Counting matching models…
Dual output fan duct intended for the original KINGROON KP3S V5/MK8 hotend. I have redesigned the model changing the shape and output angle and seems to provide more output. Water test of my remix (100% speed original fan) Water test of…
Also available on GitHub How to use Download the latest 'KingroonX.X.X.zip' file. Extract the ZIP and move the 'Kingroon.idx' & 'Kingroon.ini' files and the 'Kingroon' folder to: \Prusa3D\PrusaSlicer\resources\profiles * 'Kingroon' should…
I saw the Kingroon KP3S selling for the price of about four spools of filament and figured I would buy one. After I set it up and used it for a while, I was very impressed with this little printer. Direct drive, linear rails on X and Y,…
Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S
Fan duct upgrade for kingroon kp3s Titan head. Previous one was melt in a day, so I remixed it. Print with ABS with 100% infill and use tree supports! (Screw holes must be bottom when printing) +I added duct for e3d V6 nozzles
Kingroon KP3S - Z axis Linear Rails: This is a upgrade for kingroon Z axis, with this upgrade you have a best result on Z axis and you can increase the Z-height of your printer to 225mm. In the attached documents you will find a pdf with…
Print settings: KP3S V6 Heatsink Cooler.stl - NEEDS SUPPORTS 5015 Fan Holder.stl - NO SUPPORTS KP3S Nozzle 5015 Duct.stl - NO SUPPORTS (print slower - high overhangs) You need to print 3 files for the complete assembly. Variations below.…
Y Belt Tensioner for Kingroon Kp3s This is a belt tensioner design for kingroon Kp3s, it is easy to assembly. Este es un nuevo diseño de tensor para el eje Y de la kingroon Kp3s, muy fácil de montar Other mods for Kingroon KP3s You can…
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
A maintenance pillar to support KP3S body placed sideways. It is placed under the aluminum profile of the Z-axis and is used for opening the bottom panel, etc. Sizes Height ─ 170mm + 4mm (protrusion at the top) Width x Depth ─ 20 x 20mm…
Reusable clips without damaging the GT2/2GT (width: 6mm) timing belts. (Although these are designed for the KP3S, they could be used for other applications as well.) Updated [ September 1, 2022 ] ────────── A shorter clip has been added.…
Replacement fan duct for the KP3s pro v2 (updated) the one with Display. Look at the position of the screws. A PID tuning is needed after adding the Duct. I made it from scratch and be happy about your feedback. I have added both versions…
This 5015 fan shroud is part of print head ASSY for Kingroon KP3S. See the “ KP3S — Modular 4010/5015 Fan Shrouds with BLTouch Mount — Kingroon ” page for more information. ────────── Update [ July 30, 2023 ] In addition to the…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
3D Touch BLTouch Mount Kingroon KP3S 3.0 Direct Drive FreeCAD Source Files Included I tired this mount by benjibigbro, but it was too low [ https://www.thingiverse.com/thing:4816601 ] Thank you benjibigbro for your awesome design. I…
Kp3s is a lovely printer but it is alarming how bad the firmwares found on the internet are - even the one from official website.. So I have decided to upload this marlin config for kp3s v3.. Because every config found on the internet is…
This is another version of my favorite spool holder design modified to work with the Kingroon KP3S Pro and the KP3S Pro S1. Can be printed within a 180x180x180 print volume STL and Step included if someone is interested in remixing to…
Kingroon KP3S - Compact, Slim and Quiet Power Supply Attached you can find all you need to assembly the Slim, Compact and Quiet Power Supply on your Kp3s. You will never have a separate power supply on your kp3s again. Adjunto puede…
Allgemeines Remix des bekannten “Top Mount spoolholder” für den Kingroon KP3s. Meine Version beinhaltet 3 wesentliche Änderungen: der Halter wird fest am Drucker verschraubt (benötigt 2stk M5x20 Innensechskantschrauben) der Haltearm wird…
