2,195 models
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Bohrschablone für Unterputzdosen und Hohlwanddosen Bohrschablone zum markieren von Bohrlöchern für 68mm Unterputzdosen und Hohlwanddosen (Steckdosen, Schalterdosen) mit Zentrierung in 68mm Bohrungen zum genauen Platzieren.. Die…
Here's some Star Wars day fun. Add a little style with an X-Wing inspired spool holder setup! RepRack, RepBox, and RepWinder Compatible. May the fourth be with you! Check out our Millenium Falcon version of this stand too! Bill of…
Yet Another 18650 Case? Well, yes. This one is special compared to the others on Printables in one respect: it uses inset metallic AA contacts (spring/plate) to help avoid soldering. Also, it has a variant that is specifically designed…
PLA Füllung 15% Schichthöhe 0,2mm ohne Stützen, ohne Rand
Die Schablone dient zum Test ob ein Brief maximal 0,5cm, 1cm oder 2cm dick ist. Deutsche Post restricts their letter sizes to a maximum thickness. With these templates one can check the maximum thickness allowed
Standalone name tag with the name Owen. Balance is good as long as it is undisturbed. If the furniture is shaken, will likely fall. 147mm in length 53mm tall 6mm wide 34 grams
Hey, Habe drei Bohrschablonen gemacht für Bundbart Zylinder oder Bad Garnituren. habt spass beim drucken und benutzten Hey, I made three drill templates for Bundbart cylinders or bathroom fittings. Have fun printing and using
Remove the broken clip Put the new one and glue the 2 parts
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…
Cyclone dust collector. Can be printed in two parts on the Prusa Mini! Bouth parts have a rim to be fitted together neatly. PrusaSlicer Files have all the necessary supports!
Cyclone dust collector for a 2.5" hose. Made to be as large as could be on a Prusa i3 mk3s. I used m3 hardware to put the top and bottom together but glue would work just as well. ¼-20's for attachment to the bucket. I put this on top of…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…
Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor. Print instructions You can place five pieces of this drybox on the top of the Prusa Printer Enclosure V2. Can be used as a standalone spool holder for Original…
Stuff you need to buy: -M3x20mm screws (17 count) -M3x20mm nuts (17 count) (Optional but suggested) -Kailh low profile switches (9 count) -USB encoder OR Arduino pro micro OR equivalent usb board that can act as a game controller -USB…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
This is a marble machine with a lift that lifts three (or more) marbles simultaneously, and releases them to three separate tracks. Two of those tracks are connected in series, so a marble will therefore alternate between those tracks.…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
January 31-2025 Version 4.1 released! Version 4.1 is released! minor mods and tweaks! November 26- 2024 Version 4 release! (note - v3 and v4 lower cone is the same(NOT V4.1!!) , only the upper inlet/outlet section is new so you can reuse…
Apple introduced the Magic Keyboard with Touch ID in 2021 for Apple Silicon computers rocking an M1, M2, etc. That's all well and good, but for those that preferred keyboards that are actually good, many resorted to taping Apple's…
Stuff you need to buy: -M3x20mm screws (21 count) -M3x20mm nuts (21 count) (Optional but suggested) -Kailh low profile switches (9 count) -USB encoder OR Arduino pro micro OR equivalent usb board that can act as a game controller -USB…
This construction is a logical continuation of one of the first options. The community likes it, apparently because of its low profile. It seems more stable. Our friend Der_Rudi asked to increase the gap for better throughput. Now it's…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
First Star Wars helmet of mine, modeled in Blender based of Battlefront II character gallery. Cut in three parts for easy printing and assembly with bigger printer (I use Ender 3 Max). For smaller printer additional cuts have to be made.…
I decided my Google home was a bit boring so designed him a BB8 Costume :-) If you haven't got a Home, then I've also included 'no speaker' parts so you can just make him as a model. youtube.com/watch?v=_-5x7baY81o Print instructions Can…
