Counting matching models…
Subscribe Now! Very good model from LSMiniatures. Remix to no support free and printed. Time-lapse print video : https://youtu.be/MqIaHih9Oy0 Subscribe to find out more support free 4K Time-lapse video: Subscribe Now!…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
There are a lot of heads and scans and flowerpots of Einstein's head going around, but not many where there is a decent upper body that goes with the head. I wanted a bust that was serious, nice looking and of an Einstein that was not too…
Note: I did not make this model. Just reposting it from here . All credit goes to 123one . Use this 3D Printed Cleat set to attach plywood (or almost anything) to the top of a Festool / Tanos T-Loc Systainer creating a mobile work…
Add some whimsy to your desk by promoting your business cards to full scale billboard ads! Prints flat and parts assemble by pushing the pegs through holes or aligning slots. Can print all of the parts individually or as a connected kit…
Print the boat in vase mode, and the sail in regular mode. The sail is one layer thick at 0.2 mm. It is a little tricky to grasp off the print bed just because it is thin. Once you have a corner off the bed, it should come off easier.…
Cable Tie Organizer Box Wall-mounted or stand-up organizer box for storing and organizing cable ties. There are 6 slots with a diameter of 40 mm and a depth of 150 mm, 100 mm and 50 mm. --- Kabelbinder-Ordnungsbox Ordnungsbox als…
1)Läßt sich bei der DM am realistischen mit Shining Silver Filiament drucken. 2) Als Hälften mit der geprägten Seite jeweils zum Drucktisch! 4)Optimale Startschichthoehe 0,28mm bei MK8 Hotend. Läßt sich erstaunlich gut auf…
corbeau albator l'impression de la tête est compliquée, bien choisir le sens selon votre habitude
Printed with PLA on a Sovol Sv06 plus
Hello, meditating Einstein figure. Thanks for your download, enjoy the print!
Für die Montage braucht Ihr einen Kabelbinder (140x3,5mm, 1,2mm dick). Gewinde M20x1,5 braucht keine Nachbearbeitung. Schlüsselweite 30mm Konturen → 3 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Nur für…
Vykrajovátko na sušenky. Jedná se o první model vykrajovátka.
I'm calling this style “ Relief Topography ” Start with dark/black and each change move lighter. 5 colors/ 4 changes total. Link to Collection: https://www.printables.com/social/336804-triple-g-workshop/collections/345687 Quick Guide to…
orientate the same pole towards the marked edge or make your own arrangement. Best to see results with a magnetic field viewer. Cheap on amazon Designed for 10mm square magnets but you can change the scale to match your sizes.
EN - Description Wall decoration inspired by the L-39 Albatros fighter jet. The model is designed as a flat decorative element. It is optimized for 3D printing without the use of supports. The multicolor design is achieved by changing the…
Der hochgeladene Druck erfolgte mit Prusament Neon Green PETG.
This is a scale 1:3.5 side-rudder antenna model (with holes for 2.4 GHz antennas) for the L-39 Albatros. Part 3 provides enough material to sand it to fit it to the profile bulge of the fin. Part 2 is meant to add more stability and…
I cannot find the original model I downloaded - I suspect it has been taken down. I am able to find what look like derivatives of the same or similar model but nothing that looks original (the one I linked to appears to be one of these…
This is a decoy flare launching platform for an L-39 Albatros jet scale 1:3.5. For easy integration into the fuselage it's made of two parts. On the original L-39 Albatros it's mostly installed on the right side of the fuselage at the…
🟪 ▶PLAY For all Ed Sheeran fans, I created a set of 3D printable abstractions to represent his discography. This can be used as a beverage coaster , or just for display . It is square like a CD or vinyl album sleeve. I changed and…
A simple toolbox (155mm) for 3D printing - designed to stand next to the printer and hold all the essentials. The middle compartment is designed to hold vacuum bag air discs, e.g.…
⬜ 🍂 Autumn Variations For all Ed Sheeran fans, I created a set of 3D printable abstractions to represent his discography. This can be used as a beverage coaster , or just for display . It is square like a CD or vinyl album sleeve. I…
Mein Modell ist ein größenverstellbarer Bienenkeil, der auch vollständig Geschlossen werden kann (z.B. für Transport).
