MacBookPro USB-C dust cover
Made this to fit my 2020 MacBookPro to help keep the USB-C ports clean.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
- Downloads
- 44
- Likes
- 5
- Rating
- 0
73 models
Made this to fit my 2020 MacBookPro to help keep the USB-C ports clean.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
The RockPro 4x Stack allows easy mounting of up to four RockPro64 single board computers. Each RockPro can be fixed to a slide using any M3 screws you have around. The slides use a dovetail joint for secure mounting and click into place…
Print approx. €17.69–€21.62 excl. taxPreliminary estimate for one variant
You might want to use the 50% height option to save materials and printing time depending on how stable you need it to be
Print approx. €5.84–€7.14 excl. taxPreliminary estimate for one variant
Shockproof LoRa board mounts for Meshtastic nodes, using TPU printed models and PVC pipe parts. Choose the appropriate models for your LoRa board, print them in TPU and mount inside 2" or 2.5" (US) PVC pipe parts as needed. T-Beam NEO-6M…
LaceLockPro "Erlebe die ultimative Bequemlichkeit für alle Altersgruppen! Der LaceLock Pro ist nicht nur stylisch, sondern auch äußerst praktisch für Menschen jeden Alters. Für Ältere bietet er eine einfache Lösung zum Schließen von…
Quick printed Foldable Easel to display photos, HueForge pictures or logos. Can be scaled but do not change Z-Height! Printing: Material: PETG Layer high: 0.20mm Infill: 15-20% Supports: No Brim/Raft: No Post printing: Cut off the tiny…
Additional Material: 4 x M3 black hex brass spacer screws for the feed Notes I included the source file The pictures from the finished print are unprocessed, no sanding - nothing. Pictures are very bad quality since it is hard to make a…
Ein einfacher Kantenschutz 50x50x50 ohne Bohrungen Wenn ihr andere Größen oder Ausführungen benötigt schreibt mir einfach.
Constructed with tpu material for a smoother texture that is anti-slip, anti-scratch, and protects your remote. Slim design with precise cutouts that give you complete control of the remote and keep it like new. Anti-Lost Functionality:…
Case designed for the Rockpro64 board, can house up to 2 SSDs Designed by @MustyDuster & @Crazyk031 Modifications made by @mathiaspl20
Housing corner profile round and square (Gehäuse Eckprofil rund und Eckig) Meine Idee ein Gehäuse nicht im ganzen zu Drucken, da es zum Warping kommen kann also habe ich ein Eckprofil nachkonstruiert was sich auch individuell vergrößern…
ein einfacher Kantenschutz 50x50x50 mit jeweils einer ø5mm Bohrung zur Befestigungein einfacher Kantenschutz 50x50x50 mit jeweils einer ø5mm Bohrung zur Befestigung Wenn ihr andere Größen oder Ausführungen benötigt schreibt mir einfach.
An adaptor designed to fit a 2.5" HDD into a 3.5" HDD slot. Sliders could be generated which will fit into a HP ProDesk 600 G1 computer case. Multiple adaptors could be stacked and screwed together to fit multiple 2.5" HDDs into a single…
Olight Arkfeld holder for honeycomb storage wall edit 11-19-25: added model for ArkPro - needed slightly more clearance
If you’d like to say thank you, you can always buy me a coffee: buymeacoffee.com/the4n8 German: Gedruckt habe ich die Halterung mit meinem Voron 0.2 mit weißem PLA. Es werden keine Stützstrukturen/Supports benötigt. Du brauchst meine…
Stand for the MacBook Pro 16″ with integrated pad indentations that guide the stand into position and ensure stable lateral alignment. The height and steep angle of the stand mean that it takes up minimal space on the desk. Furthermore,…
Added models with chamfer for bottom and countersink screws. I did not test print the chamfered and countersunk files.The only thing changed is a .5 mm chamfer to the bottom and countersunk screw holes. One has a 1mm chamfer on the screw…
We've started moving toward more glass containers, especially canning jars as they are easier to clean and are more efficient in the fridge, cabinets and pantry. I needed a way to organize these leakproof lids. The design is module, print…
This print provides the user a way to mount a Rockpro64 and PCI-e to Dual SATA-II Interface Card (Pine Store version 2019) to a DIN Rail system. All mounts are by pressure; the fit for the PCB holes was tight once all 4 posts were in…
Inspired by peterholly 's design. m20 nut is optional to secure clamp to work table. m6/m5 x 16 countersunk screw and nut is optional to secure adapter.
A dock / holder for the Olight Arkpro series of flashlights. Magnetic charger snaps into bottom cavity in charger. The charger should remain loose but captured while snapped into place and the cable can be directed up / down / left /…
Container dimensions were modified to fit the WorkPro mini pliers set. This fits all six pliers.
