Counting matching models…
Cylindrical Stackable Containers: Organize Your Loose Items with a Twist Download the Compatible Modular Sorting System - HERE - Product Description: Introducing the Cylindrical Stackable Containers, the ultimate solution for organizing…
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Live in a very humid environment and must store all filament away from moisture. The simplest method is to store the filament spools in ziplock bags. This container holds loose desiccant and can be place in the bag with the spool to…
Print approx. €1.58–€1.94 excl. taxPreliminary estimate for one variant
Description There are a lot of different opinions about the use of Igus bearings in 3D printers. However, I have decided to use my Prusa MK3S/+ with the only logical combination of fixed and loose bearings and have had very good…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for PETGSource material: PET
This simple fix stiffens up the visor mechanism on early Schuberth C5s and S3s. However, the mechanism has been redesigned and can be fixed by your importer, so I'd recommend you have that done. If for some reason you can't, this is a lot…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
2" Back Flap Loose Pin Hinge For Theatre - from the original by J. R Clancy of Syracuse NY. Created by me in Fusion 360. Used as a demonstration item for my drafting students. I printed the body halves at 0.1mm and the pin at 0.05mm
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
After getting lose speaker holes on the cover i decided to design those PETG slot to make the speaker holes stronger as the cover is flimsy and makes the holes not straight. Print them not too fast as they are small, then glue them with…
Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
Single & Double you can bent over the loops and stack a different ammount of paper together. scale in Z for more capacaty. replaces common paper binder with metal flaps or paper clips. Print Settings: Printer: Prusa i3 Material: PETG /…
PLA / PETG 0,1-0,2
I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…
These stackable tea dispensers hold 25 teaspoons of your favorite loose tea and dispense them one teaspoon at a time with each pull of the sliding “drawer”. The last cross-section photo show how the slider cavity fills up when the slider…
Hang-loose or call-me hands for DUMMY 13. 2024-05-10: Updated to add webbing between thumb and palm for a more natural look.
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
Nature Wall Art with 2 deer and 3 mountains The full model is 600mm wide, 300mm high and 3mm thick. There are also pre cut parts so it can be printed on smaller printers 200x200 and can be assembled later. I suggest assembling with glue…
Has your Dummy 13 been “Chalk Lined”? Too weak in the knees to even stand up? After printing your Dummy 13 or other articulated model, you may have a loss in stiffness of the model when the 3D printed joints wear or stretch. This can…
I wanted to do something to increase a safety on roads... So I upgraded and remodeled a Loose Wheel Nut Indicator to everyone, who have a truck, delivery truck, trailer or big pickup. I remodeled a great model by FullSendFab from…
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
I need a much looser insert for the HSW cells in my remix of the top cover for the ad5m printer enclosure. There is no way to push them from the other side so the inserts should be looser. hex wall-to-wall 19.7mm
I created this box to store my loose chilli seeds. In order to protect the seeds, the box is almost opaque (depending on the filament). Dimensions in mm (single tray) Inside: 42,8Lx22,8Wx20,8H Outside: 50Lx30Wx30H Wall thickness: 3,6 I…
This is an alternative peg for the Modular shelving system. The original peg was very tight on my printer and required some hammering to get into place. They were also very hard to remove without damaging the containers. This peg is just…
Here is a simple strap keeper that can be used as a replacement part for securing the hip belt on backpacks. It ensures that loose, excess strap ends are neatly held in place. I've designed various models for straps ranging from 20 mm to…
Print-in-place ratcheting capo design from Mikolas Zuza. Print the optional sleeve from tpu or wrap the arm in electrical tape.
