205 models
an meinem Prusa mk3s habe ich diesen Riemenspanner für die Y-Achse verbaut. Um eine optimale Zugänglichkeit zu den Befestigungsschrauben und zu der Einstellschraube des Riemenspanners zu bekommen, ist es besser das LCD-Display abzubauen.…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
This model is free. If you appreciate this model, please leave a download and a like. If you print this model, please post a make! Pictured on the left, the printed part. On the right you can see the original part. This replacement leg or…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Besonders ästhetisch in allen Prusament Transparent-Galaxy-Sorten! Meine neue Lieblingsfarbe: PETG Kaminrot. Die darin befindlichen Glizerflocken ergeben mit den Fressnelllinseneffekt wunderschöne Kleinst-Regenbögen-Kalleidoskop Effekte.…
Print approx. €2.79–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
Introducing the unbranded version of the amazing TIC TAC GUN 2 by dylcro2! How to build: Install a standard pen spring on the little tab near the back of the gun. Place the 4mm spring barrel into the slot. Line up the trigger with the…
Die Version mit den Ausschnitten ist für die Verwendung einer Oberleitung (siehe Bild). Man braucht die Base zweimal oder die beiden Versionen mit den Cut outs. Dazu das Top-Teil und optional den Connector, um die Brücke von unten beim…
This handle is thicker than standard handles and has some extra reinforcement ribs on the inner side which makes it unbreakable. Cover for screws is also included. Choose correct orientation (left/right) for your door. For outdoor use I…
"Of unimproved metal, hot and full" Fortinbras is a fully 3d printed single shot flare blaster that uses absolutely zero hardware other than 1/8th inch elastic (other sizes should work). It fires using stringer shells that I also…
Holder for the Gardena Classic garden sprayer. Please print with at least 50% infill and without supports. PLA works, PETG works better .... # Halter für die Gardena Classic Gartenbrause. Bitte mit mindestens 50% Infill und ohne Stützen…
CROCS Strap Pin Set (any color you want) I have some white CROCS with a black pin, and wanted a white pin. I used a white paint marker to cover the black up, but this is better now. You can print in any color of PCTG. I designed them to…
LED Magnifying Glasses & Accessories holder for: → Honeycomb Storage Wall (HSW) (2 versions) → Multiboard → Skadis → PEG Board For each version there is a with / without hole file. The hole is just to store tweezer or other things below…
My modified version of NBR 's Ender 5 S1 cooling setup ('El Pablo'). This is to suit the mods I'm currently running including dual 5015 part cooling fans, a 4020 for hotend cooling and NF Mellow hotend. It also greatly improves the bed…
Ein Halter für die Sonnenbrillen im Auto
It's a deeper base (+6mm) and a plate and splash protector to add a vaporizer/fog generator to the Modular Desktop Fountain. The vaporizer is approx. 46mm in diameter and the metal case is approx. 26mm high. You can find it easily on…
Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…
Bei einer Freundin hatte ich einen Solarbrunnen im Garten entdeckt. Fand ich ganz nett und hab ihn mit Modifikationen konstruiert und mit einer solarbetriebenen Pumpe versehen. Ich habe diese genommen:…
Securely attached squash ball feet. Creality Ender 3 S1 Pro only. (Ignore my non-touchscreen, this is S1 Pro) These screw on to the printer base, using the existing holes, and grip onto the existing rubber blocks. The feet are then…
This is a combination of Nathan Builds Robots ('s?) Modder Board Front Cover (extra clearance version) and Bananenminister 's vertical ribbon cable guide. NBR's MB Front Cover is mirrored because the hole prevented me from moving the…
After a year of use of my original design I refined it to make the outer ring more flexible but the inner part more rigid and durable. I also shaved off 3 grams! Let me know your experience with these parts in the makes & comments…
USS Bainbridge (DLGN-25/CGN-25) was a nuclear-powered guided missile cruiser in the United States Navy, the only ship of her class. Named in honor of Commodore William Bainbridge, she was the fourth US Navy ship to bear the name. With her…
A simple mod to cool your fans on your octopus board Files: The printed files have fan holes with 3mm diameter so you can tap screws into the plastic. The CNC files have fan holes with 2.6mm diameter so you can thread the metal. Bill Of…
Die perfekte Silikonfuge im Handumdrehen. Mit meinem Silikonfugenabzieher sind normgerechte 45° Fugen von 6, 8 und 10mm möglich. Ich empfehle die Variante aus TPU zu drucken.
