71 models
Tiles/tokens for OK Play , AKA Cinco Linko , remixed to be easier to use for the color blind. I added a box that holds 15 tiles of each color. I updated the look of the tiles a bit. Support My Work Should you want to, you can support me…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant
**Note: I never printed/tested this. See the note below for an explanation. For my newer designs that I did print, see https://www.prusaprinters.org/prints/10121-dice-tower-and-organizer-plinko-style and…
Print approx. €12.21–€14.93 excl. taxPreliminary estimate for PETGSource material: PET
Žáci si vytvoří papírový model bylinkového zápichu, ze kterého pak vytvoří 3D model. Zápich si vytisknou na 3D tiskárně.
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
Žáci si nejprve vymodelují v programu Tinkercad zápich a destičky s názvy bylinek, které následně vytisknou a využijí se jako pomůcka pro označení bylinek na školní bylinkové zahrádce.
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Looking for a solution to reliably hookup CAN devices, fans, sensors and more to your beloved 🥰 VORON with a tiny bit of 😎 premium touch ? This custom skirt for CNLINKO LP12 (and compatible) connectors might be it! Why This Mod Exists…
This is just a tiny little model for the Option Plate Mod of the 🥰 BoxTurtle's rear skirt. It accommodates a CNLINKO LP-12 💪 connector, e.g. to connect both CAN and 24V. Additionally, the design incorporates a dedicated cable outlet for…
Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…
Folding dice tower with dice box to hold one set of standard sized polyhedral dice. No supports needed. Slight trimming of Tray required on the flat circles near hinge. 8mm Screws are the hinge for lid and tower Nuts, M3 | [QTY 15] Bolts,…
This was just a random idea for me to design and is a way to keep my skills fresh and improve upon them over the summer. edit: I added a new stand to address problems Note that it was a rush job as this was my 1st day of collage :p
same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Printed in PLA with .15 layer height and .4mm mozzle on a Voron Trident 350mm. Filament used is iiidmax Fluorescent Green PLA+. This adds a little bit of marble mixing when adding marbles back into the hopper. For a future design update I…
I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.
I have remixed tetsu97 's umbilical mount for G2SA with PG7 fixing point by moving it to the right. Added channels for zip-tie that is meant to secure the umbilical cable. The stl is print oriented and includes sacrificial support (in…
Just a simple disc with the treble cleft. Pause the print to change filament colors. I can model up a CNC router plinko board if there is enough interest.
The original stubby mount for an M12 cable gland has an M12x1.75mm pitch. The CNLinko connectors have M12x1.25mm pitch so I re-modelled the mount to have an M12x1.25 thread. CNLinko waterproof connectors in various pin configurations can…
EBB36 Mount with CNLinko Adapter for Orbiter 2.0 and G2SA. Solidworks file posted if you wish to make some changes. Needs (5) M3 heatset inserts. I've installed this is my Micron and Trizero and havent had any clearance issues.
Plinkodrop - Tabletop Marble Run A simple, mechanical tabletop plinko game designed for your desk. Drop the marble at the top and watch it bounce through a grid of triangular pins, funnel through the side ramps, split around a center…
Plinko is a game in which a falling ball must land in a place at the bottom . Use a Marble ball, it give the best experience Throw the ball into the hole and watch it fall in a satisfying way !!!
SB PCB/Galileo2 Strain relief mount zip tie locations that sit flush with the mount use CNLINKO M12 quick disconnect or M12 strain relief
This is my entry for the Dice Tower contest. My original idea was a castle with a drawbridge system but I realized I didn't have enough time to model it before the end of the contest so I went with a Plinko game to make it interesting.…
After using my old dice tower for over 2 years, I had some ideas for improvement. This new one features a print-in-place hinge design Low walls on the tray ensure that your dice are easily readable after a roll During play, use the…
This piece comes with Umbillical Back Cable .
