Counting matching models…
Ein Mikrofon mit Ständer und abschraubbarem Kopf zum Verschenken von Eventgutscheinen. A microphone with stand and unscrewable head for giving away event vouchers. Print instructions Gedruckt in PLA mit 0,2mm Schichtstärke. Länge: ca.…
Mikrofonhalter für Motorola Funkgerät Feuerwehr 0,2 Layer Wall 4-5 45% Infill 4 Untere und obere Schale
DIN 35 rail mount for a Mikrotik hEX S router Mounts on edge with ports facing forward. Integral clip to snap onto a DIN 35 rail. Router snaps into bracket without requiring fasteners. Design: Clip design based on…
an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.
Rack mount bracket for the Mikrotik RB5009 which can be used to mount the router to a 10 inch rack with 0.5 height units. M4 screws are needed to mount the brackets to the router. Remixed an existing model and changed the horizontal…
Mikrotik router/switch ears for rackmount since they are so difficult to buy. Fits my CSS326-24G-2S+RM no issue and should fit other router/switches from Mikrotik The distance between the holes is 25mm.
I recommend printing it in PETG The first version closes relatively flat at the top (e.g. if the party box is to be pushed under a table), the second version “mic higher” places the microphones higher. It would be nice if you post your…
Introducing the MikroTik Hex and Haplite Rack Mount Holder, the perfect solution for seamlessly organizing and safeguarding your valuable network devices. Designed to securely hold your MikroTik Hex and Haplite routers, this rack mount…
This is 19 inch rack mount for MikrotTIk router RB260GSP . There are 8 parts that need to be printed. Parts named 19-plug and 19-switch clip are not necessary. If printed part named 19-plug must be printed twice. I printed parts in PETG,…
Simple rackmount bracket for Mikrotik hAP, hEX and devices with the same formfactor(slightly smaller than hAP ac). Optional locking bracket also provided. Successfully printed on a Prusa MK3S using - Prusament PLA recycled - 0.30mm Layer…
Printer: Creality Ender 3 V2 NEO Filament: eSun PLA+ Orange Tailored for home and small office environments, this design incorporates additional options for mounting Mikrotik desktop devices on your network rack. If you have a design in…
Use this model if you do not want to see the hole in the rack when you mount single RB5009 router. This model can be printed on a print bed with the dimensions of 220mm x 220mm. Just rotate it on 45 degrees in your slicer before print.
A simple wall mount for mikrotik hAP lites.
Mount for MK hap ac3 on DIN rail. Holes for M4 screws. You can use DIN mount https:https://www.prusaprinters.org/cs/prints/19385-din-rail-mounts or https://www.prusaprinters.org/cs/prints/152136-din-rail-mount
A case form factor with dimensions similar to Mikrotik Hex for Haplite TC. Printed with Creality Ender 2 Pro using Kingroon Red PLA.
This is a 10 inch rack mount for the Mikrotik hEX S router, also fits the regular hEX (thanks therealodie for testing) might fit for others as well but thats untested. You'll need 4 M3x8 screws and 4 M3 nuts. Print Settings Supports: No…
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
Requirements M4 x 10 screw * 4 M4 threaded insert * 4 You might need a long and thin screw driver for fastening device onto upper mounting hole.
Eine angepasste Mikrofonhalterung (auch "Mauserl" genannt) für das Motorola MTP3550. Die Anpassungen habe ich rein im Bambu Studio vorgenommen, also nicht wundern, wenn die STL Dateien nicht hundertprozentig genau geschnitten und…
Die Homilies Wechselrichter können bei viel Sonne (viel PV Leistung) sehr warm werden. Der Wechselrichter sollte zwar automatisch abschalten, aber man tut der Elektronik etwas gutes, wenn man den Wechselrichter kühlt. Ich habe mir einen…
Simple rackmount bracket for Mikrotik hAP ac2 Material: ABS Layer Height: 0.20 mm Nozzle: 0.4 mm
Mikrofonhalterungen um das brechen der Kabel wie im Bild wenn das Mikrofon ans Kabel geklemmt wird zu verhindern. Kann einfach mit den normalen Schrauben fixiert werden, wie im Bild zu sehen. Standard ist mit einem 40,5mm Lochabstand, die…
Simple wall holder for Mikrotik - eg. RB960PGS
Vertical stand for Mikrotik roater board
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
Vytištěno z materiálu PLA, výška vrstvy 0,25 mm. Pro zuby hřebenu, pastorek a osu výška vrstvy 0,15 mm. Matice přilepit do jednotlivých dílců dle výkresu. Výkres sestavy stojanu (výkres ve formátu pdf uložený v souborech): Typ mikroskopu…
Custom Designed Wind Turbine - Version 1.1 12-24V The following description will help you understand the plans for my custom-designed wind turbine. The project is based on a hoverboard motor, which serves as the generator. Most of the…
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
Simple one-sided rack mount for Mikrotik hAP ac2.
