Kobalt Mini ToolBox Top Bin Divided
Printed with PLA on a Sovol Sv06 plus
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
- Downloads
- 149
- Likes
- 39
- Rating
- 5
Counting matching models…
Printed with PLA on a Sovol Sv06 plus
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
This model has 0,4mm tolerance. If you need less or more tollerance let me know in comment, i have project with parametric design so can add any tollerance. On pictures you see 70% rescalled print (black cube). For best results I suggest…
The Lowe's Mini Toolbox is perfect for adding a 3x5 Gridfinity baseplate in each drawer to use x3 and x6 height bins. I've modified one of my Clickfinity baseplates to incorporate spacers on each side; none are needed for the front and…
I designed a combination wrench holder after struggling to find one I liked. This is based on a generic wrench holder that gradually increased in wrench size and depth. I used a 3x5 Gridfinity base for the 13 wrench holder and a 3x4 for…
I liked https://www.printables.com/model/534188-kobalt-mini-toolbox-inserts/ but the base for it used Clickfinity and I thought Gridfinity itself was fine. Threw together this base-plate from…
Yet another Kobayashi Fidget Cube. 09/12 - Update for less support. I refined the model to print with a 0.6 nozzle, the spacing between the parts was adjusted accordingly. Of course with a 0.4 nozzle the part can be printed. Printed with…
Another version of the famous Koabyashi fidget cube, credits to pkobayashi . This design have some bigger hinges, being easier to print and withstanding more fidgeting. May need some movement until it gets loose.
Latch broke, I made a new one. The end If you would like to buy one you can do so here https://www.etsy.com/listing/1344813271/kobalt-toolbox-latch-thing Print instructions Category: Tool Holders & Boxes
Tool mount and dust shoe for the Kobalt palm router and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the old ones though. Best to print both…
This is the first iteration of a Kobalt 24v battery wall mount; it can be mounted anywhere, because it has the locking cutout made in it as it does on the tools themselves. There are also some easy-out mounts (ones that do not have the…
Designed all my models in Fusion 360. used parametric design so I can make them work with any socket or wrench
A battery release button for my Kobalt 40v Leaf Blower broke, and there are none online that I can find, nor does Kobalt (Lowes) sell replacements. I have created this in Blender, printed it in PLA and have since used it successfully.
UPDATE - I added a second version with the hinges not going all the way through the cubes since this looks a bit nicer, it does print a bit more difficult so I would suggest first print the older version and then the updated version, the…
Gridfinity holder and organizer for Kobalt 3/8" drive metric sockets. Slots for 19-9mm, both regular and deep sockets as well as extension. Organizer fits in a 3x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the…
Wall mount for two 24V Kobalt batteries. Requires 2 screws to attach to wall.
A lid holder that utilizes magnets for the Kobalt Mini Toolbox Magnets used are 2, 3mm x 8mm cylinder magnets I had on hand that are inserted into the print
Any Cubic Kobra 3 X-Axis PTFE 9 Tube gimbal. This is an new design that was requested by a user for a gimbal mount that can handle 8 PTFE tube from 2 Ace Pro units. This gimbal mounts allows freedom of movement in all axis relieving the…
I couldn't find a ¼" socket set holder that I liked. All of them had a 6.5mm, which I don't own, have never needed, and have never seen in stores. This is designed to hold my Kobalt ¼" metric set in my Gridfinity organizer. Numbers are…
Based off R Ballard Design's inserts but I wanted to be able to store some pens or brushes in the bottom drawer. Made the walls slightly taller and rounded the bottom corners to make it easier to get in and out. Including a pic of the…
Adapter to allow you to use a Kobalt(Lowes) 24V battery with your Dyson V8 Stick Vacuum. Will probably work with other versions of Dyson vacuums. Allows you to use longer lasting batteries and quickly swap to a freshly charged battery…
O-ring failed on my portable 24v inflator and i found the problem to be a bad seal on the pump. Its a tight fit but work. Use as many perimeters as you can and .16 layer height.