03/05/24: Removed mouse ears from unbranded model 02/27/24: Added a version without letters to cut time and issues printing letters mid-air. I still don't like that the holes for the threads are separated, adding less than 2gr of filament…
Tired of snapping carbon fiber arms or cracking rigid plastic frames during basement laps or sidewalk proximity flying? This 2-inch micro frame is designed specifically for durability and flexibility, utilizing the unique properties of…
Bei einer Freundin hatte ich einen Solarbrunnen im Garten entdeckt. Fand ich ganz nett und hab ihn mit Modifikationen konstruiert und mit einer solarbetriebenen Pumpe versehen. Ich habe diese genommen:…
This is a set of models to add multiple 4020 fans and supporting brackets to your Ender 3 S1. They are designed to use together or just some of them. The parts cooling shroud has z-height adjustment. Ribbon bracket has strain relief and…
One of the first tool purchases i did when i became a plastics processing technician apprentice was a Mitsutomo unbraco keyset for tool changes. Carrying the set in my hammer loop has worn the rubber to the point of i-can't-be-arsed…
This is a variation of the Nathan Builds Robots Modder Board Front Cover (extra clearance version) that has been modified to work with my 30mm chain links. (See my models for reference). This cover clears the left stand and aligns the…
Description I designed these sunglasses a few years ago after my sunglasses (Okley Holbrook) broke while mountain biking. The goal was to reuse the lenses and have an affordable frame that could be easily and cheaply replaced if damaged.…
Replaces and upgrades Kenlin Rite Trak 1 Drawer Track Guide and Glides Fits manufactures such as Vaughan Bassett, Legacy, Pulaski, Lexington and others. Made to be as strong as possible instead of as cheap as possible. These go on tight,…
PRUSA 3RC Based remix, shorter, without branding for 2x faster printing. Print 2 in 3 hours instead of 1 in 3 hours. Branding removed for easier disinfection as stated by hospital staff. Print instructions No brim required, place 2 in a…
Caliper depth measuring foot to fit an unbranded vernier caliper with body dimensions 16mm * 3.5mm having small plates on both sides I added a headless M3 screw to secure the caliper in place but a standard M3 screw can be used too…
This is a small replacement part for my roborock, as the original part got damaged. I made this part flat so it is easier to print. So far I had no issues using it. If you would like to tune this part, reduce thickness in your slicer. For…
Hack up your allen keys , heat key up and insert into handle.
Print the part with 100% infill and glue it with a few drops of superglue to the lid.
This is a simple and practical mount designed to easily attach your Raptor or Otter scanner to the Creality Scanbridge . Perfect for users who own multiple scanners and want a hassle-free way to switch between them without constantly…
Original Design → https://www.thingiverse.com/thing:687066
Original Model Found Here I took iListen2Sound's modified model of the ‘NathanBuildsRobots Modder Board Front Cover’ for the Sprite Extruder (the extra clearance model) and cut some material from the top to make it a flat surface so that…
LED Magnifying Glasses & Accessories holder for Ikea Skadis Halter fuer LED Lupenleuchte und Zubehörbox für LED Lupenbrillen HSW and Multiboard Version see:…
Some of IKEAs inserts for KALLAX are not screwed in, so if you for example push a drawer from BLÄDDRA in too far, you can push the hole insert out the back. To stop this from happening I designed some simple parts to screw or glue on. You…
These are divider tokens to separate the new categories of Baddie chips (Break, Krelln, Mech) found in the expansions Undertow and Unbreakable for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each…
Jeder der einen Segelkurs macht weiß - zum Knoten üben ist ein Knotenbrett sehr hilfreich. Viel Spaß damit (man kann auch den Namen als Geschenk mit draufdrucken) Everyone who takes a sailing course knows - a knot board is very helpful…
Für den Zusammenbau werden noch 4 Kugellager 625Z und 4 Schrauben M5x20 (oder etwas länger) benötigt. Seitenteil und Innenwelle müssen 2x gedruckt werden. In der Innenwelle ist das M5 Gewinde dann schon drin. Gedruckt wurde mit PLA,…
These are the Nine Pillars of Nosgoth. I designed the five pillars, and people liked that, so I decided to create the nine. These pillars are unbroken (and determinately marble, so not "greek" by design). They're more true to the game…
Ablage / Organizer für VW T3 Camper Armaturenbrett
Skyrim Dawnbreaker Main work by Bethesda https://bethesda.net This is my attempt to use an ingame sword for 3D printing. I extracted the files directly from skyrim and reworked them so it is printable. The sword is splitted into some…
I've edited the original object to make it flagless and textless. There is also a simplified version that is less hard on CPU/slicing.