Ein Set von verschiedenen Passungen der Stößelaufnahmen für den Ventilblock. Mein Problem: Bei mir ist es vorgekommen, dass mit Schwankungen beim Druck der Ventilblöcken manche Stößelaufnahmen-Dichteinsätze bei PETG von Firma XY gut,…
Update 7/8/2022: I adjusted the scaling down uniformly to 65% scale in the Cura slicer and printed at 0.20 layer height using 100% infill. It took 1:52 minutes to print (80mm/s print speed, 40mm/s wall speed, and 100mm/s travel speed). It…
I just made a already vary nice design into a keychain
When I started this project I didn't really think it would work well, but since I still had one or two linear rails left, I allowed myself the fun. But this mod is for people who have the necessary fingertip feel because everything has to…
This is a replacement shade ring (nut) for standard E14 lamp sockets (M28 thread). I designed this to be a bit beefier than the original stock rings, which often crack over time. I also designed it with looser tolerances than many other…
works with the cover and captures more desiccant, no supports needed.
I have noticed many people having problems with the USB-C port on the back of the T598 Wheel being loose/breaking off. It's best to contact Thrustmaster for a replacement, but I wanted to make something that would secure the cable…
Description: This file provides a solution for the common issue with the Jucoci Miniatures Storage Case, where the middle trays often fall down, potentially damaging models due to their smaller width compared to the box. Over time, the…
Fun print and great model. 15 segment, loose fit. Penny for reference. This is a reupload of Fidget Worms by DaveMakesStuff at thangs.com. "These print-in-place Fidget Worms are hard to put down! When you do manage to put them down, use…
Perfectly measured tea, every time: Never again will you have a pot of tea that's too weak or too strong. This spoon measures exactly one teaspoon of loose leaf tea, ensuring a perfect cup every time. No glue, no mess, no fuss: This spoon…
I'm always on the lookout for some new useful thing to print, and just yesterday I happened to notice the little black tool in this Instagram post from Stan's NoTubes . Clever little tool to help remove a Presta valve nut from a tubeless…
Printed vertically wo any supports, worked great.
This is a remix of the Portable cable winder with larger gaps between the print in place parts.
For when a NEMA-15 style plug is a bit loose, you print this out of any material and it sits in the outlet and adds friction which lets it hold in place. I had the problem of loose outlets on planes (that are also angled DOWN) so I made…
This is a remix of elegant adapter designed by Pavel Hrčiak.
0,1mm thinner pins on the jaw for a better fit
I found myself extremely annoyed with the plastic/metal wires that keep your tea bag closed. The wires either snaped after some time or I pricked my fingers with those pesky things. That's why I created this simple contraption. There are…
I want to add my own custom notebook/journal page into A5 ring binder notebook but can't find the easy way to do it. I have Muji and Kokuyo binders so I design the jig that will work for both. This jig should be working with a 6mm single…
An anti-binding, loose-fit Bowden clip set for the Creality K1, K1C, and K1 Max. Designed to gradually transition the PTFE tube from the elevated toolhead entry down to the lower cable chain level, these clips eliminate tube binding and…
This is a remix based on jcolega's "LEGO Dimensions Display Hexagons" which work really well. That design has a satisfying snap of the Dimension Medallion into the hexagon. But I still play the dimension game with my kids. So the snap fit…
Loose Tenon Mortiser This is a simple loose tenon mortiser jig for a handheld Makita type of trim router with a diameter of 65mm. It is inspired by the Festool Domino and a number of more or less cheap ripoffs I’ve found on cheap chinese…
The bolt was designed with a large tolerance of about 0.45mm so it can be printed on pretty much any printer. My Ender 3 has absolutely no problem printing it. Settings Supports: None needed Infill: 5% or more Layer Height: Any It can be…
Update (Same day as published): - Added versions with higher walls for space for more cable. - Added a version with threads on the edge and a thread connector to connect more spools together Print halves with sort of the same name and…
You are doing me a big favor by clicking the Like button :-) Tool to loosen MC4 connectors for solar panels
Simple stackable tray. Print with zero top or bottom layers and adjust infill (obviously grid is my choice) to get different screens on the bottom. I came up with these after accidentally dumping a good amount of loose desiccant beads on…
I wanted a jig to use with my DeWalt DCW604 hand router, to be able to make floating or loose tenon joints (similar to the Festool Domino tool). My router came with a 17mm collar, so I made the jig to fit that, and for inserting 5mm…
A quick-printing snap-together spool for eSun's "Refillament." It sucks that, every time you buy filament, you're stuck with this absurd non-recycleable polystyrene spool that you just have to chuck in the garbage to be carted off to a…
A replacement shroud for the Rush by shoelesshistorian. It features M-LOK slots on the sides and is compatible with both metric and imperial hardware.
