Counting matching models…
I printed these in TPU but any weather and sun resistant filament will work. Can be used with or without a pull cord Print Settings Printer Brand: VORON Printer: Doomcube Supports: No Walls 5 Infill: 25% Resolution: .25 Filament: TPU,…
I printed these in TPU but any weather and sun resistant filament will work. Can be used with or without a pull cord Print Settings Printer Brand: VORON Printer: Doomcube Supports: No Walls 5 Infill: 25% Resolution: .25 Filament: TPU,…
This printed exactly as shown, no supports, using a 0.6mm nozzle. It is an easy press fit into the hollow leg of a Lifetime folding chair, because for some reason those feet go missing.
The original model has been working great all summer if you want to replace the original clip. I've been frustrated with the 2 part clip on these kayaks so I modeled another clip that ties directly to the strap. The strap needs to start…
I have a Lifetime Tamarack 100. I was adjusting my seat on the river and this clip popped off, never to be seen again. I found the model by Hparsonst and gave it a try. It was a little thinner than my original and didn't clip on securely.…
This chalk holder has been a project in the making for around 4 years. I’ve tested numerous designs to address the issues I found in commercial chalk holders and aimed to create a truly universal holder compatible with all types of chalk.…
Organize your shed with this versatile hook made to fit Lifetime sheds only. Featuring a traditional hook style, this wall-mounted hook is perfect for hanging items such as shed tools, hats. Made from durable plastic, this hook is built…
For setting up a space saving table for an extra workspace.
To quickly space and square up these lifetime steel posts I created this jig. Clamp to any board cut one inch shorter than the spacing you want between the boards. I use clamps so you don't get the jig stuck between them once they are…
This 3D model is a specially designed hook attachment for a Lifetime® Tool Shed. It is sturdy and extremely durable and made to hold many tools safely. The hook can be easily attached to the shed wall slots, helping to keep tools…
Tried a number of other designs with no success - glass tables have a different size than the lifetime picnic tables. Print solid with supports enabled for the locking teeth. I used 100% infill with 4 perimeters in PETG.
Our kiddie-sized Lifetime Wave kayaks have a drain hole drilled in the bow on the upper deck, and we've lost the plugs. The kayak hull filled with water after just a couple hours goofing around on the lake. I'm assuming the open hole on…
I wanted a vent for my lifetime resin shed. I found quite a few options online, but most were overkill or required a large power source. I designed this plenum to attach to one of the existing gable vents to vent hot air and fumes out of…
Replace a lost or broken spacer ring with this printed one. Printed in PETG. The OEM rings have holes to lock the tumblers position. This one does not have those holes and was swapped with one from the center.
This printed exactly as shown, no supports, using a 0.6mm nozzle. It is an easy press fit into the hollow leg of a Lifetime folding chair, because for some reason those feet go missing.
Replacement feet for the front and back feet for the folding Lifetime chairs. Seems like these chairs are normally a Costco purchase. There are other feet available here, but they lacked some of the features. Step files also included.…
Extended the arms on the Lifetime Tool Hook from @sentinel23, to hold larger items. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: AMZ ABS Notes: Like the original it…
Blocks for clamping things onto the edge of the Lifetime folding table range. There are two shapes that match the contours of the table edge shapes as pictured.
I acquired a neat looking old piece of 80s vintage Sony hardware from a garage sale; a Sony Digimatic Lifetime TFM-C770W flip clock radio! However, mine was missing the special two-piece time/alarm/tune adjust knob. Using the radio tuning…
This is a replacement leg clip for a Lifetime folding table because they tend to snap off. Print with at least 3-5 walls for strength. I also recommend printing it with something stronger than PLA like PLA+, PETG, or ABS. To replace it,…
Replacement proprietary nuts for Lifetime brand 80 gallon compost tumbler. https://www.lifetime.com/lifetime-60058-80-gallon-composter-tumbler Design changes: the OEM ones are sealed on one end, but I made mine open on both ends so that…
This is a clip designed for the seat strap of a Lifetime Kayak. It is the matching part for this half of the clip. Category: Sport & Outdoors
This is for the lifetime plastic 4'x2' tables sold at Costco. The table height is for about 52 mm or 2 inches. Cable management is attached to the side of the table. It is more of a snug fit on the long side of the table than the short…
Needed a replacement drain plug, this fits the bill. If you want to use the screw which holds in the plug, either drill a small hole or edit the stl to add one. This will need a hammer/mallet to insert, but can be pulled back out by hand
Easy print in place - no support needed.
