Counting matching models…
I bought an Alps Mountaineering dining table from a thrift store for cheap, because it was busted. the plastic mounts that hold the table slats to the frame get lost easily, and while you can bend the edges of the slats inward to fix…
Made this for my mother and her Bible study friends for Christmas. You can download the stand here. https://www.printables.com/model/1063406-sign-stand Updates January 27/25 - Updated files and Printer Settings Printer Settings…
This is a riser/spacer for the bottom of the vacuum near the roller to replace the stock thin one with a thicker one to create more space/less resistance on the roller. I made it because my belt on the roller kept slipping on thicker…
This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate. Each plate is 1.5 mm thick. The middle hole uses the starting…
Help your child discover the joy of reading with this set of three specially designed reading focus tools. Created for early readers, children with dyslexia, attention difficulties, or autism spectrum disorders , these simple but…
Wire Grommet: While doing mods I noticed the opening from Heated Bed MOSFET compartment to Mainboard the Wires are resting on a sharp edge of metal from the PSU with all the vibration of machine this area has potential to cut wires cause…
I printed it in Silk PLA with 0.2mm layer height, 0.4mm nozzle, and 20% infill. I recommend 0.2mm layer height as the model is 2.8mm tall and needs to be that tall.
Intro Can’t make up your mind? This fun Decision Maker is the perfect 3D-printable tool to help you choose! Whether you’re deciding on coffee or tea, work tasks, weekend plans, or what filament to use next — just give it a spin and let…
Dle platných norem na provedení hromosvodu, musí být každý jednotlivý svod ze soustavy do země označen pořadovým číslem aby byl při revizi jednoznačně identifikovatelný. According to the valid standards for the design of the lightning…
A mold to create your own alp relief of the Nagelfluhkette.
This template can be used to recreate the rubber feet on the Standard Apple ADB keyboard MO116. Best fit I found was 0.8mm rubber sheet with a thin double sided tape on one side to attach it to the keyboard after cleaning the old guu off.…
Made this for my mother and her Bible study friends for Christmas. You can download the stand here. https://www.printables.com/model/1063406-sign-stand Updates January 27/25 - Updated files and Printer Settings Printer Settings…
I modeled the holder for my wel-bilt screwdrivers… Phillips and Flat. It is pegboard compatible or screw it to a wall. Enjoy! https://www.northerntool.com/shop/tools/product_200579893_200579893…
Is capable of holding singles as well as single and double LPs. Easy to screw onto walls and get level due to screw slots. Fits normal 4mm countersunk screws (I used turbogold). No supports required, print in orientation in photo. Enjoy!
Mountains around Zermatt with all 4000m indicated (38 of 82 in the alps !). An 1mm hole is integrated in project to place a paper clip with the name File given is with variable height 200um down to 50um, is very long to print. You can…
Wanted to make these for a family member and decided to post them online for everyone to use. They are made a bit larger than normal to give room for larger necks so you can make them a bit smaller if you want. These include: Normal and…
I designed two vinyl record stands, one holding 20 LPs and another holding 33. The 20-LP model is sturdy and spacious enough to accommodate double albums, while the 33-LP version is more compact and fits mostly single LPs. I'm new to 3D…
The CT-LPS-T35 right-angle 3.5mm connectors I have came with caps only for 3mm cable diameter. I designed these to be able to use larger-diameter cables. Included are variants for 4mm and 5mm cables. Since they're very small I recommend…
I made these to add a bold look to my old Epiphone LPS2 (named Vör) and designed a new pickguard to accomodate the addition of a 3rd humbucker. The selector ring should be printed with a different color for the first layers to get the…
I needed something to hold up my LPs, the previous thing wasn't working, so i started up tinkercad and slapped this together real quick..
Stack able box send me a coffee @ http:\\ ko-fi.com/capcoffee78
Additional parts needed 1x 2mm stainless steel rod with 51mm length 1x steel spring 3.8mm diameter, 24mm length Post Printing Remove supports carefully, if the mechanism doesn't slide freely in the metal parts, use a small file to gently…
Title: Center Marking Tool for 21700 Batteries – DIY Battery Building Aid 📝 Description: This simple yet effective tool helps you mark a perfect center dot on the negative or positive terminal of any 21700 battery. Ideal for spot welding…
ALPS Switch Conversion Plate for Atari CX-10 Convert your Atari CX-10 joystick into an Alps-switch joystick! Choose between two plates: What’s Included CX10_Alps_High.stl — raises switches for instant clicks , but more sloppy (will press…
Need to add Heat Set Inserts from flat face to Fit the 3mm bolts supplied with Hub, you will need an additional 4 of these bolts to bolt adapter to motor.
