Counting matching models…
Update: V2 is much smaller! V1, named ‘Bigfoot’ by those commenting here, had the majority of its development dedicated to troubleshooting code, with the CAD being a first attempt. V2, which I'm calling ‘Mini-ish’, inverts the joysticks…
3D scan of skull found on the Battle of Visby, where on 27th of July 1361 the Danes fought Gutnic Peasants. The human skull found at the Battle of Visby is a grim reminder of the brutality of medieval warfare. The skull shows clear…
Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…
Print approx. €10.90–€13.32 excl. taxPreliminary estimate for one variant
Video: (I was spinning a bit fast, at x0.75 speed it sounds better in my opinion :) ) Material and Settings: All parts were printed with a Prusa MK3S and printed from PLA . The layer height was 0.3mm (smaller is of course always possible…
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for one variant
Please click if you appreciate my work :) A stylized 3D model of the legendary Mustang Shelby GT500 – an iconic piece of American muscle car history, reimagined with a clean, modern aesthetic. This model isn't just a car – it's a bold…
Print approx. €9.80–€11.98 excl. taxPreliminary estimate for one variant
The model is based on the Ford Mustang GT model 1967. It's not identical to the original car, but did my best to get it as close as possible. The file is scaled to match 32mm RPG miniatures (as seen in pictures). The body and wheels have…
Alright, my friend's in need of a countdown for those pressing deadlines. Ended up with this. V1 Ring Counter VASE/SPIRAL MODE- Size of ring: 21mm Printed on Ender 3 v2 Cura settings: quality-low .28mm bed temp-0 (use EVA glue), else 60…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Optimus Prime from the Transformers.
Print approx. €15.46–€18.90 excl. taxPreliminary estimate for one variant
My kid wanted a mini mushroom pal. I had some MX Cherry switches and figured I could combine the two. I printed with Inland Marble PLA with mostly stock settings. I added a perimeter so I could make it hollow and amplify the noise of the…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Mushroom Necklace Pendant Mushroom necklace pendant or earrings with printed loop for chain or hoop. If you like what I'm doing here, please consider making a small donation .
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Please click ❤LIKE❤ if you appreciate my work 😊 American power – now on your wall. This 3D printable flat-cut wall art model of the Ford Mustang Shelby GT500 brings the raw muscle car spirit into your interior. With its iconic hood and…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
Do you need a clip that's not only reusable but also better than the original onces? Well then this is perfect for you, this reusable/adjustable wristband clip. it's designed to be easy to use and comfortable to wear! How to use: To use…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant
Thalia the Muse of Comedy, Lightheartedness, and idyllic poetry
30/12/2023 - Added new curved version. 07/06/2025 - Added Stl+Step files for left handed version.
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
This is a model Ford Mustang GT year 2010,create by blender.
Print approx. €4.49–€5.48 excl. taxPreliminary estimate for one variant
Respiratory Muscle Trainers (RMTs) are proven to be useful in improving the condition of patients after breathing-related conditions like COVID-19 or COPD. These RMT devices are neither well-available nor affordable in most Low- and…
A tray for your music stand, you can easily attach it at the back of your music stand. Mirrors the iconic style of a music stand Does not interfere with page turning Angled for easier placement of items Lip to avoid items from falling of…
Print approx. €4.94–€6.03 excl. taxPreliminary estimate for one variant
It is said that plants respond to music, they even grow faster when they hear music. We also love music, so why not show it and help this little plants grow. It can be printed without supports. If it is for the garden or for the flower…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Prints should start with black and change to white just above the 2mm layer, then back to black just above 3mm. Color changes are configured in the print and model files. On Prusa MK3S, I was able to print two coasters at a time.