Foot for end of horizontal leg tube of Lifetime folding tables. Leg tube is approximately 20mm x 35mm. I printed in flexible PLA, and fits on well when secured with stock screw through table leg. There's a hole in printed piece that…
This is an adaptation of my Milwaukee M18 Quik-Lok holder that I sized up to fit the larger shaft diameter of most of my garden tools such as shovels, rakes and other yard tools. It will fit any tool with a handle diameter that is close…
A hanging tool bracket for the 4 foot Lifetime picnic table. I made this for a dust pan with a hole diameter of 8mm.
Was frustrated for a long time as the mount for our Lifetime Kayak wouldn't hold the seat in place. When at the store yesterday looking at a new Kayak, discovered we were missing a clip. While this clip is not as fancy as the original,…
the lifetime brand yard cart wheelbarrow has a dump feature that releases too easily and when unexpected I used M5 bolts but M4 might fit better, or similar sized american units, a specific bolt size isn't critical flip the stl to get…
6in from top of flange to inside of spherical end. Mirror for use on both sides. Print only the flange section to serve as a template for cutting. Installed with silicone and 3/16in long grip blind rivets.…
Designed for the Lifetime Tamarack Angler 100. Model: 90818 but will work with many Lifetime kayaks. Many Lifetime kayaks have two swivels to prevent the rear of the fold-up seat from reclining backward too far. This is a terrible, but…
A replacement seat clip for the Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) A more flexible material than PLA is recommended. This part can be printed with PLA (as seen in the provided photos). It will fit and work, but it is a bit…
My church has a bunch of 6 foot Lifetime folding tables to use for events. However, over the years some of the handles have snapped off. This model is a replacement for those handles, and uses the original bolts and nuts to secure them.…
I purchased several Lifetime Brand tables with folding legs from a local big box store. They're great except the clips that hold the legs in storage position break easily. Replacement clips for Model LPPRMB 5008 with the product ID…
A replacement seat clip and hook for Lifetime Kuna 100 Sit-On-Top Kayak (Model #91054) These also fix the problem that some of my clip/hook pairs had where the hook wasn't tight enough to securely keep them together.
This fits all the lifetime kayaks. print using TPU and 100 % infill along with 2-3 walls
I created this bracket for my Lifetime Teton Pro's rod holders after getting the idea from a fellow kayak owner on a FB group. This is meant to reorient your rods so that they are inline with the kayak rather than sticking out…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Fits a Lifetime table model 80256. May fit others. Check your table clip measurements against the model in Tinkercad before printing. Designed to be…
This is a set of seat risers for the Lifetime Teton Pro Angler 116 Kayak. They were designed to fit onto the existing seat mounts for the kayak but may require a little sanding to fit. This is a V1 so it may not be perfect but I have…
Hook to let you to hang custom things as wood panel. Simply screw at the back of the panel
Slips over the ends of the rear seat bar and adds about an inch to the height of the seat in the rear. Should be printed with PETG or another filament that's durable in full sunlight. I used 50% infill and the strength has been fine.
I made a simple phone holder so I can watch shows while at gym without having to look down all the time. This holder fits the screen of TechnoGym treadmills (typically at LifeTime Fitness) and holds my iPhone 16 Pro in Apple leather case.…
This is an umbrella hole cover for the Lifetime 6-foot Folding Picnic Table. It has a flat surface so water will not pool. It can be printed without support and fits snug to the hole. Please check the photos to make sure you have the same…
This clip will replace the clip that holds the 2 halves of the Lifetime folding benches Model # 80309. The original part is ABS, I printed the replacement in ASA because that is what I have. PETG would probably work too but you can let me…
After a recent party, a few of my Lifetime outdoor tables had their retaining clips broken. I was able to print replacements for the larger tables, but no designs existed yet for the Kid's picnic table. So, I took it upon myself to design…
a cheap bucket adapter for lifetime kayak with rope dry hull you use a 2.5 q bucket from lowes. i would recommend double sided taeping the adapter to the kayak to make it not fall out. how it works: this is a bucket dear god there is more…
I printed this in PETG with: 0.16mm High Quality 50% Sparse infill 50% Infill/Wall