MIKROTIK 2011 / 4011 - series - holder RACK 19''
Simple mount for small mikrotik router
Mikrotik Routerboard - Rack 19 Holder - No Supports needed
This model will support the NI Maschine Mikro mk3 on your desk, holding it up at a 20-degree angle in order to better see the LCD screen and buttons, and also making it a little more ergonomic for finger-drumming at arms-length. The…
A 10-inch rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't installed them. This…
Mikrotik hEX, RD2x0GS 10inch rack mount
A 19-inch, 2-part, modular rack mount for the MikroTik CRS305-1G-4S+IN switch. I have included two variations of this model, one meant to mount the switch if you already installed its rubber feet, and another for those who haven't…
Needs a bit of work to open the wall wart PSU and solder on the C14 connector. Only attempt if you are qualified to perform such work - mains voltage can be dangerous! OpenSCAD model is included - adjust if your IEC connector, etc. is…
Dear makers, we would like to share our DIN holder for switch NETGEAR or MikroTik Routers.GS308E. Consist of left and right holder. Overall depth ater installation is 81mm from DIN rail. Compatibility: NETGEAR (26 mm thickness): GS308E…
A reproduction of the Mikrotik K-79 for two switches. It requires heat set nuts for M3 bolts. It's a tight fit so you need to use the thinnest possible nuts. You can just take the single model and mirror it on the X-Axis or there's a .3MF…
Snaps onto the switch and locks into side vent holes with small pegs. Designed with 80mm fan and M3 brass inserts in mind. Supplied F3D file can be used to edit the fan size and brass insert holes. Best to be printed with fan side on the…
Faustmikrofonhalterung passend zu verschiedenen WeTech KFZ Ladehalterungen. Ich verwende die Halterungen mit einer Ladehalterung für ein Motorola CP040 und DP1400.
I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…
Dual MikroTik RB260 19 inch rack mount with holder for two PSU-s. Plug is not necessary, but if it is used, it must be printed in four copies. It is similar to THIS model. No supports are needed. To assemble everything 12 cap head screws…
Halter für Faustmikrofon, universell passend für die Faustmikrofone von Motorola GP900 und Kenwood TK290. Dies soll Antenne und Kabel, an denen die Mikrofone sonst gerne befestigt werden, entlasten. 3 Modelle: mech. Schnittstelle WETECH…
This alternative box is smaller, can lay flat, includes holes for wall mounting, includes rack holder. Printing doesn't require supports. Use a piece of tape on the board not to scratch it while wall mounting. Use hot glue and a piece of…
As it said in original model - can be printed on printer with 220mm x 220mm bed if you'll rotate object on 45°
I started working with 3D for a litle time, I did not find any Mikrotik rb750gr3 for 10 inch rack, so I made my own.
Made for the CRS310-8G+2S+IN, but compatible with any MikroTik switches that use 25x25mm rack ear mounts. Mounts to the MikroTik switch with 2x M3x8mm screws (countersunk) 5mm hole for using #8 Lath Screws to mount under your desk, or on…
This is a bracket for mounting a MikroTik hAP ax2 router inside a 19" rack. It utilizes the stand included with the router for providing solid mounting by screwing it to the bracket. Note: This is a router. Putting it in an enclosed metal…
Uchwyt regulowany do mikrofonu o średnicy 45 mm. Zastępuje duży, nieporęczny uchwyt montowany do stołu. Do skręcenia można użyć sruby fi 6mm i długości ok 30 mm.
