Counting matching models…
I made this filament guide to be used with a left-sided spool holder, also on my profile. Uses the original spool holder screws. Can be printed out of PLA. Doesn't need supports. (I'm not very good at designing these technical parts so…
Wall Mount - Side fastening system with security clip - Sistema di aggancio laterale per pannelli Recommended Filaments: PETG - PLA+ - ASA - ABS Hardware needed: Screws as per assembly requirements All our designs are free to download and…
Thanks for stopping by! This page has two uses: one is for you to access an equilateral triangle SVG for your TinkerCAD profile to create knurling, and the other use is for you to print a quick torture test of a cylinder with knurling…
A tall quadrilateral shaped building that I made for a gundam model diorama. Sharing for anyone to use! If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy!
Medical and chemical labs use lateral flow tests to test for the presence of specific compounds in a sample. You may already experience with this type of common lab test in the form of a home pregnancy test. This cassette is a holder for…
This model is compatible with the lego system.
Según los manuales de ensamblado, se sugiere que el cable del extrusor vaya por detras, apoyándose en un clip que va sobre el motor izquerdo de Z. Lamentablemente esto ocasiona que el cable se doble y deteriore cuando el extrusor hace…
I made this left-side spool holder to be used with a filament guide, also on my profile. You will need a couple of screws and bolts. Can be printed out of PLA. Needs supports. (I'm not very good at designing these technical parts so feel…
This model is compatible with the lego system.
I had wanted to have access to boot, reset buttons and pins at the same time. So I decide to make lateral support. Since there is no much space for screws, there are pins (only in openScad version) that since they are very small, they…
Soporte para tubo de cortina. Diseño de gancho y soporte en "U" Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.32-0.48 mm Infill: 15-20 % Filament: Jamg He PETG Grey Category: Household Supplies
This new component provides direct support from the bracket to the floor, accommodating the footprint of the Anti-shake construction base. Without a doubt, the Vanilla MKGRL lateral spool holder bracket is what I was looking for. However,…
A square-based pyramid where all of the edges are the same length.
Essa grade protetora do cooler lateral, ela além de proteger o cooler de entrar filamento dentro dela ela também protege a hélice caso aconteça acidentes com a impressão e ela suga o ar da cabine de baixo para cima. Eu fiz com carinho…
Modded for a new X1C chassis. Printed / tested.
Quería montar un Equipo Informático de Productividad en mi zona de estudio ( para ofimática y navegación Web) que a la vez que fuera eficiente energéticamente tuviera suficiente potencia y no se quede corto a medio plazo, además debía…
This is a remix of my Cable Tie . On this one the tie is set upright . It has 2 advantages: you can make the cable tie almost any length. Fusio360 provided here you can see how easy it is to change the length in Fusio360 (resizen 2/3…
This was designed for wire shelving from ClosetMaid with 1" wire spacing and ~0.13" dia coated wire, may work with other manufacturers. Printed on Bambu Labs X1 Carbon using matte PLA and the stock “0.20mm Strength @BBL X1C" build…
This is a filament guide for Anycubic Kobra, ideal if you have a filament holder on the side of the printer, or in my case a dryer. It guides the filament from the side, and can be mounted in the two holes on the printer sides of the…
Printing Instructions: Material: PLA Nozzle: 0.4 Infill: None Perimeter: 6 Top and Bottom Shell: 0 Leyer Height: As you wish, I recommend 0.3 Make sure to keep the perimeter to the point where you have the little gab as shown in the…
tronco di legno cavo all'interno e terminale da incollare
Equilateral triangle
What does the title of this mean? Bilateral symmetry is where a pattern repeats left to right, but not radially. So, this top looks very different staring down the X axis than staring down the Y axis. Even so, it is very stable and spins…
This requires two additional pieces of hardware per nozzle: A 3030 M3 Spring Ball Nut An M3x16 screw To install: Insert the spring ball nut a bit to the left of the tool dock, with the hole towards the right. Insert the nozzle brush…
Repuesto de las Empuñaduras laterales RadioMaster TX16s.
