P
Printablest0b1
Mounting bracket for XL4016 module
Mounting bracket for the XL4016 DC buck converter module from AZ-Delivery.
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 165
- Likes
- 18
- Rating
- 5
Search results: l40
119 models
P
Printablesfluffy0026
XL4016 Buck Converter Case
XL4016 Case XL4016 Case that can fit on 20x20 or 20x30 extrusion using T-Nuts T-Nuts used https://www.printables.com/model/243890-t-nut-m3-drop-in-rotating-v-slot Im using this to convert the 24v from the power supply to 5V 3A for a…
Print approx. €2.24–€2.73 excl. taxPreliminary estimate for one variant
- Downloads
- 125
- Likes
- 10
- Rating
- 5
P
PrintablesScrap King
replacement glovebox handle Mitsubishi Delica L400 S1
The ~26 year old ABS part MB424629 snapped, so i measured up the framents and came out with this. I printed mine on my i3 MK3S+ out of Prusament PETG with a 0.4 mm Nozzle and 0.1 mm layers i think, but i by no means optimised this. you…
Print approx. €3.96–€4.85 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 79
- Likes
- 6
- Rating
- 0
P
Printables3DJG
Electronic housing for XL4015 module (and similar ones)
Housing 1 for a module. Housing_2 for two modules, I use these boxes with the XL4015 DC/DC 5A converter module, powered by a 12V battery, to adjust the voltage to different components of my telescopes. Each casing requires four Ø3x8 mm…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
PrintablesTechRoomFun
Enclosure for Adafruit VCNL4040 Proximity and Lux Sensor
Low cost (0.10 $US) Enclosure for Adafruit VCNL4040 Proximity and Lux Sensor to allow for handling, use and mounting of the sensor.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesFokieH
Bracket XL4016 DC Step Down Wandler
Hier findet Ihr ein Modell von einem Bracket für einen Step-Down-Wandler. Diesen Verwende ich an meine Eigenbau Drucker um einen Servo mit 8V zu versorgen. Gedruckt habe ich das Bracket in PETG CF. Viel Spaß beim Drucken. Wenn Euch das…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 2
- Likes
- 2
- Rating
- 0
P
PrintablesRed Haniwa
LM2596 and XL4005 buck converter - slimmer
2026/03 update: Resize holes so screws can fit and grip better. Added new models for XL4005 and other variants. It's 1mm longer and have different board screw position. ===== 2024/12 update: Added a new v2024.12 with these changes: Even…
- Downloads
- 3,095
- Likes
- 377
- Rating
- 4.87
P
PrintablesBazzar701
Tiny F1 McLaren MCL40 - Mini Cars Series
Tiny F1 McLaren MCL40, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
- Downloads
- 789
- Likes
- 174
- Rating
- 4.5
P
PrintablesRed Haniwa
XL4015 CC CV buck converter case
2025/10/17 v4.0 Update: Make the ridges on the cap smaller so it would close shut without bulging. ----------------------------- 2024/10/09 v3.0 Update: Add ridges to the cap so it won't pop out. Enlarge trim-pot holes and merge them…
- Downloads
- 427
- Likes
- 33
- Rating
- 5
P
Printableselatobi
XL4016 Step-Down Buck Converter DC-DC
This is a Case for the XL4016 Step-Down Converter. The circuit board size is 65x36,5mm. The holes for the screws have a distance of 58 mm at the longe side and 26mm at the short side. The diameter of the hole is for 3x7,5mm sheet metal…
- Downloads
- 331
- Likes
- 31
- Rating
- 4
P
PrintablesSaniainen
L403A1 style handguard
L403A1 style handguard for airsoft use. AEG 31.8x1.5mm threads , screw in directly. Use spacer to fit your barrel and time handguard correctly. For example, One loop is 1.5mm, if you need to time 45degrees. 1,5mm*45/360=0,1875mm, in other…
- Downloads
- 307
- Likes
- 37
- Rating
- 0
P
Printablesfelixna
XL4015 Step-Down-Modul Gehäuse
Dies ist ein einfaches Gehäuse für das hier beschriebene XL4015 Step-Down-Modul: https://www.electroschematics.com/dc-module/ Es enthält eine Zugentlastung und Lüftungsschlitze. Ich benutze es, um einen Dell Wyse 3040 vom Druckernetzteil…
- Downloads
- 304
- Likes
- 32
- Rating
- 5
P
PrintablesRenba
LM2596 / LM2577 / XL4005 / XL6009 DC/DC Snap On Buck converter enclosure
Hi ! A small universal snap-on module for the regulator assembly based on the LM2596 Designed not in 'Gangnam style' but in 'prusa I3 MK3' style Cover specialy designed for my 2 projects related to the Prusa I3 MK3…
- Downloads
- 293
- Likes
- 26
- Rating
- 0
P
PrintablesRegis
XL4015 Buck DC to DC Converter - Box
Author : Mikael70 Link : https://www.thingiverse.com/thing:4270395 Thanks to Mikael70 for his work and sharing.
