41 models
Another design for lamarzocco 58mm portafilter. La Marzocco 58 mm filter holder support for tamping without having to place the filter holder on the work surface. Certainly works with other filter holders but I haven't tried them.
Print approx. €3.33–€4.07 excl. taxPreliminary estimate for one variant
30% infill, no raft needed, print upside down.
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
La Marzocco 58 mm filter holder support for tamping without having to place the filter holder on the work surface. Certainly works with other filter holders but I haven't tried them.
Print approx. €3.35–€4.09 excl. taxPreliminary estimate for one variant
funnel for 7gr lamarzocco basket (single dose)) work with 58mm Niche grind cup funnel is magnetized, you will need to insert 4*2mm magnets after printing amz ref of magnet used :…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
This is a replacement circuit board housing for the decades old La Marzocco Espresso Machine at my friend's church. Apparently, attempting to acquire this housing new from the manufacturer is quite difficult. I've .step files and supplied…
Print approx. €7.35–€8.98 excl. taxPreliminary estimate for PETGSource material: PET
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
Chamferless 1/2in drive sockets designed to fit damper and air spring top caps on mountain bike suspension forks. This set includes common sizes for Fox, Marzocchi, and Rockshox forks. For reference, the 26mm socket printed with Prusament…
A little bigger than 26mm because I had tolerance problems, exact size in the pictures. Hope you find this helpful and save about 30€.
I wanted to try out the “brew by weight” function on my espresso machine. However, with the scale placed on the drip tray, there wasn’t enough space for my coffee mugs. Since we enjoy both cappuccinos and Americanos, I designed an…
50mm Fork Seal Hammer for seating your new fork seals for a Ducati Hypermotard 1100 Evo. Plenty of other bike models run these forks. 2 piece shell of the slide hammer is held in place by the 2 rotating collar lugs. This slide hammer can…
Custom fitment adapted from the original. Generated through configuration page on OnShape page. Fits La Marzocco Linea Micra. Mini untested.
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
This is a stand to hold both types of portafilters from La Marzocco. I designed it for my own usage because I could not find a version that was sufficiently sturdy and horizontal. this version has a tuned fork to adapt to the specific…
This is a 3D printable portafilter handle modeled after the standard La Marzocco handles. I printed these in Hatchbox Wood, sanded them with 150 grit sandpaper, stained them with dark walnut wood stain, and finished them with spray can…
Use with original hexagonal rod. Use PETG, ASA, Nylon…
Espresso Portafilter Holder (Compatible with Eureka Atom 65E & La Marzocco Linea Micra) Slide your La Marzocco Linea Micra portafilter into place and tilt it up to activate the button on your Eureka Atom 65E. Print it with 100% infill to…
A friend noticed that on his espresso machine would be good to have the option to put the small espresso cups higher up, closer to the funnel. La Marzocco does not provide such an adapter, so I made one. I printed it in PETG, but probably…
It is neccesary to add print pauses to change fillament colors, unless a multi color printer is used. ironing is reccomended. Ender 3 V3 SE, 0.4mm nozzle Generic PLA @ 215c
Adjuster knob for Marzocchi 888 RC3. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill: 60 Filament: Steon PLA Category: 3D Printer Parts
Daiso magnets were used for this plate but feel free to substitute with magnets of your choice. I added felt tape over the magnets to ensure the scale does not get scratched. Designed for Acaia Lunar Scale
Marzocchi 380 C2R2 Rebound knob Category: DIY
Modeled a quick little cover for the indicator lights on the La Marzocco Linea Mini. The red light blinks indefinitely while in stand-by mode, and my machine sits parallel to my TV, so the red dot is reflected onto the TV. This solves…
I think a lot of people bought this La Marzocco single shot basket after Lance Hendrick posted about it. It really is quite nice but I didn't want to spend more on accessories like tamps and funnels as I did on the portafilter basket…
Marzocchi 380 C2R2 Low knob. Updated version: Body1 marzzz27.stl Category: DIY
My LM Bottomless with Pesado would not sit on the Zerno PF holder due to shape and balance so this adapter makes it all work.
This stand is designed to save storage space when not used. It is able to hold the three standard portafilters that are coming with the La Marzocco Linea Mini. It does not perfectly fit with linea mini R because the new portafilter design…
Requires M6 nut to be placed inside, use glue to keep in place if necessary. Use a high infill percentage (I used 70%) to make sure the weight is well supported. PLA WILL slowly creep under the constant load of the weight of the machine -…
Hermoso adorno para regalar este 8 de marzo, sirve muy bien para decorar cualquier encimera o mueble de alguna estancia. Agregue el archivo de la base, pero puede reemplazarlo por una base de madera. Soy un diseñador en formación,…
Rebound knob for the Marzocchi Bomber Z2 fork. Model shown was printed in ASA with 3 walls. I recommend adding some Loctite to the screw. Parts needed: M3x4x5 Heatset M3x8mm Screw Loctite
The magnets I'm using are cylindrical. 4mm in diameter and 1.5mm high. Simply add a pause in your slicer at height 124, then put some glue down, add the magnet. Once the glue is set, resume the print. I printed using 0.1mm layer height…
Taller version as the original model Alternative low-profile drip tray for the Linea Mini R. More headroom for tall cups, flexible scale placement, and easier switching between single and double shots. You will need: 2x M3 heat-set…
During high volume commercial usage, the pump motor on La Marzocco's GS3 could overheat and stop functioning until it cools. This is due the proximity of the pump to the large steam boiler and lack of cooling. The models uploaded here is…
Alternative Drip Tray for La Marzocco Linea Mini with reduced height I’ve been tinkering with an alternative drip tray design for the La Marzocco Linea Mini R to address a comon issue: limited vertical space when using tall cups or…
Fork vise jaws for Marzocchi upside down fork as fitted on Triumph Speed Twin 1200 (2021-2024) 2 holes : one vertical, the other at an angle of 20 degrees. 53mm upper tube You can use 6 10x3mm magnets.
Inner plastic ring of the tube support which is attached to some Marzocchi motorbike suspension forks. It can be used as brake tube support or speedometer cable support. This ring is to be inserted into the metal hook-like support…
Hermoso adorno para regalar este 8 de marzo, sirve muy bien para decorar cualquier encimera o mueble de alguna estancia. Agregue el archivo de la base, pero puede reemplazarlo por una base de madera. Soy un diseñador en formación,…
Fork vise jaws for Marzocchi upside down fork as fitted on Triumph Speed Twin 1200 (2021-2024) 2 holes : one vertical, the other at an angle of 20 degrees. 53mm upper tube You can use 6 10x3mm magnets.
Rebound knob for the Marzocchi Bomber Z2 fork. Model shown was printed in ASA with 3 walls. I recommend adding some Loctite to the screw. Parts needed: M3x4x5 Heatset M3x8mm Screw Loctite
Niche Zero holder for Sage/Breville or La Marzocco 58mm portafilter. Designed to stylistically match the grinder while still seamlessly integrating the stock dosing cup and holder. It is an elegant way to grind directly into a portafilter…
![[finecoar] La Marzocco Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766202/images/5982859_b75ce2b1-9c05-4248-aea9-dadf4f05b914_4b3ff1a7-3289-4fac-925d-2861b75a2782/p1040377.jpg)
