Counting matching models…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
The original file that I remixed is this , I have added new features to test. I added new things to test like stringing test and the write on the bottom. You can also test a lot of other things: bridging bed level stringing calibration…
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
Design reference rules, it is specially useful while modeling and taking measurements of real world objects. They are designed to fit inside Digital Calipers Case. You might also like these:…
DungeonStick Church or Cathedral setup. Fast prints without support. Round DungeonStick connection for maximum flexibility. Easy storage Use the included couplers to create a symmetrical build. Functional doors (print in place). Give them…
UPDATE: Please print the Updated stl file since some slicers have issues printing the top circle. :)
Simple toilet paper roll holder with a phone shelf that uses a separate mounting bracket to hide the screws. Designed with optimal layer orientation for 3D printing to ensure the roll holder part is less likely to snap off (layer lines…
This is a skeleton model that I designed for my wife. It is designed to fit on a skewer stick, so that it can be put into a flower pot, or vase. I have also included a couple of different length stems that you can print, but a wooden…
Finally, this 3D printed skeleton cat is available! 🐱💀 Composed entirely of 3D printed parts (head, body, and spring), you can use glow-in-the-dark filament for an even more stunning effect. Printed with Bambulab P1S. 🌟 Assembly…
Inlet tiles for GraviTrax to catch falling balls. Two types of height - 20 and 25mm available. By adjusting the direction of the tiles I place on top, I can create a 20mm or 25mm drop and change the direction of movement as I wish. This…
Amazon shipped a small water pump for a fountain with no nozzle to connect the hose to, printed this one to replace it, maybe you need a replacement too. Should work with any pump that has a 13mm inner diamater outlet to connect to an 8mm…
Wanted an easy-to-reach place to hold some pens and a favorite knife. Used Tinkercad to join the models and edit the pieces.
I printed the ex bcar and was satisfied about the performance but the collet was kinda fragile, so I made this.
Remix of Crummjys's Chunky Tablet Stand (Laser Cut). Works with tablets and phones.
My wife asked me for a bracelet holder. So I designed this one. Unfortunatly my white went empty, so it has 2 colors on the picture now. It's easy to print with some support material for the holder itself. I printed it with 15% Grid…
Konečně může vaše tiskárna Bamboo jít důstojně na záchod. Konečně může důstojně pálit kadidlo. Nečekejte a tiskněte
Hallo, ich habe hier eine Mischpalette in Fusion gemacht. Die Palette hat verschiedene Aussparungen. Sie ist robust und leicht zu reinigen geeignet für alle Nasslackiertechniken. Bestens geeignet für ambitionierte Hobbymaler bis hin zu…
Modelo iluminado con el nombre Jan. Està formado por dos piezas, se imprime sin soportes, tolerancia para que encajen 0,5 mm. Cabe en la base de l'sidewinder X2. No se si se puede escalar y que sigan encajando. El difusor blanco solo…
Print per original model instructions. I recommend 3 walls with a 0.4mm nozzle for the frame.
Instructions can be found in the folder of this project (Other Files). Versions of the wallet: mini Wallet - V1.1 sprintech.net Happy printing If you like what I do, you can Buymeacoffee :-)
Case for magnetic sunglasses from owndays snap series, with elastic band slot, fits over a sony xperia 10 iv wallet, Requires: 4 * m2x16 bolt 4 * m2 nuts felt/soft material to line case 150mm * 20mm elastic loop (I used 300 mm * 20mm and…
I remixed the great design made by @AndreasJade_261770 to print it from PLA in one piece using support material at the interface. Printed it standing up in about 5 hours on my Bambu Lab P1S.