We searched for 3D CAD data that could be used for KP3S design, but I couldn't find it, so I measured and modeled it by myself and share it. Notice: I think there are some wrong dimensions part because it's modeled by hand measuring, not…
Double nut knob for bed leveling screw of Kingroon KP3S. The leveling screw with a spring in stock condition is wobbly and prevents accurate leveling. By replacing the spring with an M4 nut and this knob , the screw can be fixed with a…
Bed Leveling test for Kingroon KP3S or other printers with bed 180x180mm Other mods for Kingroon KP3s You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate
This is a top spool holder for Kingroon KP3S Pro S1. (Mine is from Sliceworx.) So far it has been working great for me. The arm is a remix of Low hight spool-holder v23 for Kingroon KP3S, Aquila & Ender3 So that the roller of the Filler -…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
Adapter for a commercial aluminum tensioner for X-axis Other mods for Kingroon KP3s You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate Bill of materials: 1 unit - Aluminum belt…
To install this blowing option, you need to print out the modified vent holder housing. The distance from the bottom of the blowhole to the table should be about 3 mm. Fanduct only for kingroon kp3s - e3dv6 hotend titan extruder
Kingroon KP3S Pro V2 bed cable may be stuck into the stepper motor holder. With this solution I don't have to worry about this problem anymore. Explained in the video too from 6:42. Printed from black PLA without supports. For assembling…
kp3s orca slicer print profile Files Can be downloaded at: https://www.thingiverse.com/thing:6568286 I had to upload a link because Printables doesn't allow me to upload the actual Json files that orca uses for their slicer. however…
This is a Remix of the Aurora handle and spool holder for Kingroon KP3S Pro and S1. This version can mount spools of maximum 85cm depth, and can be mounted to have the spool both on top of the printer and left-rear side to use the…
My KP3S Pro V2 didn't fit with other designs, so I remixed it and reduced the height from the one by Mr. Baham https://www.printables.com/model/499596-kp3s-pro-v2-fanshroud And used in my review video:
SliceWorx design top handle for Kingroon KP3 Pro and S1 Use M5*25 hex cap head or button head screws for mounting this to any printer that has a 2040 extrusion vertical beam. Print settings: Orientation: Any flat side Layer : 0.16 mm…
X-Carriage designed to allow the use of Voron toolheads, StealthBurner/AfterBurner, with the Kingroon KP3S. Equipped with 3D Touch/BLTouch mount Equipped with ADXL345 accelerometer mount No supports required for printing STEP file…
This is a replacement for the Z axis stabilizer on Kingroon's KP3S pro V2, designed to remove the spool holder from the structure, to keep the external size the same as the KP3S pro (v1). See the assembly on the video below.…
MOD TESTING VIDEO: WARNING! Only tested with KP3S PRO S1 that has Y-axis linear rails and not v-wheels. This modification requires removing the power supply to attach extension screws to the side of the printer. But to remove the power…
Ich habe das Originale Fan Cover genommen und habe noch einen Ausgang dazu gemacht. Außerdem habe ich die Öffnung kleiner gemacht, damit man einen Lüfter mit der normalen Öffnung benutzen kann. Der andere mit der großen Öffnung ist für…
LED bar for kingroon kp3s, in this case it is a 5v rgb bar but you could put a different type of led strip I share the link to the led strip used. Its control is done by klipper LED RGB ws2812b IP30 60leds Barra led para la kingroon kp3s,…
Bed Leveling test for Kingroon KP3S Pro or other printers with bed 200x200mm You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate
holder 1 and holder 2 is table, that used rails of stock kit for thin spool and it is foundation of holder 3 for holding spool anything width. mod2 folder include parts for narrower spool filaments.