Version 3- new, even bigger and better cyclone dust separator! This is still a beta! thou it is fully functional! Assembly info and such will be added later, newer versions of the top cap may get uploaded ** note- will need a 300mm build…
This is a rework of my own model from thingiverse (from 2012). “cyclone to catch the spray while purging/cleaning an airbrush.” There may be some sputtering especially with airbrush nozzles bigger than 0.2mm. Prints without supports, a…
You can purchase DIY kits and fully-assembled devices from my store by clicking HERE This is a fully standalone device designed for the Meshtastic project (https://meshtastic.org). These models are intended for personal use only. DO NOT…
Also called a “Cyclone Dust Separator” or “Dust Collector”, I needed one but the ones available were too expensive. I printed it with PETG. I am not sure if PLA will work. The print is huge and uses up a substantial amount of filament.…
Another cool model found over at FacePunch.com. Cheers Jace
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I was surprised to find that this model does not come with the wall mount, same issue with the more…
Print your own clone army! By request of another Printables user, here's a Clone Trooper (Phase 1) skin for Soozafone's fantastic Mini 13 armature. The helmet is partially based on and remodeled from a model by Marr Velz on Sketchfab.…
I made this Lego Star Wars Kama for Lego Clone Troopers. I modeled this using SolidWorks. Check out my account for more Lego Pauldron's and kama's.
Dummy 13 X Clone Trooper Phase I Update 23/02/2025 : New CloneTrooper Phase 2 print profiles! Do you recognize him? Here is my version of the Clone Trooper Phase I These clone soldiers, created from the DNA of bounty hunter Jango Fett,…
After building /u/GermanDarkness 's Remix of /u/isrussell 's model I had a ton of new ideas to implement! I rebuilt pretty much everything but still used his strum bar and face buttons in this iteration. The end product is primarily made…
reverse modeled adderini. needs to be open to public for improvements. here it is
Need a custom adapter for your cyclone separator? Comment the required inlet and outlet dimensions and I’ll make and upload it for you. This 3D-printable cyclone separator efficiently removes dust and debris from your vacuum system —…
I made this cyclone separator. It consists of five parts, four of which were 3D printed. The last, the top piece, was made out of acrylic on my CNC router so I could see inside but it can also be 3d printed. In my test it worked…
Here is our all time favorite clone Medic!! i have remixed the model and added my own parts. the shoulders are a little hard to put on but if you put them on last it is easy!
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…
Check out a video about my project! I tried to use 3D printing to speed up production on a laser cutter. A simple cyclone separator that can be easily printed within 20 hours saves you money on bags and works amazingly well!
This is a remix of Christian's Phase 1 Clone Trooper. I have broken this down into 8 pieces so that it can fit on smaller build volumes such as the ender 3 (200x200) Edit: There was an issue with the back right piece during upload, have…
“CM3588 NAS Case Desktop Standalone” - pretty much this.
This is my version of the Prusa Mini. I tried to make an overall smooth design with integrated filament sensor, E3D V6 and without any visible wires. My Prusa Mini Clone was not cheaper than the original I just designed it for fun. The…
Cyclone dust collector for 100mm hose diameter. Print and bond the 4 parts together A mesh structure has been added to the cyclone3 component to prevent large debris from being sucked in. Please download according to your preference…
Ideale Hilfe zum anzeichnen von Unterputzdosen. Abstand von Dose zu Dose beträgt 71 mm. Durch die Nut kann die Schablone perfekt an einem Laserstrahl ausgerichtet werden. Seitlich habe ich noch zwei Flächen angebracht um eine Wasserwaage…
If you use the sliced helmet you will need to mirror it to get the other half.
