115 models
This very fast print can be mounted over any selfie camera (mainly designed for Tesla interior cameras). If you use it for laptops, ensure that it does not damage your display (as the Slider is not flush with the housing. Be sure to print…
This is a vertical laptop stand designed to hold 6 laptops and help manage their charging cables. It was designed based on the dimensions of an HP ProBook 450 G10 (15.6") and the charging cord that comes with it. The stand in the photos…
Einfacher Laptophalter, die Stangen Sind in verschieden Toleranzen verfügbar Simple laptop holder, the bars are available in different tolerances
Laptop cooler that reduces laptop fan noise and decreases temperatures. To the print itself: Material: Any PLA (I used Extrudr PLA NX2) Temperature: 205 °C (Prusa Slicer preset for said filament) Layer height: 0.3 mm The print worked for…
This is our model of a 3D-printed cooling pad for a laptop. It reduces the temperature of your device and can also boost performance. This design is inspired by the one from Mycero , but it is designed from scratch and it is pretty easy…
Original Model: https://makerworld.com/en/models/538757#profileId-455917 Modification: Extended the base and made a hook style to make sure the rear is supported and the front doesn't allow for the laptop to slide off…
This is a simple folding stand/riser for books, laptops, tablets, and keyboards...etc. Great for travel or just on the go. Measures ~243mm in length X ~64mm tall. It tilts the item in use at 16.3° angle. This is is a print-in-place model…
I created the stand for better airflow under the Laptop. Easy to print Material - PETG Perimeter - 3 Filling - Gyroid 15% Supports - NO
Vertical dual laptops and or tablet stand Designed 2021-01-22 thing:4732933 printables TOC Vertical dual laptops and or tablet stand TOC Summary Description Print Settings Buy me a coffee? Summary Minimalist vertical dual laptops and or…
This is a simple little Opening Tool e.g. to: remove phonedisplays open laptops/notebooks/tablets,… open/remove car parts remove E-cigarette-tank-glasses/atomizers or other areas of application…
Laptophalterung um den Laptop stehend am Schreibtisch zu positionieren. Das Hauptmodell habe ich von FizulNizam | Printables.com Wollte noch etwas Material und Zeit vom Ausdruck sparen und vielleicht noch etwas an 3D gewinnen. Breite…
Had an old 17" HP dv7 (my first PC) in working condition but with a broken keyboard and dead battery, and three 2.5" HDD from family members' laptops I upgraded to SSDs. Since the parts had been sitting in a drawer for years, I decided to…
*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…
I have a few thick laptops to organize. I did a single laptop stand design a few days ago and expanded on that. Some overhang on the middle 2 ribs, will probably need supports to prevent sagging. ***** Want to buy me a coffee?…
Universal Camera Privacy Cover for laptops and tablets. Different sizes. Fits screens from 6mm to 10mm thickness. Just slide on top. No glue required. Print with brim for better adhesion.
Has cutouts for surface laptop and surface book. Also seems to fit my HP elitebook well.
I liked the original design by @Kuba, but I needed it for two laptops, so I added a second one. It supports laptops up to 2cm thick. I also added some fabric to prevent scratching my laptop. I used eSun PLA Matte in White with 15% infill.…
I created this laptop stand for my Lenovo ThinkPad P16v Gen 2. It should hold other laptops as well, provided they are not higher than 26 mm.
Hey everyone! You loved my original single stand and the top request was a dual version. Well, here it is—and it's got a few cool tricks up its sleeve! My favorite trick: use it to hold the same laptop in two different ways. Just print a…
High laptop stand, designed for 17" laptops, without supports Originally designed for my Asus G17, but should fit most 15" or 17" laptops. The stand raises the laptop approx. 8-9cm at the front and runs upwards at a 30° angle. Laptop…
Intro: Basic laptop stand with vertical space underneath the elevated laptop. Ideal for the multi-screen situation where you have that extra little space open on the desk and you hand doesn't bump into the laptop or stand. Printing…
Simple Laptop stand for laptops with 22mm thick base.