Remixed the great model by plomdawg to remove the ifixit logo
Ein Bremsschlauchhalter zur ordentlichen Befestigung des Schlauches am Fahrzeug. Dieser wird an dem Befestigungspunkt des Schutzbleches angeschraubt und hält somit sicher den Schlauch an Position, damit dieser nicht beschädigt wird. Es…
This is a unbranded LCD Display Case for the 2004A Display that also PRUSA uses. The other parts can be downloaded from Prusa website or elsewhere, gonna add them as soon as i have some time! Its a remix but for now i dont have the link.…
Remix of BoA's model to make some changes to fit the EK AIO cooler. How to choose original or remix: If you are using for fans on an air-cooled build, use the remix, because of the eliminated airflow cutouts. I also recommend gluing the 2…
This is a simple and unbreakable replacement of a fridge door handle. I made the first design in FreeCAD. It is small and convenient. Pretty stable, hardly ever will it break, due to its optimal form. It hooks over the door edge to grab…
just a simple model I made to reduce clutter on my bathroom counter. Make sure to print upside down from how the model is oriented to ensure the arms are strong enough to hold. I used PLA+ and it seems to be strong enough to get the job…
I needed to mount 360mm radiator into my chenbro rm4220 case to cool down new components. It is not for faint hearted as it requires removing a lot of elements from the case itself, and drilling new mounting holes.
Original design by PhD Poturak Semir: www.Linktr.ee/3esign : No needs for supports, regular print settings should do. Unique geometrical design makes Frisbiee unbreakable against concrete or any other hard surface.
This custom Db shell adapter is made from 100% PLA, a durable material that requires no additional hardware. Each shell is printed in approximately one hour, offering a quick solution for your dart needs. The design is versatile, allowing…
I have a cheap unbranded DMX controller which seems to be a common item under various names. I wanted to give it colour-coded buttons for scenes, fixtures and the other functions, and also Red, Green and Blue sliders for the relevant…
Printed in ABS with my Voron 2.4. For the heat inserts I used M4 with 5.5mm outer diameter and 4mm in length. The important part is the diameter of the insert as it is possible it won't bond good enough with the plastic with smaller outer…
Das ist eine Ablage für Sonnenbrillen - bei uns ist sie an der Wohnungstür angebracht. An der unteren Ablage ist eine Möglichkeit zur Aufbewahrung von 2-Euro-Münzen vorhanden. This is a shelf for sunglasses - we have it next to the…
**EDIT** This currently doesn't appear to fit R1 correctly, it's too deep for this filament sensor foot. An R1 fixed version is now on the original upload.
English description (deutsch darunter): The two quarry trays can be placed directly in their place in the game. For even more organisation, take a look at the complete insert: https://www.printables.com/model/1131787 Deutsche Beschreibung…
most medical facilities are asking for no branding as it increases the difficulty for disinfection. I can't say how thankful I am for the strap file so I hope you'll forgive my debranding remix. Also I wanted to avoid people with very…
Removed the gap for the thermistor connection.
Schwimmer / Pose mit Knicklichtanbringung
Printed with PETG. Please select support to “everywhere” in the slicer! Original rivet was replaced by a M4 screw. Mit PETG gedruckt. Stützen auf “Überall” im Slicer einstellen! Die originale Niete wurde durch eine M4 Schraube ersetzt.
Mounting plate for Chenbro RM42300-F2 4U server. For the front enclosure area, where there is possibility to add 3U of extra interfaces (ie CD/DVD drive). Fits a 120mm PC fan. For mounting, you need: 4x M3 square nuts (fits inside plate…
Updates the original bracket to better fit a micro servo rather than having to use washers. This updates the hole mounting so that the bracket will natively fit a micro servo https://www.printables.com/model/734327-extruh-pen-plotter
Vulkan's Dawnbringer VULKAN LIVES!!!!!
[EN] Turn your regular Hex key / Allen key into a "multi-key" This adapter allows you to use an Hex key / Allen key and any standard 1/4" Hex Bit. This adapter is the "sister" of the adapter for 1/4" socket wrench. You can find here:…
version of the bonnet for ProfessorBoots rc tractor without "BOOTS" written on the side
One of my server cases (Chenbro RM42300 and RM41416) was missing the handles on the front. The respective L-brackets on the side were still mounted to the case. You can probably fit those handles to other Chenbro cases, too. Required…
I tried my hardest to make something almost unbreakable and its finally here, introducing... Unbreakable Ball (Almost)! We can't promise this being unbreakable but it will stay afloat in water, survive most of the harshest of…
Modified version of the DragonBrick cowl . I slightly increased the wall thickness around the screws that hold the printhead in the dock for MadMax Toolchanger The overall geometry and compatibility with the original design are unchanged.…
Cooles Lama mit Sonnenbrille & Krawatte – Lustige Dekofigur
Entlüftungskit für Shimano Scheibenbremsen
I remodeled the glide from the linked model. The original glide has a cutout and ramp to more easily allow the drawer to be installed. There's a bump in the track on the drawer that presses down on the glide. The ramp makes the drawer…
Great original model customized to make it work on walls.
