Counting matching models…
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Thangs This model is support free BUT i recommend you use a support pillar right next to the…
It's time for the first Christmas decorations of the year. With this mini Christmas tree for the shelf, windowsill or desk, the first Christmas spirit will come. The tree with its base plate fits exactly over an LED tea light, so that it…
You can print it instantly from the included .gcode files or customize your own print. In the attached .3mf file (1mm thickness) the seam is painted in the back of the figure to not affect the appearance and at the same time to be as less…
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of ribs (depending on the size of the ball): 10, 14, 18 and 22. Rib width 3 mm. Print the bottom part with a support so that the curve…
Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).
Prints fine with 10% infill. Print at .10 layer height for maximum detail. Glue together.
Christmas bulb. I optimized the model, there is more support in the pictures than would be necessary and I removed part of the fill. Add feedback or pictures for comment :-)
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
I'm making a master collection of all symbols of the car dashboard. I will upload now 50, and I will update overtime. I hope you like it. 1st pack (50): 10/07/2024 2nd pack (50): 12/07/2024 3rd pack (50): 16/07/2024 4th pack (50):…
Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Christmas tree…
Gamble Mask. Added Gamblemask.8offset.obj on 2/12/2025. (Represented by gold version pic) Its thicker and should be less of a gamble. You will have to generate your own .3mf and or gcode.
Christmas bell with heart ,print in place. Without supports, it can be printed even without a collar, the heart bridge from the outside can be printed without problems Printed from Prusament PLA Blend Viva La Bronze:…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
A stencil for christmas coffee How to use it To begin, hold the coffee stencil over the top of the cup of coffee or espresso. Using the small spoon or scoop, sprinkle a thin layer of ground cinnamon or other spices over the open areas of…
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
A modification of my original model. This one is enlarged to 80 mm height to the size of a banknote. If your Christmas presents also include money you can hide it here and hang it on the tree. Of course you don't have to print the bottom…
His partner: https://www.printables.com/model/1473177-alternative-christmas-deer-doe Print Tips Material: AzureFilm - PLA Silk Gold Layerheight: 0.2mm Structural Support: No Infill: Grid
Sawaki Kodo Roshi - Zen Master. Sawaki Kodo Roshi was a Japanese Zen master, poet and calligrapher who lived from 1880 to 1965. He was born in the city of Hiroshima and later became an influential figure in the Soto sect of Zen Buddhism.…
With these accessories, you can uleash your creativity and create endless layouts to attach on your PC. You can personalize it and turn your PC into a work of art. In case you have any suggestions on how to make a certain part fit better,…
To make the trap you just print the lid and fill the jar with sugar water and yeast. The fermentation will generate CO2 which attracts the mosquitos they fly in the cone and get trapped. Turns out it attracts other pests like bald faced…
After a year, Christmas is coming again, so I made a new Christmas bell pattern to decorate your Christmas tree. The bell also has a heart, it is printed print-in-place. You can also scale it Christmas bells collection :…
You can edit text with free software Autodesk Fusion 360. To edit text download .RAR file and follow instructions in HOW-TO PDF. Personalized Christmas Card is suitable for C6 envelope 114x162mm. Tips: - Print STL file if you do not want…
This print is a threaded to be a standard mason jar lid. Just put some bait in the jar and the pests fly in and are unable to find their way out. Has a convenient spot to hang the trap should you want to. I suggest not using sweet bait as…
I noticed recently that the original model has disappeared from Printables and yet a fair amount of people I've seen online wanted to make this themselves. Made a couple of these masks myself and I love them. Unfortunately, I don't have…
Ornament hanger for cristmastree
Winter, and Christmas in particular, is a time for coziness and tranquility, and nothing achieves this better than lights and lighting. With this atmospheric and festively decorated fireplace on the shelf or windowsill, the Christmas…
Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Ho Ho Ho! 🎄 Imagine a Christmas tree made of two parts that twist into each other – yep, you twist it into place. This creates an impressive vortex illusion , making the tree look almost magical. Caution: The illusion is so captivating,…
Protection For Radiomaster BOXER Controller Gimbals
Inspired by the Raylite plastic Christmas church. My Bubba always put one of these out at Christmas. I have no idea whatever happened to hers so I decided to recreate my own. I pieced this together from images I found on the net. Not an…
Christmas ball for hiding surprises. Diameter 80 mm. The model is designed so that the individual halves are held together by a simple thread. I print threaded on a backing with supports, but it is possible to print the other way around.