Update 2023-09-03: Uploaded additional variant without a drain hole This Bulbasaur Planter will decorate your window sill or sideboard or… every place! Fits: Scale 100%: Every standard 5-6 cm plant pot. Best to plant a succulent or smal…
This model has been nominated for the Printables Awards 2024 in the category 'best 3D Model in Multi-Material Design'. Thank you for your votes! Summary This is a model of a Ford Shelby Mustang GT500 'Eleanor' in a kit / gift card style.…
UPDATE 01/02/24: The top cabinet to pair with it is currently in the design phase. UPDATE 01/12/24: Added 2 new drawer files with tabs removed for a better fit. UPDATE: 01/27/24: Archived drawers with larger tabs. They are still available…
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…
Support me & Buy a T-shirt Sizes All three sizes are fitted for the Original Prusa i3 MK2/2.5/3/4 3D printer. Small size - 245x205x80 mm Medium size - 245x205x150 mm Large size - 245x205x220 mm Only small size is equiped with front…
Try printing at 80% of speed and very hot bed (75° ?) Best R
Support me & Buy a T-shirt Sizes All three sizes are fitted for Original Prusa MINI . Small size - 180x180x80 mm Medium size - 180x180x120 mm Large size - 180x180x180 mm Only small and medium size is equiped with front handle. Medium and…
Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…
Print your own efficient common tools' toolbox for your pegboard wall. Turn your supports off in your slicer, you will not need support for any of the files includes here. Defy gravity with the "levitating" placement of those designs on…
Here are a set of files I made to bring Gridfinity to the new Harbor Freight US General Mini Toolboxes! There are 3 grid base files that will allow you to add your own gridfinity organization to your mini toolboxes you can also split the…
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d Guess who just sprouted into the cutest print of the day? 🌱✨ This little bulbasaur is fresh off the printer and ready to steal hearts! Who else would totally adopt this…
This is an OralB electric toothbrush head protector/case for when travelling, it can stop dirt and other items from touching the head of your toothbrush. Includes air vents to prevent moisture build up inside the case. How to use - place…
Parametric protective case/toolbox with a groove for an optional seal. You can modify width, length, height, corner radius, screw hole size, hinge position, rib and box thickness. Print settings any rigid filament 0.2mm layer height 0.4mm…
This is a bit bigger than the original (see picture 2). I replaced the 3 small drawers with 2 additional big ones. They also got a 3*5 gridfinityframe inside - it will fit gridfinity bins up to 6u, for example. Used the flat covers by…
Intro A compact and practical bit holder designed to be small, strong, and easy to use . This V2 version adds an ergonomic, textured handle and an improved variable bit fitting that grips bits securely while keeping the tool…
Strong crossbow made primarily out of 3D printed parts. This is not a toy. Crossbow had measured 70 lbs of force, but this depends on the amount of tensioning and used PETG strength. BOM and instructions are in the provided pdf assembly…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
I little model of a ragdoll dude, taken from Thingiverse I recommend 110-150% size If you want to print it with multiple colors, you can use the 3mf and print each part individually, attaching the joints halfway through the print.
