P
PrintablesPitel
Sonic Amiibo tag
Don't forgot to add M601 pause around 3 mm and color change for the logo!
- Downloads
- 38
- Likes
- 3
- Rating
- 3.5
Search results: mii
301 models
P
Printablessub3d.de
Apple Car Play seat mii to apple car play
This is an adapter for the Seat MII for the original display holder Apple Car Play
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesNebulaNoob
Team Sonic Figurine Set, SSBU Sonic, Tails, Knuckles, & Super Sonic amiibo figures
First set of Sonic figures based on Team Sonic. Set inludes · Modern Sonic (SSBU Pose) · Modern Tails · Modern Knuckles · Super Sonic (SSBU Pose) (Don't have pics sorry) · Super Sonic V2 (Original Pose) All my figurine models will always…
- Downloads
- 3,343
- Likes
- 311
- Rating
- 4.17
P
PrintablesUlrik Kristoffersen
Oil Funnel for VW Up! + Skoda Citigo + Seat Mii
Oil funnel for VW Up! - Locks into place so you don't have to balance a funnel while pouring oil. Will 100% Fit the VAG triplets (Up!+Citigo+Mii) Test fitted on a VW Golf 6 TSI and will also fit this. Will likely fit a large range of…
- Downloads
- 2,211
- Likes
- 202
- Rating
- 5
P
PrintablesNebulaNoob
Sans Amiibo Figure
I lost the files for my original Sans figure so I thought "might as well do it all again" No special print instructions, I'd print it around 3 inches but aside from that go nuts. Will update with photos when done painting All my figurine…
- Downloads
- 1,787
- Likes
- 121
- Rating
- 4.8
P
PrintablesMaking things up
amiibo - NFC tokens - Super Smash Bros. series (all 91 characters)
Highly collectible 3D printable NFC tokens for use with Nintendo video game consoles. Designs for all 91 amiibos in the Smash Bros. series. Note: Prints in one part! You're expected to insert the NFC tag halfway through the print. No…
- Downloads
- 1,192
- Likes
- 247
- Rating
- 5
P
PrintablesRob
Phone Holder - 2 versions - for VW Up! Skoda Citigo Seat Mii
I recently got a VW UP and I really like the USB port mounted on the dashboard but I didn't get the original mobile phone holder accessory with the car. I think this will work with most UPs that have the USB port in the upper dash and…
- Downloads
- 976
- Likes
- 66
- Rating
- 5
P
PrintablesSanteridahlia
Sans Amiibo Figure improved
Having printed the original NebulaNoob model as a 20cm tall statue I found major issues with the insides of the model that made printing take way more time and in general produce less pretty results when printed at a larger scale, so I…
- Downloads
- 962
- Likes
- 60
- Rating
- 5
P
PrintablesRiNax
CarPlay Display Mount for Volkswagen Up! Skoda CitiGo and Seat Mii (pre facelift)
You need to unscrew the two Torx from the original Base and replace them with 25mm M4 (DIN 912 fits perfectly for my model). Bonus: if you delete the electronics from the base you can put the cables for the unit through the base and my…
- Downloads
- 952
- Likes
- 44
- Rating
- 0
P
PrintablesNebulaNoob
Team Eggman Figurine Set: Eggman, Metal Sonic, Infinite, E102-Gamma, Sage, and Chaos Amiibo Figure's
Fourth set of Sonic figures based on Dr. Eggman and other Sonic villians. Set includes · Modern Eggman · Metal Sonic · Chaos · E102-Gamma (Still Painting, will update when done) · Infinite (Both with the blocks as a base and Infinite and…
- Downloads
- 909
- Likes
- 93
- Rating
- 5
P
PrintablesSteve
Power Moon Amiibo (Super Mario Odyssey)
Just needs some glue to assemble, pins are included for alignment. Filament shown: Hello3D – Matte Blue PLA 3D Printing Canada Value PLA – Red, Orange, Black AMZ3D PLA – Dark Violet Print Settings Layer height: 0.12mm Infill: 15%
- Downloads
- 904
- Likes
- 215
- Rating
- 4.93
P
PrintablesJace1969
Spiderman Helmet MIII
Hi Todd, this was all I could do. Not sure how easy it will be to fit over your head due to the size of the neck ring. I've removed it from the second model incase that helps but it may need modifying further. I have an idea which i'll…