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
Porte clé aux courbes de la belle guitare music man
Print approx. €73.53–€89.87 excl. taxPreliminary estimate for one variant
Holds a beer-bottle 0,33 l + a pencil + a highliter + smartphone Just clicked on the pipe of the music stand with a diameter of 15 mm
Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
100x160mm signs, with the most common musical clefs . Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
This is a reproduction designed from scratch using dimensions from a Ford original floor fresh air vent baffle, specifically for a 1965 Ford Mustang. The part number is C4AB6201820A. I have never found any reproduction for this part, and…
Print approx. €6.82–€8.33 excl. taxPreliminary estimate for one variant
Ce modèle représente un cône de signalisation classique transformé en personnage rigolo grâce à un grand sourire expressif . Parfait pour décorer un bureau, une chambre ou une imprimante 3D ! Impression : Adaptée aux imprimantes FDM et…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
garland / festoon with holes of varying heights for threading, so that it looks like a melody. Happy Printing
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for one variant
Have you ever had an awesome pair of socks with a hole in them, wanted to fix them, watched multiple videos of how to darn a sock, see in the videos they have a darning mushroom, gone to the store to buy darning supplies to find they only…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
An original interpretation of Polyphemus, the Cyclops from Homer’s Odyssey , created as a detailed 3D printable statue. The model is provided as an STL that can be scaled to suit your printer, preferred display size, and printing setup .…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Unlock targeted relief and soothe deep muscle tension with the Piriformis & Psoas Release Tool . Designed to simulate a therapist's knuckles, this ergonomic tool applies precise pressure to hard-to-reach muscles in your hips and lower…
Print approx. €25.53–€31.21 excl. taxPreliminary estimate for PETGSource material: PET
This model should be printed in 3 pieces and assembled using hot glue or another method that will create a bond. It can be printed from the original version if you want to add much support to the model. It will break otherwise because the…
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
You can tune and soften the soundresonance with snowflakes from Oxa! I use this for the beautiful melodie snowwalz from Johann Strauß! https://youtube.com/shorts/lxx9WU_wVQM?feature=share Please look also for my new bigger 210mmXYZ…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
----------------------------- Der Verstellmechanismus an meinem alten Gardena Teleskopstiel kann nicht mehr bewegt werden. Die Stange kann in der Höhe verstellt und in die jeweiligen Vertiefungen noch einrasten. Da der Verstellmechanismus…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
Ornament of musical instrument - CIMBALOM Multicolor by layers (simple extruder)
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Einfache Griffmuschel mit 7.5mm Überstand für Schiebetür. Bohrdurchmesser Tür Ø70mm, Griffmuschel Ø75mm
Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant
Upside Down American Yellow Mustard holder Woeber's Genuine American Yellow Mustard Squeeze Bottle PETG Only Thank you
Original Size ~53mm widest end to end Could not find the lost endcaps for the SKS Primus fender online, so I modeled and printed my own. I tried to replicate as closely as possible, and they came out as a bit too large. It still serves…
Print approx. €1.10–€1.34 excl. taxPreliminary estimate for PETGSource material: PET
2D wall art of Ford Mustang Fastback 10
Intento de animus
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
This is a velcro handle for a choral folder. Print two of these dovetail end pieces which feature a slot for ¾ inch wide velcro strap. You will need 25 inches of the Velcro One-Wrap or a similar product. I purchased this velcro wrap on…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
The assembled unit is an insert in music folders. It is used to hold and organize original sheet music for singers in choirs. The sheet music holder is made up of two parts which can easily be printed on a small print bed. They fit…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for one variant
Mustard Plug - ska band 3D "Evil Doers Beware" logo. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. Colour/layer changes for built in. NOTE: The "pins" in each corner are not printed.…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
This remix of the Mushroom-themed Print-in-Place Twisty Puzzle Box turns it into a simple twist lid container. https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts print without supports Consider…
This is a 3D printed model of the P-51D Mustang from WWII. It features the fin offset and the wing washout of the original P-51. The entire model can be printed without the use of supports. I printed the entire model in PLA. This model…
This model has been nominated for the Printables Awards 2024 in the category 'best 3D Model in Multi-Material Design'. Thank you for your votes! Summary This is a model of a Ford Shelby Mustang GT500 'Eleanor' in a kit / gift card style.…
A print-in-place figure of Optimus Primal from Transformers: Rise of the Beasts. Created by Nikko Mendoza.
I wanted some fridge magnets of these shelf mushrooms. I remixed the original file with circles on the back to accept 10mm magnets.
