Counting matching models…
This is a 0.8 MOD gear 80T for Sharpstar Askar FMA180 telescope. It is intended to be used with ZWO EAF stepper motor with 0.8MOD gear 40T for automatic focusing control. For EAF assembly (please refer to pictures for more details) ,…
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET
This model is a very compact motor-reducer, with precise movement and without backlash. The overall height is 29mm, only 6mm more than the motor shaft. The reduction ratio is (1 + 38/14) : 1 , roughly 3.7 : 1 Print instructions The model…
Update 2: Optimized design in CAD + Improved some structural rigidity. (23-06-2024) Thank you Annex Engineering for creating a very fine extruder in the beginning. Check them out: Sherpa Heavy All standard from the Sherpa Heavy…
I've made a modified version of clockwork2 extruder to use my nema17 stepper motor that was lying around. currently there is no option to attach wire cover or use pcb https://photos.app.goo.gl/kay8pqxwpjpPym6F9 video example of working…
Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
same model but exported as separate files as the original STL file won't work in Cura Slicer.
Introduction: The idea for the planetary gearbox emerged while building a roller blind control, where the Nema 17 motor lacked the holding torque necessary to maintain the position of the blind. This need led to the exploration of…
Here’s a design for a 2-stage planetary gearbox with ~ 10:1 reduction. It’s around 40mm tall and fits nicely on top of the Nema17 stepper motor, joined with some (>40mm) M3 bolts. The gearbox works just fine under the load and provides a…
A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
simply adding ready to print stls instead of obj that had issues with orca
Parts should fit perfectly if printed with recommended Voron settings. For those who want to put in on Voron SW, you may need to edit or sand a bit of the carriage parts(to which you attach mgn12) as it may interfere with the stepper…
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
Note: You have to use slightly longer M3 Bolts
Schrittmotorhalter Nema17 / Stepper motor mount Nema17
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
A NEMA17 stepper motor mock-up with a rotating shaft and face mounting capabilities. Print Settings Printer: Prusa i3 MK2 Dolly Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Post-Printing Remove supports and clean up. Assemble…
Mount NEMA17 stepper motor to 2020 profile.
There is something that I really missing from Voron Switchwire machines... The motor cover... So I decide to make one... One? TBH, not one…. a many, and for different motors too! :D for original OEM motors and LDO and friends (I mean big…
Latest update: 05AUG2019 Work in progress! This is a Pan and Tilt mechanism driven with NEMA17 stepper motors. This design is a modification of the design by thingiverse user 'buffcleb' at https://www.thingiverse.com/thing:1396552 (Latest…
Great for polishing 3d print with brass/copper/bronze and other metal-filled filaments (and rocks of course !) Remix from : https://www.thingiverse.com/thing:2744886 Almost fully redraw with the aim to make the structure with a CNC router…
A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to…
FLYSHT42 / Nema17/LGX Mod for a Voron 2.4 using LGX or nema17. Will fit 10mm OD cable, fit in place with 2 cable ties. 2 Versions, If you are using the default Z chains at the back of the printer please use the Thin version and print with…
After struggling to find any kind of upgrades that can be done on this Monoprice MP10 printer (same as the MALYAN MA10), I designed and created my own V6 Hot-end adaptor. If you own one of these printers, this adaptor lets you KEEP the…
