Wyniki wyszukiwania: lig

Collapsing Lightsaber (Print in Place)

This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…

Ultralight 2gram Glider (print in place)

If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…

Slightly Over Engineered Trash Bag Roll Holder

https://www.buymeacoffee.com/maxt ---------------------- 2 versions in one package: Without a recycle logo on the side With a recycle logo on the side Why should you use this model and not the others? It won't break, ever (as long as you…

A *slightly* Overengineered Olpe Vase (print in vase mode!)

Please consider supporting my hobby. You will make my day! Interested in selling prints of this model? Join my Exclusive Print Seller Tier on Patreon for the rights to list and sell prints of this model . Please note that if you are not a…

Collapsing Lightsaber (Removable Blade)

This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…

Cable Repair and Protect for iPhone and Samsung [lightning+usbc]

The charging cable always breaks at the same position, just right under the plug. Don't replace it, Repair it with this easy print! This works for Apple USBC and lightning, as well as for samsung charging cables! No glue or tape is…

LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ available in single light, dual light, and MMU2 compatible dual light versions. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires…

Cauldron Tea light Holder

Elevate your Halloween ambiance with our 3D Printed Cauldron Tea Light Holder. This enchanting, meticulously designed piece adds a touch of spooky elegance to your décor. Illuminate your Halloween festivities in style with this bewitching…

Garmin Approach R10 Golf Launch Monitor Stand - Shot Alignment and Leveling Aid

This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…

Lego Compatible Outlet and Light Switch Cover (FIRE HAZARD)

(⚠ FIRE HAZARD ⚠) This Lego compatible outlet and light switch cover are perfect for children's rooms or just having fun. Decorate your light switch or outlet cover with Legos, or just have fun and play. Great Remix for rocker switch by…

F23 ultralight glider Print in Place

A completely new Ultralight Glider design inspired by the YF23 fighter jet concept and using lessons learned from my previous Ultralight 2gram Glider: https://www.printables.com/model/430012-ultralight-2gram-glider-print-in-place (also…

F-35 Lightning (Remake 2.0)

F-35 Lightning (Remake 2.0). Model fixed upon suggestion.

cigarette container with lighter

there is a better model!!! V4 link I designed this container for the holidays near the pool to keep my cigarettes dry. Print this without support and with a layer height of 0.2 to keep the threads nice. Update 15-aug-22: For easy printing…

Moon Lamp LED Tealight

TL;DR A little fast printable moon lamp cover to put over a cheap LED-Tea-Light. Mentioned on YouTube: Many thanks to Chris for presenting the model in his nice channel. More stuff for IKEA moon fans:…

ChooChoo - A Lightweight/Support Free 4 Tone Train Whistle v3.1

Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…

Single LED Light Bar Prusa i3 MK2/MK3

Single light bar for the Prusa i3 MK2/S and MK3/S/+. Mounts attach to the hexagonal holes in the z-axis tops. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of…

Lightweight Poster Paper Backdrop

This two part lightweight and simple model is ideal for 22" x 28" (550x700mm) Poster Paper you can find at your local hobby store although any size will work OR standard printer paper ! Whether you are shooting 3D model pictures on your…

Spooky Tea Light Ghost

This enchanting 3D Printed Ghost Decoration with a captivating twist - it illuminates with a mesmerizing glow when you place a tea light inside! This spooky and whimsical ghost is the perfect addition to your Halloween decor, adding an…

Greebles Part 2! Lights, Power units, Vents, Ladder, Control units and more!

Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…

Pine Cone Table Light

Printing: The pine cone lampshade was printed with only one perimeter. A modifier and a negative volume are included in Prusa Slicer project file to create a geometry that can be clamped in between the two lamp holder parts. Please see…

Low Poly Lighthouse

Lighthouse Island in LowPoly style ! MANY OTHER FREE MODEL HERE --> https://makerworld.com/en/@robix93/upload Filament used --> Eryone PLA Glitter Purple

Pool Noodle Lightsaber Handle

UPDATE! This model's license has been updated to Public Domain, and now allows for sale with zero royalties. I do not own any rights or licenses to Star Wars intellectual property, so sell at your own risk. --- This pool noodle lightsaber…

MMU2 LED Light Bar Prusa i3 MK2/MK3

Light bar for the Prusa i3 MK2/S and MK3/S/+ compatible with the MMU2/S. Mounts are designed to fit 9x17mm aluminum u-channel and have a hollow interior that is used to route the wires down the back of the printer frame for a clean look.…

Ender 3 V3 SE Lighter Fan Shrouds

3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…

Kivuli tealight

Check out: my Instagram to see the tealight Print with a low temperature (195C) to avoid stringing otherwise standard print settings. Made for tealights with 39.5 mm in diameter

Lightning Cable Saver

Lighting cable saver for standard Apple lighting cable. Suitable for USB-A to Lighting cable ( does not fit newer USB-C to Lighting ). The cable saver clips together to completely protect the cable. Print instructions I printed this in…

Thumb Wars Lightsabers (Finger toys)

1. Introduction The perfect toys to print if you want to play “thumb war” like a true Jedi or with the dark side of the force like a Sith Lord ! First, chose your handle and your destiny ! I design all handles based on the real ones you…

Ryobi Laser Cube Alignment and Leveling Stand for Garmin Approach R10 Golf Launch Monitor

This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…

Elegant tealight

Very easy print. Standard print settings, just dry your filament and print at 200 to avoid stringing.

Easter Egg Tea Light Cross

A fun print I did as gifts for my family this last Easter. 75mm tall without the tea light under it. Print out the ring to decorate the light under it. Print instructions NO support just print upright. I printed at 0.2mm layers.

Fleshlight Drying Rack (Original and Go) print in place

Iphone Lightning Cable protector

This are protector for the expensive original Apple Lighting cable, develop this thing to try to avoid buying new cables twice a year. Better if printed in TPU or flexible material, but works with PLA and ABS or Petg Basic setting, 0.2…

Melting Candle Tea Light Candle Holders

Melting Candle Tea Light Candle Holders

Hydraulic Disc Brake Alignment Tools

Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…

Head Creeper Minecraft LED Light / Hlava Creeper Minecraft LED světlo

used these USB LEDs you can buy them here použito tyto USB LED zde je koupíte

Bear Upgrade LED Light Bar Prusa i3 MK2/MK3

NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…

Desk lamp with an orbital design, mood lighting, and bridge structure

Update: STL now available , I recommend to print the gcode as it is optimized but if you can't print the gcode you can load the STL in your slicer and try this way. I also add a 3mf with the settings to print it from the orca slicer.…

Pikachu Light Stand

I needed a present for secret Santa in my girlfriends family and knew that she liked Pokemon and Pikachu in particular. So i made her a Lamp "powered by Pikachu”. i will include my g-code file put please just use it as reference and slice…

Suction Cup Mount for ANY Fleshlight/ Fleshjack Model

Additional Hardware and Assembly Suction cups fit into holes with a bit of pressure and twisting. It takes a bit of elbow grease but they will squeeze in. I bought a generic multipack of suction cup hooks of different sizes for about $5…

Modular Photo Studio Light Box

I wanted a simple solution for a photo studio lightbox that could be stored with minimal space. Had the idea of using 3mm K-Line sheets and printing some parts to keep them together in a square. Printing All the pieces were printed in…

Crystal Tower - Light diffuser Lantern

A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…

Worlds Lightest 1gm Functional Ring Counter. (Vase Mode/Spiral print) , A Must have! knitting counter

Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…

Philips Hue Lightstrip corner

Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…

HSW - Bic Lighter

Mount and display your favorite bic lighter on the Honeycomb Storage Wall

Slightly larger Steam Deck USB-C Charger Cradle (USA)

Make sure to check out my updated remix that integrates Neebick's stand! Remix of JordanK's design because I was still having trouble squeezing the cable into the box while still being able to close the lid. Increased the external height…

