Counting matching models…
This is my attempt to make a traveling box / case for the BetaFPV Meteor75 Pro. Lid_V2 comes with round handles to make opening easier. Printing instructions still apply. Works with V1 box Box_V2 updated to have keying for V2 lid.…
These magnetic clips will hold a wooden or plexiglass panels in place, creating a beautiful enclosure for the Flashforge AD5X printer or any steel frame print. Supplies… 2x 12"x15"x1/8" (20x24cm) boards or 12x15" (20x24cm) plexiglass…
Printed in 0,2mm without any supports. Use two 6x30 screws to mount it on the wall and than just slide the receiver to the mount. Also available as zip tie version .
Each of the four side pieces has a slot for a magnet. The file was originally designed for a 20 mm x 6 mm x 2 mm magnets. I was having a hard time finding magnets of that size, so I edited the file to make the spot for the magnet 1 mm…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
After I printed my Wall Mount , I noted that I have no space on the wall left. So I decided to make a Zip Tie Version, which I can attach to my TV Mount. Printed in 0,2mm without any supports.
This is a magentic lens filter case for 49mm Filter. Customized version of https://www.thingiverse.com/thing:43781 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=43781 All credits got to:…
I designed Yoda's Lightsaber from Star Wars in Fusion 360. I would recommend for the blades that you use PETG with no cooling to make the blades as strong as possible. As for the hilt, I used some silver PLA. The pommel screws into the…
Storage for printed hex tiles in a frame. (either for the interlocking or magnetic frames) Trays snap together with 8m magnets.
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. This bin is designed to work with the Gridfinity Box For Stuff…
Prints without support. Other components needed: 7-9,5mm steel ball, 5mm magnet. Assembly instructions: Insert the magnet into the small hole in the lid and secure it with superglue. Put the steel ball into the hole in the box. Close the…
Magnetic dovetail saw guide. The Fusion files are parametic for size and angle. There are probably lot out there but I was practicing Fusion. These are about 45mm with 15mmx2mm magnets. Just suprerglue the magents in. Category: Hand Tools
A Nespresso Pro capsule dispenser to attach on a fridge with magnets. Holds 15 capsules. The magnets are embedded in the print. You need the exact magnets and stop the print at the right height to insert the magnets. It's designed for 8mm…
This is a magnetic mount for IKEA Skadis to mount allen keys magnetically
Hello, This is my first case/ first 3d model I created. I bought a chocofi a while back and was disappointed in the cases available. I wanted something a little more of a case than a cover but keeping the height as low as possible. The…
A small magnetic key ring. Perfect for hanging your keys on a door or to hide a key out of sight. Or print 2 and stick them together! uses a 10x10x10mm magnet (mine actually measured 9.36mm cube) Print it in the orientation it comes in as…
A selection of Pellet labels for my Traeger. Use them to identify what pellets are in the hopper. You can add 6x2 magnets to hold them inside the hopper lid, or on the outside of the smoker.
Magentic pushpins are small and handy tools used to hold papers or notes in place on metal surfaces such as whiteboards, bulletin boards, or fridges. They come in two different sizes, each designed to accommodate different magnet sizes…
Ein kleiner Organizer für die Fernbedienungen Samsung /Magenta / Amazon , plus kleinere Öffnungen für Kugelschreiber etc
A mount for a 9mm firearm. It was tested with a glock 17. I used a 20x50x5 magnet to secure it to the back of a safe, the magnet is glued in place. The pole is supported by a 40x5mm metal rod which is also glued inside. The pole goes 64mm…
Storm Trooper Fridge Magnet - 1x 19mm magnet - Glue in with some super glue
A holder to accomodate the remote of a Magenta TV Stick by Deutsche Telekom. Can be glued to the wall with double sided tape or screwed with the prepared screw holes.