Direct Drive Orbiter v2.0 + V6 Attached you can find the assembly instructions and Marlin 2.1.1 firmware for this mod. This firmware is for F103 and F303 chip. If you have the last version of Kingroon, you need compiled the firmware for…
Kingroon KP3s Pro V2 - Fan duct Fantastic fan duct for kingroon kp3s Pro V2, inprove your layer fan and increase nozzle visibility FanDuct_v2.stl , this version is for extruder version V2 FanDuct_v3.stl , this version is for the newest…
This is a conversion for the KP3S to Vzbot 180mm. This can also be built just as a 180mm Vzbot, just designed the rails to use the rails from the KP3S and the KP3S bed. I have included a STEP file for people to use. The original design…
Originally found HomeGrown3D's Ender 3 version while looking for new knobs for the KP3S and thought the locks were very clever (will be adding to my Ender very soon). Posting monsieurglad's files here simply for convenience as I am…
BOM: 608ZZ ball bearing x1 M3 * 20mm screws x2 M3 nuts x2 M3 washers x2 (optional) Full details found here on construction and how to actually correct z-axis found here: https://www.thingiverse.com/thing:4748680 Make sure you properly…
Updated version 2. Updated the left mounting holes, Made the shell thicker (to 2mm). All categorized in maps KP3S Shroud Minimal V2: Minimal design for remix/own version purposes. No fillets were applied. The outlines for the 5015 fan are…
##################### ENGLISH ####################### 📁Files included: STL and STEP files for kp3s pro v2 original fan STL and STEP files for 5015 8500 RPM Gdstime fan*…
This height-adjustable fan duct and mount will work with the latest (titan) version of the Kingroon KP3S to allow you to use either the stock titan extruder or a BMG with a E3D V6, E3D volcano, NF smart, etc hotend. Some additional M3…
After about a month of intensive using my KP3S I discovered that filament dug a hole in the feeder intake wall. Here is my solution for the problem. I couldn't use z-axis top mounted filament holders, because the whole printer setup is…
The base must be screwed to the shaft with 3x M4x25 mm Allen screws. You also need 3x M4 nuts which are inserted into the shaft from the bottom. When installing, remove the top bearing plate , insert it into the base and slide the base…
KP3S is a great 3D printer, but needs a safety upgrade on heatbed cable, this is 3D printed strain relief for KP3S. It uses existing holes to be fixed with M3x16 bolts and nuts. Additionally, two zip-ties are needed with thickness smaller…
The parts are screwed to the extruder with M4 Allen screws. The parts are screwed to each other with M3 Allen screws and 2x M3 nuts will be needed.
Base para la fuente de alimentación de la impresora 3D junto con espacio para dos versiones de Mosfet y un pequeño cajón de herramientas habitualmente utilizadas para nuestras impresoras 3D.
Heatbed cable cover for KP3s Pro IMPORTANT: I recommend to print this parts on ABS or ASA, you can use PETG if you usually print PLA (bed temp 50-60º) IMPORTANTE: Recomiendo imprimir estas piezas en ASA o ABS, puedes utilizar PETG si…
Soporte de Filamento para la impresora Kingroon KP3S PRO, se invirtio el modelo original de https://cults3d.com/es/usuarios/Arts3Dlab para que la bobina quede a la izquierda, no requiere soporte para su impresión, el modelo fue impreso en…
bltouch mount for kingroon kp3s original head(for e3d v5) mount with m3 screws
KP3S Base by Squirrelbrain but remixed to have only a top and a bottom piece- for the people that have printers that are big enough to print them in one piece
I had been using the elephant filament guide on my KP3S, but after building an enclosure, the filament path changed and the filament would work its way out of the guide from time to time. This simple donut-style guide has no slot for the…
Cable guide for stock kp3s/kp3s pro head. Prevent cable from damaging. Fits perfectly.
