576 models
Abwickler zum Umspulen von Filament auf eine andere Spule mittels Akkuschrauber wenn möglich im Übergang zum Gewinde 90% Füllgrad Die Version V2 bietet die Möglichkeit, innen eine Imbusschraube zu versenken, umd die Stabilität zu erhöhen.…
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
I had the idea to create this model after cleaning out my storage unit and finding some kusudama flowers my wife and I made together. Normally these are made from folding paper, and boy have I made my fair share of them. I thought it…
Tested and printed without issues using Cura slicer. 1 : 7 → 1 : 8 = 87,5 % Multiple scales are in ZIP files (1/18, 1/12, 1/7), download whatever you like. Picture with recommended print orientation of parts is included in ZIP (but it's…
I made it in the image of a traditional Japanese lantern. Necessary items in addition to 3D printer products A 60*120 piece of paper “ precisely " cut from A4 paper LED tape light Power supply Please refer to the image for how to…
Vielleicht kennt der ein oder andere mein Problem. Beim Drucken von Filamentproben verheddert sich das 3D Druck Filament und der Druck schlägt fehl. Doch hier nun meine Lösung für das Problem: ein Filamentaufroller für den Akkuschrauber.…
Keine Lust mehr die Spanngurte händisch auszuwickeln? Dann ist es allerhöchste Zeit meine Aufwickelhilfe für den Akkuschrauber auszuprobieren. Ich habe zwei Varianten erstellt: Spanngurte von 35 bis 50mm Spanngurte 50 bis 75mm PLA…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out other models in this same location, like Kaminarimon and Hozomon. ⚠ - - Please read the Print Instructions further…
The source marked this model as adult content.
Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out other models in this same location, like Kaminarimon. ⚠ - - Please read the Print Instructions further below - - ⚠ 宝蔵門…
A small mixer or stirrer attachment for (cordless) drills. Ø = 50 mm . It takes a 6 mm round shaft , which i just fixed with a small drop of superglue . I needed a small attachment for mixing smaller amounts (perhaps up to a litre) of…
Mei Kusakabe(My Neighbor Totoro)
Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
My family had a Blokus set missing a piece. Someone else thought I might be able to 3d print a replacement, which I can. I thought it was really cool that someone else thought of that though. I found some pieces on thingiverse, but they…
zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…
This model is optimized to print with a 0.4mm nozzle and 0.2mm layer height. If you choose to print it with a larger nozzle of layer height, the filament or the pieces may not fit properly. PrusaSlicer projects of my print setting are…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out the companion model, Hōzōmon ! ⚠ - - Please read the Print Instructions further below - - ⚠ 雷門 Kaminarimon ("Thunder…
Acoustic panel hooks as wardrobe or something like this. --- Garderoben - Haken für Akustik Panele oder ähnliches
I love the IKEA Markus office chair. Unfortunately, because of the not adjustable armrests and my sitting style, I never mount the armrests and that leads to a very annoying situation: the armrests mounting points remain uncovered and the…
Torii inspired by Itsukushima Floating Torii Gate Category: Household
Too lazy or cheap to buy a replacement gas cilinder for you Ikea Markus? Print this stopper to prevent the dreaded sag. Easy to print and in one piece for you to not waste your time. I printed in PETG to prevent warping with extensive…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. Check out other models in this same location, like Kaminarimon and Hozomon. ⚠ - - Please read the Print Instructions further…
basically saw someone on the internet selling this model and i didnt know that the name was, so i ended up modeling one myself. No regrets. no supports needed either.
