46 models
This is a 3D printable LED strip holder for a led strip that is controllable with an app. In my example, I'm using an SK68612 RGB WW (warm white) LED strip with a LED controller from AliExpress. You can customize the height depending on…
It 's a remix with wider socket for WS2812B led strip. All parts and dimensions are the same like in original project.
I made a housing for the Philips Hue LED strip, because it is originally glued, but this came loose after some time. That's why I decided to design a housing to screw the control unit on, so you don't need adhesive strips anymore. You can…
Fast and easy print. For LEDs with diameter other than Ø4.5mm scale the basic model up or down. (you need to scale X and Y simulatiously, Z can be scaled as wished). Print in PLA or PETG in vase mode and for maximum effect with clear…
Needed a ledstrip mount, found some on internet. They where all a bit meh. So made my own. They work pretty good, you can even clip cables under them. I was not sure about the orientation of the print, made some sidewalls to hold the…
ledstrip soldering help for 3 pin leds, i mad it for my digital leds. its for led strips with a width of 12mm. Category: Electronics
It's necessary to take the front panel off the printer, but the upgrade is worth while. I printed the support in ABS.
Holds 12,25mm wide RGB led strips, clips right into the extrusion, needs 4 per side.
This is a remix of the original model provided by Printornaut, but is intended for 12.5mm strips. Particularly a model sold by a well-known german DIY-store that works on 24Volt and has 16.7mm segments to work with. The three files…
Maximum effect with minimum material. Slide them over existing LEDs. For LEDs with diameter other than 3 or 4.5mm scale the basic models up or down. Print in PLA or PETG in vase mode and for maximum effect with clear filament.. Average…
If you have a lid riser and want to improve the ilumination of your k1, the easiest way is just stick the ledstrip on the wall of the lid riser, but this bring a problem! If you need to do a maintenance isnt possible to remove as…
Mount your led strips on a 90 degree angle to get awesome ambient lighting.
this is an holder to hold a ladstrip in a IKEA Lack enclosure.
I got this 3 mm thick 24v ledstrip so I designed this small contraption to mount it to the frame.
ledstrip clips to mount Ikea MITTLED in Ikea BROR metal storage cabinet post. Print using PETG filament. After printing, first click into mittled, then place assembly in a inner corner of BROR steel post. First clip in bottom. Top clip…
Print with your favorite filament. No supports.
Fast and easy print. Nice to use in the tree or as table decoration as alternative to candles. Blue or white leds will be the most realistic. Beautifull refraction of the led lights viewing them from different angles. For LEDs with…
Simple Led strip refractor used to light up my buildplate
Do not hesitate to ask for different lengths if the ones already uploaded do not suit your project! I was looking for a rail to mount a led light strip on, so it would light up the wall, but not blind me. I could not find exactly what I…
Mounting to attach your LED remote on a wall or furniture. I always didn't know where i put it. Now it has it's palce
I took the clip from thing:4636337 and the ledstip holder from thing:225216 and combined them to create this 18cm led strip clip-on for a 2020 frame I made this using TinkerCad, and adjusted it so that it can be printed upright without…
Just a basic Lamp.I couldn't find anything that fits my needs around. Print instructions Category: Model Furniture Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: Doesn't Matter Supports: Yes Resolution: .15-.2 Infill: 10-20%…
Hello everyone! I'm glad to present my first creation of pot series. A modern pot retroilluminated with ledstrip inside! Inside the pot, at top of perimeters, there is a guide for install a ledstrip for light your plant inside the pot.…
I did this with what I had at home This is the first version diy led strip holder for M365 pro2 need: HARDWARE: bl-5j battery Wire,solder..... led strip (5m-60-ip67) :…
Simple mounts to use an aluminium profile as a ledstrip bar on a Skadis board. little bit of support needed for the Skadis hook when you print it lying down on its side. I printed it in PLA. Works fine since the aluminium profile…
You can customize to a certain extent, the type of ledstrip profile is an aluminium one with an indent on the side, in which the model grips the profile. Using two (or maybe more) prints of this model (in PLA or whatever), which you can…
LED fixture holder designed to mount directly onto the back of a desk. It positions the light fixture upward, creating a wall-washer effect that enhances ambient illumination. Also the gap allows cable routing without affecting light…
A quick fix for a ledstrip over your workspace. You can use the original screw.
Hello, I present a model of a simple profile for LED strips, this panel holds two strips. 1- ARGB TAPE 10MM 2- COB TAPE 3MM I CREATED THIS PROFILE BECAUSE OF THE GAP BETWEEN THE DRAWERS (INTERMEDIATE GAP) WITH THE THINK OF INSTALLING THE…
2020 aluminium ledstrip channel mount. This is remodeled according to existing part.
Led mounting bracket for the prusa mk3 series Led strips rigid 12v 5730 led strips pair of 3 breakaway strip Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: custom PETG grey…
So my wide got this cheap LED strip to light up the stairs to the attic, but they game with double sided tape ( cheap of course). After reattaching the tape for the third time I had enough and spend a few lost moments on tinkercad to make…
Extended version of mount by Blinkii removed the "stop" to allow the mount to sit "in the middle" of the led strips extended the mount, 4 lengths; +16, +37, +58 and +100mm This is actually a remake of a mount I created (by remixing the…
LED strip light installation . The LED strip is attached using custom 3D-printed LED strip holders . These holders securely fasten the LED strip to the surface, keeping it neatly aligned and preventing it from peeling off over time. The…
Just a quick design, for a BambuLab A1 Mini LED Light Bar Mod. Other mods mount the strip in the front or directly on the vertical rail, but I wanted to mount the LEDstrip on the back of the vertical rail with a slight forward angle. The…
Two part system that easily fits together. Work best with 1 m long LED strip. I recommend to use IKEA product VATTENSTEN ( white one, it can be plugged in to usb) or KABBLEKA (3 m long, can be cut for shorter length. Plus it can also…
Introduction The motherboard I have does not come with an integrated addressable RGB LED (RGBA) controller, and I wanted one that I could control from the PC directly off of a spare USB header on the motherboard. My natural choice was…
This is a u-coupler to electrically connect the 3 strips of Ledberg to a single light source. This is designed specifically to be used with https://www.thingiverse.com/thing:4729201 Originally created in OpenSCAD (before I discovered…
i needed supports to attach IP 65 ledstrip on instruments for our bateria (batucada) so i design those clips that allow quick mount for rgbw ledstrip. I can update the modele to fit more ledstrip
We needed a holder for an Action Led strip to fit on a small boat. We made it so the bottom will fit a USB type connector and the top will hold the led bar.
Introduction The motherboard I have does not come with an integrated addressable RGB LED (RGBA) controller, and I wanted one that I could control from the PC directly off of a spare USB header on the motherboard. My natural choice was…
i needed supports to attach IP 65 ledstrip on instruments for our bateria (batucada) so i design those clips that allow quick mount for rgbw ledstrip. I can update the modele to fit more ledstrip
Two part system that easily fits together. Work best with 1 m long LED strip. I recommend to use IKEA product VATTENSTEN ( white one, it can be plugged in to usb) or KABBLEKA (3 m long, can be cut for shorter length. Plus it can also…
Holds 12,25mm wide RGB led strips, clips right into the extrusion, needs 4 per side.