Bought my first 3d printer, lovin it. but the lights leaking from the knob hole hurts my eyes. So i decided to make something to block it's light. As you can see on the photo, the raft on the center was not intended. But it fits nicely,…
Basis meines Modells ist ein Modell von Squirrelbrain von Thingiverse ( Link ). Die Einzelteile zur Befestigung des Netzteils entfallen bei mir. Die 8 Gehäuse-Teile werden mittels Einschmelzmuttern, DIN912-M3-Schrauben und den “Stegen”…
A knob for T8 lead screws that can be quickly turned with just one finger. It can be used with the Z-axis of the Kingroon KP3S and other printers. There are two versions, “Long” and “Short,” available. (*The stock KP3S is “Long.”) Each…
The design uses two 5015 fans with two fan ducts, one at the front and one on the left side. [THIS IS NOT NEEDED, THE FAN FITS ON THE LEFT SIDE FINE] To make space for the left side fan duct the 3010 heatbreak fan has to be rotated to the…
One of our members kindly sent us 2 Kingroon KP3S Pro V2 3D printer so we could take precise measurements and create a full CAD model. This will help us design and adapt new toolheads and upgrades specifically for this machine. We’re…
This is remix of these two holders: https://www.thingiverse.com/thing:5884524 https://www.thingiverse.com/thing:6082540
M3 Knurled Bed Leveling Knob for KP3S / KP3S Pro needs M3 Nut Thanks to scaryPug for the basedesign Category: 3D Printing
Stylish part cooling fan cover for the Kingroon KP3S printer, quick and easy to fit using the original bolts and allows good airflow as-well as shielding the fan from dust etc… Can be printed in standard quality on a 0.4mm nozzle, 100%…
Adjustable led bar neopixel for KP3s Pro, in this case it is a 5v rgb bar but you could put a different type of led strip I share the link to the led strip used. Its control is done by klipper You can buy me a coffee with a donation. Me…
This time there is no puny thin walls, too steep overhangs and friction fitting. Overall design is inspired by nehiLo's KP3S mount and select few(heights and fillets for screen cover) measurements are taken from there, shape of screen box…
I wanted something simple to tighten the x-belt. Keep in mind, this is a very tight fit. You might need to play around to make it fit. I printed it using PLA with so many walls, that its actually a 100% infill. The screw hole is 3.8mm in…
I created this design to adjust the gears on my KP3S Pro V2 as the gearing from the motor to the next one is offset.
Print with two pins and outlet on bed surface. Pins are for better adhesion to bed and should be broken off. Dont forget to remove the ring it's for support only. Add suport only at the bottom surface. 3 walls 4 top and bottom, 10%…
Hotend para la impresora Kingroon KP3S, incluye instrucciones de impresión y montaje
The Kingroon KP3S is capable of very fast printing speeds. For this, however, the filament must no longer be fed from the side, otherwise damage to the extruder will occur at higher speeds. Here is a version for a filament feeder for the…
Attached you can find the assembly instructions and Marlin 2.0.9.2 firmware for this mod. This firmware is for SMT32F1 chip. If you have the last version of Kingroon, you need compiled the firmware for SMT32F4 chip…
Fijacion reforzada de cables para cama caliente de Kingroon KP3S 6x Tuerca DIN 934 M3 2x Tornillo inox DIN 7991 M3x16 2x Tornillo inox DIN 7991 M3x12 2x Tornillo inox ISO 7380 M3x8 1x Brida 2.5mm Compatible con posicionador de fleje de…
This is a redesign following my thumb wheel clip for the standard KP3S bed carriage here . The thumb wheel used is neccessarily much larger than standard so that the clip can engage. The wheel was developed from the Fusion 360 file kindly…
A support to place a led strip on the kp3s PRO & PRO S1 printer, without screws or glue, just click and go.
