Counting matching models…
Multi Toolholder for Skadis and HSW (drill/bit/allen) In this download you will find two Versions. One for IKEA Skadis, and one for the HSW Honeycombe This Toolholder will give you 19 slots for Drills (1mm-10mm 0.5 steps) 31 slots for hex…
So far i'm really pleased with my Radiomaster MT12. However, i generally don’t appreciate the small steering wheels that are standard on most pistol style transmitters. So i designed a 12mm hex adapter shaped like a slotted and drilled…
Flite Test Mini Power Pod for the Power Pack A components 12x16 mm hole pattern for an Emax MT1806 motor Dovetail joints at the seams Designed to be printed flat and then glued Printing flat allows layer orientation to optimize strength…
Added some extra protection for the front. Made it in the style of TinnierMonster4 's roof skid plate so that matches aesthetically. I've only tested both on the MT10 V2. I used some leftover m3 screws to fasten it.
No support needed. You only need support for V2 Recommend TPU95.
Use your favorite steering wheel that is compatible with Sanwa radios on the Radiomaster MT12!
chain guard for shimano altus fc-mt101 front crank sprocket. best done in petg, but should be ok in pla.
Team Associated Rival MT10 Replacement Wheel Nut Cover
Team Associated Rival MT10 wheel nut cover tool.
I printed mine in Overture TPU . It's a little squishy but should absorb hits and I never have to worry about breaking it again. 100% infill is probably excessive but I did it anyway. It may work in PETG but I don't know if it will be…
For those running enough power to wheelie an SMT10, here are a couple wheelie bar options. I'm running a 3600 KV brushless with an AX2 2-speed. 3S in high will wheelie or flip instantly. 2S will wheelie on grass, but often just spins on…
Printed in Overture TPU . I've taken it to the skate park a few times and so far it has held up fine. The wheelie bar is optional and no longer adjustable. Being TPU, it is a bit squishy but it works well enough and won't break. I also…
As we could not find a morse taper holder suitable for our needs we designed these interlocking drill racks : Morse taper 1 - 22 positions Morse taper 2 - 16 positions Morse taper 3 - 6 positions Morse taper 4 - 4 positions We printed…
The original part was too wide for my Rival MT10 V2 and it covered the holes for the Body Mounts. So i made it narrower and cut a bit away at the sides. I also cutted something from behind so that it is easier to print on the flat side.…
A FDM printable friendly cap for a 360 prism (MT1000 360 prism or simialr) to replace or repair missing or broken caps. Simply screws on like the original. The FDM printed thread is tight, running it back any forth a few times will…
Team Associated Rival MT10 replacement side Exhaust pipes.
I wanted to mount stuff to the top of my Radiomaster MT12 radio, either for filming and being able to operate the controller two handed (it takes practice!!) or just to mount an FPV screen. Or maybe both??!! Hey, I'm just providing…
The factory wheels on Axial SMT10 trucks tend to strip the hubs. I tried the epoxy repair method, but it didn't work very well so I created a bolt in replacement hub. This hub is designed for a flat 7mm thick 12mm hex. The factory Axial…
upgraded with alternate shock and sway bar mounts
I like to use otherwise unused LiPo batteries w/ the MT12 radio. Unfortunately the original joystick module won't fit, so… I made this version. Printing The design is not optimized for FDM printers because I wanted to print it in resin…
This is my version of a Radiomaster MT12 mount for the Honeycomb Storage Wall system. Print it as you like with your default settings. I always used ABS, 3 Walls, and about 15-20% cubic infill and a 0,4-0,6mm nozzle. Prints without…
Made this to design a pi zero project. OpenSCAD file posted in my github fork. https://github.com/xartle/Python_ST7789 Huge thanks to solinnovay for the SPI driver btw. :)
I managed to break the front cage of my SMT10 when a brick wall jumped out in front of me :-) This is a flat piece modeled to fit the shape of the frame on the front sides to be used as reinforcement. I like the look of the long brace…
Plastic footrest element that breaks when the pit bike falls. I increased its height a little for convenience. Original spare part / оригинальная запчасть: https://sharkminigp.com/producto/juego-reposapies-aluminio-mt12 PITBIKE SHARK MT12…
A replacement front bumper for the Team Associated MT10 V2. Print in TPU and it will be indestructible. The overhangs for this can be a bit tricky with TPU. I went the lazy route and used PLA supports (PLA doesn't stick well to TPU).…
A bracket to hold my GL-MT1300 using countersunk 6x25mm I originally uploaded it to https://www.thingiverse.com/thing:5193344 back in January 09, 2022
A modified version of Stevewasere's GL iNet GL-MT1300 Bracket . The screw holes have been removed and a backplate (with a Honeycomb Storage Wall insert) was added. The original was made for a GL-MT1300, but my model is a GL-A1300 and fits…
Simple holder for MT106 Mr. Hobby Nippers, protects the blade tip. Print settings: no support, 10% infill, 0.2mm
This is a custom made part to replace the cover found behind the divers seat on a Yamaha MT-125/ R125 (2014-2019). Part Number: 5D7-F4796-00-00 Custom made in Autodesk Fusion as a novice. Background When I bought my MT-125 second hand,…
Stylische und stabile Wandaufhängung für 1:10 RC Monstertrucks. Passt für 1:10 Monstertrucks wie Arrma Quake und Rival MT10 vermutlich auch für Arrma Granite, Groom usw. (wurde nicht getestet) Die Schraubenlöcher können abgedeckt werden…
A simple file to center an AMT103-V encoder on a nanotube wheel output. Drill out the mount holes according to the screws you are using. Category: Robotics
I used Sunlu TPU with supports on and no raft. I printed it at 25% infill and it seemed to work fine. I would recommend flipping the model to print it though.