The original treasure chest puzzle box was a great design, but having to sand the parts was a drag. So some of the interfacing elements were tweaked, and now sanding is no longer required. Note: the top frame may not be a tight fit with…
The original slot provides almost no clearance for inserting the square nut into the extruder body.
I loved The Goofy's loose filament spool, but it was too big for my MakerBox samples. I remixed it to be small enough to fit the samples I get every month. The Goofy's one fits a 140mm diameter filament sample at its smallest. Mine fits a…
Original ones didn't work well with my ender 3 pro and kobra neo. This part is edited for 0.4mm nozzle for easier printing on cheaper fdm printers
Insert was designed for a 19mm diameter wedding band, but the print is flexible enough to adjust for other sizes. Printed in natural PETG and is virtually invisible on light skin tones. Supports are required.
Flexible filament only. LICENSE: NON COMMERCIAL prohibida la venta de modelos sin permiso del autor // the sale of parts without the authorization of the author is forbidden Category: Vehicles
Having Printed the bit holder from Nukapanda I found removing the bits to be quite difficult. This is an edited version of their design that is based on figterk ' s design. This version removes 6mm material from the top, bottom and sides…
it good with my flashforge 5m and turned out perfectly due to my improvements of this fidget
Store your sample filament and prevent it from unwinding itself. There are two holes to set both ends of the filament, fit for 1.75mm filament. There are two versions: 40x20mm, 25x20mm.
I have Shimano disc brakes with BL-M315 brake levers. The levers were loose and rattling, metal on metal, every time I hit any bump. I designed these simple spacer shims to reduce the looseness and unwanted rattle. They fit the M315…
On my printer, loosening the two springs in the print head gives easier, smoother movement and better shaper graphics.
The hinge of my Xiaomi Mi Desk Lamp 1S has loosened up and the arm slowly slides down over time. This lamp is great, but unfortunately, I don't think there's any way to tighten it up. This small clip slides in to hold the lamp in place at…
I wanted to keep my desktop work area clean and did not have any storage bins to place my small 3 ft cables in. So I designed a simple under desk organizer to store away 5 cables that I use most. Updated with 6 cable option. You will need…
LISA SIMPSON - LOOSER - WALL ART
Tool to see what the margins of the printer and the used filament are in order to create perfect press/tight/loose-fit parameters. Update 2023-05-20: added 0.05 offset to Window and to Pin
I really liked Sy's Peglock system, but was tired of scratching and hurting my hands trying to remove the board attachment. I don't mind a little wiggle room, and I don't need my mounts to be so sturdy that I can't move them. So, I scaled…
I made this clamp for my slingshot bag where the strap was hanging loose. So i remixed my own other thing to hold the strap together. Clamp width small one is 30mm and hold thickness of 3 mm Clamp width big one is ~39mm and hold thickness…
This is not my original. I couldn't upload it unless I selected it as such. Thank you @hangloose for letting me share this! I use this connector to connect the 3 phase wires for a brushless motor. I used @hangloose's design and slightly…
Shallow Gridfinity bin for loose tools. Bin fits in a 2x5 gridfinity footprint and is 3U tall. All four bottom edges are slightly rounded to allow for easier retrieval of tools. The black model in the photos was printed with Polymaker…
This is a simple remix of the DNA playset by emmett with looser joints for those that have trouble printing the original. Includes the stl files as well as the modified scad. To cite the original source: «... This is an accurate…
This is a remix of this hook: https://www.thingiverse.com/thing:2781654 I thought the fit was a little too tight on the pegboard, so I moved the pin down 0.5mm to create a little bit looser fit for when I want to relocate it. Print…
A practical and durable pill-crushing set designed to simplify the preparation of medication. The main crusher uses a threaded press to smoothly break tablets into a fine powder, making them easier to swallow for both children and adults.…
This is a looser fit version of @skelly's great model of a Gridfinity Gorilla Glue holder. I simply remixed the file for the hole to be a bit larger so the bottle pulls out smoothly.
