Search results: m30x

Counting matching models…

Printables

Protection d'éclaboussement M30x1.5

Diamètre extérieur bas du cône = 100mm. Epaisseur de la paroie = 5mm. Hauteur du cône = 200mm. Filetage = M30 x 1.5mm. Matières utilisé = PETG

Order a print of this model

Printables

Reich thermostat adapter M30x1,5 Pin for Smart Home

Hi, This is the adapter pin that is needed when using the Reich thermostat adapter from thingiverse (https://www.thingiverse.com/thing:5543784/). This one is adapting the Reich thread to a 30mmx1,5mm thread. Because of the lenght of the…

Order a print of this model

Printables

Abschlusskappe Thermostat Gewinde M30x15

Deutsch Um einen Heizkörper in unserem Haushalt stllzulegen, benötigte ich eine Endkappe, mit der ich das Thermostatventil ersetzen konnte. Die Kaufoptionen waren mir zu teuer, also entwarf ich ein Modell, welches mir gefiel. Es hat ein…

Order a print of this model

Printables

Audio Technica ATH-M30x M50x Headband

I just wanted to make my M30x immortal so yeah I tried printing this out of a bunch of different filaments but I found that PETG is the best material for it. So far I tried random PLA+s, ABS+s and PETGs Most PLA+ lasts around a month,…

Order a print of this model

Printables

M30x1.5 spool holder

The main screw body prints parallel to the build plate for strength. The diameter of the screw is 30mm (M30x1.5). The round tube to cover the screw has outer diameter 32.4mm. The hex nut has outer diameter approximately 52.5mm. The…

Order a print of this model

Printables

Heizungsadapter M40x1.5 - M30x1.5 Thermostat

Heizungsthermostatdapter M40x1.5 - M30x1.5 Zu beachten: Auf das Distanzstück sollte eine 2-Cent-Münze geklebt werden, damit sich nichts durchdrückt. Das Distanzstück kann auf die benötigte Länge skaliert werden. Ich empfehle den Druck in…

Order a print of this model

Printables

Bee Feeder for M30x3.5 threads

First! Thank you to @NicG for this awsome design! My first inspiration was to use bottles without PET (bad in sunlight → plasticizer → water) So i would prefer a brown glass bottle. I changed somthing minimal in the design to lower the…

Order a print of this model

Printables

M20x1.5 to Standard Smart Thermostat M30x1.5 for Homematic IP

I have a M20x1.5 valve on my radiator and there are no adapters available for my Homematic IP smart thermostat. The ones I could find online cost 10€ each so I made my own... I used 0.4 nozzle and 0.15 layer hight, no issues when…

Order a print of this model

Printables

Zeiss-Ikon Compur M30x0.5mm Pitch to M42x1mm Pitch adapter

A very niche adapter for adapting Zeiss-Ikon Compur lenses with M30 0.5mm pitch to the more standard M42 with 1mm pitch

Order a print of this model

Printables

M30x1.5 Engine Oil Funnel Z750

Printed on a Voron 2.4, 0.6mm nozzle, 0.3 layer height, 2 walls and 30% cubic infill. Use 5mm brim on the funnel (second image) and 0.15mm layer height modifier on the nut threads (third image). Attach the nut to the clutch cover. The…

Order a print of this model

Printables

Floor Heating Valve Knob (M30x1,5)

I needed an additional valve shutoff knob since one of the automatic ones was malfunctioning. Checked the dimensions and designed this knob. Important information for printing: Depending on your tolerances, you will need to scale the…

Order a print of this model

Printables

extension adapter for Aqara Radiator Thermostat M30x1,5

All the adapters I found didn't work, so I modeled my own. Design Concept This extension adapter is precisely designed to fit an Aqara Radiator Thermostat with an M30x1.5 thread, ensuring a secure and reliable connection. Its sleek design…

Order a print of this model

Printables

Protection d'éclaboussement M30x1.5

Diamètre extérieur bas du cône = 100mm. Epaisseur de la paroie = 5mm. Hauteur du cône = 200mm. Filetage = M30 x 1.5mm. Matières utilisé = PETG