A mounting bracket for the Klipper Screen ADXL sensor to the extruder stepper motor. Requires 2× countersunk M3×20 screws to replace two of the the stock stepper motor screws. This works specifically with the sensor included with Sovol…
Bracket for mounting a nema17 motor to a 2040 v-slot extrusion Category: 3D Printer Parts
Designed this for my Ender3v2 rebuild and intended for the NEMA17 z-steppers on the 2040 extrusions. Used PLA for prototyping in the picture, but every other filament should be fine, personally I go for ASA . To mount this on your stepper…
I made a model of the NEMA 17. I was testing a $1 caliper I bought off AliExpress with this model. +-.2mm
10/13 Added NEMA14 support. FYI NOT BEEN TESTED. 10/20 UPDATED CALIBRATION INFO 10/21 UPLOADED 5MM TO 5MM COUPLER ERCF2 Direct Drive NEMA17 Mod – Ingeniously Simple, Remarkably Effective Upgrade your ERCF V2 with this direct-drive NEMA17…
With 2 M3*4 and 2 M3*25 screws you can add close loop control to your nema motor. This model is made to respect the profile of the motor and add only 6mm behind it. Simply add a magnet to the shaft and screw this. That's it. There is…
Materials needed: 3x7x3 Bearings for the planetgears 5x16x5 Bearing for the cover M3x14mm screws and nuts for the planetgears M3x20mm screws for the whole assembly I printed it at 40mm/s and with a horizontal expantion of -0.1mm
I designed it for my DIY 3D Printer project. Enjoy! nema17param.FCStd is parametric FreeCAD sourse. SHA 256 checksum: b42b007f9a17d0b99fa42b244ce4feace04e35770caa8a4032f3b37cce8e85b2 nema17param.FCStd…
4pc M3x25 socket head cap screws 1pc M3 set screw 3pc 6702 bearing (15x21x4) 1pc 6813 bearing (65x85x10) 1pc NEMA17 1pc A4988 driver 1pc Rumba controller 1pc 12v2a DC power supply Print 3 c-clips, one of everything else. gear A, gear B,…
I was sick and tired of the massive VFAs of the original LDO nema14 motors so I did the “Voron V0.2 Nema 17 mount” mod, but now the tophat and backplate did not fit anymore. So….. I modeled all neccesary parts to not only make the tophat…
The Nema14 depth is various, my based on stepper motor of FLSUN V400 extruder
NEMA17 bracket mount for 30x30 extrusion Category: 3D Printer Parts
Support & renforcement pour l'axe du Nema17 de l'axe Y originellement conçu pour la Creality CR-10. S'emboite dans le profilé 2040 . Calibrage de l'extrudeur impératif pour l'emboitement dans le profilé 2040. Nécessite : un roulement…
When using the Dew shield I used Black Velour Flocking see link to self adhere onto the inside for a smooth close connection. I printed the parts with CF PLA as I liked the dull black finish.…
https://www.youtube.com/watch?v=KhLWvCct6ng&ab_channel=MarcinPaska
This actuator can be attached to the top of a NEMA17 stepper motor, to create a simple cyclic linear motion. Two versions of the piston wheel are included, with and without spur gear teeth. The gear teeth are module 1, 40 teeth. Two (2)…
I have not tested this yet, but i believe it should work without major issues. some things might be remaining.
Customized version of https://www.thingiverse.com/thing:1472259 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1472259 Instructions Using the following options: thickness = 2 nema_width = 42.3…
This is a parametric stepper mount based on the metalic stepper mounts for the NEMA17 stepper motor. I used the model to print a mount for mock-up purposes for a Prusa i3 type printer made from 2040 extrusion profiles, while awaiting the…
A fan mount for a 30x30mm fan to mount on a nema17 motor. The mount is 38mm at its widest and adds 2mm between the motor and the motor mount.