I do believe I modeled these with the use of half inch wood for a blade as the primary idea. Printers are different sometimes, so its easiest to print and then measure. (so long as you have access to a table saw) Although I find that a…
Univerzální nosič optoelektrického snímače pro vodoměry ENBRA ER-AM. Do nosiče je možno vlepit vložku, která je k dipozici ve formátu .STL a je určena pro reflexní optické čidlo z Aliexpress.com, typ TCRT5000 viz fotografie. Před použtím…
🌀 Model Description: Meet the TwistAir Pocket Fan – a simple but effective hand-powered fan, perfect for hot days. No batteries, no wires – just spin it with your fingers! Compact and lightweight, this fan fits in any bag or pocket, and…
Clip zum anbringen an das dreieckige Seitenverkleidungsteil unterm Sitz einer BMW R1100GS Gedruckt mit PETG 0,1 mm Layerhöhe 25% Infill
Ich habe auch den Passenden Schlüsselanhänger dafür ;-)
I have a Chenbro RM42300 case here in my homelab, and at the moment I need something to have it standing upright. Without modifications, the case would rest on the mounting flaps of the case in the front. I didn't opt to go for a fully…
A colleague at work asked me to print a Pokeball for his children that could be thrown on the floor without breaking. I found various Pokeballs here on Printables, but none that met the requirements. They were either balls with an opening…
I was missing a shower for the watering can and I thought everybody can buy it, so I sat down and designed this attachment for a 10 liter watering can. I designed it so that it is easy to print and has a large print area. I printed it in…
Insert for the game Unbroken by Artem Safarov. Fits unsleeved cards, sorted by type for easier setup, with tokens and even room for the baggie. Sorry, no sleeves, the box is just too small for that for this insert. All other content goes…
zum verkleiden einer Windmühle war ein Balkon nötig der in Selbstbauweise erstellt wurde!
Printed in red PLA with 0.2 layer height, 3 walls and 15% gyroid infill.
Not having found any good cable guides that were compatible NBRs Modder Board, I decided to take it upon myself to make one that I would personally like to use. I printed mine in PLA with a 0.4mm nozzle, 0.2mm layer height, no supports.…
English description below. Teileliste: Gedruckte Basisplatte (dieses Modell). Senkkopfschraube M4 (optional). Runde (schwarze) Plexiglasscheibe 70x3mm (kaufen). Rundes doppelseitiges Klebepad 60-74mm (evtl. 2 mal). Außenduchmesser: 74mm…
Halterung für die Daisy II von Uhlenbrock. gezeichnet für Senkschrauben Ø 4,0 bei bedarf kann das Model in Fusion 360 angepasst werden. Holder for Daisy II from Uhlenbrock. drawn for countersunk screw Ø4,0mm U can edit the file in…
Print in native orientation (as loaded, diagonal side down)
Überblick Befindet sich ein Heizkörper in Nischen oder hinter Vorhängen oder Möbeln (wie in meinem Büro) staut sich die Hitze. Dieser Lüfter drückt diese Wärme aktiv in die Raummitte. Effizienz bei niedrigen Vorlauftemperaturen: Das ist…
🇩🇪 Beschreibung Ich hatte immer Probleme die Bremsklötze von Magura Felgenbremsen in allen Dimensionen korrekt auszurichten (vermutlich eine Frage der Übung …) Mit dieser Lehre ist die Montage ziemlich einfach: Die beiden Schablonen…
This is a remix of 2 models, the cable chain by FizzyChicken and the NBR cable clip by JackManBob. (https://www.printables.com/model/775003-nbr-ender-3-s1pro-easy-cable-clip) Suggest printing at imported angle for optimal support. PETG or…
My Ender 3 S1 Pro has been upgraded will Nathan's modder board (Nathan Builds Robots, NBR) and Gulfcoast's x-axis linear rail kit. The issue this remix solved was that the original design was making contact with the right vertical pillar.…
“Strengthens the bearer, increasing the damage they deal to enemies with their nail. This charm is unbreakable.” True strength demands sacrifice. The strange old beetle named Divine swallowed your fragile charm, and it seemed lost…
Based on West3Ds z-barracks. I wanted a non-branded barrack, so i just did some editing in Blender3d.