Build of material: 12mmx12mmx3mm N52 magnet Pause on layer 70, insert the magnet then resume. (please see my ocraslicer 3mf file)
Just updated the chess piece models to be built wih a solid base and an embeded magnet. They are sized to be 1.25" at the base as well. For my chess board, I updated the bases to have a small relief on the bottom to allow some room to sit…
Lläßt sich mit verschiedenen Materialien einfach drucken. Wer möchte kann für besseren Halt 2 kleine ( ich habe 10mm x 1mm genommen ) N52 Magnete benutzen/an-einkleben. Weiterhin ist der Ständer/Halter beidseitig nutzbar und jedesmal ist…
this print allows an Adafruit Magtag device to be attached as a fridge magnet They are needed: - two perforated magnets
FlickMagnet is the ultimate solution for anyone who wants to keep their fridge tidy and organized, without sacrificing style or functionality. Our innovative design allows you to effortlessly remove papers from your fridge with just a…
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
This is an egg magent featuring a place too put a magent on the back and a smiley face on the front😀, I was thinking what too do with this competition but then i thourght what goes in to a fridge? 'eggs!', this is where i got my idea…
Wem gehts nicht auf den Sack mit der Telekom. Hier habt ihr zum Festplattenrahmen vom Receiver 400 den 401 Rahmen. Keine Garantie das es funzt, würde mich aber auf ein Feedback freuen. Step ist dabei Wenn ihr eine 2.5HDD verbauen wollt…
This model requires 3mm x 12mm magnets that insert into the back. They fit pretty snugly for me, but I still used a drop of super glue. It can hold up to 5 magnets, but you can use less if it's not needed. It also requires a 2 inch binder…
Small magnetic holder. Size is 55x55x55mm. Two main file ( small_magnetic_holder_10mm_holders ) works with magnets that are R5x2.5mm (radius of 5mm & 2.5mm thick), additional model provided for R4x2.5mm. I've found the R5x2.5mm magnets,…
From Original Model: “EXPO Fine-tip dry-erase whiteboard marker holder originally designed by jsmith14 from Thingiverse. Fits 8 markers and can hold them securely in a horizontal position (since markers have the indication to store them…
A case for a SKR v1.4 (Turbo) Board and a MKS Hotbed Mos+ v1.1 Mosfet. Needs 1x 4010/4015/4020 Fan, 4x 6x1 Magnets, 8x M3x6 Screws + 8x DIN 934 M3 Nuts and 4 Screws (+Nuts) (Max. M4) for the Fan. Supports are optional if you master your…
The Cloverleaf 2025 fridge magnet is a unique clover-shaped design, measuring 10x2 cm. Perfect for organization or as a stylish decoration, this magnet adds a touch of charm to any fridge or magnetic surface. Made from durable materials,…
This is an alteration of RamjetX' magnetic shifter ( https://www.thingiverse.com/thing:2919690 ). So all of the info there applies to this one here as well. I just made some slight changes to make it a better fit for my sim racing wheel (…
Remixed model from Bmorr and nFinity. Added 2cm space for tokens. Model accepts 12 5*2mm magnets press fit. Depending on your printer small dab of glue may be needed. Commander slot designed for top loader hard sleeve (although dragon…
While my previous version was OK I though one could use more magnetic strength, I opted out to using rod magnets. Uses ¼ x ½ and ¼ x ¼ rare earth rod magnets (that is if you want the greater holder power) See other version for use details.
Customized version of https://www.thingiverse.com/thing:3346069 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=3346069 Instructions Using the following options: textstring1 = eSun PETG textsize_upper =…
A magnetic tic tac toe game that can be played on the fridge, or on the move, in the car, on the plane. Printed with 2 colours Suited to 6mm x 1mm magnets Category: Games
These are a negative volumes for adding magnets to Axolote Hex walls, making them compatible with my Magnetic Tile System for Axolote Hex, the AxHex Mag Tile System . They can be used in a slicer to create spaces for 5mm x 2mm disc…
Just add two or more clips to your blue Ikea bag and use it a perfect laundry bag. The magnet clips on to the machine, while unloading, which is very convenient! The print works best with a more flexible material (e.g. PetG). The Magnet…
Halterung für Trockenbauwannd Damit kann der bestehende Schalter durch einen Magenta SmartHome Wandtaster der Telekom ersetzt werde
I needed a really quick and simple holder for these magnets to store in a small 3D-Printed drawer system, as the box they came in was too large. This design is for 10x2mm specifically, however it should be easily scaleable in your slicer…
A simple holder for the remote.
This is a complete IL Eurostick model, there is an included mod to the model that allows someone to use a Magenta PCB from Paradise Arcade on this lever. The Magenta mod requires the following parts from the uploaded STLs. Magenta Mount…
I got tired of my smart home sensor falling of the wall, so I designed my own wall-mount. I will add more pictures (and maybe drill-holes) after the first prototype print is ready.