The bottom frame holes on the MT10 are different diameters and the left one has added clearance to go around the protruding nut For best results use PETG or better but PLA would also work Layers 0.2 - 0.28 Walls 4 or more Infill 40% or…
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
DE: Fadenbuchse für eine Stickmaschine vom Typ Melco EMT16 und Melco EMT16 Plus. Gedruckt mit 0.15mm Schichthöhe, PLA und PETG funktioniert gleichermaßen. In aufrechter Position drucken mit Stützen auf dem Druckbett. EN: Thread bushing…
Smaller case for Teltonika FMT100. I used inner threads.
This lantern diffuser base is designed to fit flashlights with a housing diameter of 32.4mm, but it can easily be resized to accommodate flashlights with different diameters. Simply plug your flashlight into the top to transform it into a…
These are fixes for the plastic parts that hold the handle. It is compatible with the Frigidaire Gallery series model FMT148GPB1, I'm not sure about any other. I've also included a larger bottom part (our microwave door's whole corner was…
This can be used to make a DIY groundsheet with attachment points or a pole base frame. These tents require you to first lay down the inner tent, then build the poles. In rainy water, this results in a wet inner tent. This model allows…
Nach Umbau des Hecks auf kurzen Nummernschildhalter fehlt die Abdeckung des Schlosses. Deshalb hier eine Yamaha MT125 Schlossabdeckung. Passt auf jeden Fall am Baujahr 2025 und gedruckt aus TPU.
I printed mine with Creality Black Hyper-PLA with a Creality K1 Max using a 0.4 nozzle and Smooth PEI plate at 15% infill using the default settings without a brim. I dicovered just after starting the print knowing that I would run out of…
Quite a few years ago as I was repairing some carburetors and I could not source this part (or the cost was $70+ so I modeled it for recreation. Recently I found this model while reorganizing my creations and figured someone out there in…
Made for Mustool MT11 Pro, with lead holders on the sides. I designed it with the silicone case on, so if you don't use yours, it will be sightly loose. Printed with PLA, 0,2 mm layer height, placed on the 45 degree face.
DE: Fadenbuchse für eine Stickmaschine vom Typ Melco EMT16 und Melco EMT16 Plus. Gedruckt mit 0.15mm Schichthöhe, PLA und PETG funktioniert gleichermaßen. In aufrechter Position drucken mit Stützen auf dem Druckbett. EN: Thread bushing…
This is a custom made part to replace the cover found behind the divers seat on a Yamaha MT-125/ R125 (2014-2019). Part Number: 5D7-F4796-00-00 Custom made in Autodesk Fusion as a novice. Background When I bought my MT-125 second hand,…
The factory wheels on Axial SMT10 trucks tend to strip the hubs. I tried the epoxy repair method, but it didn't work very well so I created a bolt in replacement hub. This hub is designed for a flat 7mm thick 12mm hex. The factory Axial…
MT10 Body cover tesla truck shape, team assosiated printed with TPU filament, other filaments will break, TPU holds forever. with max parameters 4-5, 100% fill, no support needed for printing, this is the best part for TPU. (top surface…
Simple but effective print only takes 11 minutes and allows you to leave the external module holder attached to the mt12 but protects the pins if you decide to remove the module either 4 in 1 or elrs. Print on its side for max strength .4…
Uses .2mm standard profile in orcaslicer. successfully prints with no brims but your mileage may vary.
Simple bracket to hold rear body posts on SMT10. post is hold in by 1 screw on each side. I printed in PLA and have bashed without any issues
Clone of rear mounts for the front to mount aftermarket swaybar. I printed in PLA and have had no issues bashing
Upgraded Radiomaster MT12 triggers I broke one of my original triggers and rather than buying new ones that are just as weak I made new ones that are beefier and also shorter so they don't catch on things as easily These are made with…
A connection plate to replace broken part of Camlink CL-MT10 mini tripod.
Replacement End Cap for Soonwell MT1 LED Light This is pretty niche, but it's one of those ‘I made it so may as well share it’ models. These lights are pretty nice but the caps on each end of the metal tube are fairly flimsy. One took a…
This is a Model of a TV Tower. FMT12 Fermeldeturm Typenturm FMT12 Owner Deutsche Funkturm located 51.848787, 7.840809 Fernsehturm https://de.wikipedia.org/wiki/Typenturm Print Settings Printer: Evnovo Sidewinder X1 Rafts: No Supports: Yes…
Axial SMT10 Battery Strap for 38mm 3s Lipo Battery Printed in PA12CF or PA12, 100% infill for Strength Use M3 x 5mm BH Screws instead of self Tappers (No Holes in part to prevent Cracks) Print Settings Rafts: No Supports: Yes Resolution:…
Replacement button for the Meta M99T MT100 keyfob. i printed in PLA with 0.16layer height.