- Downloads
- 291
- Likes
- 36
- Rating
- 5
P
PrintablesMartin L.
XL4016E1 DC-DC Step Down Buck Converter housing
housing for a step down converter Link Amazon can be printed in PET (preferred) or PLA includes 2 cavities for zip ties to secure your cables inludes a version with “printhelpers” to improve adhesion to the bed and can be cutted off…
- Downloads
- 251
- Likes
- 13
- Rating
- 5
P
PrintablesMiKm
Case for Step-Down Converter XL4015 with 4 Digit Display (FreeCAD)
I created case for XL4015 converter, because I cannot find anything suitable. It is for this converter: https://www.aliexpress.com/item/32830922824.html DC-DC Converter Step-Down 1.25-32V 5A with LED Display - XL4015 Don't require any…
- Downloads
- 229
- Likes
- 18
- Rating
- 3.5
P
PrintablesC485
jl-12a300 / XL4016 case
Case with mounting holes for jl-12a300 or XL4016. It's a 300W stepdown DC converter. Print top cover upside down, PLA may have too low heat resistance, ABS and other would be better. Module is mounted on 4 plastic elementnts inside, you…
- Downloads
- 198
- Likes
- 8
- Rating
- 0
P
PrintablesMatej Cerny
Nvidia L40 fan adapter
Adapter to mount 2 40mm fans to Nvidia L40 GPU. Fans are mounted by M3 bolt directly to the plastic body. Adapter is mounted with original screws.
- Downloads
- 176
- Likes
- 5
- Rating
- 5
P
PrintablesRaschmaschine
Enclosure for XL4015 DC-DC 5A DC-DC Step Down Buck Converter Module
I needed an enclosure for a 55 x 25 x 16mm XL4015 buck converter module which I got from BerryBase . I recommend printing this in PETG since the module may warm up. No supports needed*. Use four M3x25mm screws and regular nuts for…
- Downloads
- 170
- Likes
- 12
- Rating
- 5
P
PrintablesZLAB3DP
XL4015 5A CC CV DC Step Down Converter Case + Din Rail Clips
For Case : 4x M3 5mm - 10mm Screw For Din Clips : 2x M3 5mm - 8mm Screw
- Downloads
- 136
- Likes
- 11
- Rating
- 5
P
PrintablesBombastus Hands
Piher PRL400 Spare Parts
Piher PRL400 Spare Parts I love these clamps in my workshop they are great tools. Now and then you might need replacement parts, it's a tool after all. Here it's the protection cap and also the platform piece . I carefully measured and…
- Downloads
- 136
- Likes
- 9
- Rating
- 0
P
PrintablesLegacy_Micro
BASIC MODEL: XL4015E1 Buck Converter Step Down Module (2 Versions)
BASIC MODEL: XL4015E1 Step Down Module (2 Versions)
- Downloads
- 131
- Likes
- 10
- Rating
- 0
P
Printablesjonnybergdahl
XL4015 Buck Converter Module Enclosure
This is a simple enclosure for the XL4015 Buck Converter Module that can be found all over eBay/AliExpress. Since the module has no mounting holes, I designed the case so the module can be mounted to the bottom part with double sided…
- Downloads
- 123
- Likes
- 10
- Rating
- 5
P
PrintablesNikdfish
XL4015 regulator enclosure