A clean and simple geometric model, the Triangular Bipyramid is formed by mirroring two equilateral tetrahedra at their bases. This design is perfect for educators, geometry enthusiasts, or anyone looking for an elegant display piece. Its…
Honda Side Cover Collar - Africa Twin RD03_RD04 and many other models - Collarino Carene Laterali Honda Part Number 84702KV0670 - 84702-KV0-670 The Collar is used on 9 models from 1990 to 2014: Honda VF750C Honda VT1100C2 HondaVT750C2…
Windproof buttons for standard mosquito nets to be mounted on the side parts of the net.
Sovol SV08 Side Filament Roll Required: -2 M4 screws larger than 10mm -2 M4 screws larger than 15mm IMPORTANT: use 2mm nano tape
Attention This project is still a work in progress and is based on a MFT 800 work bench. While I have printed and tested all the files, there may still be issues, If you notice anything amiss, please let me know so I can address it. Not…
This model is compatible with the lego system.
This model is compatible with the lego system.
He diseñado este porta carrete, para que se pueda poner en el lateral de nuestras impresoras, decidí hacer este diseño por que es incomodo tenerlo detras de la impresora y porque al tener el monitor del ordenador a la derecha de la…
As a Design & Technology technician, we are always looking for ways to improve & also add a new dynamic to our GCSE projects for the students. Working with our main choice of material, 9mm Russian Birch Plywood, we wanted a softer corner…
print x2 halfs in TPU with all walls for each end of arm. remove old crush tube from worn rubber bush and remove old rubber from steel shell of old bush. DO NOT REMOVE STEEL SHELL OF OLD BUSH FROM CONTROL ARM. Remove the rubber, push in…
Taking these tests has become part of life for some people, so I wanted a way to keep the stuff together.
Sorry for the English translation. It is made with the google translator. Puse el soporte original en el lateral de una mesa ikea malm, ya que por funcionalidad, no podía ponerlo ni en la pared, ni en la parte delantera o trasera de la…
A lateral locking mechanism that can be used to lock two components together. The lock and insert have room for round 4x1mm magnets that can keep the lock in the locked position and provide tactile and audible feedback when locking the…
lateral furniture gadgets holder Rafts: No Supports: No Infill: 20% Filament brand: X Filament material: PLA
Reemplazo para tapa lateral del parlante JBL GO2, no encontré la fuente de letra de exacta, puse las mas similar, lo hice en PLA y esta configurado para imprimir boca abajo con las letras en color, impreso en Anycubic Kobra S1. Dejo…
Deutsch: Sie benötigen 5 M10er Pushfittings, wie diese hier, ein wenig Sekundenkleber zum sichern der Magneten und Magneten, wie diese, mit 3 mm Durchmesser. Ich habe mehrere pro Loch (3 Stück, dann steht der letzt etwas über, da ich aber…
This is a remix of my Anycubic Kobra lateral filament guide, so I will add here only the new infos for the Mega, you can find all other infos in the original post. Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No…
A simple support to mount your power supply in a lateral way and optimize the space. You can easily take out the power supply if you need it. Print 2 units to mount a power supply, as is showed in the pics.
Una variación propia estilo voronoi
Equilateral triangle but empty
someone on facebook wanted this so I spent 4 minutes on it... it should print fine with a brim. took me longer to upload than make... internal diameter 80mm outer diameter 86mm so 3mm walls 2 versions one asymmetric with 45 degrees and…
The home covid screening test supplied by the NHS are well packed for putting through a letterbox but not great for storing and removing items quickly & easily or holding the kit whilst you do the test. Basically, they were making a mess…
A stack of prisms where all the non-wall edges are equal.