Update: Fusion360 File added in case u have to customize it :D BUT Dont Blame me for my poor CAD Skills and the Messy File. ENG: This model is inspired by " TheBuildbay ", which I recreated in CAD and adapted so that armrest pads fit on…
Ein Halter für den Akkuschrauber Bosch GSR 18V-60 C. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
This is a simple mount to attach the KUSBA USB accelerometer to a 3d printer bed up to 7 mm thick. All you need is a few M3 screws and one nut. Check out my universal hot-end mount
Mount to hold the KUSBA ( Klipper USB Accelerometer ) board and is compatible with the Elegoo Neptune 4 Pro. It's designed to insert two M3 nuts during printing for the 5mm screws that hold the PCB to the mount and it attaches to the back…
Mount your Kusba ADXL345 USB accelerometer quickly on probably any toolhead directly to your nozzle to get most accurate readings BOM (I used for my build) M3 20mm x 2 M3 6mm x 2 standard 5mm Threaded Heat Set Inserts x 4 Please let me…
“MAJ : on m'a informé le 28.06.2023 que le STL s'ouvrait sur Pusaslicer, BambulaStudio, mais pas sur CURA, j'ai donc créé un nouveau fichier STL V2” La grande Vague Kanagawa Art3Dchoix 3D PAINTING version Hokusai, HUEFORGE Généré avec le…
a nearly universal mount for a KUSBA accelerometer some times mounting the board hanging off the end is necessary for the usb cable to clear the umbilical note: the hole pattern is different to the adxl345 uses a screw to clamp to the…
Ripped from Monster Hunter: World Posed with zero rigging experience. EDIT: Figured out original bones = new slightly better rigging Model very likely contains overlaps, errors. EDIT: Fixed most Good luck getting it printed Thanks to…
This compact travel set of the popular Blokus board game is designed to be small, easy to assemble, portable and still playable. It features a full set of pieces for four players, a folding game board and 2-piece hinged and latching box…
Torii inspired by Itsukushima Floating Torii Gate Category: Household
You will need to print 4 of the boards and 4 sets of pieces in different colors. Box for easy storage, 3mf for easy printing and pdf of the rules of the game included.
Update: I have changed the CC license of my models because of the lack of clarity around AI use. If you want to re-mix, reuse, rewhatever my model, just ask.. I made this mul gladiator in Blender based off Brom's classic painting of…
I realized that if you lose one piece, the whole game is useless. So when I took it on a trip with 15 kids I got very afraid and was looking for replacement pieces here. This configuration of adcurtin 's script works good enough for me…
IKEA Markus is a great office chair with decent part quality and very long warranty for an attractive price. However, there is one design flaw – the original armrests cannot be adjusted in any way and will most likely hit your desk. If…
This model is intended for the 8tool INDX upgrade for Prusa CORE One+. The model with the sample photos was printed with these 8 Prusaments: Pristine White Vanilla White Marble Grey Royal Blue Azure Blue Gentleman's Grey Mystic Brown…
Diese Halterung ermöglicht es einem den Akkuschrauber rechtwinkelig an eine Wand/Gegenstand zu hängen ohne dass das Eigengewicht auf dem Bohrfutter lastet. Die Halterung stützt den Akkuschrauber auf der Einstellhülse ab. Ich empfehle ein…
Viel Spaß! Category: Signs & Logos
Mount for the KUSBA Input Shaper working with all Ender S1 Models. There are two mounts: One which is mounted on the extruder. You'll need to temporarily remove the M3x6 screw and use a M3x10. (see pictures) One which is mounted on the…
Allgemeines Ein Halter für die Bosch GSR / GSB 12V Serie. Der Halter wird einfach in das vorhandene Fach Vorne oder seitlich am Systainer eingeschoben. Druckeinstellungen Drucker: Creality Ender3-S1 Schichthöhe: 0,20mm Infill: 15-20%…
A remix of my Travel Blokus game, Blokus Duo is 40% smaller and is perfect for playing with two people on the go! As with its original, it is small, easy to assemble, portable and playable. It features a full set of pieces for two…
A simple way to stop a Ikea Markus chair from moving.
Halterung für zwei Akkus von Einhell
This is a simple mount to attach the KUSBA Usb accelerometer to almost any 3d printer. All you need is a few M3 screws. Please note that this is only used to run input shaping and then should be taken off so that your heatsink gets proper…
🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. You'll need the free model for each featured building in this assembly, this entry is just the base platforms for each, they fit…
Eine Polsterdüse für den Makita Akkustaubsauger DCL 180 / 181 / 182. Passt wahrscheinlich auch für die anderen ähnlichen Typen - sagt es mir bitte. Kann ohne Support gedruckt werden.…
Passiv Halter für ein TETRA HRT Funkgerät Marke Motorola Typ MXP600 2 Varianten für Akkus mit 2900 mAh & 1900 mAh Gedruckt mit 30% Infill und Stützen im Bereich des Ausschnittes für den Halter.
Ich wollte mir schon länger einen Bohrständer für ein Akkuschrauber kaufen aber alles was angeboten wird hat mich absolut nicht überzeugt und so habe ich mir selber etwas konstruiert. Die Z Achse vom Bohrständer ist mit Misumi Linearlager…
this is a logo and kanji for a Kyokushin Karate dojo small version is glued to fine piano wire, the large is sanded, filled, sanded, primed, painted in Gloss Black and Red and finished with a clear coat and framed.