A small enclosure for a voltage regulator based on an XL4015. It has holes for ventilation. It fits boards like these: https://www.amazon.com/gp/product/B079N9BFZC
- Downloads
- 119
- Likes
- 4
- Rating
- 5
P
Printablesvaxxi
XL4015 plate holder (TENSTAR ROBOT variant)
I've got this XL4015-based holder for which none of the existing cases/holders fit (it has no mounting holes), so … flippity jippity. The board is 51x26 mm in size; depending on the manufacturer, there can be small variations - try…
- Downloads
- 119
- Likes
- 11
- Rating
- 4
P
PrintablesTrbyt
xl4015 CC CV Buck Converter Case
Small case for xl4015 based cc cv buck converter with holes for voltage and current adjustment. Preferrably print the lid with transparent or translucent filament to be able to see the status led. Photos coming soon…
- Downloads
- 105
- Likes
- 6
- Rating
- 0
P
PrintablesYorikMol
XL4015 Case
This is the case for the buck converter XL4015. To fixate the lid, you need to insert it sideways and then turn
- Downloads
- 105
- Likes
- 7
- Rating
- 0
P
PrintablesLegacy_Micro
BASIC MODEL: XLSEMI - XL4016E1 Based Buck Converter Step Down Module
XLSEMI - XL4016E1 Based Buck Module
- Downloads
- 104
- Likes
- 10
- Rating
- 0
P
Printablesarslan
Housing for XL4015 Step-Down Module with Voltmeter
Take your DIY electronics projects to the next level with this functional and protective shell. Specifically designed for the popular XL4015 module with integrated voltmeter , this case transforms a bare circuit board into a finished,…
- Downloads
- 103
- Likes
- 22
- Rating
- 0
P
PrintablesTwinForce
Dreame X40/L40 - protection ring sensor/docking compatible | Schutzing Sensor/Docking Kompatibel
To protect the robot from damage caused by sharp furniture legs, I designed a protective ring. The ring is sturdy enough to shield the top and slim enough not to interfere with either the laser sensors or the bump sensors. The rear tabs…
- Downloads
- 102
- Likes
- 29
- Rating
- 0
P
PrintablesDJ_Foot
DC-DC Converter Box for XL4015 Buck converter
This is a small box I made to house my XL4015 DC-DC Buck Converter. This enables me to plug-in any DC power supply up to 32V and then step down the output to any voltage from 0.8V to 30V DC. This unit can have its maximum output current…
- Downloads
- 101
- Likes
- 14
- Rating
- 0
P
PrintablesRobrechtDR
XL4015 Dynamite Power Supply
I Printed this is coloured PLA, Red for the lain body and black for the straps and PCB holder, printed with 0.2mm layerheight. Main Body 1x Strap 2x XL4015 Box 1x End 1 & 2 1 each Picture added of the XL4015 step-down module used.
- Downloads
- 97
- Likes
- 35
- Rating
- 5
P
PrintablesPurchenZuPoden
XL4015 DCDC Converter PCB Self-Adhesive Mount
This is a self-adhesive mounting plate for XL4015 DCDC Converters with display. If you want to remix it, the step file is included.