A hanger combined with a small tray. Two-part design that pressed fit together. No support Needed Print parts one at the time to improve quality. Changes Log: Jan02- Slimmer boat, sail, hook; Print optimization. Jan03- Added a bit more…
I needed to save space and access the filament easily. I created this :-) (easy to print NO raft or support needed) 15% infill should be enough. It mounts on the right side top! Works for both - small and normal 1kg. filament rolls. 𝔗𝔴𝔬…
Introducing The Small ToolBox for the Creality Ender 3. Ever wanted to stuff your 3D Printer's Accessories in one safe and reachable place? Well now you can! Introducing the Small ToolBox for the Creality Ender 3! RECCOMANDATIONS: Print…
17-04-2024: Added double threaded version as someone requested (experimental) Harder to print and needs support(the base files do not) My projects often revolve around solving niche problems i have. I typically use pill organizers for my…
I’ve been wanting one of these extremely rare German made mid-century mantle clocks but they are really difficult to find and when you do find them they go for $1,000 - $2,500. So I decided to try and 3D print a replica. While not…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
Self watering bulb for planters. Just fill it with water and stick in soil. Comes in 100ml, 200ml and 300 ml versions If the bulb is getting empty too soon for your liking, try covering the opening with a bit of soil and then sticking it…
Catamaran Sailboat Kit Card Host a regatta in your pool or bathtub with this fast printing modular toy boat. 11 cm / 4,4 in long (scalable) Printing PETG recommended (for outdoor use) Printed in 1 h on my Bambu A1 / 0.6 nozzle / 0.4 layer…
Update 29.02.24: Grüße geht raus an alle heutigen Geburtstagskinder =)! Danke an @Hanno_1419514 für den Denkanstoß zu der guten Verbesserung die Ventilblöcke einfach unten offen und komplett ohne Infill zu drucken! → (Prusa Slicer) Die…
Variation on Spiral Fidget 👉 Christmas Light Bulb 🎄 This is not as simple a design to print as it might seem. Start printing LampExt.stl first, usually problems arise with this file, the part breaks in the base area. It seems to me that…
Pokemon #001 - Bulbasaur! This & plenty more over on my Patreon~ https://www.patreon.com/noSTLgia
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
These are watering “bulbs”. They can be filled with water and the spikes inserted into soil to keep it hydrated over a longer period of time. They are excellent for plants that need consistently moist soil and are quite easy to print.…
Model on OnShape: https://cad.onshape.com/documents/4e3090b46d9b709aea63f673/v/b97632534c31523e887014c7/e/ff16d7d87dbe54cd935d3aec I printed the model with black PETG. The model needs to be placed at 45 degrees angle to fit. 10% infill…
Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…
For print in parts, choose: bulbasaurPARTS_1 bulbasaurPARTS_2 bulbasaurPARTS_keys bulbasaurPARTS_base For print in full, choose: bulbasaur_FULL Happy printing!
Print him on his back or as is with a ton of supports. Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here:…
UPDATE V1.1 I added fit testers. Modular drawers with infinite combinations make what you want like pixel art! So be creative and enjoy :D
Hilbert Curves https://en.wikipedia.org/wiki/Hilbert_curve are funny and convoluted curves that (on their ideal and final configuration) fill the space. Brains and guts and other biological tissues are similar (they tend to maximize…
A decorative sailing boat model which can be printed without supports. Prints in two parts and slots together, comes with a stand. For the sail print at 0.3mm layer height. I have also included a smaller version that will fit on the Prusa…
This model is a continuation of my Desktop Mini Tool Box project. There are multiple variations I have created for your favorite drawer configuration. Current configurations: 4 Drawer (2 full, 2 half size) Possible Upcoming…
idkFord Mustang Shelby GT500
There are basically only 3 print processes: the body, the tires, and the finer details. I printed everything except for the tires and the body in gray , some were painted red if necessary. All gray parts were printed with 0.2 nozzle and…
Yet another toolbox for MK3. I didn't want tools hang on side of printer, so designed one what sits on top of PSU. Same size (footprint) as new, black, PSU. There is also add-on for taller items. It must be glued on. Print instructions…
Simple cable ties to print yourself. Created for the last meter contest on Printables.com. The cable ties are surprisingly stable and also flexible enough when printed with PLA, but you should switch to PETG or TPU if you want to put a…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Modular Pedalboard This model allows you to print your own modular pedalboard. It is modular because you can add extra lengths of pedal board in the sideward direction, adding 20cm (or 22cm) each time. The Pedalboard in the picture is…
This festive decoration combines a modern design with classic holiday charm. Inside the bulb-shaped structure is a stylized spiral Christmas tree with a star on top, surrounded by several smaller trees. When lit from below using an…
