30,848 models
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
Print approx. €11.95–€14.61 excl. taxPreliminary estimate for one variant
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…
Print approx. €7.18–€8.77 excl. taxPreliminary estimate for one variant
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree with stars with separated LED tea light holder trunk. 2 stl are provided for the trees : one for vase mode and one for normal mode printing. The vase mode is easier and faster to print (on the right on the pictures -…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Elevate your Halloween ambiance with our 3D Printed Cauldron Tea Light Holder. This enchanting, meticulously designed piece adds a touch of spooky elegance to your décor. Illuminate your Halloween festivities in style with this bewitching…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Wrist brace (splint) - a lighter version A lighter and less rigid brace, suitable rather for relieving pain caused by a sprained wrist or post-surgery recovery. Not suitable for fractures. Use undercast padding, fixated with velcro straps…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
there is a better model!!! V4 link I designed this container for the holidays near the pool to keep my cigarettes dry. Print this without support and with a layer height of 0.2 to keep the threads nice. Update 15-aug-22: For easy printing…
Print approx. €4.19–€5.12 excl. taxPreliminary estimate for one variant
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant
TL;DR A little fast printable moon lamp cover to put over a cheap LED-Tea-Light. Mentioned on YouTube: Many thanks to Chris for presenting the model in his nice channel. More stuff for IKEA moon fans:…
Print approx. €2.69–€3.29 excl. taxPreliminary estimate for one variant
Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…
Print approx. €5.15–€6.30 excl. taxPreliminary estimate for one variant
Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…
Print approx. €4.23–€5.17 excl. taxPreliminary estimate for one variant
This two part lightweight and simple model is ideal for 22" x 28" (550x700mm) Poster Paper you can find at your local hobby store although any size will work OR standard printer paper ! Whether you are shooting 3D model pictures on your…
Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant
Intro A simple cap that changes your mobile phone (or any other LED torch) into a CAMPING LIGHT . The design was inspired by Japanese paper lamps . The cap was designed as simple as possible , so it may be used in the most flexible way.…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
This enchanting 3D Printed Ghost Decoration with a captivating twist - it illuminates with a mesmerizing glow when you place a tea light inside! This spooky and whimsical ghost is the perfect addition to your Halloween decor, adding an…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant
Printing: The pine cone lampshade was printed with only one perimeter. A modifier and a negative volume are included in Prusa Slicer project file to create a geometry that can be clamped in between the two lamp holder parts. Please see…
Print approx. €0.30–€0.36 excl. taxPreliminary estimate for one variant
Lighthouse Island in LowPoly style ! MANY OTHER FREE MODEL HERE --> https://makerworld.com/en/@robix93/upload Filament used --> Eryone PLA Glitter Purple
Print approx. €5.58–€6.82 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE! This model's license has been updated to Public Domain, and now allows for sale with zero royalties. I do not own any rights or licenses to Star Wars intellectual property, so sell at your own risk. --- This pool noodle lightsaber…
Print approx. €4.10–€5.01 excl. taxPreliminary estimate for one variant
A revised version of my previous gator chip clip! Put the chip bag in the jaws and use the tail to cam-lock the clip closed. I wanted to improve the printability of the design and make it totally print-in-place. Changed the orientation of…
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…
Print approx. €3.77–€4.60 excl. taxPreliminary estimate for one variant
3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Check out: my Instagram to see the tealight Print with a low temperature (195C) to avoid stringing otherwise standard print settings. Made for tealights with 39.5 mm in diameter
Print approx. €5.80–€7.09 excl. taxPreliminary estimate for one variant
Lighting cable saver for standard Apple lighting cable. Suitable for USB-A to Lighting cable ( does not fit newer USB-C to Lighting ). The cable saver clips together to completely protect the cable. Print instructions I printed this in…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
1. Introduction The perfect toys to print if you want to play “thumb war” like a true Jedi or with the dark side of the force like a Sith Lord ! First, chose your handle and your destiny ! I design all handles based on the real ones you…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Very easy print. Standard print settings, just dry your filament and print at 200 to avoid stringing.
Print approx. €6.17–€7.55 excl. taxPreliminary estimate for one variant
A play of light and shadow, kindling for whimsical fables. Open source version of https://cosmicjubilee.com/designs/twinkling-bloom/ - available to buy now! A tealight holder with delicate tendrils growing from its base, designed to cast…
Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant
A fun print I did as gifts for my family this last Easter. 75mm tall without the tea light under it. Print out the ring to decorate the light under it. Print instructions NO support just print upright. I printed at 0.2mm layers.
