Counting matching models…
🔫 Introducing Modern 9mm Ammunition Boxes with Magnetic Closure by Veracon Engineering! Experience the ultimate in ammunition storage with our sleek and innovative 9mm ammunition boxes. Designed for convenience and style, these boxes…
Print approx. €12.30–€15.03 excl. taxPreliminary estimate for one variant
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .38 Caliber, or .38 Special rounds in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays.…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Tiskněte v měřítku 10% K sestavení je potřeba 6ks šroubků M3x20. Víko, těsnění a klapky jsou z původního modelu kompatibilní.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This unit allows you to connect and mount your guitar pedals (with Hammond 1590 cases) within your eurorack system. The pedal case uses it's existing screws to mount to the hanger. It's tricky mounting the top screws to the eurorack…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
A se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes. Each size has an option of Outer Diameter measurement or Inner…
Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…
Remix from zx82net Great Rugged Box. The latch and hinge are not change so you can use all of his different models. Ammo box for 50x308 Printed with Verbatim RED PETG and Prusament Jet Black PETG 0,30mm 4 Layers. 2022-08-12 Uploaded a…
These are the creative commons skins for my LED track system. Please remix, and share your own custom skin patterns. See Video:
Ruggedized, latched, ammo boxes for your 9mm. Has provisions for a TPU gasket (not required) Need six M3x20 screws to assemble. Screws thread directly into the plastic. I taped the cardboard box to the inside of the lid as an cartridge…
[Update] ---2024/07/14--- Added ammonite parts. You can make your own Flexi Ammonite. This is a flexi squid, an improvement on the "Squid and Ammonite Set" that I published on Thingiverse and Printables. Flexi Squid & Ammonite Set by…
Ammo box to hold 100 223/5.56 cases. All screws are m3x30 unless you use the handle then those 2 should be m3x35, m3x40 for double handles. March 2024, added a 9mm tray as requested so you could do half and half or use the same box for…
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 9mm rounds in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one tray to…
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 200 - 22 Long Rifle rounds in a single removeable tray. The ammo tray protrudes 5mm above the top of the box base to allow for easy removal. Print Notes:…
Get ready to welcome a brand-new member of the great dragon family, the Immortal Dragon! This articulated dragon is adorned with intricate details and is also very flexible. Features: 👀 Separated Eyes version 🎨 multicolor painted Eyes…
Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…
You can also reuse the sellier & Bellot inlay.
I got a request for a ammo box for 12 GA Remington. The spacing is 48pcs/20,90x70mm between insert top and the bottom. And the total height between top and bottom is 73,35mm. I made 48pcs so that would fit the most printers. The size of…
Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…
🔫 Introducing Modern 9mm Ammunition Boxes with Magnetic Closure by Veracon Engineering! Experience the ultimate in ammunition storage with our sleek and innovative 9mm ammunition boxes. Designed for convenience and style, these boxes…
UPDATE: There is now a parametric version for all your niche ammo storage needs: I was unsatisfied with the existing options for ammo boxes, so I made these. In my opinion, most designs are inefficient, requiring more material and time…
I got a request for a ammo box for .22lr TIKKA. The spacing is 50pcs/25,4x6,14mm between the insert top and the bottom. And the total height is 28mm between top and bottom. I made the model first with M2 screws but realized that some of…
9mm Rugged Ammo Box Collection (50x, 100x, 150x, 225x, 396x) This is a remix of the Rugged Parametric Box by Whity, adapted for 9mm ammunition storage. This version integrates a removable ammo tray and includes all source files for…
I buy cheap reloads in bulk, which come loosely packaged. To transport my ammo I needed some kind of box, which is why I decided to design one. I designed this fully parametric in Fusion 360, which allows any caliber to be inputted. I…
Print with whatever material you'd like. Use 1.6mm Stainless Steel Hard Wire. This worked great: https://www.amazon.com/dp/B0C5VVVNX2?ref=ppx_yo2ov_dt_b_product_details&th=1 Box shown is printed with: Prusament Army Green PLA - Lid/Bottom…
50 count storage box. two potential lids. the recessed lid is thicker on the side to reinforce the track. the tray may be modified and published later. Print Settings Resolution: .2 Infill: 20 Notes: this was my first attempt at a pattern…
High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…