I slapped these two models together to make a sturdy and centered 10 inch rack mount shelf for a MikroTik HEX S RB760iGS, but it might work with other models from this brand using the same sized housing. Careful with tolerances, I…
Hello, this is my simple Rack Mount for Mikrotik RB750 Gr3 HEX. I designed this mount to use 1U space ( little bit less to allow some play) Mount is made very thick and sturdy to allow pluging and unpluging of cables without holding…
Vocal mike holder- 5 mm clamping part. Conical shape at the top 34mm at the bottom 30mm, height 64mm. Držák mikrofonu - 5 mm upínací část. Kuželovitý tvar nahoře 34 mm dole 30 mm, výška 64 mm. Printed from pla+. I recommend the supports…
Mikrotik 10-inch rack ear for CRS310-8G+2S+IN and other 200mm units Includes two types of brackets: DeskPi RackMate (M5) 10" standard mini rack (M5/M6 and detachable Nut) Notice: This model was originally designed for CRS310-8G+2S+IN, it…
Allows for mounting of a MikroTik CRS305-1G-4S+IN almost anywhere using double sided sticky tape. The posts of the print go into the bottom of the router and then double sided tape goes on the bottom of the flat piece. Stick it where you…
A box I designed for L23UGSR-5HaxD2HaxD Routerboard. Has 1 open side for air ventilation. Uses M3 bolt to hold the board (M3x6-M3x14) will work. Has mounting points on the backside, which use M4 screws with max ~7mm diameter of the head.…
The switch itself is 1U-sized and even comes with hardware mounts for a 19" rack installation, but the 10" rack mount accessory is extra. With this mount you can utilise one of the included rack mount ear brackets to mount the switch to a…
Printed using eSUN PLA+ Black
Mikrotik RMK-2/10 compatible. It allows Mikrotik 10 inch rack router and switches to be mounted side by side in a 19 inch rack.
Vytvořeno ve Fusion 360.
Soporte para ROUTER MIKROTIK CRS125-24G-1S-2HND, para montar en rack de 19"
These brackets are easily lost but when you decide to attach wAP ac to the wall you will need one, so I designed one :) It is a nice fit and easy and fast to print, no support needed. I used 3 (0.4mm) perimeters and 1mm top and bottom…
This control knob was designed as a replacement for my mother's microwave. The original had a spring steel ring at the end, which i wanted to reuse to add some stability and strength, that's why the middle cylinder is narrower at the top.…
It is designed in 2 different parts, left and right which are screwed onto the switch.
This DIN-RAIL Adapter let's you mount a Mikrotik CRS326 (24-Port Desktop PoE-Switch) on a DIN-Rail. History This is Version #2 (2024-02-15) of mounting a Mikrotik CRS326 on a DIN-Rail. v1 worked, but was hard to get on the rail as the…
Dieses 3D-Modell ist ein praktisches USB Case, ideal für die sichere Aufbewahrung von USB-Sticks und kleinen SD-Karten. Das Design ist kompakt und leicht zu drucken, perfekt auf Reisen. Druckanweisungen: Optimiert für stützfreien Druck.…
Remix of Potted Pork's holder to hold the router horizontal (90 degrees from the original). Designed to mate with https://www.printables.com/model/152136-din-rail-mount using an M4 bolt and nut. Prints without supports. Quite a tight fit…
Gedruckt mit Ender 3 V2 Nozzel: 210 Bed: 60 Speed: 50mm/s Infill: 40% Gyroid Material: Geetch PLA
This is a mount for the Mikro Tik hEX RouterBOARD for mounting it vertically with the ports facing you and the USB facing down. Mounting is done with 2 M3 countersink screws 34mm from one another. The router should slide into place and be…
Lost the mounting bracket when I had to renovate so I created a new one. This model does not require supports and can be printed flat, with the text facing upwards. Might be compatible with CAP AC XL also, but I am unable to test.
