397 models
Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate. Examples printed at 0.2 mm layer height with 3…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
I liked @Nebbish's DCC-EX case, but it didn't fit my hardware, since I'm using the EX-Motorshield8874, not the Arduino Motorshield. This adjusts the side ports to fit the 8874. I also found the fit of the microcontroller a bit too loose…
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for one variant
Do not guess the direction of your stepper motor any longer while developing code - just use a clockhand-style pointer. These parts are press-fit for NEMA17 axis, just print it with an as-fine-as-possible setting (I used 0.1mm Layers in…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Different sizes of gears for dc and brushless change sizes and enjoy it for hobby makes etc. Please give a like thank you :)
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
A simple little plaque I made for my car. Attach to your car with magnets or VHB Tape. The Project 3MF Posted has a filament change baked in, and is scaled to fit standard U.S. License Plate. The STEP File is not scaled to fit anything…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Introducing the FDM (Fixum Dude Motors) print in place Jeep. Based off of the K2_Kevin birthday model ( https://www.printables.com/model/516455-k2_kevin-birthday-model-2023 ). Find the entire FDM Collection of vehicles here:…
I've added a “New Angle” file for people having issues with the overhang in the underside of the bed on the top. Introducing the FDM (Fixum Dude Motors) print in place dump truck. The wheels rotate right off the build plate. There is a…
Introducing the FDM (Fixum Dude Motors) print in place police car. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Introducing the FDM (Fixum Dude Motors) print in place garbage truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate. V2 has newer stronger axles. Find the entire FDM Vehicle Collection here:…
Criminals, by nature, are a cowardly and superstitious lot. Drive them to justice with the FDM (Fixum Dude Motors) print in place Batmobile. Find the entire FDM Collection of vehicles here:…
Introducing the FDM (Fixum Dude Motors) print in place pickup truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
*****Note: Please read the complete instructions before printing this file. Most likely you will have to print this model at about 100% to 108% scale – so, if you don't measure your printer's dimensions before you print, chances are that…
Introducing the FDM (Fixum Dude Motors) print in place school bus. Version with or without the print-in-place stop sign available. Non-Stop Sign version recommended for very small children. Find the entire FDM Collection of vehicles here:…
Introducing the FDM (Fixum Dude Motors) print in place ambulance. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Introducing the FDM (Fixum Dude Motors) print in place fire engine. The wheels rotate right off the build plate so you can respond to any emergency right away. Find the entire FDM Vehicle Collection here:…
NOTE: Models have been updated based on feedback. New models (V3) should have less side to side movement on the wheels and on the bed and slightly more range on the tilt of the bed. Also fixed a small issue with the front windshield…
Introducing the FDM (Fixum Dude Motors) print in place ice cream truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from…
Introducing the FDM (Fixum Dude Motors) print in place VW Bus. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315 Prints without supports. Samples are printed in PLA with 0.2 layer…
Introducing the FDM (Fixum Dude Motors) print in place racecar. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Yet another electric powered "turbo"... but this one sucks really hard! [>1.0 psi easily] I set about designing a centrifugal compressor with a smaller rotor/shroud clearance that commonly found, in order to achieve high pressures more…
Introducing the FDM (Fixum Dude Motors) print in place snowplow. The wheels rotate right off the build plate so you can clear the streets right away. Find the entire FDM Vehicle Collection here:…
Introducing the FDM (Fixum Dude Motors) print in place taxi cab. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all new from the…
Introducing the hardtop version of the classic FDM (Fixum Dude Motors) print in place Jeep. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315 Prints without supports. Sample printed…
Introducing the FDM (Fixum Dude Motors) print in place package delivery truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all…
Includes STL and Bambu 3MF file.