- Downloads
- 95
- Likes
- 12
- Rating
- 0
P
PrintablesXEKRO TuPapi
Case XL4015
- Adjusted the lid to fit better with the box. It also closes. - Added hole for nail in the lid. - Adjusted the input and output holes. - Increased height for models where the coil is vertical. - Added silkscreen of input and output…
- Downloads
- 92
- Likes
- 7
- Rating
- 0
P
Printablesjodo
Housing for XL4005 (DSN5000)
This is a housing for a XL4005 DSN5000 DC-DC adjustable step-down power Supply module. It has ventilation holes and cable holder on both sides so that you don't accidentally pull the cables from the power supply. The housing can be…
- Downloads
- 92
- Likes
- 6
- Rating
- 0
P
PrintablesCVS1401
DIN rail mount for XL4005 / DSN5000 / Xl6009e1
Needed a drop-down voltage regulator to give me a couple of amps of 12v on my 24v printer to run a 4028 fan. Mount is to add it to the DIN rail on the electronics panel on the back of the printer. It should be a light friction fit. “6mm”…
- Downloads
- 85
- Likes
- 6
- Rating
- 0
P
PrintablesArdumet_cz
XL4015 box pro DIN
XL4015 box pro našroubování dalšího dílu pro uchycení na DIN. Přesněji: https://www.printables.com/cs/model/446497-drzak-na-din-listu-pro-zavitovou-vlozku-m3
- Downloads
- 82
- Likes
- 3
- Rating
- 0
P
PrintablesRed Haniwa
XL4015 CC CV buck converter case w/ strain relief
This is the longer version of my other design to accommodate the addition of cable strain relief. I also moved screw holes to secure the board outside because its position change with every batch I bought.This is the longer version of my…
- Downloads
- 74
- Likes
- 14
- Rating
- 0
P
PrintablesMike @pix2proto
Ryobi Orbital Sander Dust Collection Adapter (PCL406)
Ryobi Orbital Sander Dust Collection Adapter (PCL406) ShopVac side has an Inner Diameter of 2.291" (58.2mm) Want to purchase a printed product? Check out my website:…
- Downloads
- 71
- Likes
- 7
- Rating
- 0
P
PrintablesDer_Sven
DUAL XL4015 case
I needed a case for two DCDC converters. One to power the Pi, and a second one for the 12V LEDs. I printed it in PETG, as it was in the machine, but PLA should also work fine. No supports needed. I made it specifically for these, but…
- Downloads
- 67
- Likes
- 9
- Rating
- 0
P
Printablesajenabi
Podcast Microphone (SL40) Table Stand
ChatGPT: Introducing our sleek, custom-designed 3D-printed microphone stand – the perfect blend of form and function for podcasters, musicians, and audio enthusiasts alike. This stand has been meticulously crafted to provide stability and…
- Downloads
- 62
- Likes
- 4
- Rating
- 5
P
PrintablesMegaHertz67
XL4015 DCDC CC CV module case
Case for XL4015 CC CV DCDC module The case is assembled using M3 countersunk screws. Special features: optional bottom part with a small 20mm wide opening to fasten the case with a thin velcro strap (see picture) If you want to see the…
- Downloads
- 60
- Likes
- 4
- Rating
- 0
P
PrintablesPavel Janeček
MR100104521 Side doors inner handle for Mitsubishi Delica L300 L400
About model Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica. ASSEMBLY ! You need to put your original steel nut into plastic insert first, rounded side in.…
- Downloads
- 60
- Likes
- 9
- Rating
- 0
P
PrintablesPhilip J Fry
L400 Delica Sunroof Shade Handle
Created using my original sun-destroyed handle as reference (1998 Royal Exceed) doesn'tdidn't quite have all the curves the original has on the face but it makes it easier to print. It's a tight fit but gives a satisfying click when it…
- Downloads
- 60
- Likes
- 2
- Rating
- 5
P
PrintablesArchimedesMP
XL4005 Buck Converter Simple DIN Rail Mount
I needed a DIN rail mount, so I designed one. Attention: The DIN rail I measured when designing this seems to have some odd dimensions (was a short rail from an unused fuse box). It fits that specific rail quite well, but on my other DIN…
- Downloads
- 60
- Likes
- 4
- Rating
- 0
P
PrintablesNERDCORNER
XL4015 Buck Converter housing