Christmas ornaments in the shape of balls. Available in three sizes: 40, 60 and 80 mm. Different number of double ribs (depending on the size of the ball): 6, 10 and 14. Rib width 3 mm. Print the bottom part with a support so that the…
This replacement coffee maker lid was designed to replace a broken original. It fits perfectly, as shown in the picture. The pictured prototype is printed in PLA, but I expect to print the final verion in PETG for improved heat…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
This time, I’ve prepared a tree kit. Each tier is based on the design of my previous snowflake model , so it is again compatible with yout brick system or similar building systems. I managed to calibrate my own printer better, and now the…
8 variations of Christmas tree ornaments. Single and double ribbing. 3 sizes: 40, 60 and 80 mm. Print with supports on the plate to increase print stability.
This beautiful ornament is designed in Fusion360. I got inspired by Harry Potter and Philosopher's stone to create two version of winged key. You can find separate STL models as well as STEP file of all 3 parts to adjust or remix. The…
A No face mask from Spirited away movie. 3 parts
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Christmas stormtrooper is great as a Christmas ornament, a key chain accessory or a Christmas present for a Star Wars lover. NOTE: Image is it printed at 150% scale If you want to use a 0.4mm nozzle you will need to increase the size to…
Christmas is coming and I continue to create new designs of Christmas bells. I hope you like at least one of the collection.If you have suggestions for a new design - shapes, ideas, write them down, I will create a new bell Christmas…
Another Christmas bell, with a new pattern, I hope you choose from the Christmas bell collection . I started to enjoy designing them, maybe there will be more with the upcoming Christmas Collection:…
Mount your T818 wheel to the wall or your rig. Insert a quick turn to the right will click it in and lock it in place. To remove, turn the wheel 20 degrees to the left and pull straight out. The notches in the face indicate the lock and…
Key points 1 Uses household tissues as the filter. 2 Large filter area. This reduces the flow rate per area and allows more layers (12 – 16) to be used, thus increasing filtration efficiency. 3 Comfortable because the only thing against…
08/2025: Updated 3D models for the screw and the center piece. The screw is now hollow! With this parts you can convert your empty Prusament spool to a Masterspool. I tested several other Prusament to Masterspool adaptors, but none of…
This print turns a mason jar into a watering station for bees, or if it is legal in your area an open feeding station. You need to print 1 base and 8 of the grid pieces. The grid pieces are sized such that the bees can't get into the…
Be aware that the printing parameters reflect for only a half sphere! I recommend not to print the whole thing at once to spare you the trouble of printing unnecessary supports and their removal of it. I recommend to print two half…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…
History Hernhutters The Hernhutters were brothers who originally (anno 1722) came from the former Czechoslovakia, but were persecuted there, fled and ended up in Hernhut in Germany. In that town they built a settlement that has grown into…
This is one of the easiest of my models to print. You will need supports. Use grid supports on build plate only. An overhang angle of 40 degrees works very well. The loop at the top prints very well without supports. I recommend adding a…
This set of beautifully designed candle lamps is perfect for festive celebrations. Each lamp is designed to protect candles from wind, ensuring they burn brightly for up to 3 hours. The lamps are optimized for quick printing in vase mode,…
Christmas ornament "Minion 3D". Print on PLA, then spray with gold decorative paint. More difficult to print, especially when working with supports.
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
Ho Ho Oops! 🎄 Imagine a Christmas tree so incredibly knotted/tangled that even Santa gave up trying to fix it - and that’s exactly how this design came to life! A tree full of loops, twists, and knots that look as if one of the reindeer…
Gimbal protector for Radiomaster TX16S (MKI or MKII) / Jumper T16 radio (should work, not tested). Protector is from a one piece with a grip for easier removing. LED charging indicator is fully visible while the protection is on. Bigger…
Alternative stick ends for the Radiomaster Pocket. Requires 2 M3x8 hex screws (on for each stick). Recommended to print with a brim, due to the small bottom area.
Hello, Welcome to my profile, full of models and miniatures :-) I have a Master Yoda from Star Wars for you for an exhibition or diorama. Very cool figures. It is suitable for coloring. My children absolutely love it :-). Important: If…
Schwibbogen mit Ständer.