Gridfinity 3x2 Bin for small stapler, staples box, and loose staples. Can be printed without supports.
Print face-down. You can get the spacer from the original upload.
Fits lighters with a smaller than 14*26 base
2x1 Gridfinity AA Battery Holder with loose fitting battery holes (15.25mm). Ideal for easily pulling out batteries from a bin that usually stays in place, not ideal if you are going to be moving the bin around a lot and want the…
Thanks to https://www.printables.com/@mkoistinen for uploading the source so I could modify it!
i came here looking for exactly this and didnt find it, so as per usual here it is. For either myself in the past, or anyone who already as a bunch of 8" long sideways boxes like i do. if you want it for bigger sleeves a scale up by a few…
Keep your Nextruder nozzles neatly organized and always at hand with this custom holder for the IKEA SKÅDIS pegboard system. Capacity: Holds up to 6 loose Nextruder nozzles (without packaging) and 8 nozzles in their original packaging.…
This is one of my early designs of about 4 years ago. I wanted to hold small coils of filament of a limited size range, with easy loading. This was done in Fusion 360 before I learned to use components, so it has separate designs for each…
If you enjoy my designs and would like to support my work, or get a commercial license to sell prints of my models — you can join me on Patreon: 👉 https://www.patreon.com/cw/AR3DP --- This model depicts the Appaloosa in an expressive…
As other comments said, the original hinges were too tight, the curved part is a lot thicker and unfortunately the print snapped from the bolt end on the first try while locking. Didn't use "OuterHingeDoor.stl" altogether, but took the…
This is an original design. If you use loose coffee grounds in your Keurig K-cup this cork screw can help remove the loose grounds quickly. I've been using this for years so its been thoroughly tested. The cork screw part is designed to…
hot wheels wall mount loose open I designed the model myself, all in blender
3D model van het efteling dak loos bord
Wollte einen kleinen Container für Silica-Perlen um mein Filament trocken zu lagern. Der Deckel ist Lose aufgelegt und kann (falls notwendig) mit Klebeband fixiert werden.
I Had a problem, I had a lot of loose filament I didn't want to throw out and no way to store it. So I made this box. If you're like me and prefer to keep useless filament you will never use this is the box for you! I printed the bottom…
Kann ohne Stützen gedruckt werden Geeignet für losen Tee. Für unterschiedliche Tees können verschiedene Filamentfarben verwendet werden. Die Abschrägung in der Innenseite verhindert, dass Teereste beim umkippen hängen bleiben. Die Modelle…
Any print settings are good, but you might want to flip it upside down.
This is another spool for loose large filament coils that I designed about 4 years ago. The pieces push fit together. It works OK, is fast and easy, but is a fixed size.
still don't know exactly why i designed it, but maybe it come in handy
My wife asked for a nail polish tray that would keep the larger bottles of polish she has from sliding around in the bins she stores them in. This was the result and she is very happy. I printed it with creality silk filament 1.75 at 225C…
Hello everyone, I had the problem that the laces on my inline skates were very tight. In order to loosen them after skating, you have to put your fingers under the laces, which can be painful if they are tight and you do it several times.…
A simple remix to add a glass window to the dispensers
A set of beautiful boxes for storing loose leaf tea. Outer diameters are 75mm × 75mm × 75mm Features: Prints completely without supports Each box has a unique locking mechanism Models are exported as combined objects, before printing make…
I basically pushed back some of the inside surfaces to create less friction when the button slides back and forth. It is also easier to snap together now.
This was a fun project - I wanted to make storage containers for tea where you could interchange the labels as desired. I've included a lot of the pre-made labels already as well. PLA/PETG is fine I highly recommend using a .25 nozzle for…
Original slot has almods zero clearance for inserting the square nut in the y-rod holder.