Based on Adrián Vidal model, this stand can fit 4 laptops, each with maximum thickness of 18 mm with optional filler
I have a System 76 laptop that opens 180 degrees. I needed a laptop stand that would get the keyboard out of the way and raise the monitor to eye level. I have a ASUS ROG Strix 17.3" and Kinesis keyboard and Logitech mouse as my diginal…
Keep your desk clean and organized with this minimalist vertical laptop stand. Featuring a modern truss-style design, it’s both lightweight and sturdy. I have prepared 5 different widths to ensure a perfect fit for any device, from an…
Another version of cooling legs that fold into each other
When I wanted to add a second M.2 NVME drive to my Dell Inspiron 5502, I discovered that the laptop did not come with required hardware. I needed to buy Dell part KYMC9 to install the drive. But what are 3D printers for? After a little…
A laptop stand with slots for different laptop sizes, for anyone who has too many computers at home. Two slots 24mm wide (enough for Dell Precision 5530) Two slots 21 mm wide (Enough for XPS 13 and Zenbook14) One slot 17 mm wide. (Enough…
About the different models 2x HP G10 This is a laptop stand for HP G8, G9 and G10 the maximum width of the laptop is 22.5 mm 2x HP G10 + Scanner This is a laptop stand for HP G8, G9 and G10 The maximum width of the laptop is 22.5 mm This…
Just download both original_stand.stl and laptop_stand.scad, open the latter file in openscad and edit the last few lines.
This is a versatile laptop stand that works for holding laptop vertically beside your monitor or if you plan on storing your laptop for efficient space utilisation on your desk. This product makes a good gift for office colleagues as…
I made a VESA monitor arm mount for my laptop about a year ago. I think it's one of the things I 3d printed and use almost every day since. Easy to move away and also protects the laptop with the frame. Stays cool with 3xNoctua 120x25mm…
Printed on .2 layers; 3 perimeters; no top/bottom layers in PLA and also works on PETG. Print with out top and bottom layers and a cool inflill to save filament and make it cooler. I add silicone circles to make it non-slip. (Cut little…
This is a laptop cooling pad for use with laptops with a 3:2 aspect ratio. Designed this to run the wonderful Noctua fans. Noctua NF-A9x14 PWM https://www.amazon.com/gp/product/B009NQM7V2/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
I designed a stackable 4inx4in tray for my job in a computer repair store. I frequently work on laptops, desktops, and many other types of computers. These screw trays are designed to be fast, cheap simple, and easy. They hold screws and…
This laptop stand looked awesome, but I needed something similar that could hold three laptops, so I recreated it to fit my needs. It now supports three laptops with 20 mm spacing between the slots and uses flexible TPU-printed inserts…
USB-C/Thunderbolt-Ports are left easily accessable, so a single cable can connect mouse, keyboard, monitor, power supply, ethernet and storage.
I needed my laptop to stand a bit higher on my desk... so I made a stand for it.
Laptopständer aus 3 Teile, die einfach zusammen gesteckt oder auch geklebt werden können. Abmessungen Ca. 25cm tief Ca. 9,5cm hoch Ca. 27,5cm breit Neigung 26° Druck: Layerhigh 0,2 Fill-in 10% Gyroid Druckplattenhaftung keine nötig (Brim…
It has three slots for 2 MacBook Air and one M1 MacBook Pro. It features the housing for three cylindric magnets whose job is to keep the MagSafe end of the charger when not in use. Contrary to what I thought, the M1 is actually thinner…
To build the base you will need: 2x 120mm PC fans. (You can also use old ones you have lying around at home.) (I used ARCTIC P12 120mm) Six M3x8 screws and a screwdriver 8x M4X35mm countersunk head screw + nut Step-Up module (USB breakout…
Remix of the desk hanger, stem is trimmed to 26mm. Printed in with Creality k1se with Creality Hyper PLA black and 0.2mm layer height.
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Case for laptop motherboard(ASUS N56VB). Add led strip with diffuser and wifi controller. You'll need to fine-tune it with a file a little. You can add polycarbonate as case cover
zeichnung liegt bei | drawing is included
Under desk mount I created for my Ikea standing desk. Holds up to two laptops or tablets with a thickness of up to 2 inches. Requires 6 screws to mount to underside of table top.
A lightweight design of a vertical laptop stand that can hold up to four devices. The left (L) and right (R) sides are connected with a 12 mm diameter copper tube - but anything else can be used (wood, carbon rod). The width of each piece…
This is a keyboard stand designed mainly for laptops. So why: I love my gaming laptop but what I hate is the keyboard so what did was, I designed a stand that sits over the keyboard of your laptop and you put your keyboard on top, it…
Shoud fit HP 150w Laptop power adapters.
