2,796 models
This is a guide for the Magnetic Printbed, so you don’t have the hassle of aligning the Printbed onto the Magnetic bed. Just put double sided tape on the two objekts and stick them in the back corners. Warning : Use heat resistant…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for one variant
Created this so i had an exact fit with exactly .2m height on my Elegoo Neptune 4 Pro. Prusacliecer 3mf attached.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for one variant
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Disclaimer: this is provided as-is to tweak your own profile, use at your own risk. Rename the file to .curaprofile to import. You will need to adjust this depending on your filament. This profile is based on Elgoo Rapid PLA+ and a stock…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Original Elegoo tool holder V2
This is a remix of the original Phone Stand: https://www.thingiverse.com/thing:2120591 I adapted it to fit better my OnePlus 8. The major changes are: The height of the stand has been increased in order to have more space underneath the…
Print approx. €5.03–€6.14 excl. taxPreliminary estimate for one variant
Utilizing a retractable badge holder to keep the cable up and away from the print area.
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
The light of my Elegoo Neptune 4 Plus was a little to bright for my liking. So i desgned this. My recommended print settings: * 0.4 mm nozzle * layer height same as file name * 4 walls * infill doesnt matter * You dont need supports Happy…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
OnePiece themed key holder
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
It's handy for keeping it dark at night if you sleep in the same room, or protecting against unwanted touches. Handy for if you have a pet that likes to touch everything or just keeping unauthorized people from pressing buttons. It sits…
Print approx. €1.01–€1.24 excl. taxPreliminary estimate for one variant
I use the CHEP E-Leveler, and now the new E-Leveler2 device to level my Creality machines and recently added the Neptune 3 Max machine to my arsenal. Using the original G-Code files provided by CHEP, I modified the code to add all 6…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Use 2 of the clips to hold your cables together Printed with: 15% infill 0.15/0.2 mm layer height 0.4 mm nozzle PLA
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Extruder Nozzle : 0.4mm Layer Height : 0.3mm First Layer Height : 0.35mm Top and Bottom Solid Layers set at 3 Seam Position : Aligned Seam Gap Distance : 15% Scarf Joint Placement : Nowhere Perimeter Generator : Arachne Fuzzy Skin : None…
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated You know you printer has 2 heated bed zones right? Let's make it work with OrcaSlicer automatically! Guide [ If you haven't created a…
Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant
Hi Im Umar Shariff, this is the Remix version of oneplus 11 model from https://www.printables.com/model/794088-oneplus-11-cover/files I've Added IR Blaster Hole, Sim Insert Opening And Oneplus Logo From…
A thicker version of my previous phone stand for thicker covers.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Decided to make my own Tray/Nozzle Holder for the Neptune 2S. Holds the 4 included nozzles, the 2 bowden tube holders,
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
Nepalese Prayer Wheel
Print approx. €14.20–€17.35 excl. taxPreliminary estimate for one variant
I made a case for the OnePlus Nord 3. It is designed for printing from PLA. I recommend changing the layer height and smoothing. Turn on the supports. Maximum layer height 0.15. Ready for MMU3. In the back part, there is a metal sheet for…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Nepalese Koozie with Griffen Handle Not AI. Rendered in Blender. Designed in Blender
Print approx. €15.26–€18.65 excl. taxPreliminary estimate for one variant
A simple example of powerful and useful modifier meshes in PrusaSlicer. It gives you an opportunity to easy personalize STL files. Read this tutorial to learn more:…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
This is a bike mount for the OnePlus and similar. You need two M4 x 30 socket head cap screws and two hexnuts. OnePlus 6T and similar: Phone width is 79mm The tube diameter is 28mm tube diameter 34mm (update 2020-11-04) OnePlus 9 Pro and…
Print approx. €3.59–€4.38 excl. taxPreliminary estimate for PETGSource material: PET
This is a smooth design for a simple universal usable wardrobe hook. When the hook is not in use, it looks very inconspicuous, if printed in white! Fits for different items: caps, helmets, headband, scarf etc. Update 13.11.2024: Larger…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