- Downloads
- 881
- Likes
- 163
- Rating
- 5
P
PrintablesRyan TT
Korok Amiibo (Includes all 9 variants)
Amiibo figures of all 9 Korok variants. I wasn't happy with any of the Korok models I found online, so using the original game files I remade each one by hand. None of these files contains anything pulled directly from the game, but each…
- Downloads
- 794
- Likes
- 124
- Rating
- 5
P
PrintablesNebulaNoob
Kris Amiibo Figure
A custom figure of Kris from Deltarune! The model for this figure was uploaded for free on Sketchfab by Vibapop, check them out below! https://sketchfab.com/3d-models/deltarune-037d273d617644a09d5b23b738b03d2b All my figurine models will…
- Downloads
- 730
- Likes
- 91
- Rating
- 5
P
PrintablesNebulaNoob
Koopaling Custom Amiibo Figures
All Seven Koopalings, along with the clown cars they drive! All Koopalings are printed in 2 parts, the car and the koopa. The Clown Car should sit at around 2 inches tall to match a Bowser Jr amiibo (however I recommend double checking…
- Downloads
- 721
- Likes
- 108
- Rating
- 3
P
PrintablesNebulaNoob
Team Dark Figurine Set: Shadow, Rouge, E123-Omega, and Super Shadow amiibo figures
Second set of Sonic figures based on Team Dark. Set includes... · Shadow (may make a second version with a less intrusive support pole) · Rouge · E123-Omega, Replacement Minigun, Base, and Outer Base (STILL PAINTING WILL UPDATE PICTURES…
- Downloads
- 641
- Likes
- 101
- Rating
- 5
P
PrintablesarcDaniel
Ikea Skadis amiibo stand V2
Update 27.03.2023: I increased the inner circle a little bit Update 05.03.2023: I have completely redone the model in freecad and now it is a lot cleaner. There is an other one here on printables, but this I found too bulky and I didn't…
- Downloads
- 505
- Likes
- 130
- Rating
- 5
P
PrintablesLiving in my parents basement
Link Amiibo
3D scan of "link archer amiibo" Works best with resin printer. A like and follow would be appreciated. :)
- Downloads
- 491
- Likes
- 55
- Rating
- 5
P
Printables3Dtortilla
Oatchi Amiibo
After finishing Pikmin 4 I decided I wanted to make my own life size Oatchi Full Oatchi model is available if you wish to print it all in one go. If you only have a single filament printer all the files are sorted in folders by print…
- Downloads
- 490
- Likes
- 96
- Rating
- 5
P
PrintablesRiNax
Mount for Chinese Car Play/Android Auto unit | VW Up! Seat Mii Skoda Citigo Seat Ibiza | Navigon
Use it to mount a multimedia unit on the original Navigon mount in your car. Fits: Volkswagen Up! Seat Mii Seat Ibiza Skoda CitiGo
- Downloads
- 450
- Likes
- 27
- Rating
- 5
P
PrintablesFractalDreams
Amiibo Stand for IKEA SKADIS Pegboard
I wanted a way to display a couple amiibo figures I have on SKADIS pegboards, and saw this design on Thingiverse that uses the shelf hooks from some of the other SKADIS accessories. I like the design, but I found that because the stand…
- Downloads
- 417
- Likes
- 86
- Rating
- 5
P
PrintablesMarauderz
Stackable Amiibo / Figure Display Shelf
(20th Oct 2025) Updated with slight design changes available here:- https://www.printables.com/model/1451045-blokeesamiibofigure-stackable-display-shelf-v2 This is a stackable shelf I made for putting my Amiibos in a vertical tower to…
- Downloads
- 409
- Likes
- 112
- Rating
- 5
P
PrintablesNebulaNoob
King Boo Amiibo Figure
A custom amiibo of King Boo based on his design from the Luigi's Mansion series. To make him float, I used a clear plastic dowel, a pack of them can be found on Amazon for cheap. I've also included the custom decal for the top of the…
- Downloads
- 407
- Likes
- 68
- Rating
- 5
P
PrintablesNebulaNoob
The Kong Kollection: Funky Kong and Dixie Kong Amiibo Figure
A WIP Collection of some Custom Kong figures. Includes Funky Kong and the Wave Stand he rests on, and Dixie Kong and the Barrel she's on. Will update to include Crankey Kong and more in the future.