Required hardware: 1x Cherry MX switch or compatible alternative, bonus points for clicky Assembly instructions: Print both parts Insert the switch into the main body When connecting the plant/back to the switch, be very careful to align…
für 25 Teebeutel leicht zu drucken minimalistisches Design Sichtfenster Teebeutel organiseren
A Striped Bulb Vase, designed to be printed in vase mode. Size: 105 x 200 mm (100% scale) Print time: 3 -5 hours Weight: 40 grams Happy printing Non-commercial use only. Print instructions 0.25mm layer height 0.6mm layer width 45mm/sec…
There are two versions with different hole sizes. The smaller hole size is easier for printing. No supports are required for either version. Suitable for my Anycubic Kobra 3 filament waste diverter…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
english First of all: I appreciate every like and every rating. A small box with a hinged lid. It is suitable for medium sizes. As in my small box (…
Original part : https://www.thingiverse.com/thing:4625886/files
I designed this for my specific toolbox drawer (US General 44" top chest), and the specific pliers I own. It probably won't be perfect for you unless you happen to own exactly the same stuff. But I am sharing it anyways, because some…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
Disclaimer: If your printer isn't calibrated correctly, don't blame the design when the integral supports stick too tight. Use the version without integral supports and generate your own. You won't have as nice a surface finish on the…
This is an open-source Plastic Antweight combat robot, intended for the SCAR component kits available from Turnabot and Team Malice. This and other community designs can also be found on the Team Malice website . It placed 4th overall at…
After watching my XL print, i noticed a bad behavior that could only be solved by a new part. I really think this is a must have part. I get that prusa(as every other manufacturer) want to have as short as a part list as possible.But this…
AnkerMake M5 toolbox and storage. Top part is the actual AnkerMake original toolset. Suggested printer settings: perimeters (walls): at least 3 with 0.4 nozzle layer height: 0.2 top/bottom layers: 4-5 infill: at least 15% ironing: it…
Interested in selling physical prints of my designs? Want to access a growing library of exclusive 3D models? 🚀 Unlock exclusive benefits and premium access with my membership. Membership: Exclusive models + Commercial License ---…
Meet Toolboxfinity — where Gridfinity meets garage toughness . These stackable, toolbox-style drawers lock together for unlimited height and unbeatable durability. With deep storage bins that stay put when you move or bump your setup,…
Summary This is a model of a Shelby AC Cobra 427 in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car…
awesome Owlbear miniature The base features holes for magnets
This is a toolbox for the Anycubic Kobra / Kobra 2 / Kobra 2 Pro 3D printer, which is mounted in the touchscreen area. Print the toolbox in vertical position. Print the inside component in orizontal position. You can check my other…
The "Keycap featuring a Low Poly Bulbasaur" is the perfect addition for all Pokémon fans. With its intricate design and attention to detail, this keycap will bring a touch of nostalgia to your keyboard. To achieve the best results with…
A simple to print and detailed model of a small 1980's sailboat The “Oceaan 18" was made by K+S Polyboats in the netherlands. It's a small, sporty sailboat with a cabin big enough for 3 people. It's an inland vessel and not made for rough…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here is a 3-Way Elbow designed to…
Introducing The Large ToolBox for the Creality Ender 3. Ever wanted to stuff all of your 3D Printer's Accessories in one safe and reachable place? Well now you can! Introducing the Large ToolBox for the Creality Ender 3! Since this…
IMPORTANT: This model isn’t its best version. For the best experience and best result this is the one you should 3d print: https://www.printables.com/model/740344 or this: https://www.printables.com/model/730266 This is a toolbox for the…
This Pokémon plant-pot has a lot of 3D surface detail and will decorate your window sill or sideboard or… every place! Updated Version: STL #2 is modified with an optional drain hole. Still I'm marking this as a reupload since changes…
Organizer for drillbits for IKEA SKADIS board. Three sizes of holders available for most common drill bit sizes. FreeCAD files provided as well, if You need adjustments for different drillbit sizes. Each holder needs 2 hooks to hold on…
Albert Einstein Headphone Stand - Support Free The original Albert Einstein Bust model by ljc_designs is a masterpiece, and the support free design by @iczfirz makes it even easier to print. Using Fusion 360 I was able to reduce the mesh…
Ikea skadis Storage box for Zip Ties / Kabelbinder. Box inner-height: 12cm, 15cm, 18cm, 20cm On the pictures you can see Version 1. Version 2 comes with rounder edges to improve stability. I printed mine with a 0.6 nozzle and 0.4 Layer…
Tested for durability on 20+ bikes Share your makes! Works with stock bolts Tested and tried on 20+ bikes Will work on erides and LBX Chain or Belt drive I recommend you print out of PETG and a very high infill, 100 percent is best