I designed this 3/8 metric socket holder for my Kobalt socket set. The holes are made to fit with about 1mm extra space. Note: the Kobalt 3/8 short sockets are not the same external dimension as the deep sockets. This model is for the…
This is a little something I whipped up to hang my 24v Kobalt tools from the underside of a bench, or in my case some cabinets. Print Settings Rafts: No Supports: No Resolution: .2 Infill: 25% Notes: Designed to print standing upright…
Designed all my models in Fusion 360. used parametric design so I can make them work with any socket or wrench
I have about four of these on my benches. Convenient, but I wanted to maximize space. I did not see that anyone ever made some of these for the Kobalt boxes, so I modeled up my own in Fusion. So far they work great. The extra bump inside…
This is for the Kobalt (Lowes hardware) 12 inch dual bevel sliding compound miter saw item# 0358936 / model# SM3055LW. I bought my saw probably 8 years ago now but I'm pretty sure they still sell a derivative of this saw at the stores. A…
General purpose Kobalt power tool battery adapter. I use copper pipe hangers to make the terminal plates. I use screw inserts and 6-32 screws as the screw terminals. The batteries are well priced at Lowes. I regularly see the Li-ion 1.5Ah…
After playing with Kobayashi cube on one party I had to model one. You have to assemble this one and it needs supports on build plate only which are easily removable. Connector1 and Connector2 shaft and hole are same dimension. I have…
A two-piece print I designed to organize a 3D printer toolkit in the top of the Kobalt Mini Toolbox. I printed at low settings .4 layer height, 180mms and it took a little over an hour for the largest part. The second took about 20…
Logos for Kreg, Kobalt, Fisch and Weller If you're looking for a particular logo, let me know and I'll try and get it for you.
日本でのスターウォーズ セレブレーション 2025 を祝うために、日本の古い小判の形をしたインペリアル クレジットを作りました。
Router mount for the Kobalt Corded router to mount to the MPCNC Primo Version. Item #5207238 Kobalt Lowe's https://www.lowes.com/pd/Kobalt/5014100299 Model #K7TR-03
Router mount for the Kobalt Corded router to mount to the LowRider3 CNC, includes dust shoe. Item #5207238 Kobalt Lowe's https://www.lowes.com/pd/Kobalt/5014100299 Model #K7TR-03 Aza came up with a great idea to use clear filament to let…
I'm working on a short nozzle for the Kobalt 24V blower (Model #KHB 4224A-03) to use while drying cars. I needed something quickly, so I just designed an attachment that attaches to the tip with an interference fit. The current iteration…
Gridfinity holder and organizer for Kobalt 3/8" drive SAE sockets. Slots for 7/8"-5/16", both regular and deep sockets. Organizer fits in a 2x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the organizer and only…
Gridfinity holder for Kobalt 3/8" drive ratchet. Organizer fits in a 1x5 gridfinity footprint and is 3U tall. Lettering is embossed 1mm onto the organizer and only uses around 0.14 grams of filament if you want to print it in a second…
This is a blank plate for a kobalt table saw. There is a pre made cutout for the riving knife. Need to insert 4 - 5mm threaded inserts into the 4 holes along with 4 grub screws to level the plate. I used PETG on a 400 x 400 bedslinger.…
Printed with elegoo PLA Pro on my Sovol SV06 plus. 3hr. 12min for my settings in Cura Slicer. UPDATED 12/13/2024: Added correct files
Wall mount for Kobalt 40V Max 520 CFM Gen4 Leaf Blower
This is a small holder made for Kobalt Batteries. It complements my design for a tool holder for 24v Kobalt tools. It will mount your tools and batteries under a cabinet or bench. This is optimized to print without supports. Simply print…
This is a remix of AaronOaks ¼" socket organizer. There were a few sockets that I didn't come with my Kobalt tool set so I removed them. Numbers were rotated for ease of reading. Measure your sockets for fitment before printing. Sizes of…
Gridfinity storage for your Kobalt Folding Utility Knife. https://www.amazon.com/Kobalt-Utility-Blades-Foldable-Release/
Couldn't find a model so I made one real quick, using it to convert a powerwheels truck from 24v to 40v, used spade connectors glued into mate up to the positive and negative ports, added holes for ¼'x20 bolts to mount it, it's a snug fit…
This adapter is sized for my particular Miter Saw (a Kobalt from 2015-ish) to the hose on my Shop Vac (a Ridgid hose from this kit). The outer diameter of the Miter Saw end is 55.5mm; the outer diameter of the Dust Hose end is 53.5mm.…
This is a wall mount for the US General or Kobalt Mini Toolboxes. I created this because someone suggested something with a dowel under the mounts to hang something (or hand towels). This uses a 1/2 inch dowel, 12 inches long. 280mm seems…
These are inserts for the Harbor Freight or Kobalt mini toolboxes. The "Top Insert" fits the tools that I use most while printing. The "Top Drawer Insert" fits pretty much everything that came with my Centauri Carbon Accessories Pack.…
I dropped my leaf blower and the latch that holds in the battery broke. I submit my replacement, the kobold. What else would you expect from route 3D6? print 100%infill with supports on bed and sand the pins, I had to shoot some wd40 onto…
Print this bottom to allow integration of a kobalt 24V battery to the 18V ryobi tool. Use the top part from the linked model for the RYOBI half. For terminals on the kobalt half Use spade terminals or appropriate ring terminals and…
Wall mountable holder for Kobalt 40V batteries. Designed to store my many Kobalt batteries up and out of the way by attaching them directly to some 2x4s along my garage walls.