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — An organic shelf that “grows” from your wall. If you need a small shelf for anything you want to make visible every…
Each part was printed on a P1S 3d printer. All parts except the Lamp Kit Adapter were printed with 0% infill. The Lamp Kit Adapter was printed with 5% infill. The Mushroom Cap Bottom and Stem were printed with supports. You can use either…
Large metric 16cm version of the Mushroom Shelves. Scale to your liking. The newly designed bracket is printed in place (upside-down) and will scale with the individual shelf model. Design #5 and #6 have been added in this remix Update!…
Uploaded15/06/2026 I uploaded a new head file that keeps the dots with the head together, so someone can try to print it in 2 colors. Updated 12/03/2023 A new cute pocket-size rechargeable mushroom lamp at: Mushroom Lamp Components Kit…
A music box that plays never gonna give you up see my other rolls for different songs
Heyho Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But…
Intro A compact and practical bit holder designed to be small, strong, and easy to use . This V2 version adds an ergonomic, textured handle and an improved variable bit fitting that grips bits securely while keeping the tool…
Meet the Mini Optimus Tesla Bot - a one-of-a-kind figure I designed, based on the legendary Dummy 13. This isn’t just a decoration - it’s the perfect collectible for any robot fan, not just those who admire Tesla! Update: 07.02.2025 -…
24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…
The last Metroid is in captivity, the Galaxy is at peace… This is our second fully 3D-printable articulated figure: Samus Aran, from the Metroid franchise of video games by Nintendo. The designer is Dany Sánchez , who is also behind…
An mushroom STL file. Easy print. please rotate the mushroom 180 degrees for minimal support
This is a remix of https://www.printables.com/fr/model/157076-playstation-5-controller-mini-wheel from @pixel2_237985. Presentation The original wheel with two circles was not confortable to me, so I designed a real round wheel to be more…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Support free mushroom skull jar with lid. The lid is not support free. Updated The Less Scratchy with the sharp interior point of concern that causes scratch tribute was removed. Also added an .STL file for convenience. I'll be happy to…
All information can be found here: (Parts, details, etc.) Free Plans 3-D Printed P51D RC Airplane!!! DIY! Make sure to subscribe!!!!! READ! There is a 3mf file at the top, that is saved as a project, so it has stl's inside of it that you…
Ive remixed this to act as a piggybank. original design 3D Printy.
Summary This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE Additional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stl Assembly (See Pictures): Adhere Frame Base Pad TPU to Frame.…
G1 Transformers Optimus Prime base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…
This is a 3d printable roller for your feet and muscles. There are many who believe the benefits of rolling out your feet and muscles, and this can work for both. I saw simple rollers online and decided that I could easily print one. It's…
Thsi is a simple little Transformers Optimus Prime figure that prints best with a resin 3d-printer. Enjoy! Juri
A sculpture of Optimus Primal from Transformers: Rise of the Beasts. The head was designed by the animators of the Transformers film and then made into a 3D model by Morgan Morey AKA Printed Obsession for 3D Printing Nerd . Printing The…
If you like my work I hope you'll consider supporting me on Pateron: https://www.patreon.com/3DPrintingProfessor Subscribe to me on YouTube: https://www.youtube.com/user/mrjoesays After seeing the overhang on tzzhc4's print (…
idkFord Mustang Shelby GT500
Ford Mustang Wall Art Easy to print for up to 1m length (6 parts) on Prusa MK3/4 bed size. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible…
can be printed together the model needs to be glued together or separately in other colours can be printed without support the P-51 Mustang is very realistic Print in place kit card , Assembly required
*UPDATED to V2 - The mustache is now more robust. It prints very well, is sturdier than V1, and perhaps most importantly looks very suave (as all well-maintained mustaches do). I believe that this will print very well at smaller sizes if…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This is the Golden Dendenmushi / Escargophone / Snailphone from the One Piece anime. There are two variations for you to choose: Solid v1 -Completely solid single model Button ver. - Three part model with pressable button. *Ah why not,…
Do you like retro video games? Who doesn't? Looking for an adorable bit of home décor to indicate to those you welcome into your home that you're a cool retro video game loving individual? Want this bowl? Here you go! This bowl is my best…
Power up your desk with this Mario-inspired Mushroom Clicker fidget toy! Designed for fans of classic games and satisfying clicks, this fun accessory brings a nostalgic touch to your day. Perfect for fidgeting, stress relief, or just…
I have found the 3D model as I have mentioned below and then I have printed it with Grey PLA. From the beginning, I noticed it was bad first layer calibration but I let it continue to see the result. :) With better first layer…
The source marked this model as adult content.