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
I took the FPV-Rover V2.0 and made some adjustmants to fit my hardware and my liking. Things I have changed: -inner_frame_left and inner_frame_right: I deleted the venting openings. These pieces are now much sturdier. -motor mount:…
Introducing the FDM (Fixum Dude Motors) print in place Jeep Gladiator. Based off of the 2 Door Jeep Gladiator Concept Vehicle. Find the entire FDM Collection of vehicles here: https://www.printables.com/@fixumdude/collections/696315…
A turn table for 3D scanning. No motors and no bearings are required. I used PETG. You can print all parts with standard settings, and you don't need to put support. Assembly Insert the bar into the base. The longer hexagonal rod is for…
Presenting the classic mail truck, inspired by a mod to my package delivery truck by MillCasaMakes on MakerWorld. New 4 color MMU version added for better quality of the logo and stripes. Four color Painted/MMU Bambu Studio Project added…
Modeled in Siemens NX. Printed the Planet and Sun Gears out of Nylon with 0.25 Nozzle at 0.07mm layer height and 100% infill, the Carrier out of Nylon with 0.4 Nozzle and 0.1mm layer height and 100% infill, the rest out of PLA with 0.4…
Introducing the Vaessen Motorsports VP-2, these are a long term project following on from the VP-1 pedal set I released. I liked that set, however it involved a lot of machining work which is not feasible for most DIY makers. I set out to…
Introducing the hardtop version of the FDM (Fixum Dude Motors) print in place Jeep Gladiator. Based off of the 2 Door Jeep Gladiator Concept Vehicle. For people who wanted the Gladiator, but also wanted a stronger model without the roll…
Husqvarna/Stihl Heckenscheere/Motorsäge Wandhalterung.
Indestructible, light, flexible frame with camera and JST-connector mount. There is a hole on the floor to feed the receiver antenna through it. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter…
These are wheels created for N20 motors, 3mm D shaft For tread, I used O-rings, 55mm was the best fit. This was used in a 3-D Printed Antweight bot.
Video on Youtube: https://youtu.be/mgOHi9M1HmE Code to control the boat with two esp8266: https://github.com/lusengineering/Benchy-tugboat Parts List: (Not affiliate links because i dont know how tu use them) Motor: Racerstar 2207 (1600KV…
FPV Motor Pliers Comment the motors you have and I'll see which one pops up often and make it. Looking for the most common sizes for 7" or larger Features: Sizes available now: 3"-4" (14xx-16xx motors), 5" (22xx-23xx motors) High…
Walking Roboter
Updates 29-09-2024: Uploaded a 5-piece split model (inform me if it doesn't fit your printer) 26-09-2024: Uploaded the complete file of the front fender. (.step and .stl available) 01-05-2025: After some trial and error, we found out that…
Creality K1 XY Stepper Motors CAD Model : Nema 17 42-60mm 5-40mm shaft GT2 36 teeth pulley Left (X) BJ42D41-14V06 - Right (Y) BJ42D41-14V07 This model is meant to be used as an asset in CAD software, not to be 3d printed. My ultimate goal…
I've remixed the Inverted Electronics & Voron Trident Lowered Z motor mounts so I can install Nema17 motor with coupler and 350 mm leadscrew as I didn't found any with an integrated leadscrew at this length for my self-sourced 300 cube…
Modular Rocket system This project was inspired by the design by Landru however it is completely reworked and extended. There are now many more components. I will publish add-on components as they are tested however this Thing includes…
This is an easy and fast mod to Synchronize the Z-Axis motors of the Tronxy X5SA-400. I've not tested this but this mod should also be compatible with the standard X5SA with 300x300 bed, you'll need a shorter belt. This mod is not…
What do you do when you need wheels, but ordering them will take too long? you print 'em yourself - I had a look around, and the ones I could find had too large d-holes, so I decided to make my own. Print the actual wheel in some stiff…
This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!