- Downloads
- 373
- Likes
- 52
- Rating
- 0
P
PrintablesNebulaNoob
Toadette Amiibo Figure
Custom figure for Toadette Edit 12/30/23: Added Toadsworth and plan to upload a new version of Captain Toad aswell. Will update cover photo once finished
- Downloads
- 333
- Likes
- 47
- Rating
- 0
P
PrintablesNebulaNoob
Cuphead Amiibo Figure
One of my first custom figures, Cuphead! May end up making a new pose in the future so stay tuned! All my figurine models will always and forever be free! If you see one of my models behind a paywall, either check back here or another STL…
- Downloads
- 318
- Likes
- 53
- Rating
- 0
P
PrintablesPeter Henriksen
Cartablet adaptor for Seat mii, vw up, skoda citigo
Made this for my wifes Seat Mii to fit the original phoneholder. Printet in Bambu ABS seat mii vw up skoda citigo cartablet
- Downloads
- 317
- Likes
- 28
- Rating
- 5
P
PrintablesNebulaNoob
Rayman Amiibo Figure
This model is my custom Rayman Figure I designed for a custom amiibo, included is the original mode, a version of that model in a tree, and a pre supported model (which you're mileage may vary on haha.) All my figurine and statue models…
- Downloads
- 297
- Likes
- 39
- Rating
- 0
P
PrintablesNebulaNoob
Madeline Amiibo Figure
This custom Madeline amiibo figure is one of my personal favorites, I think the dynamic pose and paint job came out perfectly. The model is supported with a clear plastic dowel, you can find a set of these on Amazon for pretty cheap. The…
- Downloads
- 289
- Likes
- 62
- Rating
- 5
P
PrintablesNebulaNoob
Pac-Man Figure Collection - Pac-Man and Ms. Pac-Man Amiibo Figures
A work in progress collection of custom Pac-Man figures. Currently it's just Pac-Man and Ms. Pac-Man, but eventually I plan on making a figure of all four ghosts and one of Toc-Man from Pac-Man World.
- Downloads
- 281
- Likes
- 48
- Rating
- 0
P
PrintablesBrian DiGioia
HSW Amiibo Holder
Remixed from the Ikea Skadis amiibo stand for use on your HSW.
- Downloads
- 273
- Likes
- 78
- Rating
- 4
P
PrintablesNebulaNoob
Silver and Blaze Amiibo Figure
Fifth set of Sonic figures featuring two future furries Set includes · Silver · Blaze (May update this in the future with Super SIlver and Mephiles if I ever make them) All my figurine and statue models will always and forever be free! If…
- Downloads
- 251
- Likes
- 46
- Rating
- 0
P
PrintablesFerdinand777
marie and callie splatoon amiibo
the two great friends who were always together and saved the world
- Downloads
- 246
- Likes
- 18
- Rating
- 0
P
PrintablesBryce Dixon
Amiibo Wall Shelf (6 Sizes)
Print sideways to not need supports. Slice diagonally for cleaner top layers and to fit on a smaller build area. Screw hole is sized for a countersunk #6 imperial screw or 3.5M metric screw.
- Downloads
- 241
- Likes
- 60
- Rating
- 5
P
PrintablesRumble N-Key
Base Amiibo Custom SSB
Base para Amiibo Custom de Super Smash Bros preparada en 2 partes, con orificio para introducir una NFC Tag en el interior. En caso de querer imprimir una figura pegada a la base, puede hacerse fusionando el modelo deseado y la base en…
- Downloads
- 240
- Likes
- 14
- Rating
- 4
P
PrintablesNebulaNoob
Game and Watch amiibo bases
THIS IS NOT MY MODEL!!!! Thingiverse broke the original download for these models, I luckily had a back up. The original was Thing:1038961, the original link is below (it just leads to a 404 page) I'm reuploading these as they are the…
- Downloads
- 239
- Likes
- 22
- Rating
- 5
P
PrintablesGeorg
Amiibo Coin Box + Coins
Amiibo box and Amiibo coins This amiibo box is a remix of sanka's amiibo coins box. I changed the size for fitting 18 amiibo coins and added separators between the coins. I also added an inlay amiibo logo. This logo is taken from the…
- Downloads
- 237
- Likes
- 48
- Rating
- 5
P
Printablesgeit_de
Mario Question Mark Block Amiibo Stand (Customizable)
This is my attempt to create a Mario question mark block type Amiibo stand. It prints easy without any supports. Use 0.2mm layer height and 7% infill with a triangular infill and 3 walls to make it beefy. The question mark object needs to…
- Downloads
- 236
- Likes
- 52
- Rating
- 0
P
Printableslucky boi
Mario amiibo multicolor 4 color
The following colors were used: red, blue, white, brown. Unfortunately due to the lack of skin colored filament I ended up using pale white filament. if you do have beige filament I recommend to use that instead of white filament.