M4 Lock Nuts set of 6 for Neptune 4 Max
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
Please like and download my model. Visit my page to get more 3d model. Thank all, Have a good day. If you have to place the machine at a 90 degree angle because of space constraints, you may need this mount, which slides on a rail on the…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
The Oneplus Buds Z are a great set of affordable wireless earbuds. However, they always fell out of my ears when jogging, working out, or doing any active movement. Unable to find solutions from Oneplus, I decided to take matters into my…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Kaple svatého Jana Nepomuckého Vznik: 1899 Na památku Jana Nepomuckého Generální vikář pražského arcibiskupa Později uctívaný jako svatý Mučedník katolické církve a později jeden z český zemských patronů
This model is designed to mount onto the end of the rails on the side of the Neptune 4. I've tried it on the Plus variant but it should work on all Netptune models. It's designed to mount with two M5 x 20 bolts
Print approx. €1.76–€2.16 excl. taxPreliminary estimate for one variant
👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…
Build plate corner guides for the Elegoo Neptune 4 and 4 Pro printers. It accounts for the margins needed to give clearance to the underside of the heatbed You can stick it with double sided type, I used VHB. Printed in PETG for more…
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Made this to be able to put the bed back in place more easy and add a cable chain on my neptune 4 plus Thanks to: scrogathon & Matt Queen & Sascha and Berry C & Daan87423 They Helped me a lot for making the mount possible on the neptune 4…
How to setup the profile: Go to File → Import → Import Config Bundle and select the .ini file. Download this program and go to Print Settings → Output options and replace “thumbnail-path-here” with the path of the program you downloaded…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
After setting up my Neptune 4 Plus I thought it was a pretty big shame that there was no cable management. It just looks sloppy. Looking at marketing material there is nothing done to spruce up the look. Always thought this chain has a…
Update 05.05.2023: I added a solid version of the design so you can basically choose your wall thickness by setting the perimeters as desired or print solid resp. with sufficient infill if you don't trust your filament ;D…
Start G-Code (Version-Date 29. May 2024): G90 ; absolut coordinates M83 ; extruder relative mode M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling M140 S[bed_temperature_initial_layer_single] ;…
A simple and strong clip on webcam mount for your Elegoo Neptune printer. Supported Printers (please compare the below image for other printers) Elegoo Neptune 3 Pro Elegoo Neptune 4 Elegoo Neptune 4 Pro The printer needs to look like…
V6 Prototype Update: As I'm currently not really motivated to further redesign the fan shroud, I thought to add the last prototype I made. I think I'll finish it in the future, but not right now. So maybe one of you can play around with…
Designed for the big bed of 4 Plus 320x320 with 9 connected areas. With 1 or 3 layers at 0,2 layer height
I went to iterate on the Belt Tensioners. The ones available do work just fine but i wanted to have them look more integrated into the Neptune. x-Axis: There is a 4 Pro specific version included. y-Axis: There is a Plus & Max specific…
I created these to reduce noise and get better print quality. Use tape/string/zip ties to make side walls for better stability. Put the smaller ones on the rear of the printer. Print using PET-G. These do seem to be working till some…
Also see my LED difusor remix for Neptune 3 (pro) / 4 (pro) https://www.printables.com/cs/model/665424-elegoo-neptune-3-pro-light-bar-slim-diffuser Z mount is made from 2 pieces GLUE them together around 36 chains will be needed around 42…
Prints great with 2.mm layer height and 3 perimeters
UPDATED 5-7-2023 7:10PM PDT: Updated to include the missing shorty version: Neptune 3 Pro Shorty Shroud -5015 Fan.stl UPDATED 5-7-2023 10:30AM PDT: Now supports ADXL345 accelerometers. Updated the two shrouds and two fronts to have mount…
I was looking for a way to reduce vibrations on the Neptune 3 Plus and by looking at designs for other printers, I came up with this version. As I did not come up with this entirely myself, I have tagged this as a remix of another design…