This pump is a perfect project to reuse the NEMA17 stepper motors from an old 3D printer like ender3, prusa MK2 etc. IMPORTANT: All parts should be printed using PETG or ASA, especially if you run the pump of longer intervals. Using PLA…
To reduce the axial load on the motor, a KFL08 bearing should be fitted. This spacer for easy installation of the flexible coupling T8 shaft. Required longer lead screw T8. Compatibility: T8 Lead Screw CNC 3018 Hand Wheel Mounting…
A mod to Arca Swiss Plate and Top Bracket to use m4x6x6mm threaded inserts. Also focuser mount for a NEMA17 motor. Included step and fusion file for the NEMA mount since it is a complete redesign. Could be easily modified for different…
I do not own an ender3 “v1” so I did not test this installed --- print it with many walls (6 or more) and high infill (40% or more) avoid PLA for this at least the piece touching the motor. the cover is fine in PLA You'll need either two…
This mod and the associated printfiles will give a quick explaination on how and why to install Stepper Dampers to Neptune 4 Series Printers. Included Printfiles are to offset the y Limit switch on Neptune 4 and 4pro - otherwise the bed…
I needed a version of the original modified Sherpa Heavy that included a collet for running it in a bowden configuration so here we are. Would also work if you just want your reverse bowden more securely mounted. I've only included the…
Parametric holder for NEMA17 stepper motors, complete with additional stowage for cables. The following parameters can be changed to control the number of cutouts and minimum spacing between them ncx – Number of cutouts along x dimension…
This is a penholder for a polargraph plotter. It has a Nema17 with an excenter for pen lift and uses 2 small deo rollers for pen lift instead of a servoand servo arm. Here you will find a short video:…
NEMA17 MultiMount The Orig is Alu made Category: DIY
Based on https://www.amazon.co.jp/Motors-Super-Power-Nema17-LDO-42STH48-2804AH/dp/B0CD1NMN5L
这是一个42步进电机的减速箱系列。它们的直径是61mm.你可以单独的使用cycloidal或harmonic作为一个减速箱来使用，也可以组合他们在一起使用。 Cycloidal： 有2个减速比。分别是9：1和20：1。使用6根3mm销轴做滚针。4或3个8-12-4的轴承。一个35-44-5的轴承。…
Improved extrusion system for Ryper Mods for MK3s or similar. Compatible with R6 extruder system and MMU2S. Ideally printed on PETG, ASA or ABS. Remember changes to your firmware: NEMA 14 steps with M92 E714 Quality current set to M907…
M3x4x4.2 - insert nut - 4 pcs
Spacer allowing to install flexible shaft coupling and KFL08 bearing according to standard mounting holes nema 17. Mounting components: M3 screws M3 hex nuts M5 injection nut Category: 3D Printer Accessories
These are NEMA17 stepper motor models in the following sizes: 42-30 42-34 42-40 32-48 42-60 The shaft lenghts are variable with 16mm, 18mm and 22mm options. The shaft has a diameter of 5mm.
This is a slightly slimmed version of original selector motor support for ERCF 1.1. It consist a little bit more place for a pancake NEMA17 motor up to 23mm (there is a 24,3mm on a model, but more than 23mm of a motor might be difficult…
This is a derivative work of the Herringbone Planetary Gear Bearing by Emmett Lalish . DEPRECATION NOTICE: New model available here: https://www.printables.com/model/178044 Curtain cord configuration: 4mm diameter balls and 2mm of thread…
Insert nuts used with Voron and filament sensor parts used with Prusa mk3s are required. I will also upload the unprocessed version of nema17's remix. I don't have a nema14 motor, so I haven't tested whether it can be used. CAUTION You…
Mirrored version of @RedWish's EBB36 PG7 Mount behind NEMA14 stepper
A precise model of the Nema17 2.5A 48mm stepper motor I made NOT for printing, this models parts are not joined together and could cause a very weak print! Category: 3D Printing
This is part of the research for The μRepRap micron scale 3D printer project RepRapMicron . It has now been superseded for that purpose by a Block stage version https://www.printables.com/model/876888 , but is still interesting in its own…
This bracket/mount can be used for placing stepper motor with gt2 pulley on the printers floor (for enclosured printers), Originally designed to add secondary table motor and screws for FlyingBear Ghost 6. Supplies required: 4pcs M3x10mm…
Automatic filament purge tool for Voron/CoreXY printers The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps.…
Adapter that fits standard LEGO Technic pins and your well known NEMA17 stepper motor. Parts needed: NEMA17 motor (obviously) 4 pcs 10mm M3 bolts Lots of LEGO parts to integrate this with Have fun!