- Downloads
- 229
- Likes
- 20
- Rating
- 0
P
PrintablesCADScott
Unique Amiibo Coins - Over 50 Designs and Growing!
With over 50 designs, there are most of the popular and useful Amiibo coins here, ready to add your NFC215 tag. These can be used on any device that supports Amiibos, from Wii U, 2DS and 3DS to Switch. Much easier to carry on the go, and…
- Downloads
- 228
- Likes
- 18
- Rating
- 0
P
PrintablesMatthew Greenfield
Shadow the Hedgehog Amiibo figure(separated pole/body)
Saw somebody in the comments section of the Team Dark amiibo model set ask for a version with the pole separated from Shadow. Since I was bored, I loaded the STL up in Blender and was able to split up the pole model and the Shadow model.…
- Downloads
- 226
- Likes
- 15
- Rating
- 5
P
Printablesjmh
Amiibo Coin
This should fit 25mm stickers. Measured the sticker space to 26mm, with a total diameter of 28mm for the coin.
- Downloads
- 223
- Likes
- 17
- Rating
- 4.5
P
PrintablesGermanDarknes
amiibo Hex Figure Base
amiibo Hex Figure Base with different heights. Includes a variant for the Diablo Treasure Goblin. I've included the OpenScad files, there you can adjust the height in mm. There's also a wide version available, of all amiibo 2 didn't fit…
- Downloads
- 217
- Likes
- 68
- Rating
- 5
P
PrintablesChrisTheViolaNerd
Bowser's Keep Amiibo Display Base
My second amiibo display base design. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: .1mm Infill: 20% Notes: I printed with a .1mm layer height at 40mm/s because I wanted all of the detail to be…
- Downloads
- 215
- Likes
- 56
- Rating
- 0
P
Printablesjmhertlein
Amiibo Stands for Full Amiibo Collection
I printed about 250 of these on my Prusa MK3S+. I found the best results came from using Monoprice PLA (https://www.monoprice.com/product?p_id=15835). I used 0.2mm layer height on SPEED setting in PrusaSlicer. For all stands: 215C, 7%…
- Downloads
- 206
- Likes
- 36
- Rating
- 0
P
PrintablesChrisTheViolaNerd
Castle Dedede - Amiibo Prop
A functional and decorative piece to display your amiibo collection. You can display up to 8 amiibo figures and store different accessories inside. I've provided different stl's for the bottom part in case you want to print it all in one…
- Downloads
- 204
- Likes
- 43
- Rating
- 5
P
PrintablesNebulaNoob
Alph and Louie Amiibo Figure's
I lost the files for my original Alph figure so I thought "might as do it all again" (also throwing in Louie for fun lol) The original figure used an official Olimar amiibo helmet, however since that isn't viable for recreating this in…
- Downloads
- 199
- Likes
- 33
- Rating
- 5
P
Printablesakmiller01
Modular staggered Amiibo display stand
I designed this Amiibo display stand because many of the others online were either too large for my printer, or took way too long to print. It comes in two pieces, a stand end, and the main stand piece. You will need to print 2 stand…
- Downloads
- 198
- Likes
- 50
- Rating
- 0
P
PrintablesAaronAZ623
Super Metroid Save Amiibo Stand
This was modeled after the Super Metroid save stations. There are two different versions, one split and one whole. The recommended way is to print the split models without supports and then superglue them together. Alternatively the whole…
- Downloads
- 190
- Likes
- 56
- Rating
- 5
P
PrintablesJustoad
Amiibo Display Stand
This model is an Amiibo Display Stand. This model is a remix of a model made by “PMRY3DPRINTS” on Thingiverse. I made the opening for the Amiibo base bigger, reduced the thickness of the bottom of the stand, and made the model a bit…
- Downloads
- 186
- Likes
- 43
- Rating
- 0
P
PrintablesChrisTheViolaNerd
Super Mario Amiibo Castle
All parts were printed on an Ender 3 printer.