Adapted from this model on GrabCAD : https://grabcad.com/library/alps-fader-knob-leever-4x1-2mm-1 Modified to allow for easier 3d printing by removing some useless void space and adding a small tolerance to allow it to actually fit to the…
Bandeja sencilla, porta púas, o simplemente para decorar el estudio ;)
Encoder knob for my MB-6582 groovebox, and more ergonomic replacement for ALPS knobs. Adding FreeCAD and 3mf sources. Go fancy with Flex 93A( green glow effect) and you'll never miss the beat in tha club ;)
Encoder knob for my MB-6582 groovebox, and more ergonomic replacement for ALPS knobs. Adding FreeCAD and 3mf sources. Go fancy with Flex 93A( green glow effect) and you'll never miss the beat in tha club ;)
Dragon Burner remix to fit Alps hotend from Mellow with module. Rest of parts for extruders can find in original place https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner no, its will not work with Dragon UHF, its sorter how…
Confirmed good fit with PLA at 0.1mm and 0.2mm resolutions, 100% infill.
update 7/6/2026 added the normal dragon burner toolhead, slightly do configuration since i broke one of my alps sensors so i ordered a new one, but accidentally got the one for the goliath hotend rather than for the heatflux. the…
Customized version of https://www.thingiverse.com/thing:468651 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=468651 Instructions Using the following options: key_length = 1.75 key_height = 1…
IKEA ALPSTUGA alternative housing with some nice to have features. This alternative housing introduces wall mounted option, a battery option to keep it operational during outage or to use solar panel for power! It's your call! You are the…
Description This simple mount allows your IKEA ALPSTUGA to be placed on a monitor, tv or similar object. Parametric Fusion 360 file is included. Different stls for different monitor thicknesses are included. Printing Instructions Print it…
Cover for the Ikea Alpstuga air quality sensor. The display can't be turned of and is too bright for a bedroom
This is a riser/spacer for the bottom of the vacuum near the roller to replace the stock thin one with a thicker one to create more space/less resistance on the roller. I made it because my belt on the roller kept slipping on thicker…
This is calibration print to determine perfect cutout sizes for 3d printed keyboard plate. Print and test switch fit. Adjustment value can be used when generating final plate. Each plate is 1.5 mm thick. The middle hole uses the starting…
Help your child discover the joy of reading with this set of three specially designed reading focus tools. Created for early readers, children with dyslexia, attention difficulties, or autism spectrum disorders , these simple but…
https://deskthority.net/wiki/Alps_SKCC_Cream There are two models - one with the full detail of the original part, and another simplified for easier reproduction. Both should be functionally identical. Category: Replacement Parts
https://deskthority.net/wiki/Alps_SKCC_Tall_Cream There are two models - one with the full detail of the original part, and another simplified for easier reproduction. Both should be functionally identical. Category: Replacement Parts
Replace missing keys from your ALPS-style Apple II keyboard with commonly available Cherry MX-style keys. Category: Computer
Replacement adapter for the "ALPS Short Stem" keyboard switch for the Apple II or II+ See the pictures or this archived Apple documentation for details: https://archive.org/stream/DTCA2DOC-223_repair_IIe_1989#page/n53/mode/1up This is the…
This custom LPS cat model 3D is designed for collectors, fans. Suitable for display, painting or customization projects.
Small holder to mount your ALPSTUGA on top of your monitor. No glue or hardware needed.
NOTE: This model is to be used with the back and bottom plate of this model: Have you used Mellow ALPS heatcore 4 with your EVA 2.4 and Mercury One.1? Then you must know that it is too long and therefore not supported by even the UHF fan…
just didnt seem to find a sea cadet name and logo and makde it myself hope this helps someone out
A4T cowl for using Mellow Heacore 4 UHF (No ALPS module) + hotend fan duct Only for Ortbiter 2-2.5 and XOL carraige Use the same print settings as listed in the A4T GitHub Page Need to use the Orbiter 2.5 extruder adapter that is in the…
Famous Art - Napoleon Crossing the Alps by Jacques-Louis David - 1801 3D printable model.
A version with the back filled in for printing without bridges. Category: Physics & Astronomy
Mellow ALPS: https://aliexpress.ru/item/1005011610938214.html?sku_id=12000057522107054&channel=choice
A simple tool to open up Alps and Matias keyboard switches. You'll probably want to print my new switch opener tool instead of this one: https://www.printables.com/model/201337-alps-switch-opener-v2
This is a much faster and more effective tool for opening Alps switches than my first attempt . Even very dirty switches, which are quite difficult to open using the toothpick method or my old switch opener, aren't a problem at all.…
The main part can be printed entirely on prusa mk3. Designed for the Gledopto controller, LED profiles and the power supply shown on the images. Light can be controlled from the Philips HUE app You can choose between: RGB and White Led…
I had a bunch of Alps switches and needed arcade buttons. Category: Video Games
I designed this to use an M6 bolt with a spring. Category: Video Games
These are little tools to remove switches from mechanical keyboards plates. The shell goes over the switch bottom housing and pushes on the little retaining clips, the slider goes in the shell to push on the switch and release it from the…
Simple wheel for the uncommon Alps EC40 encoder, press fit and open top to allow stuff to pass through.