Order a print of this model

Printables

Temset valve to M30x1.5 thermostat adapter

The Temset radiator uses a valve for which no adapters seem to exist. But for the installation of an eQ-3 eqiva thermostat, an M30x1.5 thread is required. The adapter makes it possible to install such a thermostat but the pin of the valve…

Order a print of this model

Printables

Radiator valve knob - M30x1,5

Simple knob for radiotar valve with outer thread M30x1,5. On the inside top there is a recess with diameter of 20 mm and depth about 1 mm. This recess is intended for a flat piece of steel or any hard material to be placed so as to…

Order a print of this model

Printables

Heizungsadapter M40x1.5 zu M30x1.5

Dies ist eine neue Version der gleichen Idee, die schon von jay1992 gepostet wurde. Der Unterschied besteht darin, dass hier das Gewinde zum Anschrauben an die Heizung länger ist - bei meiner Heizung war das nötig, da sonst kein Grip…

Order a print of this model

Printables

Danfoss Ally thermostat adapter to Oventrop valve M30x1

Print instructions Print with 0,1 mm layer height for sufficient thread quality. Fillament PETG or ASA. 4 outer perimeters. Supports needed. Use cylinder support enforcer with diameter 27 mm. The support must not touch the internal thread…

Order a print of this model

Printables

Radiator valve adapter from M34x1.5 (Polytronic valve) to M30x1.5 (standard for most thermostats)

An adapter to use thermostats or smart radiator controllers (like Fritz!Dect301, CometDect and probably others) on radiators with Polytronic valve. Print in PETG or ABS because PLA is not heat resistant enough!

Order a print of this model

Printables

Filament spool holder for Elegoo Neptune (and others that use M30x1,5 thread)

Remixed model made by sbonnes to use stock holder tube from Neptune 2* - to save both printing time and material. Also removed holes in legs to save time and made them 1cm longer. Trimmed to flat surface, so you can add rubber pads if…

Order a print of this model

Printables

M30x1.0 adapter for Homematic eTRV-2 radiator thermostat

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Order a print of this model

Printables

M30x1.5 adapter for Netatmo radiator thermostat

Order a print of this model

Printables

Ball handel with outter thread M30x1,5

Printed out of PLA with supports and 15% infill on Ender 3 V2. Desingned in Fusion 360 and sliced in Prusaslicer.

Order a print of this model

Printables

MRM30x3 Zerstörer Turret

An MRM30x3 Zerstörer Turret for one of the fightmech vehicles by LeoCeballos. This is only a remix of the Zerstörer Turret as there are currently no models for one of my favorite wobbie-era tanks. You'll need to download LeoCeballos…

Order a print of this model

Printables

M28x1.5 to M30x1.5 converter

I tried a few, but they were too weak. This model attempts to put the material so that even if the print breaks, it should still keep material between the ridges.

Order a print of this model

Printables

Dumbell Bar Connector M30x6

Introducing the Dumbbell Connector ! This handy 3D model is perfect for connecting two dumbbells together and turning them into one barbell easily. This connector features an M30x6 thread. I recommend using at least 50% infill for…

Order a print of this model

Printables

Danfoss RA-N to M30x1.5 Radiator Adapter

Just a warning, the tolerances on RA-N valves are pretty bad, so this might not fit you valve without some modifications, i designed it to fit my own. I made it because the one included in the shelly trv is badly designed. Print left,…

Order a print of this model

Printables

Adapter Rossweiner Heating Valve Smart Home Thermostat (M33x2,0 to M30x1,5)

This adapter is designed for a Rossweiner heating (M33 x 2,0) valve to mount a Smart Home Thermostat (M30x1,5) Use a filament that can withstand temperatures of 100 °C, like ABS! When I bought the thermostat, other adapters with such a…

Order a print of this model

Printables

Thermostat Adapter - Vaillant Circo to M30x1.5

Simply print in the given orientation. Do 4 Perimeters for ultimate strength.

Order a print of this model

Printables

M30x3 to water hose quick connector adapter

M30 to standard Garden connector. Used to repurpose garden fountain as a water pump for rain-collected water. Printed on 0.16 mm layer height with PET and 100% infill.

Order a print of this model

Printables

M30x3.5 nut H20mm 36mm 6

standard nut with 1mm chamfer on bottom side, and small chamfer on the start of threads

Order a print of this model