Lighted Mario Star for Ikea Skadis

This had been requested to continue a Mario theme for an Ikea Skadis pegboard, went through a few different options for the lights before finally stumbling across these lights on Amazon ( https://a.co/2cM1ZD1 ). I like how they use AA…

Tealight Snowglobe

Tealight Christmas globe Are you looking for a design Christmas decoration or ornament that is easy to print and yet will get everyone excited? Here you have it! Print this gorgeous M size ornament as a stand alone decoration or print the…

smlight slzb-06 wall mount

The included screws with the slzb-06 for surface mounting looks small, and easy to rip out when removing the adapter. This mount solves this by using 3x16 or similar countersunk screws. For anyone using imperial, a screw with ¼” head…

Pumpkins candle holders for tea light with Lid and Stacking Rim

Fun Jack o' Lantern Tea Light! Various faces, each with a rim on the bottom for easy stacking. Print the lids you want for the top pumpkins. Refer to the original for tips on infills and face reference numbers. Like the design? Buy me a…

Lightning cable protector

Long protector for the lightning cable. Easy to slide on and off.

LED Light Remote Holder: Organize Your Lighting Controls with Ease

LED Light Remote Holder: Organize Your Lighting Controls with Ease Product Description: The LED light remote holder is the perfect accessory to keep your LED light remotes organized and easily accessible. Designed to fit the remotes for…

Greek tealight pillars

Made for 38mm diameter tealights. Standard print settings. If you like the design. Check out this salt bowl: https://www.printables.com/model/1135479-greek-pillar-table-salt-bowl-with-spoon

Type-C/Lightning Tesla SuperCharger Phone Charger

Tesla Supercharger Phone Charger! The original design didn't fit type C cables so i remixed it, i uploaded the full charger in each folder for easy download but the only part that differs is the Red Middle. The Type C socket is made for a…

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

KTM EXC/EXC-F Front Headlight replacement

Save your original headlights from a crash by using this shield instead. Screws in with the regular screws. Fits EXC/EXC-F 2017 - Present and probably older versions as well. Print without support.

Shopping Cart Coin Key - OLV (Overengineered Lightweight Version)

With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…

Voron 0/0.1 compliant rail alignment guide (MGN7 1515)

I had issues with the stock alignment guides because they had play or didn't fit both the alu extrusion and linear rail so I designed complaint ones so they are a lot more forgiving in terms of accuracy on your old printer. this is the…

'17-'23 KTM Headlight Frame for Diode Dynamics LED SSC2

Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…

Light Prusa MK4/MK4S bin two hooks

I refactored this bin with 1mm wall and better inner fillets to avoid infill for faster printing (2h with IS structural for perfect quality, 1h with speed profile) and require less filament (46g vs 83g for the original model) You must add…

Binky Bong Light Stick (New Jeans)

I modeled New Jean's Binky Bong light stick. The full project costs about $50 USD to make and the links for everything I used are below (American links). Print Instructions: I printed these on a Creality Ender 3. I made a little mistake…

Uien tealight set

Print with a low temperature roughly 195C

Tea Light Shadow

This will cast a shadow on the wall with a tea light. Uses 2 4mm bolts to attach so you can move the shadow. I have added the tea light base so you can make your own shadows. edit: added thicker files.

Ultralight glider V3 (170mm)

Ultralight glider by robotfriend scaled down to print on the mini+ or smaller printers. UPDATED TO V3 No modifications have been made aside from the scale down but it still flies well.