Este es un soporte lateral para los estantes de vidrio en una Heladera ATMA no-frost (no recuerdo el modelo, sorry) Los estantes están usualmente soportados por perfiles (uno delantero y otro trasero) que se encastran en las guías…
mismo modelo adaptando un USB hembra e interruptor, para poner una luz USB
Simplistic buddy brace for those of you suffering from a MCP Collateral Ligament injury/sprain. 6-8 weeks is a long time to have to tape your fingers together so I whipped up this buddy brace so it could be worn all day. Put both rings on…
Cajas laterales para Prusa MK3S+ sin enganches, de extracción sencilla.
This is the standard Quad. This tool gives learners a tactile way to explore various four-sided shapes and their inherent properties. This tool can expand from a base square of 5cm x 5cm to 10cm x 10cm, and vary in angle. This gives…
Jarrón espiralado con oberturas laterales. Ideal decoració. Impreso en PETG a 240º y 70º la cama. El transparente en PLA a 210 y 60. Escalable al tamaño que quieras. Se puede imprimir con soportes y sin soportes. Impreso tanto en KOBRA 3…
Los carretes que se usan habitualmente son más estrechos que el eje portabobinas. Para evitar que se muevan de un lado para otro he diseñado este accesorio. Es una abrazadera lateral ajustable para el modelo de portabobinas tipo…
Print in pla, with 3 walls and 25% 3d infill. Tree supports are required.
I really like frankyf71 L-Bracket to keep the cabling to the heated bed out of snagging distance of the Y-motor, which I saw quite often with my ender 3 pro. The bracket works on pretty much everything which uses a 2020/4040 or similar…
Son 3 diseños,para algunas placas y la tapadera superior, para solo placas,estas dos primeras son sin apoyo,solo cogidas por los tornillos y solo placas con patas, dejando unos centímetros para poner goma eva o cualquier almohadilla que…
Tapa lateral para baca coche universal
A stack of prisms where all the edges are equal.
Simple box for storing the 3 parts of the Lateral Flow Test Kit. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.3 Infill: 15% Filament: Any PLA Notes: Print time approx 4 hours 20 minutes at 0.3mm…
Created some Quadrilateral shapes for a third grade project. The big ones are approximately 5 inches on the biggest axis. The small ones are roughly 2 inches on the largest axis.
Fregi laterali Panda 4x4 Sisley 100% fedeli agli originali. misure ricavate da fregi originali. ottimizzato per la stampa 3d. i fregi possono essere attaccati alla Panda con del biadesivo forte (tipo VHB) o con del silicone. al momento…
I designed this planter inspired by an online idea, side drainage holes that boost airflow and help the substrate dry out quickly, specially in humid climates. This design minimizes waterlogging, mimicking the natural breathability of…
ESR Meter case with Switch Button and 3 lateral connections. Material needed: https://s.click.aliexpress.com/e/_oDXqTVe - 4mm Banana Panel Socket Test Probe (Remove plastics) https://s.click.aliexpress.com/e/_oFWe2t2 - Mini Boat Rocker…
Materiale filamento in pet-g, estrusione 0,2mm, riempimento 100%, per avere il massimo della resistenza, posizione orizzontale e brim 10mm con ausilio di supporti.
Allows the build plate to be dripped from either side as needed
Mejora de soporte con mayor tolerancia y para tornillo allen
Febrero Guarda un secreto, es un joyero imprimible en 3D con mecanismo de apertura lateral y eje central de guiado. Sus mitades se deslizan hacia los costados para revelar un compartimento interno ideal para anillos, dijes u objetos…
This lateral is for the Toughbuilt Stacktech Compact Tool Box
Diseñamos en thinkercad un soporte modular que se atornilla a la estructura de la core XY Válido para Creality Two trees Tronxi y otras marcas
These are two items to improve an individuals independence with removing and installing thigh laterals on a power wheelchair. The handle should be printed in TPU to allow for flexibility and prevent it from easily breaking. The lateral…
simple pressure clamp design for CNC machines utilizes sliding dovetail for alignment. Attaches directly to CNC bed. The model is the clamp track, Clamp housing, and 3 different profile heads.
