will remove…
Let me know if there is any issues you can find me @ https://discord.com/invite/jNqCQEhSYT This also Works on Sv08 with non-Stock side Panels! This is the RC Version Blackjack is a powerful and compact filtration solution designed to keep…
Sinterklaas Voor de feestdagen heb ik deze schattige Sinterklaas ontworpen om volledig 3D-printbaar te zijn. Het model bestaat uit eenvoudige vormen, stevige details en is ideaal om te printen in meerdere kleuren. Perfect voor printers…
gridfinity bin 2x3 for Kjell & co mini screw driver and bits. Screw driver compartment is not a perfect fit but works well.
Denne model sikrer at en 1½ størrelse LK Fuga kontakt altid er tændt. Den fungerer på den måde, at man fjerner kontaktdækslet med f.eks. en skruetrækker (eller bestikkniv) - bare træk til, da dækslet er trykket fast. Herefter monteres det…
This is one of the things that always gets lost in the pistol, so i designed this since it's hard to get spare parts. Print Settings Rafts: No Supports: No Resolution: 0,12 Infill: 100 Category: Other
BJ-14 Blackjack for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • bj-14.stl The…
Required Hardware: 2250 box 6 x M3 x 30 mm screws (room for a 7th spare screw in the TPU insert) 5 mm EVA Foam for lid Calibrator box 6 x M3 x 30 mm screws Materials/print settings: PETG - 6 walls, 3 layers base, 3 layers top, 15% gyroid…
I needed the cable chain to stop the hotbed cable rubbing, but the chassis bracket was too big to allow the large bed levelling knobs to pass. I remixed just the chassis bracket so that I can still use the big wheels, which was a must,…
I made this to mount an actual watertight receiver box in the boat since Proboat couldn't be bothered. This keeps the receiver from going haywire if/when it gets wet. Mounts using the factory screws to the boat, and then the Traxxas 3628…
Diese Schwimmerkammerdichtung ist passend für BVF NKJ 12, 13 und 15mm Vergaser mit Zentralschwimmerkammer. Passend für Simson SR1, SR2, SR4-1, KR51 Baujahr 1964, SR4-2 die ersten Baujahre, Tümmler Bootsmotoren mit NKJ Vergaser und…
Needed to connect two pieces of drainpipe together. More specifically to connect a pipe with an external dimension of 75mm to a pipe with an internal dimension of 65mm. Ended up designing a 2mm thick connector with external dimensions of…
So I have only a few rolls of filament and wanted more colours. Searched and found a few thingis and even printed one of the designs. All used marker pens to colourise the filament. Tried this and on my first attempt, while it did colour…
This is a diviner who has been horribly injured in the past but was then blessed with the gift of foresight. The final picture is a Blender render. Print with supports. I printed this at 0.12mm layer height. If the scaling is weird just…
Added a single layer and increased magnet count to 4.
Piet Voor de feestdagen heb ik deze schattige Sinterklaas ontworpen om volledig 3D-printbaar te zijn. Het model bestaat uit eenvoudige vormen, stevige details en is ideaal om te printen in meerdere kleuren. Perfect voor printers zoals de…
BJ-A Blackjack Arrow for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…
Coat of arms of the former county of Ringkjøbing Amt.
This is the Required Adapter and Lid for the Exhaust Adapter and lid for The BlackJack SV08 Filter
Fan Adapter and mount For the Blackjack required!
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
I was experimenting with piezo inkjets. The first attempt was a no go (frame was not watertight). Please leave a comment if you have got something working using 3D printed parts. I know about these attempts that seemed to work:…
HP Deskjet Ink Advantage 3776 Paper Holder, made it on tinkercad to resolve my problem.
Bij de kroningsfeesten in Tongeren droegen veel mensen deze speld om hun kledij op te binden. ook deden ze het rond hun sjaal. Ik dacht dat kan ik ook wel printen. Je kan ook andere vormen en kleuren naar gelang de sjaal toepassen. At the…
Remix to fit these pens.
Specialty bracket used to install a light sensor on a conveyor belt. This is used to detect vials on the conveyor and trigger the vial printing.
Spring retainer for M9 Beretta magazine
You want to teach yourself a new skill, but as a beginner, it is sometimes difficult to pay attention to many things at once. Especially if you are not sure if you are doing things right. To eliminate at least one variable, here is the…
hi this is a pentray for pens Category: 3D Printing
I wanted to be able to use the ZeroClick with my Voron 0.2 but also wanted a filament sensor in the toolhead for eventual integration with a MMU setup like the ERCF. The offset version of the mount is featured in the photos, because I…
Wall hanging solution for your QuickJack lifts. These are made to be used with 5cm wide velcro straps found below. Each secured to the wall using two 10 x 2-1/2" pan head screws and two 25.5mm washers. These are not load bearing as the…
Ein Austecher in der Form eines Seelenborhers. Man muss vorsichtig sein, dass der Ausgestochene Keks nicht zerbricht
I remixed these cards: https://makerworld.com/nl/models/727561-classic-playing-cards-full-deck-54-with-options#profileId-961439 I used this trophy base: https://www.thingiverse.com/thing:1859599
Upper exterior Set for KJW MK.1 pistol. No need tune, No need fitting, No need knowledge. Just ASSEMBLE. 14-ribs upper picatiny for sight. 5-ribs lower picatiny for laser and light. Holosun K series foot print. Optic fiber Iron sight .…
3D-printable Korando KJ tablet mount with secure housing, storage tray and cable access.
Support for the ALPSALPINE RKJXU joystick. It features two holes for mounting the joystick with two M2 screws. I suggest printing with a resin printer, due to the small size and little dents and holes. I attach the full 3D model so you…
With it's 275 mm length it should fit diagonally on a standard 220x220 mm print bed. I recommend printing it like on the photo with tree suports enabled. I used ABS and 0.2 mm layers for mine but other materials like PLA and PET-G should…
The 3D printable files for the Slimme Slokjes capsule from Nerdland Festival! Now also in half size for faster print!
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
organizer for kathode from plasma cutter
Cricut adapter for papermate RT300 Inkjoy pens. Remove rubber grip to insert oen in adapter
Bevel gear for KJ-8310C automatic mahjong table. Made for a friends table whose gears broke. Printed in PETG with 0.4 mm nozzle and 0.2 mm layer height. Tap the larger hole with a M4 tap.
This drops your pistol to a CQB friendly FPS. Print Settings Resolution: 0,2 Infill: 100 Category: Other
This is a little tool to allow a 6 conductor RJ45 coupler to be clamped to the fascia of a module or model train layout for a temporary throttle panel for DCC. Add a duplex adapter to the backside, and you can daisy-chain your way along.…
I like ErikJDurwoodII's Mr. Maker, but I hate printing parts one-by-one. Yay printing plates! Also, I had trouble getting OpenSCAD to render "Bot_Spool1.stl" so I fixed it up a bit and re-saved it. Print instructions Unassociated tags: mr…
First model. No support or iterations (by me). If anyone else has broken the top electrical box cover by dropping the pump…here you go.
Behold - my first model made for CMF Phone 1, a rear mounted frame for DAC (or USB-C and 3.5mm jack connector). Simple and needed upgrade that can provide an upgrade to have a fully functional 3.5mm jack to connect your wired headphones.…
An even smaller/compact version of the KdG Slimme Slokjes Capusiles. 3x smaller and faster print time! Same effect!