fischertechnik Gear Z20 for ZGB25RP and JGA25-370 DC motors with 4mm D-Axle Category: Robotics
This swerve drive is essentially a powered castor that can be used to make omnidirectional robots. Unlike Mechanum wheels or omni wheels, it doesn't suffer from the problem of tiny roller diameters, and hence, is great for navigating…
Radial Fan with casing for small DC motors (6-12V). The motor is fixed by 2 Screws and 2 nuts. Didn't test this one yet, but the previous design worked really well. Using it to replace cooling in my cool box. Textured it for strength and…
This drone really prints and really flys with real store-bought parts!!! Needs: 4x 615 motors. 2x counter-clockwise and 2x clockwise. 1x AIO 1s Flight Controller. (I would like to put a BetaFPV F4 in this drone but I only have a BeeCore…
Stepper Motori. Serie 17HS2408 - 17HS3401 - 17HS4401 - 17HS8401 - 17HS6401. Creati con solidworks con passaggio semplificato*. per le misure complete consultare il file in allegato Step motor_datasheet.jepg Sono inclusi file solidworks…
Man braucht zusätzlich: Klebstoff (zB Sekundenkleber / Cyanacrylat) 2 Magnete Ø5mm x 10mm (oder kleiner) Zwei Seiten werden einzeln gedruckt und gegeneinander mit Kleber zusammengeklebt. Dabei oder anschließend werden die Magnete…
Remixed from ‘Ender 3 Pro - PSU Offset Mount (dual z-axis)’ by emtrax to work with the stock Ender 3 PSU by Cheng Liang This remix retools emtrax’s super slick, ultra functional Meanwell PSU mount to work with the stock Ender 3 power…
They're FINALLY Here! Official replacement wheels designed to be easy to install without glue, stand up to normal play, and most important of all, pass the @Crussty Crush Test! Designed to fix broken wheels on FDM vehicle without having…
Dust Protector for Prusa I3 MKE Z-Motors. -Single part for left/right with option for the mating plane (V1 is the same as the original) -Tighter fit around the spline screw and the guide rod: 8.8mm for the spline screw / 9.0mm or the…
With 2 M3*4 and 2 M3*25 screws you can add close loop control to your nema motor. This model is made to respect the profile of the motor and add only 6mm behind it. Simply add a magnet to the shaft and screw this. That's it. There is…
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
If you are using a different type of bearing, you can change the bearings' dimensions in the FreeCAD file's dimensions spreadsheet, as well as other dimensions of the model. Warning : changing the hex size won't update the holes in the…
My son loves these wonderful trucks and cars, but he broke some wheels To avoid printing the whole model Replacement wheels for these models : https://www.printables.com/@fixumdude/collections/696315…
updated version changes: -servos changed to GDW DS 041MG -arms beefed up -motor plate has tab for zipting motor wires to. -m2 hardware for fastening nacelles halves together. Needed: m2 screw kit from amazon 2x 4x10x4 flanged bearing 2x…
Step 1: View Photos Step 2: Download stl files Step 3: Print them all Step 4: Get electronics Step 5: Assemble them together Step 6: Fly or Crash !
Quad props for Hubsan Mini drones: Hubsan 107 L Hubsan 107 D Hubsan 107 C Category: 3D Printing
Simple and durable frame for 8520 brushed motors. In replacement of the original LDARC Tiny R7. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 0.16 Category: Hobby
First used the 28mm width which was not full width, it shifted to the side. Probably better to use the full width 35mm, and glue with something that will stick well to PETG.
Rotated the outlet about 15° to clear the sixth mounting position for putting in screw from top. Also embedded M3 nuts into the lower (no support needed). Mounting with M3x12mm or longer. I uploaded a print file for Mk4S with three…
Tachibana Motors & original Kamen Rider logo If you are interested in more tokusatsu themed 3d print files like Henshin belts, check out my etsy, patreon and website! Feel free to message me with model suggestions here or over on my…
I made this in anticipation of the arrival of my Ender 3 Pro. Remixed from the two linked files. I added the VWORP around the base. What good is a TARDIS if it doesn't VWORP? 13-11-19: Added photos to show clearance for spool. Better yet,…
When I built a small self-driving Robot, I came across a Problem where I had to measure a Distance to the next Obstacle for multiple Directions. I didn't wanted to use mutiple sensors because the wire would've been more complex than it…
Remix of great motor cover - i made it thinner and without a cable compartment.
Attention: A Variant of This Model Is Now Available With A Belt Tensioner. Y-Axis Motor Relocation Bracket for large NEMA-17 motors on the Ender 3 v1 Modeled to accommodate the vertically oriented 2040 extrusion and v-roller movement of a…
Use low kv motor for best performance and higher voltage output.