Standing at 35mm tall and 40mm wide these realistic model buoys are perfect for cementing your knowledge of buoyage.
Hola, te pasa que pones tu secadora de filamento en un costado y el tuvo ptfe tira la secadora en tu impresora tipo ender con extrusion directa? esta puede ser una solucion! Diseñe este modelo pensando en mi ender 3 y ender 3 v2 neo,…
Outdoor Umbrella lateral arm C lamp - Fermo per Ombrellone a braccio Mod. Texas Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Usar um novo tubo PTFE de acordo com o tamanho necessário !!!
Questo è un design per un porta torcia laterale dedicato agli elmi dei Vigili del Fuoco (VVF). Ideale per fissare una lampada compatibile sulla parte laterale dell'elmo. Mini torcia: https://s.click.aliexpress.com/e/_oEIgAQH Il supporto è…
A simple stand for the test bottle and swab that come in the UK lateral flow test kits; they don't provide anything as standard so you need 4 hands to do a test!
A remix of the original BevelBox by Erik Wrenholt, 35x24x12mm with lateral holes to allow wire to run through Print Settings Printer: DIY Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Flashforge PLA Black Category: Tool…
A very simple little helper…. Most ceiling fans only have a hole in the middle through which the power cable can be inserted. I have therefore constructed an adapter so that the cable can be routed from the side. The four elongated holes…
I wanted to have my filament on the right side so i mirrored it.
I wanted a mount to stick on the side of my desk for Pokka Pens. I added a cutout to fit the clip on fisher space pens as well. I used a small piece of 3M VHB tape to attach it to the desk. Print Settings Rafts: No Supports: No…
3 different arm versions for Sky-Hero Anakin to be able to use all the arm positions. I prefered to print these in PLA its more rigid. It is easier to break but its also cheap to print new ones.
JENO 3.5# O4pro side protection en PETG
I used PETG for the center triangle, and PLA for the others. I found if you print the painted (outside) triangles on their back, you'll get a better result.
ESPAÑOL Descripción del proyecto Placas embellecedoras personalizadas para los laterales de la Yamaha XSR 900. Se instalan fácilmente aprovechando los tornillos originales de las centralitas que hay a cada lado de la moto. El diseño le da…
The pin can be made out of petg or abs, but the bushing needs to be made out of tpu
An equilateral triangle for noobs in every format my software can handle. No attribution needed.
## What is this? A 3D-printable knee model (distal femur, proximal tibia and fibula) with pre-made bone tunnels reproducing the LaPrade technique for anatomic posterolateral corner (PLC) reconstruction. The technique reconstructs the…
This modification allows the filament holder to be mounted on the side, in its original position. I made it a little thinner than the original to prevent the belt from touching the screw.
El sistema ProMod busca generar soluciones de mobiliario flexibles y adaptables a las necesidades de los usuarios por medio de la fabricación de los módulos por los mismos usuarios, requiriendo el uso de herramientas manuales y…
Parametricé el modelo en Solidworks y modifiqué el alojamiento para los imanes a 7x1.5 que eran los que tenía, luego lo imprimí en PLA con boquilla de 0.4, altura de capa 0.2, 4 capas y 15% de relleno.
## What is this? A 3D-printable knee model (distal femur and proximal tibia) with pre-made bone tunnels for combined anterior cruciate ligament (ACL) and anterolateral ligament (ALL) reconstruction. In addition to the ACL tunnels, the…
Extencion lateral de visera de parasol vehiculo. La idea de esto surgio al viajar mucho de noche, y cuando mi pareja usaba la luz del parasol para hacer Mates me molestaba al conducir. Con esto lo que se hace es tapar hacia el lado del…
No supports as it is meant to test overhangs and accuracy. -0.1mm layer height -15% infill (optional)
Embellecedor lateral para tapar agujero en perfil de aluminio de las cortinas ya que el original se pierde con mucha facilidad, tuene un agujero para tornillo M5 para poder fijarlo en el perfil y que no se salga. Impreso en PLA, no…