- Downloads
- 184
- Likes
- 90
- Rating
- 5
P
Printablesgeit_de
Mario Wall Style Amiibo Stand (Customizable)
This is my attempt to create a Mario wall type Amiibo stand. It prints easy without any supports. Use 0.2mm layer height and 7% infill with a triangular infill and 3 walls to make it beefy. The brick joint area needs to be printed four…
- Downloads
- 177
- Likes
- 50
- Rating
- 0
P
PrintablesNebulaNoob
Bomberman Amiibo Figure
I lost the files for my original Bomberman figure so I thought "might as well do it all again" If possible try to print with clear resin for the support pole in the future. May try and make another version with the support pole in a less…
- Downloads
- 176
- Likes
- 34
- Rating
- 0
P
PrintablesJan Suchý
HR Richter držák - Škoda Citigo, Seat Mii, VW UP!
Upraveno pro použití navigace https://www.aliexpress.com/item/1005004865198233.html?spm=a2g0o.order_detail.order_detail_item.4.10be636893FN9d&fbclid=IwAR1T28ESixCD5mmZuOtxk7f5PXLtn2wc0LULY0BBeizbumiF6x48bzStoPk&gatewayAdapt=glo2deu na…
- Downloads
- 174
- Likes
- 12
- Rating
- 5
P
PrintablesNebulaNoob
Marx Amiibo Figure
Custom Marx amiibo, included is Marx himself, a supported version of the model (don't forget to double check after slicing) and a custom decal design for the top of the base, to match the other Kirby figures May make a second version of…
- Downloads
- 164
- Likes
- 21
- Rating
- 0
P
PrintablesLinkr
Zelda Amiibo Card Holder
Needed a safe place to store the Amiibo cards i made, so i put this together. they hold the credit card sized (85.5mm x 54mm) NFC cards you can easily find on amazon. there are currently 25 Zelda Amiibos, including the new TotK Amiibo and…
- Downloads
- 163
- Likes
- 32
- Rating
- 5
P
PrintablesSerentos
Amiibo Mini Card Keyring Keychain Holder for Zelda Tears of the Kingdom / Breath of the Wild (Updated)
NOTE: I bought another set for a family member, and found the cards were ever so slightly sized differently. I created a second design from scratch for the 1mm cards, and am much happier with the results. Painting on seams so they aren't…
- Downloads
- 160
- Likes
- 48
- Rating
- 5
P
PrintablesNebulaNoob
Waluigi Smash Amiibo Figure
A custom Waluigi figure for the Smash Bros series. I had issues printing the tennis racket so there may be a new version later down the line. Category: Toy & Game Accessories
- Downloads
- 155
- Likes
- 41
- Rating
- 5
P
PrintablesAaronAZ623
Metroid Dread Amiibo Stand Wall Platform
This was modeled after game screenshots so I had to get creative for some parts, especially the plugs that are used to cover up the screw holes. Plugs are are interchangeable if you like to use just one or both variants. Print Settings…
- Downloads
- 153
- Likes
- 45
- Rating
- 5
P
PrintablesNebulaNoob
Kirby Amiibo Figure (Smash Ultimate Pose)
A custom amiibo based on Kirby's Smash Ultimate pose The figure is being held up my a clear plastic dowel, you should be able to pick up a pack of them on Amazon for cheap. All my figurine and statue models will always and forever be…
- Downloads
- 152
- Likes
- 28
- Rating
- 0
P
PrintablesNebulaNoob
Mr. L Amiibo Figure
The mysterious and elusive Mr. L... I wonder who's behind that mask? Included is the Mr. L figure itself, and a pre-supported version (it's auto-supported so make sure to double check) I've also included the custom decal for the top of…
- Downloads
- 151
- Likes
- 37
- Rating
- 5
P
PrintablesAaronAZ623
Samus's Gunship Amiibo Holder from Metroid
The model is scaled up by 1000% from original and a cutout was made to hold an Amiibo. I also filled in a few spots around the three thrusters in the model to make printing easier. Print Settings Rafts: No Supports: Yes Filament: N/A PLA…