Lil' Christmas Church Nightlight

Inspired by the Raylite plastic Christmas church. My Bubba always put one of these out at Christmas. I have no idea whatever happened to hers so I decided to recreate my own. I pieced this together from images I found on the net. Not an…

Chair Stopper (Simracing / Flightsim)

Summary Stopper for office chair for simracing and flightsimulators. Due to the round design, there is no need to adjust the wheels orientation. The model is fully parametric. A list of all variables and their default values: d_wheel =…

Alligator Chip Clip

Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Color change at 8.6mm (Optional) Want MORE? Visit the CHIP CLIP COLLECTION

Wind Powered Lighthouse with Savonius Turbine – Rotating LED Tea Light Effect

Detailed Description Video day Video evening This wind powered lighthouse uses a Savonius turbine to rotate the complete upper lighthouse structure using only airflow. Inside, a standard LED tea light remains stationary while the…

Lightweight grip for Reximex RP (MITO)

Making Reximex RP (MITO) light. Intended to be used in ISSF 10 m air pistol competition. With removed shroud (and replaced by 3d printed front sight) down to 733g. I have used PrusaSlicer split tool with dovetail option to separate the…

Canon Speedlight Grid

I was after a grid for my Canon 580 EXII speedlight, but none of the ones I could buy really appealed to me. They all seem a bit “clunky”, held together with magnets, rubber bands or Velcro. I figured there had to be a neater way. These…

CarboPod - a lightweight and adjustable picatinny bipod made with CF tubes

I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…

Desktop Twin Engine Throttle for Flight Simulation

This Throttle goes along with my G1000 setup . Its main feature is the simple design and slim layout, which (unlike regular Throttle quadrants) fits on a desktop. Instead of rotary potentiometers and a clumsy gear mechanism, it uses 100mm…

Ender 3 Magnetic Bed Aligner - Thinner

A simple remix of boodaah3d's magnetic bed aligner model but chopped down so that the edges of the aligner don't stick up past the build plate. My build plate/heated bed is almost exactly 5.5mm thick, and this model sits just flush with…

Lamp for e14 and e27 light ~ or vase..

firts one i printed with 0.4 nozzle and spiral mode, but is was very fragile. second attempt 0.6 nozzle this one came out nicly for the hole in the base switch off the: remove al holes, in the menu mesh fixes (if you wan a vase, don't do…

Lighter Gridfinity Magnet Baseplate

Here is a Gridfinity baseplate designed to save filament and magnets. It still uses the default 6x2mm magnets in the same positions and is compatible with other gridfinity bins and models. There is an included STEP file so you can make it…

Shadez-Colorful LED light filters

Shadez are slide on filters that change the color of your lightbulb. Simply print Shadez in your favorite color of filament and insert it onto a standard A19 lightbulb. Shadez turns your light source to the color of your filament! Note:…

Brio Traffic light / Ampel

This is my first assembly project with my 3D Print. This traffic light is comptatible with the Brio system and is easy to integrate. The round part can be directly painted in the correct color or can be printed in white and then colored…

FlightLine 1600mm Corsair 1/8th scale 500lb Bomb

This design is an 1/8 scale model and will compliment my design of the Brewster Bomb Rack of WW2 used primarily in the Pacific Theater by U.S. Marine Corp aviation units flying the early F4u Corsairs. You will need to purchase 2 sizes of…

Skoda Enyaq back up camera light hood

The original model fits on a Skoda Enyaq, but it blocks a bit sight at the bottom. Furthermore, i have added a small opening to drain water.

Xiaomi Mi Computer Monitor Light Bar mount for Logitech Streamcam

This is my attempt to marry Xiaomi Mi Computer Monitor Light Bar and Logitech Streamcam . I'm pleased with both products, but I was so mad that there was no solution to use them together without any stupid workarounds. When I started…

Lukisegler XXS 3d-printed free-flight plane

Lukisegler XXS 3d-printed free-flight glider. Printed in LW-PLA. Reinforcement for the fuselage and main spar printed in regular PLA. Wingspan: 400mm Length: 260mm Weight: 18g Additional parts: 1x M3 x 20 screw 5-6x M3 nut 4x M4 nut.…

Stand for Govee T2 TV Backlight

Instead of having the T2 camera sit on top of the TV this stand helps to position the camera in a good position in front

Squirting Lighter

Oldie but goldie! The Squirting Lighter is a classic prank - and now it's fully printable! Just print, assemble, fill with water and the fun can begin. There are only 3 Parts to print: Lid Body Tube (optional, there is also a version for…

Lighthouse

Haptic model for the visually impaired, based on the book " Kamil – malíř snů " by Markéta Vítková. Read more about the project on PrusaLab's blog .