Same model - set up to 5 colors mmu print make sure your setup is up to the task - this calls for both accuracy of the printer and mmu for 100% print this is a 400 filament swaps print. Print Settings Printer Brand: Prusa Printer: Mk2.5s…
Hello, this is the first model I am posting let me know what you think!!! Please feel free to show me what you use these models for Top part 1-2 fit into the flip open top of the box they should fir either way. The 227-mm and 228.5-mm…
Designed all my models in Fusion 360. used parametric design so I can make them work with any socket or wrench
This is a connecting ring to allow the US General and Kobalt mini toolboxes to be stacked. The lid can be opened, add the connector, stack another toolbox on top. UPDATE: I added a version 2.0 for those that want to modify their toolboxes…
Printed at 0.28mm layer height for speed!
These durable and stackable Kobalt storage crates are readily available from Lowes hardware store or other online sellers such as Amazon. I purchased mine for $17ea. Please note: This model is provided primarily for rough dimensional…
I got tired of losing my screw bit for my Kobalt drill/screwgun. I designed a bit holder that attaches where the belt clip mounts to. It holds two 1/4" screw bits. You will need an M4x10mm Hex Button Head Cap Screw. It should be a button…
I designed this 3/8 metric socket holder for my Kobalt socket set. The holes are made to fit with about 1mm extra space. Note: the Kobalt 3/8 deep sockets are not the same external dimension as the shallow sockets. This model is for the…
Organizer for Kobalt midget wrench set. Print instructions Organizer for Kobalt midget wrench set.
Wanted to better organize the small parts I keep in my Kobalt Mini Toolbox. Made this small tray insert that prints on one plate. Has a few different size bins built into the overall tray design.
Dado stack insert plate for an 8" dado stack on a kobalt TS10601 jobsite table saw. I believe the TS10602 is the same. You must modify the riving knife in order to use this plate and a dado stack on this particular saw by disassembling…
I love the Kobayashi Fidget Cube as a clever, 3D-printable fidget. The most amazing thing about it is that no assembly is required. Through the magic of 3D printing, all the joints are printed "in place". I've printed many of these…
Battery holder for Kobalt 80V lawn equipment batteries. Heavily influenced by Joe-OSU- 's Kobalt 40V Battery Holder Wall Bracket . I've remodeled this mount from scratch, and have included a 2-hole version for vertical mounting and a…
HSW holder designed to fit the Kobalt deburring tool and possibly others. Hooks are roughly 11.5mm in distance. No specific parameters but printed mine in PLA at 120/mms Thanks for checking it out and happy printing!
I designed this 3/8 Imperial socket holder for my Kobalt socket set (both shallow and deep). The holes are made to fit with about 1mm extra space. I wanted to build this on a 4x2 so I had more options in my tool drawer. I used the…
This is a bracket that can be used to design your own accessories for the CaseStack or use it to add some color to unused mounting points.
This a holder for you Kobalt electric screwdriver and bits, I have included two options a 1x5x5 unit and a 2x5x5 unit. The smaller of the two is what I have made and have pictures showing, as the mini toolbox doesn't have a lot of room,…
Insert for DeWalt/Craftsman ToughCase+ Kobalt 1/4" 19 Piece socket and ratchet set - https://www.lowes.com/pd/Kobalt-Universal-19-Piece-Standard-SAE-and-Metric-Matte-Mechanics-Tool-Set/999957955 These will not work for DeWalt's old bit…
I remixed this to remove some material, shorten print time and make it look a little nicer with chamfered edges.
This is a flat nozzle for lifting wet debris. It comes in 15 and 20 degree angle versions. As this blower is quite powerful there is a significant torque applied by the 20 degree nozzle. The area of the nozzle is 90% of the normal…
This is a model I made to wall mount my 40v Kobalt batteries. I printed it vertically with 20% infill and no supports.