Hi ! Fixing clip for the leveling wheel of the Elegoo Neptune 4 Pro 3D printer. It prevents the wheel from turning due to vibration. Over time, it also appears that the wheel is trying to turn even with the clamp. But this is a simple…
This is a remix of the cable management chain for the Elegoo Neptune 3 PRO printer. I recommend downloading the .zip file ! and read notepad ! I recommend printing .3mf Please read the assigned notepad. The upper X chain is not needed. It…
Designed these to make lining up the build plate easier on my Neptune 4 Max. Not sure if these will fit on different model Neptunes as I only have a 4 max. Both sides mount using stock screws. Parts are tight so some force is required to…
These bed screw locks help ensure the bed screws stay in position. Each notch translated to 2 minutes of movement, which is useful for dialing in the manual bed leveling with Klipper's Screw Tilt Adjust. Note Elegoo has developed an…
Redid the mount to make it way better to print. You need no supports just print it flat on it's back. The new file is the v3 I also raised it slightly so if you want to go full cable chain it will work now on the neptune plus and max :) .…
An improved version of the OEM cable clip on the x-axis of the elegoo neptune 4, 4 Plus, 4 Pro and 4 Max. It doesn't pinch the cable like the original one does and has an angle that prevents the cable from touching the z axis' lead screw.
This is a better holder for the extruder cable for the Elegoo Neptune 3 pro/ plus/ max Alsow I made anti vibration feet for the printer…
An extra filament spool holder for Elegoo Neptune 4 Plus printer. You can use it for multicolor prints to hold the second spool. Print tips: infill: 30% no support needed
All details are in the PDF uploaded: Design, BOM, Printing, Some assembly details Files you will find here: Photos PDF “Lack enclosure documentation_Vx.pdf” All STLs Full assembly in STEP ------------------- Our intent was to be able to…
Elegoo Neptune 3 Max First Layer Calibration Test Just slice and print as aligned!
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
HalfManBear's shroud design but with multiple optimizations delivered in one package Thanks to Layer.Shifted for pointing out the airflow problems! Special thanks to @mcbabo for making the assembly illustration! 🤩 Do you like the design?…
Fits all Neptune 4 variants. This fan-mod targets to provide better cooling then stock while sticking loosly to the stock design language while integrating 2x 5015 Fans and 1x4015 Fan. There is a PDF with assembly instructions. It also…
This model is a specially designed X Carriage Leveling Support for Elegoo Neptune 4 Pro 3D printers. It is crafted with the purpose of ensuring accurate leveling on the Z-axis. Mounted under the X-axis carriage, this support provides…
This is a better holder for the extruder cable for the Elegoo Neptune 4/ pro/ plus/ max
It's an accurate (with fillets and holes) 3D model of the Elegoo Neptune 3 Pro/Plus/Max and 4/4 Pro build plate to be used as a custom background in PrusaSlicer, SuperSlicer or Cura. I've added an embossed Elegoo-logo for a slightly…
Thanks to https://www.printables.com/@Toonerit for original model for 3 Max, this one update for 4 Max to hold auxiliary fan cable/
The rapid movements and vibrations of the printer have a tendency to loosen the belts on the Elegoo Neptune 4 Max. These stoppers will lock the tension knobs. For some reason, my CAD program flips the exported .step files on the y-axis.…
Anti-vibration feet for Elegoo Neptune 3 Pro. I used them to isolate the printer from the enclosure I built to reduce noise, they are quite effective. They fit onto the existing rubber feet of the printer. Printed with Devil Design Black…
I do not use Cura and so I created a PrusaSlicer profile for the Elegoo Neptune 4 Pro (should also work with the non-Pro). This not perfect and there are still some things that need tweaking but it works well for me with the included PETG…
update(mar 01, 2025): 4Pro has been made compatible by Woodworker - see remixes update(jan 24, 2025): 4pro is currently incompatible with the section ZMount<>Extruder cause it a very different mounting plate - just follow the recommended…
This is my first Remix ever so I hope that all will be right. :-) I remixed EDnation splendid design to fit my Neptune 3 Pro as the orginal was not big enough. I did it by extending the bottom corners by 60mm to fit the 3 Pro including…
This tool organiser is designed to complement my side mounted tool holder for the scraper and a flush cutter. https://www.printables.com/model/655767-side-tool-holder-for-neptune-4-plusmax I've designed this draw to sit underneath the…
Elegoo neptune 4 z-axis stabilizer was made from the front part. This time it is connected both ways.