Ein Kantenschutz 50x50x50 in einer optisch schlankeren aber stabilen Ausführung mit Fasen. Wenn ihr andere Größen oder Ausführungen benötigt schreibt mir einfach.
Ein Kantenschutz 40x40x40 mit abgesetzten ø4,2mm Bohrungen und Bodenkugel. Wenn ihr andere Größen oder Ausführungen benötigt schreibt mir einfach.
This is my first attempt at designing a case for my pine64 ROCKPro64 with space for one SSD (possibly a second SSD in the future) and a 40mm fan . The ROCKPro64 board can be screwed in place inside the case with 4 x M3x4mm screws and…
Supports pour 5 pinces Workpro Amazon pour tableau Multiboard à imprimer comme fixer au mur avec des supports pour les snaps
There are two models, one for printers without a multi-material changer and a multi-color model. The stitch sample / knitting sample is essential for a good result.
The “cover” that came with the chisel didn't open and close easily. Designed this to protect the chisel in a tool box or bag. For the WORKPRO W043005 Wood Chisel. May fit other 13mm chisels but the dimensions were made only from the…
A Holder for the Olight ArkPro (Ultra) Needs support to print. This holder doesn't include a charger. If you like to charge the ArkPro, consider using my Olight Flashlight Charger Stand für Multiboard
This is a small piece that slides into the blade lock on a workpro folding utility knife. It produces a clamping force on the blade, holding it more secure and prevents it from rattling. A properly held blade doubles the perceived quality…
https://www.amazon.nl/-/en/WORKPRO-Stripping-Automatic-Crimping-Multi-Purpose/dp/B0C2VMQ3LD On picture it is slightly higher than needed, because I misjudged needed height of the box. I am too lazy to fix it, but in second iteration I…
Zusätzliche, etwas größere Formscheiben für die emsa Gebäckpresse. Gedruckt mit PETG Additional, somewhat larger shaped disks for the emsa biscuit press. Printed with PETG
Just shortened the ends to fit my Workpro Power Drill
It is a kind of rollbar'' to protect the mechanism between the servo and the turning located under the servo. s with my plate (https://www.printables.com/cs/model/337463-spare-plate-instead-of-servo-on-e-revo) I didn't do the TRX…
I was gifted the Workpro 12 Piece Magnetic Screwdriver Set - W000879A but wasn't a big fan of the included wall mount and I had the space on my Skadis board so I came up with custom holders based on the original Ikea Skadis Screwdriver…
Split in half, and joined using a bow-tie pin. Fits on a single i3 bed. Several options exist for anti-slip feet, I'm using quilter's ruler sticky feet on both sides of the lift. Unfold the keyboard's feet and insert into tabs. Use that…
Das Modell besteht aus 17 Teilen verschiedener Größe, die zusammen ein Volumen von 5x5x5 Kubikeinheiten ergeben. Diese Teile passen in die Box. Wenn das Puzzle gelöst ist, zeigen alle sechs Fächen des Würfels das gleiche Muster, denn er…
Doubt anyone will have use for it, but here just in case some part of it is useful. I had a Thermaltake RC3400101A MAX-3543 sitting unused after I upgraded to NVMEs and decided I wanted to put it to good use as a backup server but in NAS…
Keeps dead flies from drying on the forks and prematurely wearing the seals. Old model that I made some years ago before owning my own printer, the protectors are still going strong however. They are asymmetrical and need to be installed…
These mounts allow you to attach a SideTrak mobile display to the top of your deskpro
My original Compaq drive rails were missing, so I reverse-engineered and recreated a replacement set. These rails allow standard 5.25" drives to be mounted using the original Compaq sliding rail system. Tested successfully with a Compaq…
(ENGLISCH BELOW) Hallo zusammen, eines meiner ersten eigenen 3D-Modelle die ich selber entwickelt habe. Diese Halterung dient dazu, das MacBookPro 15 unterhalb eines Regalbodens zu verstauen. An der linken Seite ist genug platz damit das…
I had a project that required a lot of small screws and needed something to keep them from disappearing on me. The walls are 0.8mm thick, I printed it with a wall thickness of 0.4 so that each wall is just two lines.
A simple mesh that is designed as a MacBook Pro stand.
Print vertically Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.
