Counting matching models…
This little tool helps you press LM10UU linear bearings into the aluminum housing on your 🥰 Prusa Core One's Y-axis assembly. It makes sure the bearings are fitted centered in the CNC machined housing. As you need to heat up the aluminum…
Original version is the exact same thing that you can download from IGUS website. I just enlarged the center hole for PLA printing. It should fit perfectly on a 8mm rod, at least for my MK2. V2 is the modify version from the original, I…
Nozzles to pack 8 and 10mm linear bearings plus caps
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…
Linear bearing grease cap for 8oz Super Lube Inspired by: https://prusacommunity.com/set-your-bearing-straight/ Improved version 2 adds these features: alignment notch so its easier to line up with the bearings tapered openings for a more…
This improved MK4 version has some new features you asked for - we found a few things we could improve, so we did, as we always do :-) Screw the printed tool on the Prusa Lubricant tube, carefully put the bearing on and turn it…
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
The original adaptor for lm8uu including instructions can be found here . UPDATE - cover for adaptor added (fully compatible with original LM10UU version) - cleaning stick added for leftover lubricant to be removed
Lubricant applicator for LM8UU / LM10UU linear bearings. Luer Lock syringe interface https://eshop.cbmedical.cz/diconex-jednorazova-strikacka-3-dilna--10-ml-luer-lock--sterilni/ Can be printed without supports.
Please try the original authors version before trying the altered version. I had a little trouble with the original 10mm diameter being a little too big, so I used some of the new features in PrusaSlicer 2.6.0 to change it up a little.…
This mod is a modification that incorporates X-axis linear rail upgrade and adapts MK4's 10mm rod X-axis parts and Z-axis parts to the size dimensions of MK3S, MK3.5. In addition to the difference in rod diameter of 10mm, there are other…
Lubricant applicator for LM8UU / LM10UU linear bearings (8 mm / 10 mm nominal inner diameter). Luer / Luer Lok interface for syringes at the back. can be printed without supports. 0.2 mm layer height recommended for best printing of the…
I have igus drylin bearings with the matching rods on my MK3S+ and now that the MK3.9 upgrade is on the way, I'd like to keep them and use it on the new Z axis rods. Unfortunately the elongated version is not available from Igus, so…
Use this simple tool to accurately mark each LM8UU or LM10LUU bearing in your next build with a permanent marker for precise alignment every time. Prep Clean off the oil film on the outside of the bearings before marking with a permanent…
Took the existing LM10UU adapter into Blender and extended the open area by 26mm.
Adapter for the lubricate tube, you recive with your prusa for LM10UU insted of the LM8UU
Als Ersatz für die schlechten Lagergehäuse und der Lager für eine billige CNC2418 damit nichts mehr hakt. Print Information: Printer: Prusa-Mini Filament: PRIMASELECT PETG Grey Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 60% cubic Rafts:…
In the process of upgrading the Y axis of my Anet A8 Plus from 8mm rods and bearings to 10mm rods and bearings, I needed carriers that mounted identically to the LM8 carriers, but would fit LM10 bearings. This is somewhat of a “quick and…
This is a larger design of LM8UU extractor for the SV06 that is designed to fit LM10UU style bearings. I recommend triangle infill. Instructions from original post: Print Settings Layer height 0.2mm Sturdier settings, e.g. 1.2mm walls and…
LM10UU bearing housing It was designed to be backwards compatible with SCS8UU. Use M4 screw nuts(there should be a tight fit). The bearing can be connected to the housing using an zip-tie. I suggest using 0.08/0.10 layer height, should…
The design is based on Prusa Bear Y axis bearing mounts. Its use case does not limit to Prusa Bear machine and even Y axis.
Printed from PLA at .15 and worked as expected. There is a sacrificial layer you must pinch with a screwdriver - therefore no supports needed.
I wanted to reuse the original LM10UU bearings from the MK4S on the Core One and designed this bearing mount. The outer dimensions are identical to the mounted bearings that came on the Core One with the exception of the clamping tab. The…
LM8UU & LM10LUU Bearing Lubrication Adapter 🔧 A simple and practical lubrication adapter for LM8UU and LM10LUU linear bearings , designed to make applying lubricant quick, clean and precise. The adapter allows lubricant to be delivered…
This is replacement to aluminum bearing block. I used these on heated bed movement, with printed blocks you can reduce 160 grams of moving mass. Bolt grid matches on Reprap Trespa carriage plate sod here:…
There are two versions available a 19.00 mm and a 19.05mm bore. Try the 19.00mm bore first and if you're able to press the bearings in (they will be tight as this is likely an interference with how printers work) go with that if it is…
Ever print some mechanical parts and only later realized that it requires LM10LUU bearing and not LM8LUU ones you had prepared? This might be useful for you. An adaptor to fit LM8LUU bearing (dia. 15mm) to fit on LM10LUU (dia. 19mm) slot.…
I recently bought a UNI-T model LM100 laser distance meter. Unfortunately, this meter is not equipped with a thread for fixing it to a tripod. So I designed a suitable holder with 1/4" UNC thread which allows you to mount this meter on…
Adapter for CX-80 for LM10LUU bearings in Prusa Mini/MK3.9/MK4 Printed in PET-G, Layer Height 0.2mm Remix of CX-80 lubricant adapter for LMU08
I remixed the original Z axis carriage to add longer arms and an additional set of holes. I also opened up the bearing location by 0.1 mm. Clamps and Bearing Rod Supports are the same as the original design but presented here for…
Customized version of http://www.thingiverse.com/thing:120441 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=120441 Instructions Using the following options: outer_diameter = 12.3 split_bearing = No…
I needed it to build a Frankenstein bedslinger out of my printer graveyard's parts… well, it works well!
Soft mount with zip ties for a LM10UU brace below a heated bed
Z axis carriage substitute for using LM10LUU (long, 10mm linear bearings) in the Hypercube 3D printer. Use it in conjunction with this 10mm Z axis mod: http://www.thingiverse.com/thing:1950819 Category: 3D Printer Parts
This is based off Scot 3D's HEVO design Nut and bolt sizes are M5 not M3 - sorry I'm not a fan of the brass inserts so replaced them with nuts Have not printed this set out yet, waiting to complete my HEVO
This mods accepts very same priting and assembling instructions as the original Rook MK1. Instead use 10mm linear rods and LM10LUU bearings.
Among the regular maintenance tasks for a printer is the lubrication of its linear bearings. However, before applying new lubricant, the bearings should be thoroughly cleaned. This will remove old grease and any potential contaminants.…
Lüfterhalter wird in den rahmen eingehängt man braucht min 120mm abstand zum lüfter.Waagerechtereinbau Lüsterklemmen halter für 4qmm klemmen
Lüfterhalter wird in den rahmen eingehängt man braucht min 120mm abstand zum lüfter.Waagerechtereinbau Lüsterklemmen halter für 4qmm klemmen
This is based off Scot 3D's HEVO design Nut and bolt sizes are M5 not M3 - sorry I'm not a fan of the brass inserts so replaced them with nuts Have not printed this set out yet, waiting to complete my HEVO This version has replace all the…