The original is meant for a smaller level but I wanted a larger one for holding my Kobalt level
This is a platform created for the US General and Kobalt Mini Toolboxes. This raises the box up enough so that you can open the bottom draw without hitting things on the table. There are two models and two versions. There is a model with…
Gridfinity holder for Kobalt Retractable Utility Knife
Really like the design (reviewed the timeline in Fusion 360, a lot of love went into the design) but I remove magnets and screws from most things I print. Figured if I wanted a variant without, others may as well. Given that the bin was…
Built this in Fusion 360. Created slot in the bottom to add a magnet (10mm*100mm) .
el modelo se mejoro para que sea apto ara impresión 3d uno de los dos modelos que hay tiene una base unida a la figura, ya que no supe como hacerla de manera desmontable de la figura en blender, pero mas adelante si este modelo alcance…
Simple support free mount for a Kobalt 24v battery. Remixed to allow the battery to lock into place. Category: Tool Holders & Boxes
I was unable to find a base plate that would work with my Kobalt 24V Trim Router, so I decided to model the one that came with it. I plan to design additional attachments following the bolt pattern for this router. The eventual goal is to…
I had a set of these Hex wrenches that needed a home on my pegboard so I designed this. I printed it with no top or bottom layers and a honeycomb infill. Fits 1 inch spaced pegboard. Shorter of the two shelves is for the SAE wrenches.
I have some Kobalt 40V cordless yard tools. Cordless tools need battery chargers. Kobalt's 40V battery charger works fine, but it doesn't have any keyholes for wall mounting. I came up with this. You will need to remove the four little…
AMS holder for the side of your rack. Also a great filament holder. Tested on a Lowe's Kobalt Heavy Duty Rack. Uses 1" PVC approx. 38" long, 2 pieces. Recommend measuring and cutting to size to fit your rack.
This is a side mounted cupholder for your CaseStack boxes. It will fit most standard sized bottles and cans and some of the slightly larger ones. Pictured print was made in Creality Blue PETG
I needed a way to manage and store my 40V Kobalt batteries. Print shown was completed in PETG. This held up fine in an unconditioned garage during a Georgia summer. I have these spaced 19mm/.75" apart. This allows plenty of room to pull…
This is a tool holster I made with my specific use case in mind. The top rail has two larger slots meant for my ¼" 90 adapter and my bit driver handle, then two small slots for smaller screwdrivers. Then a slot made to hold pliers or side…
This model snugly holds a single Kobalt hex set on a honeycomb storage wall (HSW). Instead of using the classic screw or hex-based insert, this model uses a clip on design from KXY Design. (If you haven't already, check out their EZ…
Generated with the Gridfinity plugin for Autodesk Fusion and edges adjusted to fit the drawers.
This is a part tray with 4 separate sections with sloped sides to better help with part storage on site and the retrieval of small parts from the tray The pictured print was done in Creality Blue PETG
This is the third model of my goal to make 3D Printed french cleat mounts for all of my power tools in the garage. This makes use of the mounting point on the bottom of the leaf blower to create a secure mounting point to the french cleat…
Gridfinity holder for Small Kobalt Adjustable Pliers. May fit other pliers of a similar size.
After searching for replacement tips and finding nothing, I decided to recreate it myself. Works best with TPU (I used eSun 95A). These also fit a bit more snugly than the originals, but so far have lasted a lot longer than the original…
Just a gridfinity tray for your Kobalt multi-keys will probably work with other brands
Remixed existing design and scaled.
Simple 1x3x3 gridfinity holder for the Kobalt 25pc precision driver set (Model #68536) Update 1/15/24: added v2 which is contoured exactly to the driver instead of a flat bottom, and removed the rectangular space at the end since you can…
Kobalt 80V Snow Blower Parts Skids Frequently unavailable to order, never in stock in store. These are a great replacement. Print them in TPU or something else that is impact and cold tolerant. Use lots of perimeters/walls so that they…
Two trays to increase misc storage while using your CaseStack. both are 2x3 however one is 1.5" deep while the other is 3" deep. The pictured print is the 1.5" deep varient as that is more useful to me than the deep one. Printed in…
I wanted a sleek, slim and permanent solution to the lid falling back on my Mini-Toolbox. I designed this specifically for the Kobalt brand mini-toolbox, but it may fit others. This is a great solution to keep the toolbox looking like…
Gridfinity holder for Kobalt 4 Piece Hook And Pick Tool Set
Designed on F360, sliced with Prusaslicer. I used Prusaslicer modifiers for 30% infill in the arms and 15% in the backplate above the arms. I also increased the infill to 100% around the screw holes for more strength. It's mounted into a…
This is a carrier for 2 Kobalt 24v batteries. This requires the use of these locking holders. It requires 4x M4 heated inserts and 4x M4 button head bolts. This version requires support for the handle. .step file included for modification.