Print approx. €2.17–€2.66 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
Print approx. €8.89–€10.87 excl. taxPreliminary estimate for one variant
This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Melting Candle Tea Light Candle Holders
Print approx. €3.82–€4.66 excl. taxPreliminary estimate for one variant
Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…
Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant
Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
used these USB LEDs you can buy them here použito tyto USB LED zde je koupíte
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for one variant
Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…
Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant
I needed a present for secret Santa in my girlfriends family and knew that she liked Pokemon and Pikachu in particular. So i made her a Lamp "powered by Pikachu”. i will include my g-code file put please just use it as reference and slice…
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant
Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…
Print approx. €3.34–€4.08 excl. taxPreliminary estimate for one variant
I wanted a simple solution for a photo studio lightbox that could be stored with minimal space. Had the idea of using 3mm K-Line sheets and printing some parts to keep them together in a square. Printing All the pieces were printed in…
Print approx. €4.55–€5.57 excl. taxPreliminary estimate for one variant
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This one Really flies high! Update 23/03/09: I have been breaking many pulleys (for science!), and today a friend of mine also complained that his kids broke theirs, it couldn't have been any coincidence, so after looking better in cad… I…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for PETGSource material: PET
Keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 34mm x 23mm 6mm Keyring hole
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
Mount and display your favorite bic lighter on the Honeycomb Storage Wall
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Make sure to check out my updated remix that integrates Neebick's stand! Remix of JordanK's design because I was still having trouble squeezing the cable into the box while still being able to close the lid. Increased the external height…
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
This had been requested to continue a Mario theme for an Ikea Skadis pegboard, went through a few different options for the lights before finally stumbling across these lights on Amazon ( https://a.co/2cM1ZD1 ). I like how they use AA…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
The included screws with the slzb-06 for surface mounting looks small, and easy to rip out when removing the adapter. This mount solves this by using 3x16 or similar countersunk screws. For anyone using imperial, a screw with ¼” head…
Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant
Fun Jack o' Lantern Tea Light! Various faces, each with a rim on the bottom for easy stacking. Print the lids you want for the top pumpkins. Refer to the original for tips on infills and face reference numbers. Like the design? Buy me a…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Made for 38mm diameter tealights. Standard print settings. If you like the design. Check out this salt bowl: https://www.printables.com/model/1135479-greek-pillar-table-salt-bowl-with-spoon
Print approx. €5.68–€6.94 excl. taxPreliminary estimate for one variant
Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…
Print approx. €0.90–€1.11 excl. taxPreliminary estimate for one variant
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This is a replacement dimmer knob for one that was broken. Print instructions Print with a brim. No support needed otherwise. I printed at .15mm resoution.
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.
Print approx. €4.47–€5.47 excl. taxPreliminary estimate for PETGSource material: PET
With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
I had issues with the stock alignment guides because they had play or didn't fit both the alu extrusion and linear rail so I designed complaint ones so they are a lot more forgiving in terms of accuracy on your old printer. this is the…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant
I refactored this bin with 1mm wall and better inner fillets to avoid infill for faster printing (2h with IS structural for perfect quality, 1h with speed profile) and require less filament (46g vs 83g for the original model) You must add…
Print approx. €2.43–€2.97 excl. taxPreliminary estimate for one variant
I modeled New Jean's Binky Bong light stick. The full project costs about $50 USD to make and the links for everything I used are below (American links). Print Instructions: I printed these on a Creality Ender 3. I made a little mistake…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Print with a low temperature roughly 195C
Print approx. €3.22–€3.94 excl. taxPreliminary estimate for one variant
This will cast a shadow on the wall with a tea light. Uses 2 4mm bolts to attach so you can move the shadow. I have added the tea light base so you can make your own shadows. edit: added thicker files.
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Inspired by the Raylite plastic Christmas church. My Bubba always put one of these out at Christmas. I have no idea whatever happened to hers so I decided to recreate my own. I pieced this together from images I found on the net. Not an…
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
I modeled this as a replacement for any broken strip holders. or maybe you'd just like some more interesting colors in your strip bay, all the power to you. best printed right side up with supports touching the buildplate.
