Counting matching models…
This is a remix from DavVvEs design from here: https://www.thingiverse.com/thing:3950437 My changes: - cut in 2 halfs to make it printable without to much supports - added “thick axes” so the spoke rims will hold the 3mf & gcode contains…
After watching my nephew attempt to build his own race track for his hot wheel monster truck at the beach, I decided to help him out with a few designs to make his own track. 180 Bank Ramp/Jump Rumble Bumps Haven't been able to test on…
Material: PLA Printing speed 100mm/s Nozzle temp 215 Bed temp 60 Support No Plate adhesion No 15% filling
3D scan file of motocross helmet scaled to 1/10 of the original. There are some faults in the file, especially in the bottom edge and under the sun visor, but it is still perfectly usable for RC-buggy driver etc.
<BRB> Motocross | Motorcycle - Keychain
Motocross helmet found on Thingiverse, uploaded here for make points.
I needed a better break line guide for my KTM 690 Rally Fairing Kit. But it should fit every normal enduro / motocross fork. Design to print in TPU.
Motocross Avec Lève Moto (peint à la main)
motocross in the mountains Explore our hexagonal frame, ideal for hanging on a wall or standing on a piece of furniture with its stand. This decoration depicts a person practicing motocross in the mountains. The frame is printed with the…
Gopro Motocross Thor helmet mount
Voici une création de décorations, possibilité de changer les couleurs en fonction de votre "MMU2S"
This is a simple mount for the phone holder for the MotoCaddy, slide it in and use a RAM mount or similar to hold the phone. This is just the mount, not the other arms and phone holder peaces. NOTE: Apparently not a snug fit on the 2022…
Print with PLA or PETG Use small layer height for better quality
Nozzle: 0,4 Supports: NO PLA, PETG
Introducing the Kayo Motocross Keychain, a perfect accessory for motocross enthusiasts and 3D printing fans alike! This detailed keychain captures the essence of the Kayo motocross bike, showcasing its sleek design and intricate features.…
The files are as follows: 2mm extruded “HONDA” text suitable for 3D printing if you want embossed text on the sides of the Motocompacto SVG file of “HONDA” text if you have a vinyl cutter. Ensure the “H” is 17.8mm tall and the rest of the…
nastavení výměny barev při výšce vrstvy 0.2mm do 1mm bílá barva od 1.2mm do 1.6mm modrá barva 1.8mm černá
This is a remix of andlod awesome "Bicycle Water Bottle Holder" ( https://www.thingiverse.com/thing:4337265 ). I thought i would take a stab at creating my own mount for the Motocaddy electric trolly for a bottle, so far it works great!…
Motocross Bike Toy Stand Holder with fixing key hole. …. no supports needed
Print settings You can scale it as big as you want Layer height 0.2 mm Gyroid fill pattern 15% fill density PLA 1cm thick
there is one with my number and one plane one.
A new 3D figurine generated by AI, a Chibi Motocross. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
This is an adapter for up to a 1 ½" bar for a Harley Davidson-style cup holder. The adapter uses M4 bolts and nuts; the bolt must be at least 28mm long and longer if the clamp does not close. *If the bar is too small, use some rubber as a…
"CrossPot" - the Motocross (Helmet) Planter for your window sill! A must-have for every motocross fan! The planter is available in various versions : with holes without holes A self-watering version is planned! So stay tuned! The hole…
Zdravim, prinášam vám držiak na GoPro kameru.Ked že som vlastníkom motocykla a i motokrosovej helmy,tak som vyhladaval držiak na kameru na stránkach ako je Thingiverse alebo Yeggi... A nič som nenašiel.Tak som sa pustil do toho(je to prvá…
decorative wall ornaments dekoratif duvar süs eşyası
Does your child or parent love motocross ?! Here's the cake topper you need !
I used PLA-CF with 50% infill. Laid on it's back with Tree supports.
Here is a replacement part for the clip of a MotoCaddy S7 remote control. I printed it on the side, with 4 perimeters, 0.15 heigh and organic support for the pins. I included the Fusion360 file so you can easily make remix if needed.