Filament leftovers? No problem, print this MUST HAVE sign!
This is a holder for Nintendo Switch game cartridges that is perfect for any Nintendo lover who enjoys punching bricks and curb-stomping turtles in their free time. This is one in a series of Mario-inspired items, so check out my profile…
No support Design The set of two bigger mushrooms is inspired by a fungi species called chanterelle. These mushrooms are meant for the daily-used rings that need easy access, as they are just laying on top of the cap. The second type of…
Made these for decorating a gift (concert tickets). Just traced them out from some pics.
1/10 Mustang Dark Horse Body for DKS-Basic. Chassis modified to fit narrow width. You need to print included rear axle, front bars and steering links. Chassis Link
If you want to support me or get commercial licenses , you can join my Patreon membership starting from just $2 per month: https://www.patreon.com/UniversalMaker3D This is a cool DIY lamp project. The Magic Mushrooms, were intended to be…
Mushroom keychain of Mario world Attache porte-clés PLA Filament : Noulei Antique Gold -> PLA Noulei Antique Gold Follow me on Instagram / Facebook / Beacons Discover My Best 3D Models Axe Magnet ATLAS - The universal strong spool holder…
🍄 Mushroom Fantasy House – Whimsical Charm for Your Mini World! Bring a touch of enchantment to your 3D printing collection with this Mushroom Fantasy House ! Inspired by fairytales and forest folklore, this highly detailed model features…
I have thickened the shell and smoothed it where possible. Not sure if it will be wearable due to some of the cavities inside. Print instructions Category: 3D Printing
Thanks for checking out my lamp. I designed this lamp and wrote an Instructable about the process here. If you want more info on the software/wiring/parts/designing check it out.
After watching my XL print, i noticed a bad behavior that could only be solved by a new part. I really think this is a must have part. I get that prusa(as every other manufacturer) want to have as short as a part list as possible.But this…
EDIT : added a remix of the remix of the remix - little tighter when holding the computer and a little smaller when packed. From the laptop stand by Vivamus3d. I wanted a model a little more sturdy and which would not break or fall appart…
Mario Mushrooms [multi print] no ams needed!
Print the stems and caps in whatever combination you want, they are interchangeable. I recommend clear translucent PETG. LED Strip is a Govee RGBIC 16.4 ft strip: https://www.amazon.com/dp/B0991Q94KP?ref=ppx_pop_dt_b_asin_title&t I folded…
These mushrooms can be printed with a single extruder or be configured to print with a dual extruder for a cleaner effect. I also included the Poison Mushrooms body which has the 'Evil Eyes" if you want to try and make as many Mushroom…
Paris, Louvre Museum, France. These twenty five 3D scans models were generated for the short movie Gloria Victis ( https://vimeo.com/182609342 ) More images here: https://www.artstation.com/artwork/A6doN In this movie, the Cour Marly was…
The P-51D Mustang, the noble stallion of the USAF during the second world war! Goes perfectly sitting next to its allied RAF buddy~ Spitfire Mk.V Kit Card Other WW2 Kits... FW-190 Würger V1 Flying Bomb de Havilland Mosquito F-82 Twin…
I wanted to make a batch of Star & Mushroom cookies from Super Mario game, but I was unsatisfied with the cookie cutter designs that I found here on Thingiverse. So I designed my own. I made both a Large and a Small version (although I…
Parametrized Music Box - Print in Place also on MyMinifactory and GitHub Musical calculations remixed from Parametric Music Box See it in action and in closer I'd strongly suggest ABS or something with good fatigue resistance for this…
![Mario Mushrooms [multi print] no ams needed!](https://media.printables.com/media/prints/69547e41-5f36-4173-a450-1d5a9c0288f9/images/12471363_02cebb75-4981-490f-a9b8-a66114d67c7b_7edf942c-9dd5-4dd9-8c05-14235391592c/2025-04-12_0898572d25f04.webp)