Modelo defectuoso pero suficente para placa amplificadora de audifonos acompañada por los componestes disponibles en tienda local de electronica y otros elementos aleatorios a la mano Considerar solo como un modelo base para hacer sus…
Here is the version for MX Switches https://www.printables.com/model/135614-plate-fork-cherry-mx
For using as a moisturizer, add a small absorbant sponge, pad or several layers of paper towel. For use as a dryer for something like a filament dryer, simply add your dessicant and close the lid.
A small clip which allows P1P owners to hang the side mount spool holder by wpbhelps on the side of their machine. Along with a clip that hooks onto the next bar down to help put the spool holder in a better alignment. Also added a ptfe…
So I didn't want to go ATX they are just 12V and since I've replaced my ender supply for MeanWell I've decided to put the old supply to good use. It's designed to print on face with no supports. There are legs at the bottom to make it…
This set is identical to my Cherry MX-compatible keycap set (https://www.printables.com/model/397180-complete-cherry-mx-stem-keycap-set-optimized-for-3) but it was generated with Alps stems. Below is a copy-paste of that model's…
Keychain to hold an Alps/Matias keyswitch Print instructions Category: Keychains Summary Keychain to hold an Alps/Matias keyswitch Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
WARNING! You have to have no stringing! This model contains narrow gaps. If they are clogged by strings, it won't work, or it'll require a lot of cleanup. So dry your filament and test your stringing before you blame me. Or print on a…
Looking for a quick and easy way to customize your EC11 Alps encoder knob? Check out these Encoder Knob Model designs, now available on Printables! These designs allow you to create your own unique encoder knob, whether you want to add a…
Have you ever had these little monsters (Littlest Pet Shop) everywhere on the kid's room floor? Was it impossible to walk anywhere even if you cleaned them up somewhere in a box every day... again and again? Then you might want to install…
Modular accessory mount for the ALPS Mountaineering Camber Chair. This is a comfortable camp chair but it was missing a much needed cup holder. I designed a mount that attaches to the chair, along with accessories that slide onto the…
Thrustmaster Warthog Slew Stick Mod. Models and STLs for use with instructions at https://github.com/ServError/Thrustmaster_Warthog_Throttle_Alps_Slew_Mod
This design is rather simple to print where one side gets screwed onto the main side. No supports required to print this. This is useful to organise all your cables. 10-15% infill PLA.
Case for pocketlab thermal early version. Helps protect the PCB Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: 0.2 Infill: 30% Filament: MatterHackers PLA var Notes: Case for pocketlab thermal early version. Helps…
Support for the ALPSALPINE RKJXU joystick. It features two holes for mounting the joystick with two M2 screws. I suggest printing with a resin printer, due to the small size and little dents and holes. I attach the full 3D model so you…
3D model of Dachstein surroundings. The height is 2x multiplied. (The model has a high resolution and can be printed much larger.) Print Settings Printer: Molestock Rafts: No Supports: No Resolution: 0,2 mm layer height Infill: 16%…
This Tiny Tower helps you print good-fitting parts. No more need to print multiple gauge blocks to find the required clearance. Tiny Tower does it in 2 parts. A 5.7 degree taper angle works like a magnifying glass. It magnifies the…
A great small thing! With this, you can set your plants at the exact hight you want them to be in the pot! And it also helps the plant not to stand in water. Important information: The models can be easily scaled to the right hight by…
I tried to reproduce the number row keycap from my Apple Extended keyboard for trying to print with PETG, painting keycaps and making some test. There is 2 base fusion 360 models that you can change and learn from and 3 STL variations.…
This is a lube station for Alps SKCL/SKCM series Actually this is usable, but maybe to much flexible. Also there is a « test » file to test the fitment before printing the whole part. Considering that this is a file from a previous…
Important notice Thoses models cannot be used with a Apple Extended Keyboard ISO version (e.g. The azerty one). All the switchs location are shifted and required both different plate design and case design (Holes aren't compatible with…
Low Profile Spoolholder for sidemounting to the bambulab AMS. With the bowdenconnector it adds just 34mm to the AMS in width. Fits spools from 140 to 200mm diameter. Never unplug the AMS again when printing from an external spool.…
Keycap with the Commodore logo on it, for ALPS keyboard switches
A small device to hold in the clips on the underside of Alps switches to make it easier to get them out of plate. Push the device on to the back of a switch and press a pencil or pen through the hole. Bam!
Parametric model (using Fusion 360) allows sizes to change. Total length is the key.
Onshape model is available for customization (there is a variable to make the rail thicker). Stopper is simply inserted into the holder on the required side, if you need it.
Designed to be printed without supports, flip the 3D model file upside down.
A quick modification I made to the stock idler mount for the Y axis that helps keep the idler perfectly horizontal and aligned to the belt by using two alignment tabs on the top on bottom of the part. These take up the slack that can…
DEPRECIATED: I have a new page for a complete redesign of the Y axis belt components for the MK that better accomplishes what this model can't do alone: MK4 Y Axis Overhaul - Reduce Vertical Artifacts on Your Y Axis by KyleTW | Download…
My Daughter asked for a toy camera to play with her LPS toys and I whipped this up. Uses 3mm filament for the legs, should print without supports. Print instructions Category: Toys & Games