Some upgrades to Kingroon KP3s. PSU mount at the back of the printer Position of PSU is not increasing footprint of the printer as from the left space is required for the wires anyway. All original PSU venting holes are left open. Switch…
I made this to work in conjunction with @DIYPERSPECTIVE's KP3S 3.0 Fan Mod - It may suit other uses. There are two files, print the one that suits your probe - No need for supports. Offset: Y - 0.0mm X - -28.5mm
Direct Drive DDG + V6 With this new version for kp3s pro can use all the bed surface(210x210), insert nuts version, adxl support, bltouch and inductive sensor. It is compatible with kp3s pro and kp3s pro S1 Attached you can find the…
Kingroon KP3s Pro - Z Stabilizer Bracket to stabilize and stiffen the Z axis of our Kingroon KP3S Pro and Pro S1. It is a very simple design to print and install. I have removed the two screws from the access cover and the axis remains…
MOD's para la impresora Kingroon KP3S
It is not pretty, but it works well. It clips onto the cooling block and is then fastened with screws. I attached a tiny PCB with a 24v to 12v step-down converter to run the silent Noctua fan. Two 24v blower fans do the part cooling. This…
We've designed a holder to fix PSU of Kingroon KP3S to the rear of the 2040 aluminum frame and share it. I heard that the strength of the parts may not be obtained depending on the environment, so I uploaded additional strengthened…
Kingroon Kp3s Pro V2 Extruder cable guide With this design you can fix the extruder wire and you don't need unplug or cut your ties to remove the extruder cap. This model only can use in the extruder version V2 and newest Commercial…
Update 03-08-2024 Uploaded a V2 with less obstruction for hotend fan Included .step file format to make mods easier It is a mounting plate for the DragonBurner toolhead (https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner) Huge…
Low filament cost, use 3 perimeters and maybe 20% infill. Support paint the overhang at the top as well as the peg. Optionally print the roller too, but it turns out the screw rod tube that came with the printer works as well if you cut…
Base fuente de alimentación para la impresora Kingroon KP3S versión Raspberry Pi
magnetic pei sheet alignment tool use on kp3s with silicone springs can be used on another printer To attach it to the printer bed I used 3M double-sided tape
for assembly- 3x 25mm 4mm hex screw 3x 4mm nut
Dragon Burner remix for PCB Klicky. One might need some adjustments. OnShape: - klicky: https://cad.onshape.com/documents/48e67d7ee058fdc055d5e6c5 - carriage: https://cad.onshape.com/documents/bd98455912488c341066ab60 From my klipper…
Soporte inclinado para la impresora Kingroon KP3S para montar la TFT de forma horizontal tras actualizar a Marlin. Para el montaje de la caja utilizar tornillos M3x10 con sus tuercas, excepto para el tornillo inferior delantero derecho…
already print the original version here https://www.printables.com/model/272114-kingroon-top-mount-filament-holder , but the sloop (insert on aluminum profile) is too loose and wobbles, so I redesign, it and make it bigger, longer and…
With this new version for kp3s pro can use all the bed surface(210x210), insert nuts version, adxl support, bltouch and inductive sensor. It is compatible with kp3s pro and kp3s pro S1 You can show all information and steps to do the…
NOTICE: This MOD is based on the KP3S PRO S1 dual rail Z-axis MOD and all precautions apply the same. However, it was designed based on the premise of using M4 bolts without drilling. *Additional design references…
Držák 3D touch pro tiskárny kingroon kp3s. Použité šroubky a matice M3. Není nutné sundávat kryt extruderu. Tisk vrstva 0,1 nebo menší. 3 perimetry, materiál Petg. Bez podpory.
Remix of https://www.thingiverse.com/thing:5317324 claw style fan duct for KP3S V3 Universal Adjustable fan mount (https://www.printables.com/model/216066-kp3s-v3-universal-adjustable-fan-mount). The original model after export from the…
Update This design is for the original KP3S pro with the pulley wheel drive for the Y axis. I have another design for the new bed carriage which comes with the Y axis linear bearing upgrade which you can find here The thumb wheel…
I updated my old test patten to work with to work on KP3s-sized bed. Use gcode file to run it straight on kp3s 3.0 original firmware.
Para proteger la pantalla táctil del Kingroon KP3S, diseñé este pequeño protector que se ajusta milimétricamente al marco.
Soporte para tensar la correa GT2 desde el motor Nema17 del eje Y de la impresora Kingroon KP3S