The top backrest mount of my chair broke, I think the design is flawed. This part replaces the original mount and moves the backrest a little further back so that it rests on the “spine”. Print with 100% infil, doesn't really matter what…
The "Alphabet Rolling Pins" set consists of two 3D-printed rolling pins—one with uppercase letters and one with lowercase letters. Students roll these pins over a flattened piece of playdough they’ve prepared themselves, imprinting the…
The "Letter Marble Run" is designed to aid in the formation of uppercase letters. It consists of hexagonal building blocks that, when assembled correctly, create a letter shape. Students can trace the letter with their fingers or guide a…
The "Letter Train" is a playful tool designed to support early literacy skills. The set includes a locomotive, which acts as the engine for a word train, and multiple wagons that can be connected using a simple plug-in system. Each wagon…
The "Uppercase and Lowercase Letter Matching Puzzle" consists of 3D-printed puzzle pieces with raised letters, making them both visually and tactilely engaging. It is recommended to print the letters in a different color for clearer…
Key, wallet, phone reminder sign. Place it and get reminded to bring your keys, wallet and phone
This plate can you helps with preparation on beads bracelet Pomůcka na výrobu korálkových náramků
Modern toilet roll holder with hidden base. Print in PLA or PETG Print Settings Arm - 50% infill - 0.2mm Mounting Plate - 100% infill - make this part solid Base - 20% infil, 0.2mm, I did set the my perimeter setting from 2 → 5 to make…
English: This is a custom-designed cookie cutter in the shape of a number "1" with the word "One" written across it, ideal for first birthday celebrations. It stands at 10 cm tall (scalable) and comes with two parts: one for cutting the…
These are 2007-2018 Wrangler JK tire carrier delete plugs. I designed it to fill the holes and to be really snug. Just print it upside down. I printed it with standard settings with PLA, but i think PETG will be better…
2007-2018 Wrangler JK license plate delete plug. I have made 3 types: Plaint with no text, Rubicon and Recon versions. Let me know if you need something else. The font is not the exact jeep wrangler font, but its very very close. You can…
I hope to attract swallows this Spring. Painted on organic supports for slot. Consider a brim. 4 x M3 heat sets into house top. Roof attaches with 4 x M3x8 SHCS. 2 x #9 screws to attach house.
Stampato in PETG con un riempimento maggiore dell'originale
Phone/tablet stand with slot for charging cable. I printed it in PLA with 5% infill, no support needed.
Summary This is a model of a Chevrolet Camaro RS/SS (1967) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned,…
This is the full documentation for building a tractor with the PolyBriX construction kit. This project only provides the STLs with all the required parts and the detailed assembly instructions. The individual parts can be downloaded form…
An improved version of my G2 pen which can be found here: https://www.printables.com/model/491413-pen-pilot-g2-gel-capped The edges were widened to reduce the need for a brim The clip was shortened to make it more robust. Tolerences…
Blocking air from the auxiliary cooling fan and adding outlet on the front. To prevent nozzle clogging when using the auxilary part cooling fan. Print at least in PETG. ABS or ASA is recommended. You'll also need some round magnets…
Purpose Introducing a unique toilet-shaped charging stand with a lid, designed for Apple Watch and mobile phones. This model features two versions. Version 1 is intended for Apple Watch only, while Version 2 is combined and allows…
With this insert you turn your Bohning’s Multi-Fletcher® Jig into a tri-liner for vanes like Spin Wings™, Kurly Vanes™, etc.... It can be used for different Vane lengths. With the centimeter marking you can achieve a exact positioning of…
The original Ballet Dancer 02 is created and kindly released to Internet by “mytanas” it was hard to print for me. TheNit released a remix of the figure in two parts. Grand job! Original: https://www.thingiverse.com/thing:1819299 Remix by…
Tvman Head for dummy 13 v1.0 (Beta) The size corresponds to a dummy 13 scaled to 120%
This wet palette is designed to help miniature and model painters keep their paints wet longer, making color blending and detailed painting easier.
Zatím bez interiéru. Davidův článek o tisku: https://drracer.eu/3dp/20190922_johnny/index.html EN: DRracers article about printing: https://drracer.eu/3dp/20190922_johnny/index.html
Kleinere Basis für die Halterung von https://www.printables.com/@Martinhensge_1708943
inspired by mech from the game called "G-NOME" the figure is 40mm height one model is with base, second model is baseless If you liked G-NOME or Mechs, follow me because more HAWCs are coming 0.08mm layer height
Update : The TPU gasket finally failed last week. (mid Jan 2026). So I got a good year's use out of about 30 cents worth of TPU :D Ongoing saga of dealing with this toilet that came with the house. Nothing steams me more than paying like…
Third Update: Changed the gem a third time to something a bit more accurate Adjusted the peg sizes again Made the hilt shorter
Cheek rest that can extend 15mm higher than the original and still goes all the way down. Print and use the same as the original. Update: Added one extended by 30mm from the original as the 15mm was barely tall enough.
Cortador de galletas con diseño de navidad, son dos piezas cortador y marcador se imprime junto. Para no perder detalles marcar opcion aracne.
Cortador de galletas con diseño de navidad, son dos piezas cortador y marcador se imprime junto. Para no perder detalles marcar opcion aracne.