- Downloads
- 147
- Likes
- 34
- Rating
- 0
P
PrintablesCst 102413
Figurine amiibo de Marina Coralie Splatoon
Voici Marina (Coralie), j'ai fais le maximum pour qu'il resemble à l'amiibo Avec deux version l'une avec support et l'autre sans. De rien <(^^)>
- Downloads
- 139
- Likes
- 10
- Rating
- 0
P
PrintablesAntToeKneeOh
Amiibo Display Stand
I wanted to display my Smash Amiibos but I couldn't find one I liked so i modeled my own based off a reddit post I saw. https://imgur.com/gallery/P68cT/new I also created a variant to the display stand to hold all 4 versions of the Game…
- Downloads
- 137
- Likes
- 19
- Rating
- 5
P
PrintablesRan Bao
Schmidt Bender PMII 5-25x Throw Lever
The CAD can be found from https://github.com/eamars/PrintableThrowLevers/tree/main
- Downloads
- 136
- Likes
- 3
- Rating
- 0
P
PrintablesMM Printing
Mr. Game & Watch Amiibo
Description For a while now, I have wanted to 3D print a working amiibo, but most amiibos are not well suited to FDM printing. So I had to make the Mr Game & Watch amiibo from Smash Bros. So far I only have the standard figure made but…
- Downloads
- 135
- Likes
- 7
- Rating
- 0
P
PrintablesDesti
Window Crank Handle Knob for Seat Mii Car
Both knobs from handle of my car window have broken plastic that holds them in place and everytime i wanted to open or close window this knob detatch and stays in my hand after one turn. So to use the fact that i started learning some 3d…
- Downloads
- 131
- Likes
- 7
- Rating
- 0
P
PrintablesZachryWD
NFC 25mm Tag Holder, Amiibo - NTAG215
Created to organize my Amiibo backups. Important note on the cap, increase / decrease the X and Y scaling for the cap by 0.5% until the print firmly snaps into place. This is an interference fit and every printer is different. You should…
- Downloads
- 131
- Likes
- 17
- Rating
- 5
P
PrintablesLCSModels
Mobile Phone Holder for VW Up!, Seat Mii and Skoda Citigo
Introduction The navigation system in my VW Up! from 2013 does not work anymore. The system is terribly old and a replacement is rather expensive. Therefore I designed this bracket connector. This should apply to all older versions of the…
- Downloads
- 130
- Likes
- 9
- Rating
- 0
P
PrintablesNebulaNoob
Petey Piranha Amiibo Figure
Quick thing! The details in the mouth like the teeth and tongue currently aren't present as I added those in with clay after printing. I will more than likely update the model in a little bit to include them. You also may need a small…
- Downloads
- 126
- Likes
- 42
- Rating
- 0
P
Printablesbw42
Yarn Yoshi Amiibo Scan
3D scan of a Yarn Yoshi Amiibo done with my Matter and Form 3D scanner.
- Downloads
- 125
- Likes
- 16
- Rating
- 5
P
PrintablesNebulaNoob
Fi Amiibo Figure
A custom Fi amiibo, the model is ripped straight from Smash for Wii U cleaned up with a higher poly count. Fi is connected to the base using a clear plastic dowel and sprayed using a glossy clear coat. The sword in the back is connected…
- Downloads
- 124
- Likes
- 36
- Rating
- 0
P
PrintablesKhelian
Bookend Amiibo
Simple bookend, with a place to put any Amiibo. I printed it with a 1.0 nozzle and 20% infill on my Ender 3 because there is not much details, so it printed in less than 3h (instead of 9h with a 0.4 nozzle). I suggest putting a brim to…
- Downloads
- 122
- Likes
- 43
- Rating
- 5
P
PrintablesWeaver3294
Minimalist Amiibo/Pokemon Card Stand
I wanted a minimalist Amiibo card stand to display cards with my statue Amiibo. So I designed this in Fusion 360 to print quickly with minimal filament—prints in 30 min flat at .2 resolution.