I have a Nebo Big Larry Pro torch, its great, the magentic base is really useful. However it isn't very stable and gets easily knocked off, as you can see from the photos it has taken a battering. This holder slips over the tube where the…
I use this duct: https://www.printables.com/model/1200992-prusa-core-one-magnetic-3in-and-4in-duct-exhaust-a I like this duct and the fact that it's angled. I wanted to add some flaps to my chamber fan but didn't want to reprint anything.…
Einfach Reinigungsbox mit Scharnier (1,75mm Filament als verbinder/Achse- einfach biede seiten nach einfädeln verlöten) für ein kleines Reinigungsset (in meinen Fall 9mm). Minimale Supports nötig. Magent : 5mm (durchmesser) x 2mm (dicke)…
Core One heatbed cable cover remix based on the 3Dprintfun model. I modified the original 3Dprintfun Fusion 360 design to use 20 × 6 × 2 mm magnets, that I had available at the time. Two versions are provided: one for 2 magnets and one…
Magenta Cockatoo Parrot Figurine - a decorative print, perfect as a desk or shelf decoration.
This is a simple holder for up to two laboratory tubes with a 10mm diameter and a inverted conic bottom. You can embed two magnets measuring 10mm (diameter) x 2mm (height) in order to capture ferromagnetic elements in the sample inside…
A Simple Humidity meter holder V2.0. NOW Adjustable -- you will need two bolts as an axis. Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Category: Household
Child‑friendly classroom phrasing This apple can be used as a hands‑on teaching aid in kindergarten or as a classroom de
This is a small magenta-colored cube.
if you put magnets on the tokens and the want they can become power objects
Magenta Warrior on Bear Figurine - a decorative print, perfect as a desk or shelf decoration.
I have created a simple block that can hold up to 8 drill\screw bits. Can work with the normal length and longer length ones. There are two spaces for magnets. One on the bottom, and one on the back. I have made them accept magnets up to…
This is a very simple remix of the magnetic clip that jkim_makes and the rest of the team made for the WDT tool. I had 6mm x 3mm magents laying around instead of the 5mm x 2mm ones the clip was originally designed for, so I remixed the…
I subtracted a rough volume of a HDD Magnet to embed one during printing. The magnet is so strong it can be a little sketchy, luckily it sticks to the buildplate and not the brass nozzle. I tried to get some distance and infill between…
A project that makes it easier to remember the components of offset printing colors. CMYK Cyjan Magenta Yellow blacK. The color mode required for graphics intended for printing.
Magenta Gnome Figurine - a decorative print, perfect as a desk or shelf decoration.
Magnetic Space Suit / Takeover lightning bolt for the villains. Designed for 12mm x 2mm N52 Neodymium Magnets These are the magnets I got on Amazon: https://www.amazon.com/AplysiaTech-N52-12x2mm-Neodymium-Scientific-Whiteboard/dp/B0F4CWPSM7
Magenta Horse Head Figurine - a decorative print, perfect as a desk or shelf decoration.
Magenta Reindeer Figurine - a decorative print, perfect as a desk or shelf decoration.
Magnetic feeder for flexarium or terrarium for chamelon or other repltiles
Build of material: 12mmx12mmx3mm N52 magnet Pause on layer 70, insert the magnet then resume. (please see my ocraslicer 3mf file)
TIRED OF THROWING A PARTY AND SOME JABRONI TURNS OFF THE LIGHT SWITCH THAT POWERS YOUR SMART SWITCH BECAUSE YOUR RENTAL WAS BUILT IN 1875 AND HASN'T BEEN UPGRADED SO YOU DON'T HAVE OVERHEAD LIGHTS? AND YOUR LANDLORD HAS THE AUDACITY TO…
From Original Model: “EXPO Fine-tip dry-erase whiteboard marker holder originally designed by jsmith14 from Thingiverse. Fits 8 markers and can hold them securely in a horizontal position (since markers have the indication to store them…
Ein kleiner Organizer für die Fernbedienungen Samsung /Magenta / Amazon , plus kleinere Öffnungen für Kugelschreiber etc
Remixed model from Bmorr and nFinity. Added 2cm space for tokens. Model accepts 12 5*2mm magnets press fit. Depending on your printer small dab of glue may be needed. Commander slot designed for top loader hard sleeve (although dragon…
Rocky Horror Picture Show - Magenta (Patricia Quinn) - 1975 3D printable model.
Diameter: 5,5mm Holes depth: 3.05mm I used 9 of this magnets: https://www.amazon.de/dp/B0BMZX8FV3? with this glue https://www.amazon.de/dp/B0036EGDVW?
Uses 4 6.6mm x 6.6mm x 3.3mm square magnets double stacked. They are rather strong so I mounted the stacks in opposite polarity to keep them from popping out. Also, you could just glue them in place Print settings: Material: PETG Nozzle:…
Modified the original design to use two 15mm magnets in stead of 4 smaller ones. I also rotated the handle for better bed adhesion. Recommend using supports for the basket.
