41 models
Can be used to connect a PVC tube D140 male to a DN160 male system. You should use an original gasket of the KG pipes. Groove is provided accordingly. Eccentric reduction. Designed for smooth fluid transition.
Print approx. €16.44–€20.10 excl. taxPreliminary estimate for PETGSource material: PET
Can be used to connect a PVC tube D140 male to a DN160 female system. You should use an original gasket of the KG pipes. Groove is provided accordingly. Concentric reduction.
Print approx. €12.40–€15.16 excl. taxPreliminary estimate for PETGSource material: PET
I recommend use 6 bottom layers and 6 top layers to increase the strength of the part.
Стационарный кѾрпус для Heltec V3-V4 c воможносью установки энкодера, клавишного переключателя, двух аккумуляторов 18650 либо один 21700. Клавишный переключатель: https://ali.click/hl1puq Рекомендации по печати: Высота слоя 0.2 Без…
Schrauben/Screws 12x M3x12 PETG Schichtdicke 0,20 Infill 20% PETG Layer thickness 0,20 infill 20%
Case I designed as I couldn't find a case for my particular circuits available. My ESP32-S3 had soldered on PINs, so I created a raised bed for it next to the EMS interface board. I also included slits for fixing the boards in place with…
Connects two 20 mm outer diameter empty conduits. Print without support. Don't forget to add a brim to make it stick. With stop lip inside - overhang-friendly chamfered design for support free printing - to prevent one of them from…
Tested and printed without issues using Cura slicer.
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way. This one : 42 Coin Forty two Altairan dollars, legal tender anywhere in the galaxy. The coin is 42mm in diameter; the milled/reeded…
Kleiner Helfer bei der Installation von Wellrohr (Leerrohr, Flexrohr). Der Halter hat eine Nut, damit das Rohr nicht verrutschen kann.
I made this case because I couldn’t find a way to mount it on my HTC VIVE Cosmos Elite, so I modeled and printed this to
I designed this case for the YD ESP32-S3-N16R8 development board because I couldn't find a suitable one available online. Terms of Use: Feel free to: Print this model, use it for your projects, and share photos or videos of your prints on…
Box for insert : printables.com/model/658690-aaaaa-battery-box-5hao-7hao-dian-chi-shou-na-he/files
The original design was great but I needed to include the NVME hat that I had. It should have probably gotten some additional support because the back sags a little. Ill end up having to prop it up somehow.
Hi Everyone, this custom protective enclosure is specifically engineered for the ESP32-S3-DevKitC-1 (N16R8) development board with its pin headers fully soldered and accesso to buttons and leds. Ideal for storage, transport, or standalone…
A solid bracket to wall mount your ISDT N8 N16 or N24 battery charger. I printed it with my Prusa MK4 with the standard 0.15 Speed using Jessie PLA. Use: Print two brackets and slide them on the sides, then mount the charger to the wall.
Menteşe pin boşluk çapı 2.5mm dir.
Case for headless mod of Gaggiuino which uses the 'hacked' FW from https://github.com/a4vgx7b2M/gaggiuino-esp32-loader . Will hold the ESP32-S3 devkit (e.g here ), JST XH 4pin male header ( here ), and SD car reader without voltage…
This is a custom case designed for Project Babble using an ESP32 WROOM N16R8 . The enclosure is specifically made to diffuse the light from the infrared LEDs , improving light uniformity and performance. Important printing…
This minimal shelfing system uses EN16 PVC conduit pipe to store filament spools in 300 mm deep IKEA IVAR shelfing. Each shelf uses less than 50 g of Filament and prints in less than an hour. It is recommended to use a small brim for the…
DE: Die Membran bei dieser Art von Magnetventil reißt gerne ein, und das Ventil funktioniert nicht mehr. Eine Ersatzmembran kostet beinahe so viel wie das ganze Ventil. Bisher wurde ein ganzes Ventil vom Lager abgefasst und nur die…
double heddle block for ten16's rigid heddle loom print 2 of these instead of the heddle braces from ten16 and print a second heddle because of the holes you might need supports I didn't need them because of the modifications we made to…
A printable replacement clip for Napoleon part number N160-0022. Mine broke, so I decided to save a couple bucks and print a replacement. I wouldn't recommend PLA for this since the door gets hot enough to soften that material, I used ASA…
I wanted to build enclosure for my ender 3, so I looked to my local hardware store and choose PPER / PVC tubes. So I created connector for enclosure frame build.
Model might be imperfect due to use of photos as references and TT floor plan scaled for h0. NDN 16 je nadzemní ocelová dvouplášťová nádrž na naftu ve tvaru kvádru o objemu 16 m3Model je v měřítku 1:87(H0) NDN 16 is an above-ground steel…
Pipe Size Explanation This launcher core is designed for PP-R 20x2.8 PN16 pipe. The pipe marking means: 20 mm is the outside diameter of the pipe 2.8 mm is the wall thickness of the pipe material So the inner hole of the pipe is…
My mother needed some clips to keep a thin sheet of plastic onto some piping for her makeshift greenhouse, so I made her some, then I modified the design for common EU piping diameters (DN16, DN20, DN25, DN32). Only tested DN20 and DN25…
⚠ Not yet test-printed. Measured from photos of one board. If you print it, please post a Make or leave a comment and tell me what fit and what didn't (USB ports, buttons, pin slots, lid latch). I'll update the files. A screwless case for…
Adapter für Spitzeende DN160 auf Tonrohrmuffe (Innendruckmesser ~150mm)
I noticed that there weren't any 52Pi/Geeekpi N16 board cases, so I took it upon myself to modify @ Quentin23Soleil 's Geekworm X1011 case to accommodate a 52Pi/Geeekpi N16 board. Might add a power button cutout if there's any interest in…
as of the insekt net wide i needed a DN16 60degree but nowhere to buy and the 45deg is so tiny and breks so i decided to go for a 3mm wall print so it is DN16W60 3mm prints in 20 min fits perfect holds like hell and it is what i needed…
Simple cover to hide wires and some inline resisters on those wires connected to a Zen16 Z-Wave relay.
I wanted to convert a distribution powerbrick from Harting 16 into Powercon true with loop through. This was easy after rewiring the thing this plate was alrready printed the thickness of the plate was required for the screw length in my…
Yep! 😄 For the full description, I'd make it useful both to someone deciding whether they need it and to someone trying to print it successfully. Something like this should work well: Acer Nitro 16 AN16-41 Filtered Laptop Base This is a…
ESP32-S3-N16R8 mini development board, 16 MB, Wi-Fi, Bluetooth 5.0, dual-core microcontroller, artificial intelligence module. Note: The default version is N16R8. The various antenna versions are switched using an Zero-Ohm Link. The…
Стационарный кѾрпус для Heltec V3-V4 c воможносью установки энкодера, клавишного переключателя, двух аккумуляторов 18650 либо один 21700. Клавишный переключатель: https://ali.click/hl1puq Рекомендации по печати: Высота слоя 0.2 Без…
Simple cover to hide wires and some inline resisters on those wires connected to a Zen16 Z-Wave relay.
I wanted to convert a distribution powerbrick from Harting 16 into Powercon true with loop through. This was easy after rewiring the thing this plate was alrready printed the thickness of the plate was required for the screw length in my…