Remix Details: Improved chamber seal, rear panel is now sandwiched between the cover and trim when tightened. Bowden entry threaded for a PC4-M10 fitting. Added a PG7 Key for easier tightening or removal of PG7 strain reliefs.…
remix of: https://www.printables.com/de/model/463220-voron-cw2-stealthburner-ebb-sb2240-pg7-umbilical-m thanks for the initial work! to fit plug: https://aliexpress.com/item/4001153106923.html and wire harness of one mellow Fly-SB2040…
The man for whom I made this said that the clips are awesome. It was the 4 of 5th version when I finally polished it to fit nice for his vintage car. Must be printed as oriented with well-dried PA with an organic supports. 0.4 nozzle and…
use flathead screws
A plinko style dice tower designed for d&d. It's open faced so you can see the action, but the dice won't fall out of the angled pegs. See how it works here: https://www.youtube.com/watch?v=sI64v1gKJUo During play it assembles to provide:…
All you need are: friends, fridge and a lot of beer!! (also a 3d printer) All the parts mount 5x3mm magnets. for the pin you need 3 magnets for the esge you need 2 magnets for the finish element 1 magnet for the trasparent panel I used an…
Hello! I have created an umbilical plate for the Voron 0.2. with CNlinko connectors and an outlet for the bowden tube. You still need the following things for the mod: 1x Cnlinko 4 or 6 Pin M12 (Plate Version) 1x Outlet for Bowden Tube 4x…
The source marked this model as adult content.
This design is wider than the old one so larger coins should work. Also stopping this print to switch out colors looks great with this model (look at the original post for examples).
This model will help store most dice and if you put it at the top of the Plinko it will roll the dice for you. P.S. I don't have a 3d printer and I am new to designing 3d prints so if it isn't perfect I am sorry. I also don't know how to…
This is a modification to the End Cap to allow you to use the CNLINKO LP-16 M16 Connector https://www.amazon.com/dp/B0816BMDKQ?ref_=cm_sw_r_apin_dp_Z64RTF47HAMNZWPDRRAZ I had another person make this for me based on the original design
Help make a decision just number your choices 1-5 and let the plinko decide.
Dice tower but plinko style! Will need to supplement this print with a piece of glass or plexiglass. The dimensions are on the picture 164mmx134mmx3.175mm. This should fit all standard sized dice d4's, d6's, d8's, etc etc. Print on its…
Opět je tady ta část roku, kdy začínáme pomalu vysazovat bylinky, tak jsem připravil jednoduché jmenovky 26 nejpoužívanějších. It is that time of the year when we start working on our herb garden so I prepared simple tags of the 26 most…
This model is built as a functional desktop game rather than just a decorative board. The peg spacing, puck size, scoring area, side guides, stand, and drop lanes are designed together so the finished print can actually be played. The…
Based on the 4 jar method of teaching kids to save, this model adds a fun twist. There is a direct slot to each of the jars as well as a random jar selection by use of something similar to the popular game Plinko. Let's say your child…
The cheapest acrylic sheet in my local hardware store is 8" x 10", so I wanted to make the most of the surface area by increasing the height of the tower. The new dimensions for the acrylic/polycarbonate sheet are 7 ½" x 4 ½". I had my…
Added a cable cutout to this great design. All so added a zip tie reinforcement slot.
Exhaust cover with PTFE tube guide and 2 CNLINKO-LP12 connector outlets. Remixed the great model from @NyxCode_817344 . I have included the .stp file for further remixing or modifications.
This Pachinko-style tower is open in front but does not need a cover glass: the angled pins and walls keep the dice from falling backward. The included slide-on cover seals the tower for dice storage/transport and acts as a tray for the…
Šablona pro linkování notesu s kroužkovou vazbou formátu A6. Rozteč linek 8 mm. Horní linka může být jako dvojlinka. Možnost krajových linek. Určeno pro pentilky s tuhou 0,7 mm. Drážka je rozšířena pro centropeny s velikostí F. Materiál…
I like it sturdy. I wanted to have the cable connection on the lateral side and a little bit lower, so I designed my own strain relief. You will need a few melting inserts and M3 screws. Enjoy.