This is the sword that Sasuke Uchiha used throughout the majority of the Naruto Shippuden anime. This was my first 3D model and I only had access to Autodesk TinkerCAD due to limitations of hardware with Fusion 360 and Blender. I tried to…
Screw-in Covers for IKEA Markus chair as replacements for the original armrests. Tired of your Markus chair not fitting under your desk? I present to you this simple yet elegant solution. Printed in Prusament PLA Galaxy Black. Does not…
The original game was invented and mass produced by Mattel Games. I was unable to find the original to buy myself so I remodelled it from a few pieces I had. It might be a bit more expensive than buying it from a store but it is cooler to…
A mount for using the Klipper USB Accelerometer ( KUSBA ) with the Elegoo Neptune 3 Pro Printer (Plus / Max are also likely to fit but were not tested). You will need three M3 .8 screws with matching hex nuts to attach the KUSBA to the…
The LED Support was designed to work as an adaptor to install 5.75" LED headlights in the original support that the Honda Ruckus/Zoomer uses for the dual headlights. The LED headlights have a tab that you need to orient between the tabs…
HydroHocus – Endless Water Trick Vase 🪄💧 (Single & Dual Chamber) Bring magic to life with your 3D printer! HydroHocus is a 3D-printed modern take on the classic Lota Vase magic trick. To your audience, it looks like a regular vase that…
Gedruckt in PLA, keine Stützstruktur nötig.
Deutsch: Dieses Modell ist ein Modifizierung, damit der Bosch Profesional AKkuschrauber auch gut reinpasst und nicht schiefsteht, was beim Original der Fall war. Durch die Aussparungen passt der Akkuschrauber jz perfekt. Zudem habe ich…
Hello, I just re-created original Blokus Trigon board game. Printed it on Prusa MK4 with 0.20mm layer and 0.4 nozzle. All tokents and game board are printed from PLA. I highly recommended to print game tokens with brim. I printed game…
Simple thing, replacement for the 1x1 tiles in the game Blokus. I'll make more as i'll loose them. ;) Category: Toy & Game Accessories
I designed some mounts for kusba adxl345 usb pcb by maker panda for my Elegoo Neptune 3 Pro. For klipper resonance compensation/measuring: https://www.klipper3d.org/Measuring_Resonances.html Link to a good (german) documentation:…
I made this wall hook that fits on an acoustic panel from FibroTech, it fits inside the panel. It is made for panhead screws, and it has plugs that will hide the screws. It can also be used without the acoustic panel.
Kegel für eine 10mm Gewindestange z.B. zum umspulen von Filamentresten mit einem Akkuschrauber. Benötigt werden 2 Kegel (siehe Bilder) Schichthöhe: 0.24mm, PLA Infill: 25% Cubic je 4 Schichten (Wall, Top, Bottom) Durchmesser: ca. 52mm bis…
The armrests of my Ikea Markus office got damaged and I needed some caps to hide bolt holes. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: 160 Infill: 20 Filament: unknown PLA black Notes: Bottom Pattern Initial…
Make the part as strong as possible, use ABS (or PETG), print with 4 Perimeters, 4 top/bottom and >40% infill. If it fails, then under load and the load is, in the worst case, you, leaning on the armrest while sitting down on the chair.
If you love this chair, but don't like armrests this is the perfect hack for you. This cover hides the open screws for the armrests. No gluing or screwing necessary, the cover is simply pushed onto the two screw holes (A hammer can be…
Motoko Kusanagi Ghost In The Shell Category: Sculptures
Kokushibo comes to life as a dark and powerful 3D printable statue inspired by one of the most iconic villains in Demon Slayer. This sculpt captures his intimidating presence, flowing silhouette, and elegant yet terrifying design, making…
Partially original, partially remixed (attributions later in this section). Provides a solid dual-Z conversion using parts you may already have laying around, or are at least cheap and easy to get. This was for my Ender Extender converted…
A mount for using the Klipper USB Accelerometer ( KUSBA ) with the Elegoo Neptune 3 Pro Printer (Plus / Max are also likely to fit but were not tested). You will need two 20mm M3 screws to attach to the extruder and two .8 M3 screws with…
Wanted to test bed frequency using KUSBA adxl345, tried a few ideas and ended up on this. 24mm hole spacing m3x6 screws x2 Print settings: -no brim or skirt -.52 wide first layer -1.1 first layer flow to ensure its stuck on. For neptune…
After removing the original armrest there stays the ugly nuts. So I decided to design my own. A few minutes later was the first version done: printing testing, screwed it down fixing, resize the screws holes and make it suport les…
Ein Halter für den Akkuschrauber Bosch PSB 18 Li-2. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Conveniently run resonance testing for Klipper input shaping without having to change mounts. This mount clips on the top of the extruder for X-axis measurement, or clamps onto the bed for Y-Axis measurement. Designed to print without…
Ein Halter für den Akkuschrauber Bosch GDX 18V-200 C. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Battery Pack for Recycled - 13300 from disposable E-Cigarettes. https://www.printables.com/de/model/1008015-battery-pack-for-recycled-801640-fake-akkus
Halterung für 2 Stihl GTA26 Akkus AS2 (28 Wh, 10,8 V ), Öl - Flasche und Ablage für Kette. -------------------------- Holder for 2 Stihl GTA26 batteries AS2 (28 Wh, 10,8 V), oil bottle, and chain storage.