- Downloads
- 122
- Likes
- 31
- Rating
- 4.33
P
PrintablesStar Blink
Amiibo-Stand
ENG: A simple Stand for Amiibo-Figures ----- GER: Ein einfacher Ständer für Amiibo-Figuren
- Downloads
- 121
- Likes
- 11
- Rating
- 0
P
PrintablesChrisTheViolaNerd
Amiibo Display Base
A simple display base for, 4 amiibo characters. Print Settings Printer Brand: RepRap Printer: Wanhao Duplicator I3 V2 Rafts: No Supports: No Resolution: .2 Infill: 10-20 Category: Video Games
- Downloads
- 120
- Likes
- 40
- Rating
- 5
P
PrintablesFerdinand777
bayonetta player 2 amiibo
an amiibo for smash, an umbran wich who has lost his memories can now be on your shelf ( the original model is in this page https://www.models-resource.com/3ds/supersmashbrosfornintendo3ds/model/64732/)
- Downloads
- 119
- Likes
- 18
- Rating
- 0
P
Printablesloclhst
Amiibo figure stand
Wanted to make my own take on the amiibo stands, this one you can print out a single stand, or multiple and interlock them together. Base is a bit thin where the figure sits, but it should be sufficient enough. If anyone needs it…
- Downloads
- 117
- Likes
- 19
- Rating
- 0
P
PrintablesTriple G Workshop
Donkey Kong Amiibo Figure 5-6 Color AMS
Donkey Kong amiibo figure with iconic red DK tie. Minimal supports. Great desk or shelf display. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
- Downloads
- 117
- Likes
- 12
- Rating
- 0
P
Printablesstrike171
Arsene - Custom Amiibo
Painted by hand for the body and base, the wings were airbrushed Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: Yes Infill: 15% Filament: Hatchbox PLA Blue Notes: Printed at .2 mm layer hight Print the wings with the…
- Downloads
- 116
- Likes
- 18
- Rating
- 0
P
PrintablesThijs Dortmann
Mount for Urvolax UR73C Carplay screen for VW Up, Skoda Citigo, Seat Mii
The Urvolax UR73C carplay screen comes with a mount that you can glue to your dashboard. As it was bought to replace the stock Maps&More screen in a Skoda Citigo, I wanted to bolt it to the same place where the original screen was mounted…
- Downloads
- 114
- Likes
- 9
- Rating
- 0
P
Printablesdocniner
Amiibo NFC Card Box
108x87mm box with 75 slits to store Amiibo NFC cards. Has a cover and is very barebone.
- Downloads
- 110
- Likes
- 9
- Rating
- 0
P
PrintablesRumble N-Key
Base Amiibo Custom TLOZ
Base para Amiibo Custom de The Legend of Zelda preparada en 2 partes, con orificio para introducir una NFC Tag en el interior. En caso de querer imprimir una figura pegada a la base, puede hacerse fusionando el modelo deseado y la base en…
- Downloads
- 108
- Likes
- 11
- Rating
- 2
P
PrintablesFerdinand777
Arch-Eve Origin/ Bayonetta 3 smash bros fanmade amiibo
a model i made to place an amiibo token underneath the figure, if someone could add the charms(because if i fix it to be printable the charms disappear), i would be really grateful because I'm not a profesional 3D modeler
- Downloads
- 107
- Likes
- 12
- Rating
- 0
P
PrintablesNebulaNoob
Ravio Amiibo Figure
Custom Ravio Figure, This is a heavily modified version of Ravio from Hyrule Warriors to make him closer to the original Link Between Worlds artwork. I've also included the custom decal for the top of the base, just print it out on glossy…
- Downloads
- 106
- Likes
- 26
- Rating
- 0
P
PrintablesSanka
Amiibo coins Box
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5UV4wGnxsqR Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 0,2 Infill: 20% Filament: Tinmorry PLA Red, white,…
- Downloads
- 105
- Likes
- 26
- Rating
- 5
P
Printablesusercode0
40 Slot SD Card/Amiibo NFC Card Box
This 3D-printable model is designed to hold up to 40 SD or 40/80 Amiibo NFC cards. The slots on the Amiibo cards are a bit loose. It's made for standard SD cards, not microSD. Optionally one variant of the base contains a little trifoce…
- Downloads
- 105
- Likes
- 7
- Rating
- 0
P
PrintablesThomPatterson
Amiibo Coin Holder - Double Sided
Fits a 25mm NFC coin with room for cover art on both sides.