Find out everything you need to know about the housing XL4015 on my blog: https://nerd-corner.com/step-down-modul-dc-dc-lm2596s/
- Downloads
- 59
- Likes
- 6
- Rating
- 0
P
PrintablesRed Haniwa
XL4015 CC CV buck converter case with space for output diode
Remixed my own design to add space for a diode. This is useful for cases where you leave the buck converter connected to a battery all the time to prevent current back-flow. Category: Electronics
- Downloads
- 58
- Likes
- 7
- Rating
- 0
P
Printablesffejrxx
XL4015 XL6009 buck/boost box
box to fit dc-dc xl4015 buck or xl6009 boost boards screw hole on bottom, wire exits on ends side clips to hold boards slip together holds tight Category: Electronics
- Downloads
- 52
- Likes
- 5
- Rating
- 0
P
PrintablesSkynets MyDreamZone
Case for XL4015
https://pl.aliexpress.com/item/1005005730361457.html
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
PrintablesVoxel3D_NL
Pibox for Raspberry pi 4 + XL4005
Remix of the awesome case from John_Sinclair over at thingiverse . Widened the case to make room for an 30mm fan as well as a XL4005 step down buck converter! You can print with 3 perimeters & No Top or bottom layers to leave infill…
- Downloads
- 51
- Likes
- 10
- Rating
- 0
P
PrintablesKotyarko_O
Mitsubishi Delica L400\L400\Space Gear - seat adjuster (OEM: MR728482\75617L)
Seat adjuster hand for Mitsubishi L400, Delica L400, Space Gear. OEM number: MR728482\75617L Perfectly fits on 1999 L400 seat with original mount screw. All dimensions\curves\hights reproduced from original broken part. LH by default.…
- Downloads
- 51
- Likes
- 11
- Rating
- 0
P
Printablesforsaken_candy
XL4016 buck converter case with fan and DIN mount
This is for the boards with a voltage readout (see images). Adding a fan will allow you to use the buck converter under heavier sustained loads. You will need: 3010 axial fan M2/M3 screws Optional: M3x5x4 (Voron standard) heatset inserts…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
Printablesaweb
Dreame Robot Marble Caster Replacement (Fits L40, and probably L10 Pro L10s Pro X30 Ultra X40)
The front wheel/caster on my Dreame L40 broke in half. Apparently this is somewhat common. After spending 30-45 minutes disassembling it I decided I didn't want to have to do that again if it happened again, so designed this replacement.…
- Downloads
- 48
- Likes
- 18
- Rating
- 0
P
PrintablesMonaElKass
XL4016-BASE
A base for XL4016 to protect it, for easy use and to prevent touching it from the bottom when using it.
- Downloads
- 48
- Likes
- 1
- Rating
- 0
P
PrintablesExtraball
XL4015 mount for D-Bot
Mountable with M5x10 Category: Parts
- Downloads
- 47
- Likes
- 7
- Rating
- 5
P
PrintablesTim Martin
Delica L400 Dash Switch Panel Covers
I assume this is a standard size hole that is common across a lot of car models. but fro what its worth this was designe
- Downloads
- 47
- Likes
- 5
- Rating
- 5
P
PrintablesYodog
XL4015 Bracket
Updated version (v2) * of my XL4015 support bracket.* Now in one single piece, more compact, stable and stiffer. Designed to install the basic XL4015 board into the electronics box of my Ender-5 Pro (suitable for many other printers too).…
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
PrintablesS. Barsoumian
QSKJ DC Buck Converter XL4016
This is a very good buck converter for LED or other projects, capable of delivering 150W of power. You can find the link for the step-down converter here: https://s.click.aliexpress.com/e/_oCTKc3B
- Downloads
- 44
- Likes
- 5
- Rating
- 0
P
PrintablesKotyarko_O
Mitsubishi Delica L400\L400\Space Gear - windows master control frame panel
Windows master control panel (frame) for Mitsubishi Delica L400 (D4)\L400\Space Gear. Might fit for some another Mitsubishi with same age range (~1996-2003), like Pajero\Montero with 2 controlled electrical windows. This control panel…
- Downloads
- 44
- Likes
- 9
- Rating
- 0
P
PrintablesFuturaprint
Turn table foot stabilizer repare part Pioneer PL400.