A shelf for mounting MikroTik CRS305 in modular rack. Can be mixed and matched with: blank panels: https://www.printables.com/model/898351-rack-mount-empty-panels-small-printer-friendly patch panels:…
Vertical case for Mikrotik router . DIN rail mount
1U 10-inch rack mount for a MikroTik RouterBoard RB750Gr3 (installed without its case) and one Raspberry Pi 4 or 5. Requires M3 nuts and bolts for mounting the MikroTik RouterBoard. Requires M2.5 bolts for mounting the Raspberry Pi.…
Side buttons are accessible. You can print this on 400x400 bed diagonally. I did not want to have it in separate parts. I will do that in a future and attach it to this project.
Držák pro Mikrotik cAP ac. Montáž na zeď nebo strop za použití originálního plechu pro přichycení.
Self-locking Rack Bracket for Mikrotik hEX/hAP series. screws for mounting : per Case : 2 screws M2x12 (max) per Link : 4 screws M4x16 (max)
10inch rack holder for Mikrotik. With this it can be mounted only from behind, because hAP ac3 (ax3) is too wide to stitch it between rails. Printed from PETG, holes are 5.8mm, so M6 screws can be directly used. Use organic support for…
A compact 1U rack mount designed to fit the MikroTik hEX S (RB760iGS) into standard 10-inch mini racks Features: Integrated Power Cable Channel: Features a built-in routing canal and cable fixator to keep your power line secured All model…
A simple wall holder/mount for mikroTik power adapter
Simple DIN rail holder for router Mikrotik RB2011 nad similar (with similar mounting)
This is a remix of the original model by @Vafi . I have made several structural adjustments to improve the overall functionality and fit. Key Changes: Scale: Increased to 101% for better fitment/tolerances. Height Adjustment: Reduced the…
Fits RB450, RB450G and RB850Gx2 routerboards. I used the sizes from the official documentation and remade for printing with plastic. Official documentation: https://routerboard.com/CA150 http://i.mt.lv/routerboard/files/RB450case.rar…
Simple rackmount bracket for Mikrotik hAP ac and devices with the same formfactor(slightly larger than hEX and hAP). Optional locking bracket also provided. Successfully printed on a Prusa MK3S using - Prusament PLA recycled - 0.30mm…
Mikro Holder for VTech Kidi Super Star DJ
Print needs support on the “steps” which go to the mast-side when mounting. The curved inner part benefits from support, but also works without support. Print settings: ABS 0.2mm resolution 6 wall loops 25% infill selective support on…
A shelf for mounting MikroTik CRS305 in modular rack ( https://www.printables.com/model/79585-low-profile-modular-1u-relay-rack-mount-for-16-key ). Provided stl is suitable for mounting on the left side, but can be flipped for right side…
No special print instructions, just use material that is appropriate for your use case. I made 2 versions - one for double sided tape only and one with screwhole - you will need at least one side that is passthrough to be able to mount…
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
This is a fan duct to fit a 120mm fan to the underside of a Mikrotik CRS305 10G switch, for extra, quiet cooling of the processor and SFP modules. It attaches to the switch by sliding a pair of lugs into the switch's wall mount screw…
Корпрус MikroTik hAP ac^2 для лучшей вентеляции.
This is a remix from David's version that removes the letters, slightly speeds up printing and removes the need for supports. I tapped the holes in the side of the front to M3 and used short M3 bolts to screw the rachmounts to the switch.
This was designed for a Mikrotik CRS326-24G-2S+RM but Im pretty sure all of the 1U Mikrotik devices use the same pattern
Lochdurchmesser: 4,5 mm (für Montage)
I designed this Cover and Fan support for cooling the SFP+ RJ45 modules in my Mikrotik CRS309 (fantastic router/switch). With this, my modules seem to be running very cool: in fact when touching them I feel they are not even slightly…
Designed in SOLIDWORKS, is a support with a certain angle to place a Maschine Mikro Mk1, in order to have a better angle of vision when using it. I made two versions, version one is less worked and version two is more refined. Anyway, if…
Mounting for old adjustable antenna holder
Remixed from the original author, filled-in the large gap so that I have enough surface area to stick it to the wall instead of screwing it to the wall. Left the mounting holes intact in case I never want to screw it in the future.…
The model allows to mount a microphone at the hole of a Cajon. The holder has a mounting position for. Due to the long arms, there is a support ring, that stiffens the arms. I attached felt gliders at the claws (see pictures) to get a…