My son's motocross toy lost one of its handlebars, so I figured it would be a nice exercise for me to try and recreate it from scratch. This is the toy in question: https://playmobil.fandom.com/wiki/9357_Motocross_Driver The measurements…
The Suzuki GS500 3D model is a detailed miniature recreation of the iconic street motorcycle. Supports needed - auto Removing supports - extra careful.
Un llavero de llanta de motocicleta. Impreso en PLA Negro y Gris. Sin soportes Altura de capa 0.2
Got a Honda Motocompacto. Didn't like that there are NO FREE MODELS to upgrade this plastic toy scooter! Here are some press-fit headlight shrouds for the Motocompacto headlamp assembly. Will require some sanding of sharp edges to force…
a friend asked me to make this, thought i would share it
Title Motocross Helmet Wall Art – Dirt Bike Rider Decor | 3D Printed Wall Art Summary Motocross helmet wall art with a dirt bike rider scene – perfect for garages, man caves and off-road fans. 🏍 Tags motocross dirtbike dirtbiker mx enduro…
Motorcycle fog light holder for 26mm. Clamp size is M4 nut. Fog light mortice is M6.
Transport Schutz Motocross kommt vorne an die Gabel um die cross maschine....um die nicht ganz runter zu spannen.
Another item added to the list of free stuff that you can 3D print for your scootcase. Print with the visible part against the bed. EZPZ. I know I said “press fit” but if you really want this secured in place, a bit of double-stick tape…
Dummy 13 Armor Head may need to be scaled down slightly to fit inside helmet.
Un llavero con temática de casco de motocicleta Podes apoyarme invitandome un café a través de mi alias emmauku.uala
Honda City + Motocompo, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Footpeg Adapter, because the original springs are smaller in height. Fits with DRC Footpegs for Yamaha YZ/WR ... on my Tenere 700 with original spring and bolt. Printed with Polypropylen Carbonfiber.
A simple motorcycle kickstand plate for use in grass or hot pavement. Printed using PETg for high temps. This model has water drain holes and a loop for a string if you have issues bending over to pick up the plate once the bike is up.…
Diseño e inspiración Este modelo se inspira en personajes espaciales de ficción, destacándose por su casco distintivo y apariencia futurista. Uso Ideal para coleccionistas y entusiastas de temas espaciales. Puede fungir como adorno o…
Motocross, mountain bike Track Marker Recommended printing in brightly colored TPU/ PLA/PETG to be well seen on your motocross or special enduro track In the event of an impact, the blade bends and returns to its initial shape. In the…
Motocross Gabel Halterung dass man nicht so viel abspannen muss.
Remove support Add/glue rubber (in black below) to prevent the parts from sliding (rotation) on the metal support Tighten with M4 six hex screw and nut
A detailed motocross dirtbike rider silhouette positioned after the name Tom. Perfect for MX riders and off-road
Verschluß für eine 330ml oder 500ml Dose mit Motocross Spruch
Its a GoPro or other similar camera mount for Enduro / Motocross helmets, but can be adaptated to work with other helmets with the classic «Cap» of the Motocross Helmets. Print with 100% infill with PETG;
A cause d'un effort trop important, l'accouplement d'origine avait cassé. Recréé à partir de la pièce d'origine. Imprimé en Prusament PC-CF
Fußraste für Motocross YAMAHA PW 50
All of the cup holders and accessories I've seen have been mounted inside the main compartment of the Motocompacto. This causes issues when converting the scooter into a suitcase for carrying. This shaft collar based accessory mount…
This is a adapter to the umbrella mount, where i placed a mount around the plastic screw to fit. You then slide your cabin hook thought the underside and it will hang handy while driving your cart. Print Settings Printer Brand: Creality…
This is a mount for a Garage Door Opener that fits on the handlebars. Multiple sizes to address different bikes. Garage Door Opener: Garage Door Opener Remote with Keychain, Replacement for LiftMaster/Chamberlain/Craftsman Garage Door…
For M10 hex screx.
Simple GoPro mount to stick to the front of your motocross helmet for true pov.
Zero motorcycles key fob I designed in CAD.