5/12/2025 *Added step file Update: Made a smaller version that entirely fits on my printer bed. Tweaked the thickness of some objects. Added diameter indicators to the wheel mount pieces. Made a new slider for the smaller version that…
Fret Buttons in Action Note these are 90% buttons. Gameplay Footage This is my version of a clone hero/guitar hero guitar in the style of the Les Paul Gibson. My goal was to make the best possible guitar with no compromises. Please also…
This a a Dummy 13 Droidbait!!! that's all i can think of to say.😅
This is an improved version of my previous paint holder, having two advantages: a) can be printed without any support b) vallejo-paint bottles can be stored head down at all positions - this is especially helpful if the bottle gets close…
This model is compatible with the lego system.
AVM FritzBox Bohrschablonen, damit sollte es leichter sein den richtigen Abstand der Bohrlöcher zu zeichnen. Print instructions Support: no Resolution: 0.2 Infill: 50%
small fine mist sprayer ∅8mm connector (with ½" adapter)
——————- Notification: motorized lift 2021 edition (v4) is now available and includes improvements over the v3 model https://www.thingiverse.com/thing:4751904 ——————- This is the fully revised version of the motorized lift for marble…
Bohrschablone für Unterputzdose - 71mm Abstand Maße 300x80x8,5mm
Universal milling template for the production of a hole grid with a diameter of 19 mm or 20 mm. Detailed description and instructions can be found in the manual. The models of the necessary bench dogs with 19 mm or 20 mm can also be…
Parts for my 5 Inch quadrocopter build. The parts are for a clone of the GEPRC Mark4 frame: https://www.banggood.com/custlink/KvvEZ5HHEp Some of the parts should fit to the original frame, too but at least the front bumper won't fit…
This model is compatible with the lego system.
Cyclone Seperator for Festool Vacuums This is my custom version of a cyclone seperator for Festool vacuum cleaners. The goal was to build my own, cheaper version of Festools CT-VA-20, while maintaining the core functionality without…
Its a Dummy 13 clone Waxer
This Router Template can be used for router lifts and also clamped to your workpiece using Microjig clamps (14°). Inspired by Snibis_Toolbox thing:4078971, I further worked on improving and extending the design. All you need is 1x M4 nut…
For experienced makers. Remember this is a free file. Ready to get your socks sucked off? This is a handy dandy, print-it-yourself cyclone! If you are looking to upgrade your dust collection system, we highly recommend giving this design…
KDxGP BMCC - A BMC Clone Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! Instructions On the top/lid there is no hole for…
Also known as the “Full Bird”! The head of this eagle faces it's right, towards the Olive branches in it's right talon to symbolize always seeking peace but holds arrows in it's left talons to show preparation for war. The one's who've…
Want fine water spray but can't print a fine nozzle? This is using centrifugal forces from a cyclone to nebulize water so it can be printed. I recommend using PET-G as there is some water pressure involved - please use caution! 8mm ∅…
This project made it to official Prusa YouTube Channel They had no spare LEGO plates to insert into holes, so on video project is not completly finished, but overall you can see at least how the printed parts are made 🧡 Before you go…
Can be colored in a slicer for muticolor printing, painted, weathers, whatever youd like to create your own unique shields! 0.4mm nozzle 0.08mm layer height 2 walls 15% infill
Modified every model part from /u/isrussell to make it more convenient. Thanks for the original models/concept! The body and fret board now use M3 screws for everything. I recreated all the buttons from zero, you can now slide over them.…
No need to explain, all is in the title. Based on Voron Stealthburner for Bambu Lab X1C/X1 Hotend by MrTelip Changelog : Update 12/11/2023 : - Too many versions ! attempt to simplify choice table - Fix airflow for “clone + std V6 nozzle”…
I've tidied up this helmet and smoothed it where possible. I've added the extra ear piece and if you sand the nose a little, remove the visor and or change the mohawks around you could theretically change it to any model Clone Trooper you…
This is a 3D model of 3D Touch a BL Touch clone. Project contains a .stl and .ipt files and the model was drawn in Autodesk Inventor 2021.