I made a quick stamp using the ICE OUT OF MINNESOTA post from BRLSQ. ICE OUT! Printables won't let me link BRLSQ for the exact file due to "bad language". Please google Burlesque of North America and give them full credit for the artwork.…
using round magnet 18mm x 5mm thick screw used is 35mm long x 4.22 wood screw mount to olight arkpro lite
I wanted a wall mount that I could stick to a wall in my motorhome to hold a torch (ArkPro Lite). The holder had to hold the torch securely while driving but release the torch easily when I needed it. I designed this to hold the torch…
Just purchased the Olight ArkPro Ultra and boy is it amazing. Wanted a way to mount it in my truck so I made this holster/mount that uses 3M tape to hold it in place. I made it so that the bulbs go in first to keep them protected and…
This is hold my Spyrus Key on the side of my MacBook Pro 2016
Workpro makes a nice three-pack of folding utility knives along with a box of spare blades. I like these because they are affordable, use standard box-cutter blades, and no tools are required for blade changes. I carry these knives in a…
Key elements of my EDC are the Workpro 4" mini-pliers, 711L mini-ratchet, and the Steinwhale bits and extender. I wanted to hold them relatively compact and flat. These jigs seems to do the trick. The Workpro and 711L tool bodies are held…
This is the feet I've created to snap into the Monoprice Weatherproof/Shockproof Hard Case (6.6 liters version - not sure about other sizes).
Esta es la versión flexible de mi funda para el Kindle de 4ª generación . Diseñada específicamente para ser impresa en TPU , esta funda ofrece un ajuste tipo "guante", manteniendo el dispositivo ligero y protegido sin añadir volumen…
Da die originalen Clips für meine Flügelabdeckprofile zu viel Spiel hatten und es unmöglich war diese festzuklemmen, habe ich mir kurzerhand selbst passende Clips gezeichnet und hergestellt. Nun paßt die Leiste und hält richtig gut. Als…
Example was printed with oil based ink and then watercolors used for tint and concealer.
I saw some of these prints online here and I thought it'd be fun to make a 3d printed block print out of Saturn. I print these out of TPU. Still untested, but hope to try eventually.
LED-Eckprofil 45° – mit einklickendem Diffusor Ich habe dieses Profil für LED-Streifen mit einer maximalen Breite von 15 mm in Fusion360 entworfen. Der Streifen wird auf die schräge Fläche im Kanal geklebt, das Licht tritt unter 45° zu…
This is a holder for my trusted connex knife. I have two versions of this knife and this holder fits both. The knive is available from different brands. If you found a new fitting model please write a comment and I will note them here. To…
A mount for the 100 piece Workpro SK5 61mm utility blade holder
A simple protective cover for the WORKPRO 150mm Hand Jigsaw to prevent accidental contact with the blade. Designed for easy 3D printing. 📌 Printing Tips: Print upright for best results Use brims to ensure good bed adhesion
Gridfinity 1x3 Holder for the WORKPRO 21-Piece 1/4" Mini Ratchet Wrench and Screwdriver Bit Set designed to be more compact than the packaging tray that came with it (which is approximately 2.5 x 3 gridfinity units as shown in the…
The Electrical KPR68 spacing extension is used to optimize the positioning of the KPR68 box relative to the wall surface, particularly in cases where deeper-than-standard enclosures are installed. Its primary purpose is to reduce the…
I snagged a couple of the WorkPro EDC folding knives from Amazon on sale for $8 for the pair but found the excessive amount the blade easily deflected side to side made it feel like I got exactly what I paid for. This shim goes around the…
My original Compaq hard drive mounting frame was missing, so I reverse-engineered and recreated a replacement. This frame allows a standard hard drive to be mounted using the original Compaq mounting system. Tested successfully in my own…
Have a nice day, everyone! I like to use phone navigation when I ride, but I'm not a fan of handlebar mounts because I find them dangerous, IMHO. So I decided to buy a popular shockproof phone holder and mount it onto the big navigation…
My original Compaq front cover was damaged, so I reverse-engineered and recreated a replacement. This cover is designed to fit the original Compaq mounting system and includes the characteristic guide rails and mounting tabs. Tested…
🛡 The Ultimate Tech Armor for Students, Teachers, and Commuters! Throwing your expensive laptop into a backpack shouldn't feel like a game of Russian Roulette. This heavy-duty, shock-absorbing hard case is designed to keep your mobile…
I made a quick stamp using the ICE OUT OF MINNESOTA post from BRLSQ. ICE OUT! Printables won't let me link BRLSQ for the exact file due to "bad language". Please google Burlesque of North America and give them full credit for the artwork.…
Esta es la versión flexible de mi funda para el Kindle de 4ª generación . Diseñada específicamente para ser impresa en TPU , esta funda ofrece un ajuste tipo "guante", manteniendo el dispositivo ligero y protegido sin añadir volumen…
I wanted a wall mount that I could stick to a wall in my motorhome to hold a torch (ArkPro Lite). The holder had to hold the torch securely while driving but release the torch easily when I needed it. I designed this to hold the torch…