The attached STL files have been generated with MachineBlocks Online Brick STL Generator which you can run directly in your browser without installation. This allows you to create all kinds of LEGO® compatible bricks in different sizes…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Print Duration: 1h 45m 2s Dimensions: a. Model Dimensions Slot Height: 18.8mm Top…
Compatible with following cat litter: http://www.kitter.com.au/ https://www.budgetpetproducts.com.au/product/kitter-wood-pellet-cat-litter-15kg/6014
Starts at just 18 grams each at 100% scale! Scale up if needed! Great for paint parties and crafts. Flower shape with 17 compartments. Anti-spill brim included. 125% Scale shown below - 48 grams - Bambu MINI Matte white PLA Think I'm…
This is nintendo (26) game card holder that spins, it's sort of like a roulette of choosing what game you play.
Optimised for FDM printing with top flat on build plate. Compatible with 8x2mm magnets. Sizes Include: ROUND / STANDARD : 25mm 28mm 32mm 40mm 50mm 65mm 80mm 90mm 100mm 130mm 160mm LONG / VEHICLES / MOUNTS : 25 x 70mm 32 x 80mm 40 x 95mm
Print the mesh flat and then use heat (heatgun/hairdryer) to carefully wrap it around your wrist. I have posted 2 sizes of mesh depending on how big your wrists are. The rune stone fits into both. I painted mine with acrylic paint AFTER…
TPU Voronoi Bracelet Add a unique, modern accessory to your collection with this flexible Voronoi-style bracelet, designed specifically for TPU filament. The lightweight lattice pattern provides excellent flexibility while creating a…
A funnel and stand for the original Bialetti Mokka Express to fill the basket with ease. Both peaces fit into the Bialetti when its not in use.
Key Features: Broad Compatibility: Four versions available for brush diameters of 75mm, 80mm, 85mm, and 90mm, fitting a range of brands including IKEA brushes. Integrated Roll Holder: Fits standard toilet paper rolls with a 16mm diameter…
Print Details: 3D Printer: Creality K1C Print Material: Hyper PLA Print Settings: Standard 0.4mm nozzle with default settings. Print Support Required: Yes Recommended Print Support Type: Tree Print Duration: 1h 40m Additional parts…
Some of the multi plug outlets do not have a recessed back and leave an unsightly gap when installed and this spacer is a simple solution to fill that gap. This spacer was made to work with a OneBeat multi plug outlet that I picked up on…
Install it with the side with the thicker “wall” on the right side of the blaster
Small box of 50 pieces of air gun pellets with cover. The perfect box for match pellets. Printing without support. You should turn the model flat side up.
Holder for a cheap wet palette. Print the second one mirrored for added symmetry :)
This tablet holder was designed for my old Lenovo Tab S8, a 10+ year-old testing device. It features a convenient hole for cable management and vents to ensure proper airflow. The holder is highly stable and capable of supporting larger…
I wanted to bring new life into a Outdoor Christmas Wreath I had. So I created this clip to allow for the replacement of dumb lights that it came with to be powered by WLED.
Modelled these to fit on the cheap chronograph that you can get on Aliexpress (see screenshot). They are replacing the standard plates. I used new M2,5x5mm screws but I think you can also use the original screws with some minor adaptions.…
A Simple Magnetic Frige Holder for the OT6 Tablet it uses 12mm x 5mm Magents for Strong Holding Source Model can be found here:…
This 3D model of the "E" letter keychain is crafted with precision, offering a stylish and practical accessory for everyday use. The sleek and versatile design is ideal for personal use or as a meaningful gift. Key Features: Modern Design…
skeleton Festool battery wall mount leyer hight 0.20mm infill 15%
Link two tablet supports to have a single one in the center, so the kids or passengers can watch the same shows. Can be used between the back or front seats. It's only compatible with supports that use a swivel ball joint. Files are…
Panda toilet paper roll holder is inspired by the toilet sheep! I was asked if there was a toilet panda so I started to construct with plasticity 3d. The image of the panda's face was generated by AI. It was printed with layer height 0.2…
GEN2 185 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 185 is the STANDARD depth (about 171 mm inside), sized for everyday storage. GEN2 was originally built to mount under a desk · this…
Gedacht zum Transportieren von Medikamenten oder Lagerung Auf Reisen. Ich persönlich habe die Lücken mit Epoxidharz gefüllen
Bullets engraved with deny, defend, depose for pnzr's G26 shell ejecting blowback replica
Remix of Draizer's shelf holder for 2020 extrusion. Instead of being inset into the 2020 frame, my board sits above the 2020 frame. This extends Draizer's design up to flush with the frame which allows 1 ¼-1 ½" screws to connect with the…