For those of you who like to go the minimalist route... From the same designer that brought you all the popular Hero Me remixes... MediaMan introduces the The E3D Minimalist. A simple, clean, lightweight, yet strong mount for your…
A cheap and easy to build Nanoleaf Lines clone. The DIY Nanoleafs are powered by WLED providing a webinterface, smart home integration, countless effects and many others. Like the original one, individual patterns can be created. Multiple…
Here is my take on the Lego Star Wars blaster! This model is scaled for 1:1 (cosplay accessory / prop), 1:6 scale (12 inch action figures like Hot Toys / Sideshow) and finally 1:12 scale (for 6 inch figures like Hasbro Black Series /…
This is a star wars data pad phone case I designed to make my phone feel “in universe”. edit- I got around to printing it, and the datapad just feels bigger in hand than I thought it would be. I'll probably tweak the file and make it a…
Here is my attempt to make the clone rifle as seen in the shows Andor and Mandalorian season 3. I have done my best to get this as accurate as possible with the limited reference available. This rifle is scaled for 1:1 (life size for…
***UPDATE 9/6/24*** Added a proper cover designed to be used with the Silicone cover for the Cardkb. ********************************* This is a case to build a stand alone Meshtastic communicator using the Heltec ESP32 V3 and the M5Stack…
Found this file on the internet a couple of years back with the intention of improving on it. With very little time and a ton of other projects I'm hoping some one with the skill set out there will improve on smoothing the shape and…
This project is still in development. Final version may be finished in few months. If anyone instested to print it and build it before in test version or modify files for personal use - you can use Fusion and modify internal parts as…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Cyclone Dust Collector The Dust collector main body fits perfect on a Prusa MK3 Printbed. Update 03.03.2025: Os Vac Neo M32 Intake and Outlet Adapter Update 25.01.2025: Os Vac Neo F32 Intake and Outlet Adapter 35mm, and 38mm outer…
These are all made by my and scaled for lego minifigures. They are based of star wars weapons for clone troopers and droids. Some need to be assembled. One of the blasters has an optional barrel attachment. I hope you enjoy!
Das ist ein Unterdruckventil für einen Zyklonabscheider. Es kann mit Hilfe der Feder eingestellt werden und verhindert das implodieren eures Sammelfasses. This is a vacuum valve for a cyclone separator. It can be adjusted by means of the…
PLA oder PETG mit 0,4mm Düse und 0,1mm Schicht
Another model from way back in my uncompleted folder finally completed : ) Cheers Jace
This is a parametric dust extractor designed with a small shop in mind! The included STLs are ready for a 45mm hose and mount to the dust bin via 6, 5mm bolts.
A case for the PCA9685 16-Channel Servo Driver board from adafruit and its cheap chinese clones (see note below). The bottom part comes in two versions: a plain standalone version and one with connectors for the fischertechnik…
This model is compatible with the lego system.
Simple Guitar Hero wall mount. I designed this because I found that there wasn't many other options out there and the other ones all weren't strong enough for me to trust them to not break. It is designed to use two wood screws to fasten…
This model is compatible with the lego system.
This is a set of pieces that can be used to recreate a Clone Trooper, 501st Legion figure at 500% scale. This figure was released in 2020 and included in two sets between 2020 - 2022. All of the stl files needed to create this have been…
Credit to the hardworking guys in the Voron Community for the Stealthburner https://github.com/VoronDesign/Voron-Afterburner/releases/tag/sb-beta0 Design is license under GPLv3 as per Voron license…
Wargame Building Terrain - Stand Alone Building - Group Three! Complex stand alone building with floor! Complex stand alone building with floor and slide in door! Complex stand alone building with No floor! The empires of the future won't…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
pieza de repuesto o extra para las guias de teflon del ACE pro o otros equipos que requieran acomodar 4 guias. recomiendo imprimir en petg traslucido, aunque cualquier material es de utilidad agregue un nuevo modelo con algunos ajustes
![GEPRC Mark4 Clone Frame Parts [WIP]](https://media.printables.com/media/prints/98925/images/1000844_bc4bd012-487e-4951-9d7a-7ab5d18e3c8e/featured_preview_quad.jpg)