EBB36 mount for Hextrudort-Low Plus extruder with rigid CNLinko/PG7 mount.
Simple plinko game with 4 different outcomes. comes with pucks.
Plinko Tube Dice Tower This is a dice tower inspired by Plinko mechanics. It's designed to provide fair, random rolls while being easy to print on most 3D printers—no supports required. Dice dropped into the funnel bounce off internal…
Thanks A1lexR for sharing. Just needed a version for threaded CNLinko LP12 terminals. So I remixed your plate. Printed with nobufil ABS+ Kind regards 3dexp
ENGLISH : Dice tower made especially for the competition. Fully printable on a prusa mini. The stand can be printed in a stand, but it's a relatively long stitch. I'm going to put a version of the stand withou support, but it'll consume…
Box for pinstripe brushes. The bristles (squirrel hair) lie on the bottom of the box and do not bend. The brushes are separated from each other, protected from damage and dust. Rounded edges make cleaning easier. There are two lower parts…
you will need to put some rubber bands on these pins 1st picture Pin [File Name] 2nd picture Plinko Board [File Name]
This is a remix of the original BoxTurtle part. It allows you to use a CLINKO M12 connector for the cable that runs between the BoxTurtle and the printer's main board. It's up to the builder to work out the details, but my planned…
GitHub Repository StealthMax V2 CNLINKO LP-16 Umbilical Mod This mod enhances the StealthMax V2 with a redesigned intake that integrates a robust CNLINKO LP-16 umbilical for cable management. Features Integrated Umbilical: The CNLINKO…
I made this for mini dice 15mm. It still uses M3 screws and nuts. It does need an 84mm x 100mm x 2mm plexiglass sheet for the front. I've also removed the dice holder section because I have dice holders and didn't need that part. I made…
Dice tower inspired by Plinko. Printed here in Black PLA from Sunlu, 3% infill with gyroid pattern - 1.5 hours. Maybe it's unlucky, my first roll on it was a 1 on the D20…
Per a user request, I alter the base mounting plate from my original design to work with a Hextrudort CNC Low Extruder Requires (5) M3 Heatset inserts and (3) M3x8 screws to attach the CNLinko Arm to the Extruder Mounting Plate. Spacers…
It needs 3xM3.5 countersink screws to mount.
CNLINKO LP-12 connectors offer a nice and reliable solution to connect external devices (CAN) to your printer, such as a BoxTurtle multi-filament system... For those -like myself- who connect the Voron Trident through wired Ethernet, you…
is a plinko with funnels that work with gravity
A table-top drop game: lean the board back on its two legs, drop a marble in at the top and watch it bounce down through the pegs into one of the scoring slots. Take three drops each and add up your score. Great for parties, school fairs…
Underneath mounting LP-16 socket case. Initialy designed for a M3x20 screws.
Neu gezeichnet um Kabel bequem einlegen zu können. Es werden 2 Schmelzgewinde 3mm und 4 Schmelzgewinde 2mm benötigt.
This is a plinko prize drop puck with a simple design to use as extras or replacements for your plinko prize drop board game. The dimensions for this puck are for the larger prize drop game boards found for example here: Big Prize Drop…
Plinko Tube Dice Tower This is a dice tower inspired by Plinko mechanics. It's designed to provide fair, random rolls while being easy to print on most 3D printers—no supports required. Dice dropped into the funnel bounce off internal…
This is a remix of the original BoxTurtle part. It allows you to use a CLINKO M12 connector for the cable that runs between the BoxTurtle and the printer's main board. It's up to the builder to work out the details, but my planned…
I made this for mini dice 15mm. It still uses M3 screws and nuts. It does need an 84mm x 100mm x 2mm plexiglass sheet for the front. I've also removed the dice holder section because I have dice holders and didn't need that part. I made…
Box for pinstripe brushes. The bristles (squirrel hair) lie on the bottom of the box and do not bend. The brushes are separated from each other, protected from damage and dust. Rounded edges make cleaning easier. There are two lower parts…