Those are 68mm by ~6mm wheels for 3mm D-shafts, for example N10/N20/N30 motors. They use ~55mm (outer diameter) big silicone hairbands (~2.9mm thickness), which can be found everywhere on amazon, ebay, aliexpress (about 6$ for a pack of…
Y-Axis Motor Relocation Bracket & Tensioner for large NEMA-17 motors on the Ender 3 v1 Modeled to accommodate the vertically oriented 2040 extrusion and v-roller movement of a stock, original Ender 3. This part is designed to accomplish…
I abandoned this model some time ago but I am leaving it here, if you want to continue. Fully enclosed 120mm FPV frame for brushed quadcopter. Designed for specific hardware, that will be used in my quad. Battery is mounted from bottom…
Motorsport keyrings Please message any request you would like added. All these designs are correct font/spacing, as you would find from the genuine manufacturer. The keyrings are 50 x 15 x 3mm (Not including ring loop) Ironing is…
This is a compact gearbox for NEMA 17 stepper motors. It is intended to be used for extruders, but can be used in many other applications as well. The gears are mostly enclosed in the housing. This gearbox does NOT change the direction of…
This insert uses 5x3mm magnets to attach to the back of a stepper motor. You will need : 25mm M3 bolts for a 40x20mm fan OR 15mm M3 bolts for a 40x10mm fan Magnets are press-fit - use a pliers Print Settings Printer: Tevo Tarantula Rafts:…
A copy of the ever present 34mm x 7mm wheels you can find all over amazon, ebay, aliexpress, etc. but with double the tires ;) The rubber tires themselfs are from those 34mm x 7mm wheels. Should fit the 3mm D-shaft of any N10/N20/N30…
i saw this adapter an thought i could create a box above and put a fuse and switch in it so i can control 24V DC motors without a power outlet nearby Needed components: Hella 8KW 054 944-003 connector :…
This is a disc brake adapter I used on the electric car I build for my kids. You can read more about this project here: https://www.martinsentech.no/index.php/2023/10/12/electric-pedal-car-for-kids/
This is a set of three model rocket display stands. The 18mm & 24mm are desktop stands that will display the model in a vertical orientation. The Y stand is for horizontal display or to use while working on the model. All of these stands…
A quick 3D mock-up of Adafruit's Skinny Wheel for TT DC Gearbox Motors. Just in case you would like to print one for your purposes or make any changes to the hub that you may need. I printed the hub from ABS and the tire from TPU.…
I print alot of ASA and it gets very hot inside the enclosure, i wanted to improve the heat dissipation on the stepper motors. These mounts/clips i design allow you to fix a simple 40*40*11mm heatsink below the stepper motors. They work…
Solder Spacer for all Sand-Shark Labs and probably almost all blasters that feature 130 size motors. If you plan on doing your own soldering, use these to ensure you don't accidentally make a dangerous circuit.
Keychain Print the Keychain.stl file at the original size. M Print the M.stl file at the original size. Line You need to print the Line.stl file 3 times (light blue, dark blue, red). For better completion, print the Line.stl file at 98%…
fischertechnik Gear 10 for ZGB25RP and JGA25-370 motors Category: Robotics
Helps correct the slight tilt to the z-axis motors from the frame. This issue is from the facotry and occurs on most models.
Partlist: Befor printig all parts for a large gearbox try one stage and test for tight tollerances! Partlist for the first stage and single stage versions: 1x Packer 1x Sun_1 1x Ring 3x Planet_bearing 1x nema_adapter_45deg_stack 1x…
Pulley, Gears and electricity! Teach your students about simple machines and motors! Explore the magic of movement, power, and mechanics with an introduction to simple machines and motors! Dive into the world of pulleys, gears, and…
HAS BEEN TESTED! Findings: belt clamps can skip teeth, toolhead_base may violently rip apart at very high belt tensions CAUTION: TENSIONING THE BELTS TOO TIGHT MAY LEAD TO PRINTED PARTS BREAKING. WHEN TENSIONING THE BELTS PAST THE…
Simple but sturdy wallmount for Dolmar MS-340. Might work for other models as well. OpenSCAD file included for easy change. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 25%…
Still a work in progress If one 28BYJ-48 motor doesn't work on a longer (heavier) blind - then add another!
I do not own an ender3 “v1” so I did not test this installed --- print it with many walls (6 or more) and high infill (40% or more) avoid PLA for this at least the piece touching the motor. the cover is fine in PLA You'll need either two…
Based on https://www.amazon.co.jp/Motors-Super-Power-Nema17-LDO-42STH48-2804AH/dp/B0CD1NMN5L
Radial Fan with casing for small DC motors (6-12V). The Desing could be scaled for bigger Motors. I tested it already and it works really well. The motor is fixed by a 2 Screws and 2 nuts. If you like it / would like to suggest changes /…
![FPV Motor Pliers [support 3-5" fpv motors]](https://media.printables.com/media/prints/656304/images/5615526_c889427b-f8d9-4cd1-9dbc-babd814f0382_c0fdaeb2-b6c7-446c-a1e6-d56efd0068b6/20240110_173318.jpg)