I made a nice flush-sitting plug for the ethernet port in my Thinkpad X270. It should fit the same for all Thinkpad models with the same case (So all X2x0 Models) and other models with the same 2mm recessed plug. I printed it in TPU…
Helloooo! I designed a little Macbook Stand in order to prevent my fans from spinning at 100%. So I decided to print a nice looking stand. Its measurement are 140x60x60mm (wxdxh), your Laptop can be 18mm thick (I used a MacBook Pro 16"…
This was initially made to be just the orange but after I got to thinking about it i wondered if plywood could be glued to it and finished. After some experimenting here it is. PETG glued to ¼ " birch stained blue. The birch was laser cut…
Just a little replacement pad for the TrackPoint or for those who aren't sure, It is a small square stick usually placed between the G, H and B Keys on your keyboard. This cap is designed to fit very well EASY TO PRINT Uses less then 5…
Upgrade your workspace with this versatile tablet and laptop stand/dock , thoughtfully designed to accommodate multiple devices — even when they’re in protective cases or keyboard setups. Device compatibility highlights: ✔ Supports iPad…
The first version of the inclined stand for a notebook. Intentionally simple design to save material and respect the limits of the I3 MK3 printing area. The spacer bars are reinforced with a rim that increases the stability of the stand…
Macbookständer mit kratzfestem Inlay in TPU. Ich habe den Halter auf einem A1 und X1C gedruckt. Ich habe an der Unterseite noch Antirutschpads angeklebt. Gedruckt in weißem PLA und die Inlays in TPU.
I've designed a very simple headset holder to put in the back of your monitor screen. It was designed for a 15mm max thickness, but feel free to remix the model or modify it to adapt to your monitor. Printing sideways is recommended
inspired by another design i remixed it into this. the original design was a little small for my laptop, and i wanted it to be more personal. hence i changed created the arrow beam, to match the logo og my internship. made the hollow part…
Bigger gap have 20mm, smaller 19mm. Printed in PLA 15% infill, 3 wall loops
These are some little catchy thingies. I used some 2020 extrusions I had lying around to create a frame attached to the vesa mounting lpate on my monitor arms. Now I can put my laptop up there and get some use out of it's screen.
Simpler Laptopständer für alle Geräte in 2 Versionen. Der Große ist für Laptops ab 17 Zoll, hier wird jedoch ein größerer Drucker benötigt um perfekte Ergebnisse und Haltbarkeit zu erzielen. Für weitere 3D oder 2D Daten gerne nachfragen -…
DJ Support Kit for headphones, cell phones, laptops and DJControl Mix Orange Edition
Added 1.6 cm 2 and 2 cm 2. Removed the curved part on one end, as I want it to go to the wall.
I made this design to improve the refrigeration of my gaming laptop because my laptop stand isn't prepared for gaming laptops. Stand thickness: 2.6mm
Tired of searching for USB-C Docks for your specific laptop model or you simply want to use your case? Well i got you covered. The adjustable Dock provides a nice seat for your laptop, or the laptop after, and after… well you get it. The…
Laptopstand with wood plate as horizontal support. Board dimensions: Length: 220 mm Thickness: 19 mm Width: as desired
This is a laptop stand designed to hold a 14" machine, up to 24mm (roughly 1in) thickness. I've tested it mostly with Lenovo's T14 g4/5, E14 g5/6, or dell 7450 notebooks. The base is 130x130mm, total height 96mm. Using 20% infill, total…
The lenght is variable. I use it for my 17" laptop. Printed in PETG
With these hooks you can attach your L13 Lenovo laptop to your monitor (BENQ GW2270H)
Dieses Modell habe ich selbst entworfen, um ein Problem zu beheben, nämlich den heißen Tisch unter dem Laptop. Wenn das auch die Lösung für ihr Problem sein soll, dann nutzen Sie gerne mein Modell
I often need a screen of some sort in to be free standing on my desk, e.g. when connecting a laptop to a larger monitor and wanting the two screens side by side. Conventional stands can be used to raise but for the above application they…
Simple Strong Sturdy Stand for a 2018 Macbook Pro 13 will work with any laptop up to 14.8 mm thick. Use a thicker linewidth for strength I used a .6 nozzle with .6 line width with 20%infill feels sturdy enough because of the chamfers. Use…
Stand for a closed laptop (in combination with a docking station or just to put away your laptop). Will be suitable for most main stream laptops, I'm using it for a Dell XPS 15 and Dell Precision.