Aufnahme für Akkuschrauber an einer Lochwand mit quadratischen Löchern.
I bought a PS2 Hyakushiki SCPH-55000 GU but it didn't come with the bundled special stand. So here's my recreation of the stand. Print Print the two decorative plates in horizontal position for best quality. * Recommended layer height:…
Lost 2 of the 4 1x1 blocks. So I made my own. I've included the fusion 360 file in case you need to make other parts. I have some parameters on place to add blocks to the X and Y. If you need to make more unique shapes you can use the…
I started running sim racing games and I needed a brake for the wheels because I kept rolling away when pressing the brake. After studying the current alternatives, most of which require lifting the wheel, I decided to design my version,…
I'll print it in clear PETG with 99% infill. Adjusted the heights to fit my RH Logic 4 chair which is a bit high with the original. Here are 3 different heights with a 1 cm spacer as well.
Scientifically accurate model of a mononykus. The model features detailed feather and skin texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with a resin…
genügend Infill drucken ca. 50%. Wegen der Stabilität.
Česky Vánoční ozdoby – sada 8 kusů (STL) Sada osmi plochých vánočních ozdob určených pro rychlý a bezproblémový 3D tisk. Každý kus má vnější rám, horní očko pro zavěšení a vnitřní motiv s čistými liniemi. Vhodné jako dekorace na vánoční…
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
Ein Halter für die Lagerung von 3 18V Akkus der Marke Bosch A holder for storing 3 18V Bosch batteries Gedruckt in PLA
I don't have M3 Heated inserts so I modified the holes to be threaded M3 holes. Can secure the KUSBA in with M3x4 screws such as https://www.amazon.ca/gp/product/B0B3J35JSS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. The original…
Es handelt sich um einen Halter für einen Akkuschrauber
Hi, ich habe eine Wandhalterung für Bauhaus Akustikpaneele konstruiert, an der du meine Wallplanter aufhängen kannst. Die Halterung kommt völlig ohne Zusatzmaterial wie Schrauben etc. aus und beschädigt die Paneele nicht. Außerdem kann…
I really like @Markus_p's various card boxes based off @whity's Rugged box. It works great for UNO and other cards which are the narrow style. It didn't however work for Bicycle Playing cards and I really wanted to use it for these. Remix…
Hi, ich habe eine Wandhalterung für AKU Akustikpaneele konstruiert, an der du meine Wallplanter aufhängen kannst. Die Halterung kommt völlig ohne Zusatzmaterial wie Schrauben etc. aus und beschädigt die Paneele nicht. Außerdem kann man…
I made this led box for lithography by taking 4 works by hokusai. But you can decide to use any image as long as you respect the following measures 100 mm x 75 mm x 3 mm. Products : I used the leds: OUSFOT LED STRIP LIGHT model:…
Neu gezeichnet, da im Netz keine Halterung unter den Namen GSB gepasst hat. Genau Bezeichnung des Akkuschraubers siehe Bild und Zusammenfassung.
The source marked this model as adult content.
Höhere Version für Einhell Akkuschrauber mit Gürtelhalter. (Funktioniert auch mit Schlagschrauber oder Nagelpistole)
Hi, ich habe eine Wandhalterung für OBI Akustikpaneele konstruiert, an der du meine Wallplanter aufhängen kannst. Die Halterung kommt völlig ohne Zusatzmaterial wie Schrauben etc. aus und beschädigt die Paneele nicht. Außerdem kann man…