Caja para almacenar o transportar munición de 9x19mm de 50 cartuchos de capacidad. Tapa deslizante, cool y práctica. Yo lo he imprimido con 0.15mm de altura de capa y -0.1mm de compensación XY. Utilizar también el alisado en las capas que…
I got a request for a 308 Blaser ammo box of the new design. The spacing is 50pcs/12,60x75,50mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string if…
9mm ammo box. Holds 50 rounds. Printed in PLA Matte, but you can choose your material. No supports needed. If you want you can use a few drops of super glue on the insert tray to hold permanently in place. On the side of the box you will…
I got requests from different brands for my .22lr TIKKA ammo box so I'm going to do a series of those and a couple more I've been thinking about doing. Just let me know if you have a favorite i missed. The spacing is 50pcs/25,4x6,14mm…
Hi! Here comes my Hammond type boxes, sizes 125B, 1590A, 1590B, and 1590BB. Perfect for DIY effect pedals. The files are available in STL and STEP formats. Personally I use wood screws diameter 3 to close the boxes. I print in PLA, with…
This model represent a living ammonite. It's a remix of: https://www.thingiverse.com/thing:3785257 https://www.thingiverse.com/thing:1611970 I really like the articulated model of lexlang, but I wanted to make some changes: a new shell…
Here are some 22LR storage boxes and trays. These are designed to be able to arrange large amounts of bulk 22LR ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 15 trays can be stored in…
This is a 2 piece printable ammo box to store 308 rounds. I reload my own rounds and found these 3d printed versions to be just as sturdy as the store-bought versions, but way cheaper. The box holds 50 rounds. Use an 18-gauge brad nail…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I got a request for a 30-06 Ammo box and there are more people asking for it and also someone who thought the previous lid was too tight for their ammo. The reason was that I made it tight for the Norma ammo my friend used so it wouldn't…
An ammonite model that can serve as a nice desk decoration. This print uses a free model of an ammonite and a rock. Print does not require supports. Enjoy! If you like this, please check out my other fossil models: Dragon skull…
Deutsch: Ein kleine kleine Verbesserung für den Luba, um ihn 4, 5 oder 6 Messer pro Seite zu ermöglichen. Was brauchst du: (8x/10x/12x) Ruthex M4x8.1 Gewindeeinsätze Tipp: Zudem empfähle ich Klingen zu verwenden die Hinten angeeckt sind.…
Print on it's base with tree supports for the ears and top antenna piece. The grooves shouldn't need support, mine didn't. Otherwise, pretty happy with the result. In future, I might add a separate model stl for the top antenna as mine…
Hose adapters with a 90deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
Check Out my improved Design - Slim Ammo Box 9mm 50 Rounds V2.0- ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 I did not found a slim Ammo-Box for 9x19 which i liked…
I got a request for a 9mm ammo box. The spacing is 35pcs/9,40x30,70mm between the insert top and bottom. I made 2 lids, 1 with logo and 1 clean. I am using 1,6mm stainless steel Tig-welding pin for the hinge and latch. I made the latch…
I have changed to fit elite darts and have a more secure lid and hinge. I would recommend printing with 0.2 mm layers.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Perfect decoration. 350mm hight
I designed these ammo holders to hold 400 rounds of either .223, 5.56, or 300 AAC Blackout ammo. These fit into the MTM .30Cal Ammo Can for storage. Print instructions Photos are original design, I recessed the dividers down a bit to save…
Works with caliber 308w, 30.06 and 30-30(confirmed by the printed cow@theprintedcow_527926 ) I needed a good ammo clip that I can easily carry with my during my driven hunts so that I have enough bullets, but still doesn't make any…
Huge thanks to Bluewar for the original design. Stackable ammo box for 9 mm Luger ammunition. Assembly is the exact same as Bluewar's design, along with the retained ability to link boxes together + pair with his carrying handle! Let me…
This is a 22lr ammo box with a sliding lid with a detent. I designed it to take CCI style 50 round trays, because I don't really like the cardboard their standard rounds come in. I printed it with 3 walls and 20% infill and it works fine…
Hose adapters with a 90deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
22/05/2023 - Update Have now printed the .222 100 round box, it works well however its a little tight, the rounds fit but i may either reprint with slightly larger holes or just run a round sanding bit through them 07/05/2023 - Update…
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .45 ACP Cartridges in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one…
Ammo case that can hold 50 9mm rounds.