Turn table foot stabilizer repare part Pioneer PL400. With time, the rubber part which englob the spring break. I design a new rubber part and printed it in TPU.
- Downloads
- 44
- Likes
- 3
- Rating
- 0
P
PrintablesModern Makes
Mitsubishi Delica L400 Window Nut
A replacement nut for the pop-out side windows on a Mitsubishi Delica L400. The main body should be printed out of a high-strength filament that can withstand UV, I recommend ASA/ABS/PC. You can add a layer of UV resistant resin if you so…
- Downloads
- 43
- Likes
- 4
- Rating
- 0
P
PrintablesKrux
xl4015e1 box
XL4015E1 with lcd BOX Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Plastika Trček PETG any Category: 3D Printing
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
PrintablesJpg Design3D
RYOBI RB18L40 18V AKKU 3D SCAN MODELL STL
JPG Design3D 3D Scan 18V Akku RB18L40 made with Einstar 3D Scanner.
- Downloads
- 42
- Likes
- 2
- Rating
- 0
P
PrintablesWiz
AZDelivery XL4015 converter box
I've converted an old iPad Air to run without battery and I needed a small box that contains the XL4015 converter used to lower the input voltage to the 3.73v that were provided by the battery. And so here it is. :) It requires 2 M3 brass…
- Downloads
- 42
- Likes
- 4
- Rating
- 0
P
PrintablesNERDCORNER
Case XL4015 Buck Converter long
Find out everything you need to know about the housing XL4015 on my blog: https://nerd-corner.com/step-down-modul-dc-dc-lm2596s/
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
PrintablesJonas
Bicycle light holder for Smart RL403R
Spare part for the Smart RL403R bicycle rear light. Can be mounted with a cable tie. Fits for a bicycle with a bar diameter of 31.5 mm. Other diameters should also work. Write a comment if you need the model with another diameter. I…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
PrintablesRene Aghajani
XL4015 Module Case
Best printing recommendation: . . Speed: 50mm/s Nozzel size: 0.5mm Nozzel: 205c Bed: 60c Filament: Elegoo PLA Wall counts: 1
- Downloads
- 38
- Likes
- 1
- Rating
- 0
P
PrintablesModern Makes
Mitsubishi Delica L400 Window Nut - Version 2
Here's my second version of the window nut fasteners for the pop-out side windows on a Mitsubishi Delica L400. The first version was more accurate to the original design and required an M5 nut to be glued into the body. You can check it…
- Downloads
- 37
- Likes
- 4
- Rating
- 0
P
PrintablesMarius-Andrei Mihalache
XL4015/LM2596 Holder for 3D printers
XL4015/LM2596 Holder for 3D printers Created a model to hold the DC-DC converter I'm using for the RPi on my Ender 3 Neo. Since i couldn't find one that fits my specific board, modeled one myself. Can be printed in PLA easily, with…
- Downloads
- 34
- Likes
- 6
- Rating
- 0
P
Printablesdonjoe
Dreame L40 Ultra, Vakuum Diffuser
Wird hinten links im Staubbeutel Kabinett, teils vor die Ansaugöffnung gestellt. Soll verhindern das der Staubbeutel die Ansaugöffnung blockiert und die Ansaugleistung schwächt. Vorher bitte messen. Höhe 120mm. Druck Settings. PLA 0.2 mm…
- Downloads
- 32
- Likes
- 8
- Rating
- 0
P
Printableskiwamu
case for module XL4005E1
material : PLA detail Power module for Batteryless tablet https://ishigame-machine-technology.net/IMT/archives/1721 Category: Electronics
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesBig B
XL4016 case
2025-06-24 UPDATE: Top lid should hold in place by itself now. I haven't printed updated version, but everything should be fine. Printed with PETG 0.16 layers 2 walls 20%infill Print with front face on the bed without supports. Buck…
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
PrintablesPhilip J Fry
Mitsubishi Delica L400 Fuse Box Extender
This frame clips into the existing fuse holder with a small pass-through to allow your added fuse wire taps to route out through the frame and has tabs that the stock cover (with the Japanese writing) clips into. Thus it raises the stock…
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
PrintablesDecapper
XL4016 Simpe Cover with 4040 mount
You should be able to print this with no supports. Make sure you run the wires through the supports supplied, and connect the wires before inserting XL4016 into cover. You could super glue or simply melt the inserts if it wont stay in place
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
PrintablesNERDCORNER
XL4015 Buck Converter short
Find out everything you need to know about the housing XL4015 on my blog: https://nerd-corner.com/step-down-modul-dc-dc-lm2596s/
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
Printablesoktkas
Prusa MK2.5/S Extended Electronics Case for XL4005
Print just like regular Prusa parts. Fits the frame just like the original. You need two extra M3 screws to mount the module.