Meet the Mini Geometric Christmas Tree — a sleek and modern take on the classic holiday symbol! 🎄 Height: 15 mm ✨ Perfect for minimalist Christmas setups, dioramas, or small-scale decorations 🖤 Clean lines and geometric design make it a…
Christmas is coming and I continue to create new designs of Christmas bells. I hope you like at least one of the collection. Christmas bells collection : https://www.printables.com/@ThorinOakenshield/collections/1878739
A friend of mine asked me to make him a hook for his 22mm CPAP hose. I was not happy with the existing models, so I quickly made this lightweight design for him. The hose snaps in nicely and sits firm but not too tight. There is one…
I wanted a small handle for my Radiomaster Zorro to make it easier to carry when it wasn't in its case. There are two versions, one with holes to screw into with some M2 bolts and one for threaded inserts to go in. Both versions need 2 x…
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: angel bell fish heart santa skate snow glove snowman tree wreath – Czech – Kolekce 30 vykrajovátek na vánoční…
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
This model will support the NI Maschine Mikro mk3 on your desk, holding it up at a 20-degree angle in order to better see the LCD screen and buttons, and also making it a little more ergonomic for finger-drumming at arms-length. The…
Español: Estuche de mascarilla quirúrgica plegable con imanes. Se necesitan 4 imanes cilindricos de 8x3 mm English: Foldable surgical mask case with magnets. Four 8x3 mm cylindrical magnets are required
A collection of 30 Christmas cookie cutters. All models are in three sizes - 3.5, 5.5 and 7.5 centimetres. Collection includes: candle candy church comet glove heart pig present snowman sock – Czech – Kolekce 30 vykrajovátek na vánoční…
I did a quick remix of 3D Printy Print-in-Place Twisty Puzzle - Christmas Tree to have both simple and difficult versions of the Xmas case. This is the latest version of each puzzle. This is not the full print in place puzzle, you will…
3D printable model of two Gangle's masks. Printing instructions Everything is configured in the 3MF file, but I highly recommend at least adding more perimetres , because you'll be doing a load of sanding. And for best result supports are…
A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.
This is technically one of my “Swoop” designs, but it looks like diamonds to me (or the Eye or Sauron, you pick). It's the last ornament in this series. I have many other series left to publish. I plan to publish one Christmas ornament a…
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: You can print a container for the gas mask in a variant with a biohazard symbol or instead of the biohazard symbol…
This is my entry to the Sindoh Christmas Decorations Spare Parts - Design Challenge . In keeping with the theme I've created spare parts to repair Christmas ornaments. We've all been there. Ornaments that have a lost cap and/or hanger (I…
Native American Design Elements Santa Skulls 3 Christmas Ornament
The (Almost) Mathematical Perfect Christmas Tree – Now in 3D Print! 🎄 If you thought perfect geometry and festive aesthetics don’t belong together, prepare yourself: this Christmas tree is engineered so precisely that even Pythagoras…
Keyboard stand for displaying Your keyboard on the side of the Cooler Master QUBE 500 Flatpack PC case. Two parts for easier print. May need a liitle bit of supports on overhangs. Models already oriented in intended print positon.…
This is a simple TPU and hardshell case for the RadioMaster RP3 receiver to keep it safe inside your quad. The white inner part was printed using TPU, the outer shell was printed to using PETG.
Bola de Navidad Es una bola diseñada para insertar una imagen de una litofania. La bola es una semiesfera con un agujero trasero para insertarle una luz led del árbol de navidad y poder disfrutar de la imagen en el árbol. Impreso en PLA…
As an experiment in transparent printing, I embossed hexagons into the lid to make it half as thick except for the ribs between the hexagons, and printed in 3D Printing Canada PC+ Transparent filament using a max of 20 mm/s for the bottom…
Santa Skulls 4 Christmas Tree Ornament.
This stylish candle lamp is designed to shield your candle from wind while ensuring it burns completely for more then 2 hours. The lamp consists of a base and a protective shade, both optimized for printing in vase mode, which drastically…
Meet the Modern Christmas Angel — a graceful and minimalist decoration for the holiday season! 👼 Height: 135 mm 🕯 Designed to fit the LED Flame Tea Light Candle (D37.2 × 36.6 mm) ✨ The elegant voronoi structure creates a warm glowing…
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
There are 3 other ornaments in this series – a finial, a topper, and a “stretch” ornament. I'll be publishing a new ornament every day this season! Follow me to stay up to date. I've provided my PrusaSlicer project files (3MF) and GCODE…
A simple, easy to print holder for plastic mason jar lids. This model is a relatively quick print which requires no supports. The model is also available at OnShape . There are two distinct models: one for standard jars and one for…
Decoration de noel bicolore : maison - Two-tone Christmas decoration : house
![Ornament Cap and Hanger - Christmas Spare Parts [Shindo Design Challenge]](https://media.printables.com/media/prints/496290/images/4041262_829f322f-285c-47f9-ae74-f4a91e3f6da7/ornament_on_tree_wtext.jpg)