- Downloads
- 103
- Likes
- 16
- Rating
- 5
P
PrintablesHalfDecentEngineer
Wall Mounted Minecraft Grass Block Amiibo Stand
I found this model on Thingiverse and it was too perfect not to turn into a wall mounted Amiibo holder for my Minecraft Amiibos. I printed these on my Prusa MK3S+ using Overture PLA filament and 30% infill on all pieces.
- Downloads
- 98
- Likes
- 58
- Rating
- 5
P
PrintablesNebulaNoob
Hat Kid Amiibo Figure
A custom amiibo figure of Hat Kid from A Hat in Time! This model was ripped straight from the game, with the pose being inspired by Smashified (I may make another variation with the umbrella in the future haha) All my figurine and statue…
- Downloads
- 97
- Likes
- 18
- Rating
- 0
P
Printablesgotno
iPod Classic 5th generation backpack for 1Mii bluetooth transmitter
This is a little case I put together to give my iPod Classic 5th generation (iPod 5g/iPod video) a backpack to hold a 1Mii bluetooth transmitter/receiver, instead of just letting it dangle around and potentially get damaged or damage the…
- Downloads
- 96
- Likes
- 25
- Rating
- 0
P
PrintablesDaWoJnA
Amiibo coin with paracord loop connector
A remix of my favorite sample swatch to nicely fit a 25mm NFC-Tag Sticker, to get a compact storing for my amiibo backups. The paracord connector is from the original model. I printed it with Prusament PETG Clear. print settings: layer…
- Downloads
- 93
- Likes
- 29
- Rating
- 5
P
PrintablesNebulaNoob
Geno Amiibo Figure V2
"gee DapperIndividual, how come your Mom lets you have two Geno's" A new Geno amiibo based on MutationFoxy's render (linked below) Geno is one of my favorite Mario characters just based on they're design alone so I figured a new pose that…
- Downloads
- 92
- Likes
- 22
- Rating
- 0
P
PrintablesMarauderz
Blokees/Amiibo/Figure Stackable Display Shelf V2
Refresh of my stackable shelf design for figures cause now I have a pile of Blokees instead of Amiibos! Base plate is now a bit thicker to better handle the weight, rods are now looser with a 0.3 tolerance between the pegs and the hole.…
- Downloads
- 90
- Likes
- 19
- Rating
- 0
P
PrintablesKenny "XDr4g0nX" Verhoeven
Amiibo Coin
Amiibo's are great for the added gameplay and unlockables in multiple games from Nintendo. When using some NTAG215 NFC tags you can stick them to the inside of the base and cover it with a picture of your Amiibo of choice. Then lastly…
- Downloads
- 89
- Likes
- 20
- Rating
- 0
P
PrintablesTriple G Workshop
Mario Amiibo AMS/MMU
Mario Mario is the full, canonized name for the iconic Nintendo character, Mario, confirmed by creator Shigeru Miyamoto. 7 color AMS painted 3mf included. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
- Downloads
- 88
- Likes
- 21
- Rating
- 0
P
PrintablesNebulaNoob
Geno Amiibo Figure V1
This model is my custom Geno Figure I designed for a custom amiibo, included is the model itself and a pre supported model. I highly recommend printing this with a SLA Printer and not a regular FDM Printer, I cannot promise things like…
- Downloads
- 87
- Likes
- 23
- Rating
- 0
P
PrintablesCorey Ward
Cupholder Adapter for MiiR “Camp Cup” Mugs
I made this cupholder adapter to fit an insulated MiiR brand “ Camp Cup ” mug (with a handle) into a standard automotive cupholder. I originally designed it to fit perfectly into the front cupholders on my Tesla Model 3, but I've found it…
- Downloads
- 87
- Likes
- 8
- Rating
- 5
P
PrintablesAnkhadia
Amiibo Coin
I printed at 0.10mm. Put a color change at 0.40 and 2.30. Put a pause at 1.50 to insert tag. I had an issue getting the pause to work with Octoprint so for this I sent to the SD card. I have a blank one so you can add your own. Also this…
- Downloads
- 83
- Likes
- 12
- Rating
- 0