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
PrintablesKotyarko_O
Mitsubishi Delica L400\L400\Space Gear - front door locking pull clip (OEM: MR230269\67395D)
Mitsubishi Delica L400\L400\Space Gear - front door locking pull clip (OEM: MR230269\67395D) More durable\thicker model - to prevent future broking. All dimensions\curves\hights reproduced from original broken part. Should fit on both…
- Downloads
- 29
- Likes
- 6
- Rating
- 0
P
Printablesantoxa2584
Sony PlayStation 2 FAT XL4015 PSU Bracket
A 3D-printable bracket designed to securely mount an XL4015 power module inside a PS2 Fat console. 🛠 Features: Custom fit for XL4015 PSU mod Requires 4x M2x8 screws for installation Strong and stable design for a secure mount Easy to…
- Downloads
- 28
- Likes
- 6
- Rating
- 0
P
Printablesyohannaftali
Case for XL4015 Buck Converter 5A with Display
Case for XL4015 5A buck converter with display Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 20% **Filament:** eSUN ABS Red Category: 3D Printer Accessories
- Downloads
- 27
- Likes
- 2
- Rating
- 0
P
Printableskyouma
Raspberry Pi 4 Case with fan and XL4015
I couldn't find a proper Raspberry Pi 4 case with fan and voltage regulator, so I designed one by myself. It's not fancy, but it does the job. You will need additionally: 1x Raspberry Pi 4 4x M3x30 countersunk screw 1x 40mm fan 4x…
- Downloads
- 27
- Likes
- 3
- Rating
- 5
P
Printablesyohannaftali
Cover Buck Converter XL4015 with LCD
Buck Converter Cover for XL4015 68mm x 40 mm with LCD attached ipt Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Yes **Resolution:** 0.2 Infill: 100% **Filament:** eSUN ABS Red Notes: I used ABS, temp…
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
PrintablesDJ_Foot
In-line DC-DC Converter Box for XL4015 Buck converter
This version is in-line and therefore as no requirements for a jack at all. Category: Electronics
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesSeven Raccoons
Box (case, enclosure) for XL4005 DC-DC Module
This is an enclosure for the XL4005 DC-DC module . I made it fairly spacious for easy cable management and better heat dissipation. It features mounting holes for various surfaces, and the top lid is secured with two screws. I printed…
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesJuicyLegend
The Juice Box - XL4015 Buck Converter Housing Printer Upgrade
I was looking for a box that could house the buck converters, because I was making the noctua fan upgrade on my Ender 3 Max and these were readily available to me. Unfortunately there wasn't a housing in existence for the XL4015 Buck…
- Downloads
- 21
- Likes
- 0
- Rating
- 0
P
PrintablesBarry Greig
AdBlue funnel for Range Rover L405 Hands Free
Uploaded 18th April 2026 Filling into the small 18mm tank opening can create a lot of overspill from non OE AdBlue containers. This funnel is designed specifically for my L405 Range Rover (though I believe it'll work for the Sport also)…
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
Printablesljhms
Bracket for Lampex KL402-14L light tube fixture
Replacement mounting bracket for a light tube fixture labelled Lampex KL402-14L , bought from Clas Ohlson around 2012. Note that the original uses an identical bracket on either end, that is, it's not mirrored. To achieve this, the T-slot…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
Printablesmadmen2302
Mercedes ML400 2014 SHADE HOOK
Shade Hook Part for Mercedes ML series 300 350 400 2012-2015
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