My use case was mounting phone to the Mazda Miata dashboard using a RAM-style motorcycle phone cradle. I've replaced the RAM-style ball with the 17mm tightening ring to make it more compact. (in my case both used the same ¼ inch camera…
Side fasteners for fastening BMW GS Motocross Helmet (one world) visor. And an additional slightly longer version.
quick model I made for my Kenny Titanium Graphic helmet.17mm total length 12mm thread length 6mm thread diameter 18mm outer diameter--- Modelo rápido que he hecho para mi casco Kenny Titanium Graphic. 17mm total de largo 12mm rosca de…
Я смоделировала крышку (она защелкивается на держателе). Я приспособил держатель для установки на мотоцикл в штатные места пластиковых защитных креплений и использовал 2 стандартных болта. Настройки печати Марка принтера : Летающий…
klicenka napis-motocross teplota 215 60
Dosenverschluß für 250 ml mit Motocross
I didn't like the handlebar grips, SO I MADE MY OWN! One with little motos, one with the Honda “wing” logo that looked like it would give some good grip. These are a little more difficult to print than the other Motocompacto stuff I've…
Krytka šroubu s logem Suzuki. Je potřeba tisknout s podpěrou.
I have designed a box both for my safety and motocross goggles. The design is parametric, in Autodesk Fusion. I have included STL files for my goggles, and also a small print to check the fit for your goggles. My safety glasses are Medop…
Recommended Material: PLA (for sharp details and vibrant colors) or PETG (for stronger, more flexible snap-fit joints). Layer Height: 0.2 mm or 0.16 mm for smoother curves on the bodywork. Infill: 15% - 20% (Gyroid or Grid). Supports:…
tisknout z Flex
Logo bývalých legendárních motorek v ČSSR Logo of former legendary motorbikes in the Czechoslovakia
drziak na miniUSB kabel na motocykel
Model compatible with Robot No.1, it only needs the handlebars to be assembled, the rest is printed as is with few supports, I hope you like it and I am open to suggestions and modifications.
Extreme Lightbox. The front is made of PLA, the back is made of PETG. I recommend gluing a Neutral LED strip along the edge inside the frame. I printed with a layer height of 0.2mm and an infill of 15%. Active material interlocking is…
Stopka do podtrzymania motocykla aby nóżka nie zapadała się w ziemi.
When mounting lights on my enduro helmet, the standars plastic screws is a bit short and tend to loose their thread. This project is an attempt to print sligthly longer screws. I tried printing the screw standing on it's head, but that…
Questo progetto l'ho pensato e realizzato, su Fusion360 per uso non commerciale, per sostituire i manici con diametro di 30 mm, della mia carriola. Stampato in TPU con filamento 95a della Elegoo e con una trama a rombi,consente una presa…
Design Type: Captive Hex Bolt Knob (Nut/Bolt insert) Hardware Required: Standard M12 metal hex head bolt. Assembly: Designed with a precise hexagonal pocket to fit a standard M12 metal bolt. Simply press-fit the metal screw into the…
This is a simple cap / cover to protect the battery connection on the trolly from getting wet or dirty, just snap it on and spash away (works for me at least :) and please no high pressure washing.
Soo, I saw something shiny on the Internet. A Honda Motocompo, that a guy had imported from Japan. After drooling for a while, I noticed the magnificent logotype. And proceeded to drool some more. OK, I'll probably never own a Motocompo.…
first edition, Moving wheels will be added later
Mocowanie halogenów motocyklowych rozmiar 50 mm
A simple yet highly functional protective cap for the battery connector on older Motocaddy electric golf trolleys (models before the current Click 'n' Connect system, such as older S1, S3, M1 Pro, etc.). When you transport your trolley in…
Made to fit raven MX goggles. They are meant to be glued on, but I might make a clip-on model later
se debe añadir agujero para tornillo o sporte a conveniencia
Das Motorrad mit Spanngurten befestigen ohne das es einfedert und instabil wird.
This snap-in mount for the UBOX Aluminum Lite allows you to securely install the VESC controller into your Motocompacto. A slot is also cut out for the Spintend Bluetooth module that you can get with the controller, which will friction…
Uchwyt włącznika świateł do motocykla
Dniepr motocycle keychain 69 mm height
A cause d'un effort trop important, l'accouplement d'origine avait cassé. Recréé à partir de la pièce d'origine. Imprimé en Prusament PC-CF