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Color change at 8.6mm (Optional) Want MORE? Visit the CHIP CLIP COLLECTION
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for one variant
Einstellhilfe für Tischkreissäge wie z.B. Metabo TS254 oder Bosch GTS 10 XC Die Grundplatte mit der Messuhr läuft mit einem Gleitstein in der Nut des Tisches. Damit kann das Sägeblatt parallel zur Nut oder der Schiebeschlitten parallel…
Print approx. €3.21–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET
I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…
firts one i printed with 0.4 nozzle and spiral mode, but is was very fragile. second attempt 0.6 nozzle this one came out nicly for the hole in the base switch off the: remove al holes, in the menu mesh fixes (if you wan a vase, don't do…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
Shadez are slide on filters that change the color of your lightbulb. Simply print Shadez in your favorite color of filament and insert it onto a standard A19 lightbulb. Shadez turns your light source to the color of your filament! Note:…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
This is my first assembly project with my 3D Print. This traffic light is comptatible with the Brio system and is easy to integrate. The round part can be directly painted in the correct color or can be printed in white and then colored…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
This design is an 1/8 scale model and will compliment my design of the Brewster Bomb Rack of WW2 used primarily in the Pacific Theater by U.S. Marine Corp aviation units flying the early F4u Corsairs. You will need to purchase 2 sizes of…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Was designed to fit my ring finger. The inside can be covered with a piece of tape to make it more comfortable. There are numbered, different sized clips to adapt to your finger. It might also be possible to scale the model up or down for…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
The original model fits on a Skoda Enyaq, but it blocks a bit sight at the bottom. Furthermore, i have added a small opening to drain water.
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Lukisegler XXS 3d-printed free-flight glider. Printed in LW-PLA. Reinforcement for the fuselage and main spar printed in regular PLA. Wingspan: 400mm Length: 260mm Weight: 18g Additional parts: 1x M3 x 20 screw 5-6x M3 nut 4x M4 nut.…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Instead of having the T2 camera sit on top of the TV this stand helps to position the camera in a good position in front
Print approx. €2.91–€3.56 excl. taxPreliminary estimate for one variant
Oldie but goldie! The Squirting Lighter is a classic prank - and now it's fully printable! Just print, assemble, fill with water and the fun can begin. There are only 3 Parts to print: Lid Body Tube (optional, there is also a version for…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .
Print approx. €5.92–€7.23 excl. taxPreliminary estimate for one variant
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
Print approx. €3.31–€4.05 excl. taxPreliminary estimate for one variant
LED Light: https://de.banggood.com/AMBOTHER-2PCS-Tri-ROW-4-Inch-9-32V-20-LED-Work-Light-Bar-Flood-Spot-Beam-Offroad-SUV-Driving-Truck-ATV-UTV-Boat-Fog-Lamp-Waterproof-p-1764193.html Attention: The lamp has no integrated undervoltage…
Print approx. €11.79–€14.41 excl. taxPreliminary estimate for one variant
This is a lighted lithograph frame that looks like an old style TV from the 1960s and 1970s, even the early 1980s. Since this looks like an old tube TV it makes a great gift for someone that remembers watching TV on one of these. It…
Print approx. €6.41–€7.83 excl. taxPreliminary estimate for one variant
This is a remix of a very nice comcept of a lightbar that moves with the Z axis. If you like my model, please consider -> https://buymeacoffee.com/teacherribeiro If you like my model cheCk my 4010 mount for ender 3 V3 SE Printing…
Print approx. €4.25–€5.20 excl. taxPreliminary estimate for one variant
Parts for IKEA Behjälplig
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
APOLOGIES to the first dozen or so people who viewed this. I uploaded an error that is now fixed. I've printed now the “Lego Lightsaber Hilt (Human Scale)" by ReProps several times. This model addresses a couple little issues I had with…
Print approx. €13.86–€16.94 excl. taxPreliminary estimate for one variant
This 3D model features a festive Christmas tree designed to fit LED tealights, adding a warm and cozy holiday touch to your decor. The design comes in two versatile variants: Clip-On Version : Securely clips onto an LED tealight with a…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
Here's my super long lightsaber, like to print it. Supports are not required, for best results use a 4mm nozzle. The katana is about 40 inches/102cm long in total and the handle is about 7.8 inches/20cm long. Have fun printing.
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Warning: Do not use a real tealight! Notes: The floor is friction fit from the top. The remaining elements can be glued in place with cyanoacrylate. Supports aren't required but they help. You can add text to the front of the school…
Print approx. €4.13–€5.04 excl. taxPreliminary estimate for one variant
![Cable Repair and Protect for iPhone and Samsung [lightning+usbc]](https://media.printables.com/media/prints/590112/images/4827822_b916b887-676b-4723-b0c9-90881c40951e_31bb8182-a7ba-4745-adfd-b9d44646baac/195cfe9b-40fc-4570-b695-c540798fc979.jpeg)