Printablesjaggar28
Delica L400 S1 - H1 LED Bulb adapter
The *.f3d file is attached in case anyone wants to edit it. I've printed this file in ABS using my Bambulab P1S, and it fits perfectly. Link: https://www.fnm.com.bd/product.php?pid=157
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
Printablesplammers
Box for XL4015 2-button Stepdown converter
Scaled the original "Box for XL4015 4-button Stepdown converter" down to accomodate the 2-button XL4015. Print Settings Rafts: Doesn't Matter Supports: Yes Notes: It is quite an exact fit so add +/- 1% (in the slicer) to allow for…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesAl Printfast
Reborn 2 Mount for XL4016E1 DC-DC Step Down Buck Converter inside the reborn2 electronic box
Mount for AZDelivery XL4016E1 DC-DC Step Down Buck Converter to power RPI4 with DSI Display and cam. Mounted inside the original Reborn 2 electronics box. Screwed with t-nuts to the right beam, the AZDelivery XL4016E1 DC-DC Step Down Buck…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesCDavid
Ryobi PCL406 Sander - Slat wall Mount
Securely mount the Ryobi PCL 406 Sander to the slatwall.
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
Printablesjaggar28
Delica L400 S1 (Gen 1) 1995, Read AC panel level cap
This is a cap for the Mitsubishi Delica L400 Spacegear (Gen 1, 1995 ) Rear AC unit control panel Hot/Cold lever and Rear AC vent control lever. This cap has been modeled in Fusuon 360 and printed using Balbulab P1S. I have printed it…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
Printablespeterholly
ROCKBROS RHL400LM GoPro Bracket
Needed to fasten the RHL400LM torch on GoPro hinge under my bike computer. For this purpose I bought this mount adapter. However the locking tongue did not fit the RHL400. Even when it would fit the torch is mounted upside down which is…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
Printablesjaggar28
Front Bumper Vents for Delica L400 S1 (Gen 1) 1995
This is a custom-designed mesh vent cover for the Mitsubishi Delica L400 Series 1 (Gen 1, 1994–1997), specifically crafted to fit the factory fog light holes on the front bumper. The vent cover consists of two parts: a front mesh insert…
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesRumDev
Delica L400 phone holder standoff base
A phone holder based to give a flat and level surface to mount a magsafe style phone holder on the dash area in a Mitsubishi L400 Delica. Use strong double sided foam tape or similar to stick it to your dash. The long line should be…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesMark Kubacki
link for a XOSS XL400 bike headlight
Goes between the headlight and the bicycle headunit holder, or GoPro receptacle. A mate’s bracket broke, so I’ve redrawn it. Original and this rendition suffer from several design defects, which I’ve not fixed; please don’t understand…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesHonzik1
Bosch MumXL40G MaxxiMUM MUZ5EB2 adapter for ice cream maker
I have used Prusa PC Blend for beater adapter and classic PLA for the pad. There is hole for neodym magnet 6x3mm for pad. Tested with chocolate ice cream yet :-) Works!
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesAD
XL4005 Step-Down Module Housing
I made this compact housing in Tinkercad, as part of my workilght project. The box itself features a 12mm hole for a panel-mounted 5.5mm barrel jack and a recangular hole (13 x 8 mm) for a rocker switch. For the output, there are two 5mm…
- Downloads
- 9
- Likes
- 0
- Rating
- 0