Customized version of https://www.thingiverse.com/thing:16627 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=16627 Instructions Using the following options: teeth = 104 profile = 12 motor_shaft = 61…
I found Wired1's solution https://www.thingiverse.com/thing:29572 most suitable for my use. Then the heatsink I ordered arrived and I wanted to add that in for an additional cooling effect. (FYI, the addition of a heatsink to the motor…
I realized that not everyone is able or willing to modify BMG clone gears. This shim is a simple solution for that problem. Print it as thick as you need, usually about 0.5mm. The best part is that it can be printed in PLA! How? Because…
Automatic filament purge tool for Voron/CoreXY printers The Goose Belt Purger is a compact, modular add-on for Voron-style printers that simplifies purging during tool changes. Ideal for multi-material setups or frequent filament swaps.…
Do not guess the direction of your stepper motor any longer while developing code - just use a clockhand-style pointer. These parts are press-fit for NEMA17 axis, just print it with an as-fine-as-possible setting (I used 0.1mm Layers in…
cnc machinable nema14 water cooling block
This remix upgrades the extruder for multi-material (MMU) systems and fixes common clearance issues from the original design. Design Improvements in this Remix: Filament Sensor: Added a mount for a microswitch and steel ball to catch…
Cable chain/Drag chain mount for NEMA17 motors for stuff like MPCNC. I found good chain, but I wanted to mount chain to motors directly, so here's my solution. Two parts which clamp together with two M4 screws (DON'T OVERTIGHT!). Remember…
Remixed from https://www.printables.com/model/98032-easy-stepper-motor-storage Added some holes to the original so it can operate as either a base or a top piece for easier transportation. Added some options for smaller amounts of motors
Both my Mini and MK3s has the cables to their X-axis motors just hanging with a zip tie holding the cable cover in place around the cable it self. This reliefs the cable a bit and firmly hold the cable cover inplace with a zip tie that…
I found that my extruder stepper was running hot (even after tuning the current) on 15-30hr prints and I was getting print failures due to the printed drive gear on the Pitan extruder softening and spinning on the D shaft. I found…
NEMA17 A/B Motor mounts for Micron R1 🔧 Overview New A/B motor mounts for your Micron, that are designed to use NEMA17 motors, with accompanying dual sheer bearing holders. Full bed travel is retained, however you might need to readjust…
The diameter of the gearbox on my stepper is 36mm. You need 4 M3x8 Bolts, 4 M3 Nuts and 4 M3 Screws (depends how thick your bracket is). OBJ included if you need to change nuts etc.
I'm building robot arms that I plan to make available to everyone through my website . To get enough power to move the arm the way I want, I needed a gearbox, which is a way to trade speed for power. Nobody I can find makes to my spec, so…
I designed this to be low profile for my own needs, cuz existing mount models were not great. Narrower then the Nema17 profile Side cutouts for wires only 4mm high. Use PETG or other higher temp plastics, NOT PLA. Steppers get hot.…
Support /protection/renforcement de l'axe moteur du Nema17 pour l'axe X de la Creality CR-10. Doit certainement convenir pour d'autres imprimantes. 2 écartements support/moteur dispo. Juste vérifier l'écartement moteur/support, d'origine…
If you need to incorporate NEMA17 or NEMA23 motors in your design's, the simple openSCAD fully parametric script that will generate you nema17 or nema23 object Instructions call nema module Category: Other
Only modified to use a NEMA17 stepper motor ## BOM: * cnc 60T pulley (2GT, always 2GT type) * one more 20T pulley ( the same type of the ERCF original design for selector motor) * 154mm belt, (2GT close loop) * nylong washer M5 0.5mm…
This is a vise mount for the OpenScan so that it can forcefully grip relatively flat but heavy things (in the photos, I show it gripping a metal Singer 503 front face plate). I used the following hardware: External Hex Head M3x30mm…
Stepper Engine NEMA17 L-shaped mount
This is a custom extruder shell designed specifically for the Neptune 4 Series , intended for users who have upgraded their extruder stepper motor (NEMA14) with an aluminum heatsink . The stock extruder cover may not provide enough…
Simple Nema 17 holder used yo attach the motor on a plate. This thing has been designed using Onshape. It is available using following link :…
Adapter for NEMA17 motor to connect 12mm Hexa wheel hole
Ender 3 NEMA 17 Cover for Y-axis, with hole for visibility. Good for preventing falling dust caught on motor shaft. Easy to print - no support needed.
Stepper to 8mm threaded rod Category: DIY