Light Yagami

Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤

DIY 18V Makita Bosch LED Worklight Headlight Lamp

LED Light: https://de.banggood.com/AMBOTHER-2PCS-Tri-ROW-4-Inch-9-32V-20-LED-Work-Light-Bar-Flood-Spot-Beam-Offroad-SUV-Driving-Truck-ATV-UTV-Boat-Fog-Lamp-Waterproof-p-1764193.html Attention: The lamp has no integrated undervoltage…

Lithograph Lighted Old Time TV Frame

This is a lighted lithograph frame that looks like an old style TV from the 1960s and 1970s, even the early 1980s. Since this looks like an old tube TV it makes a great gift for someone that remembers watching TV on one of these. It…

Light Mount Ender 3 V3 SE

This is a remix of a very nice comcept of a lightbar that moves with the Z axis. If you like my model, please consider -> https://buymeacoffee.com/teacherribeiro If you like my model cheCk my 4010 mount for ender 3 V3 SE Printing…

IKEA BEHJÄLPLIG - Dishwasher Door Mount

Parts for IKEA Behjälplig

Lego-ish Lightsaber Hilt designed for Pool Noodles

APOLOGIES to the first dozen or so people who viewed this. I uploaded an error that is now fixed. I've printed now the “Lego Lightsaber Hilt (Human Scale)" by ReProps several times. This model addresses a couple little issues I had with…

Christmas-Tree for LED tealight

This 3D model features a festive Christmas tree designed to fit LED tealights, adding a warm and cozy holiday touch to your decor. The design comes in two versatile variants: Clip-On Version : Securely clips onto an LED tealight with a…

Collapsing Lightsaber (Multi-Part)

Here's my super long lightsaber, like to print it. Supports are not required, for best results use a 4mm nozzle. The katana is about 40 inches/102cm long in total and the handle is about 7.8 inches/20cm long. Have fun printing.

School House Tealight Holder

Warning: Do not use a real tealight! Notes: The floor is friction fit from the top. The remaining elements can be glued in place with cyanoacrylate. Supports aren't required but they help. You can add text to the front of the school…

Dragon Decoration / Filigree

Dragon Decoration / Filigree

Christmas Light String Storage - reduces next year's unravelling frustration

Roll up your string of tree lights on this reel. It will reduce the anxiety next year when unraveling the lights. During the unroll this year, the tangled lights brought me anxiety. So, I am going to try this in January and December 2023.…

Hue Tap dial light switch backplate

Backplate to install a Philips Hue Tap dial switch on top of an existing (NL) light switch in such a way that the original switch mechanism remains accessible (albeit without its plastic coverings). Similar (commercially available)…

Light Stand for Designer Lithophane Moon Lamp

This is a Light Stand for the Designer Lithophane Moon Lamp by Frank Deschner. For the moon printed in 75%-Scale. It can be put on the IKEA FADO lamp as an adapter. The bayonet-mechanism is redesigned by myself for an improved…

Light, Heavy and Medium Guitar Picks

Standard sized picks

Fallout 4 Mini Nuke Bluetooth Speaker and RGBW Nightlight

This is a 3D Printable model of a Fallout 4 Mini Nuke which has provision for a Bluetooth speaker and RGB lighting in a translucent top that can be used as a nightlight or just as a display piece. Re-Mix Notes The Fallout 4 Mini Nuke…

Holder for RGB-LED-Remote Control - "Mi-Light"

I do use an enforced support for the center part of the shell only. (see pictures)

LED Light Strip 45° Mount

LED strip mount to clip a light strip in a 45° angle. I designed it for a Philips Hue Lightstrip to be mounted behind a cabinet. The mount can be taped to an object, but in my case I decided to drill holes afterwards and mounted it with a…