Mudguards for the front wheels to prevent soiling from whirled up grass cuttings. The parts are only placed on the wheel suspension dome and should be held in place by themselves. The mudguards are curved upwards on the outside to ensure…
A farmer, bar keep, bar maid, and half orc barkeep with a kitty! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page…
9mm ammo box for 50 or 60 rounds. 60 rounds version has 6 rounds on each row. Added .38spl version that is scaled 1,3.
Attaches onto the side rails of the ragefire, holds the original belt or various delinking belts available on the internet, attaches without hardware
Perfect for adding a touch of sophistication to any home or office, this ammonite sculpture serves as a striking centerpiece. Its neutral tones blend seamlessly with any modern decor style. It can be placed in a modern base ensuring…
I got a request for a Kalashnikov ammo box. The spacing is 50pcs/11,80x57,215mm between the insert top and bottom. You gonna need 8pcs/M3x20mm for the Latch and Hinge. Hope you like it.
Time to Gridfinitize your pocket change. I arranged the stacks in size (diameter) order which is sure to soothe the OSD in some of you, as opposed to denomination order, which is sure to trigger the OSD in some of you 🫠 The step file is…
This is a 00 scale (1:76) shell designed to fit the current (2019-present) Hornby or Dapol Terrier Loco chassis with minimal modifications. It is based off of a LB&SCR “E2” however it is obviously shortened and stylized to be a semi…
The weak hinge is now fixed uploaded 28 February see picture. I got a request for a .308 ammo box. The spacing is 20pcs/12,6x75,24mm between the insert top and bottom. I made 3 different versions/logo. Let me know if you want another…
Just a standard 12 gauge shotgun shell ammo box that holds 24 shells. Update: Modified the ammo box file slightly for the lettering which is why it says v2 on the file.
Update : Version 1, printed in PETG, broke when it sagged and the Luba backed into it. Version 2 is easier to print since most pieces lie flat, but the number of parts went up to 8. It's also slightly larger than v1 so cover the Luba a…
something me and my friend wanted to print
This is a remix of the Rugged Box Parametric by Whitey. This box is designed to hold 100 .40 Caliber rounds in two removeable trays. The center rib on the box base corresponds to the slots on the bottom of the ammo trays. This allows one…
Prop 20mm aircraft ammunition with printed ‘brass’ shell and projectile. Very closely matches old Air Force M56 20mm ammunition. This is a two-part model with a shell and projectile. Projectile models include 3 or 4 color changes…
Mudguards for the rear wheels to prevent soiling from whirled up grass cuttings. The mount is placed over the axle and secured at the bottom with a screw. The mudguard is pushed over the dovetail onto the mount. I've printed them with 0.2…
Holder for two 12 cal shotgun shells on the belt for a quick reload. Print upside down to have a flat surface to print on. The small bridge on the belt loop wont need any supports.
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
This case with a sliding lid will hold 20 rounds of 30-06 ammo. Each round sits in the case snuggly and doesn't move around.