VERTICAL HOLDER for 2 laptops and a phone. Slots width for laptop: 12 mm and 21 mm.
Ich habe mir einen Laptopständer gedruckt, der die Handgelenke beim Tippen entlastet. Je nach Laptopbreite können 2-3 Ständermodule mit den Verbindern kombiniert werden. Laptop drauf und fertig... Kann auch als Tabletständer genutzt werden.
This model keeps a 2 in 1 laptop in tablet mode in a convenient spot for watching entertainment on a fight. I've used in on a Framework 12 This is a very simple model, it only takes a few grams of plastic. I've so far only tested it on a…
A foldable and portable laptop stand – practical for use in offices with changing workstations. To assemble it, you’ll need one M5 screw (M5x100) and two nuts (ideally locknuts). Instead of using a long M5 screw, I bought a threaded rod…
I redesigned the object because it seemed a bit small and I wanted my laptop to be higher, so I made it 30mm in diameter
I was a little concerned that the charger of my new laptop gets this hot. I know it is meant to heat up, but I still didn't want it to hurt my hand. This way I am not paranoid that it is a fire concern. I built it for the screws I had…
Supportive feet that elevate laptop motherboards.
Print: 2x Part1 1x Part2 and easily put them together
I re-designed the middle part of the selected laptop stand to 295mm. Please have a look at the origin designer.
My Lenovo laptop was getting very hot, but since the processor is in the screen, there were no coolers for it, so I made an adapter for an old computer fan measuring 80mm x 80mm x 10mm so it could be mounted on the laptop. Other larger…
Check out a new version in this remix: A New Day, A New Dock Saves time - plugs in all these cables at once: power cord, HDMI and USB. The power plug can rotate in a slot to allow more cable routing options (see long video for a demo).…
We needed a solution for storing our spare devices—such as laptops—in a way that allows access to any individual unit without having to move the others out of the way. The mount needed to be expandable. The model is designed so that the…
Slide it shut when you're not on a call. A thin sliding shutter that prints already inside its frame: stick the frame over a laptop or monitor camera with a strip of thin double-sided tape and slide to open or close. Six on a plate.…
Bei der Arbeit nutze ich gerne einen USB-Hub. Das Problem ist nur, dass dieser 'in der Luft schwebt', wenn er im USB_A-Port steckt - das könnte zu Schäden am Gerät oder am Hub führen. Also habe ich einen kleinen Abstandshalter gedruckt,…
A vertical desk stand that holds a closed laptop on its long edge, freeing the ports on both side edges - dock on USB-C at one end and Ethernet at the other. The honeycomb is not just decoration: every hexagon in the walls and the base…
"The Eye" – A compact, interlocking laptop stand for on the go. My goal was to create a simple, minimalist laptop stand that is easy to clip together and slip into any backpack. I wanted a solution that is ultra-portable but offers full…
### About This Model Free up valuable desk space with this custom vertical desktop dock specifically tailored for HP G7 series laptops (such as the EliteBook or ProBook G7). This stand keeps your laptop upright and secure while connected…
Printed on .2 layers; 3 perimeters; no top/bottom layers in PLA and also works on PETG. Print with out top and bottom layers and a cool inflill to save filament and make it cooler. I add silicone circles to make it non-slip. (Cut little…
A remix of an under desk laptop storage solution. I have a 14" and 16" Macbook Pro. This allows me to store them out of the way, and easily switch between my work and personal laptops.
This laptop stand looked awesome, but I needed something similar that could hold three laptops, so I recreated it to fit my needs. It now supports three laptops with 20 mm spacing between the slots and uses flexible TPU-printed inserts…
Simple Strong Sturdy Stand for a 2018 Macbook Pro 13 will work with any laptop up to 14.8 mm thick. Use a thicker linewidth for strength I used a .6 nozzle with .6 line width with 20%infill feels sturdy enough because of the chamfers. Use…
I needed a new vertical laptop stand for 3 laptops. This is remixed Mathew B's design(originally designed for 6 laptops). This stand features a raceway for the power cables to run underneath. I printed this out in PETG with the 0.2mm…
Nice laptop stand for thin laptops. 17mm slot for the laptop. Easily scalable in slicer.
Modern stand for laptops up to 17 "with only 4 printable pieces. The pieces of union are 0.2mm smaller in width and gorsor so that they adjust well to the main parts and the objective is that they are subject to pressure, but it can be…