CLICK HERE If you're looking for 12ga storage trays for a standard M2A1 .50 cal ammo can! CLICK HERE If you're looking for 12ga storage trays for a Cabela's Dry-Storage Ammo Box! Some manufacturers sell their shells in boxes that are so…
-no supports -0.4 nozzle -0.2 layer hight -100% infill -195grams of fillament -8 hours of print time (at 100-150mms) you will need six m3x30 screws put tape on the bottom and some thin foam (i used the foam that my printer came packaged…
Currently supported calibers: .22LR 9mm Luger .45 ACP .380 ACP 5.56 NATO 7.62x39mm .308 Win 12ga 2.75" This list will expand over time - leave a comment and I’ll be sure to include all requests in the next build. --- What in tarnation is…
This tray will hold 100 rounds of 9mm munitions, and fits nicely inside of the plastic ammo boxes you can get from Harbor Freight (item 61451) and other similar stores. This will not fit the metal NATO style ammo cans as it is wider…
Remix from zx82net Great Rugged Box. The latch and hinge are not change so you can use all of his different models. Ammo box for 50pcs x 9,3x62 Printed with Extrudr MF Military Green PETG and Prusament Jet Black PETG 0,30mm 4 Layers. Hope…
Nerf Dart Ammo Box for many many Darts
I got a request for a 30-06 ammobox of the new model i make. The spacing is 20pcs/86,50x12,60mm. I made a o-ring to fit the lid but it's made for 2mm o-ring string if you prefer that. The hinge and latchsystem is made with 2mm tig-welding…
Hose adapters with a 45deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
I got a request for 6,5 Creedmoor ammo box. The spacing is 20pcs/75,24x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I made a little headroom but let me know if you have another 6.5 creedmoor that…
Slim Ammo-Box for .223 / 5.56 ---.308 / 7.62 Box now also available! --- https://www.printables.com/model/1338689-308-slim-ammobox-50rds-762x51 Update: Slot for label infront of box engraved “.223 Rem” infront of Box Locking mechanism…
Instructions Printing: I suggest using PETG or a little bit more malleable PLA filament for the green parts. Otherwise the leaves will require heating for the bending. If you use gcode files, skip to point 2. If you use stl files, please…
This will act as a repository for the parts that are common to my Modular Ammo Boxes. Updated parts will be added here before they are moved to the individual box files, so look here for the latest files. The ammo boxes are now in the…
This is a case for the awesome Commodore 1581 floppy disk drive replica project presented by toms01 on Forum 64 . The case closely resembles the original with some practical changes to make it more 3D-printable and to accommodate 'modern'…
This set allows you to make two types of flexi: common Squid and Ammonite. Print in Place with no supports. Easy to assemble by simply fitting the nut and bolt parts. Please take pictures of your Flexi and share them with us! Print…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad These are inserts (and corresponding lid badges) to build a 100 round weatherproof ammo case out of Harbor Freight's…
Commodus Stela (W946) The Commodus Stela (W946) is a fascinating artifact from ancient Egypt. Let’s delve into its details: Description : The Commodus Stela is also known as the Sacred Cow Stela . It commemorates the mother of the Buchis…
Custom magazine extension for magazine GL9 magpul Glock 17 + 2 extra ammo. The product is made in such a way that no screws need to be used.
Mammoth-3D CPAP Muffler: Reducing Noise by 13 dB with 100% Airflow for 3D Printing Part Cooling The Mammoth-3D CPAP Muffler is specifically designed to reduce the noise generated by the cooling fan ( 24V Brushless Centrifugal Air Blower…
Resized for common affordable exacto knifes found in Europe, anywhere from hardware stores to Aldi.
A minimalist travel backgammon board that stores its checkers in dedicated are in a closed pack. The design uses 4 colors, but can be downgraded to two colors only. For the board filament (white in my example) suggest to use non…
Stylish box to contain two trays of 9mm Luger rounds. Take 2 plastic matrices from an original factory ammo (Sellier and Bellot) and place them into the box. This will ensure there is no rattling when carrying the box around as the rounds…
8 shotgun shells (Extra Ammo) to your Molle vest or plate carrier. Printed on a P1P using Esun Olive PLA+ 0.16 Optimal Profile Layer Height - 0.16 First Layer - 0.2 Walls - 2 15% Infill 220 C Nozzle 55 C Bed
FDM-Compatible Remix of the Laser-Cut Version by jtronics 19 Pieces 20 x 20 cm Kit Card version suitable for gifting Non-Kit Card version for personal printing and easy scaling A straightforward color swap is possible after half of the…
22 LR ammo box For the axes, i use 2mm soldering rod. You can use nails…. Boite pour munitions 22 lr. Pour les axes, j'utilise des baguettes de soudure de 2mm, vous pouvez utiliser des clous…
IMPORTANT UPDATE * I've replaced all versions today (16 Jun 2018)* with V2 that has a taper, read more below** Introduktion This is a simple holder for 5 cartridges with a diameter of 12mm so it should fit most of the common ones for…
Source: https://www.thingiverse.com/thing:1583209
"Special" ammunition box holds 15x 12/76. Hardware : 6 x M3 12mm Print setings: Lager:0.2 Infil 15% Material petg . If you like my project you can buy me a coffee. Thanks https://buycoffee.to/dabal
This fits into any 50 Cal ammo can. holds 50 shells per tray and can fit two trays stacked in standard ammo can.