Made an identical second spool holder to add some symmetry. Also handy to have a second colour already on the spool if you want to do dual-colour prints. Print Settings Rafts: No Supports: No Resolution: 0.28 Filament: Generic PLA Notes:…
Winnie the Pooh, a character in the Winnie-the-Pooh books by A. A. Milne. This is a onepiece version of Winnie based on my multi-part Winnie model that I've previously posted and is in proportion to my Eeyore model. I teamed up with…
I found it very time consuming and confusing to find the right part and print it in the right amount. Therefore i decided to upload a full set to make it easier for people to get started with their cable chains. In the provided .3mf you…
Extruder Halter mit Filamantsensor Aufnahme
Side mounted scrap box especially designed for my Elegoo Neptune 3 Pro but can also fit many other models (Neptune 4 and pro, plus and max declinaisons) The box is slid on two rails glued on the chassis with double-sided tape. Printed in…
Just a simple modification to @BorisAvramov_915542 's original X Axis model. The Neptune 4 Pro assembly is slightly different requiring the thin ridge mating to the printer's housing to be a little shorter. The model is a tight fit like…
For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…
Please refer to https://www.printables.com/model/581649-elegoo-neptune-44pro-cable-chain and https://www.printables.com/model/596277-elegoo-neptune-44pro-cable-chain-new-90deg-mount-z/files for the full set of files you need to print for…
UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…
tool holder for Elegoo Neptune 4/4 PRO
I suppose that this stl may be useful to other n4 users also. This is ment to be a temporary fix. Mine extruder lever broke apart just after only a few filament changes. If your extruder starts to make clicking noises during the print, it…
The Neptune 4 Waste bin is a rectangular waste container that snaps onto the left side of the Elegoo Neptune 4 or Neptune 4 Pro. It may fit other printers with 40 mm square extrusion frames. It's surprisingly useful to have a little bin…
Print 3x of corners and 1x of back left corner
Allows full-volume prints. (Does not fit base N4 model) Uses original M4 Hex screws for initial mounting. Requires 2x M4 Nuts & 2x M4x25mm bolts Front mount total machine height (N4Pro inc 1kg spool) = 57.75cm Allows Max Z height printing…
I just want to make the elegoo Neptune 4 max community lives a bit easier… i did not find on this site a Y axis belt tensioner stopper for my 4 max… but thankfully for the creators of thingiverse.com mk659 and SebastianRubner i was able…
Eeyore, a character in the Winnie-the-Pooh books by A. A. Milne. This is a one-piece version of Eeyore based on my multi-part Eeyore model that I've previously posted. I teamed up with maker/designer rebeltaz (Derek Tombrello) for this…
Overview This is not for printing but for use in Prusa Slicer so you can have a cutaway model of the Neptune 2 and a custom bed texture. How to use After downloading the files. Open Prusaslicer and go to Printer Settings→Bed Shape→set.…
Modified model tool holder for Elegoo Neptune 3 PRO For use of the upgrade with chain. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 20% Filament: AURAPOL PLA BLUE…
Elegoo Neptune 3 Pro First Layer Calibration Test Just slice and print as aligned!
To prevent the rotation of the belt tensioners in the long run, I have designed a suitable bracket. Print Settings Printer brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20%-40%…
These models are directly from Elegoo, they are replacement parts/upgrades for their FDM printers. Some of these come preloaded on their usb drives. I've pre-ordered a Neptune 4 Pro and will post prints once I have it! Elegoo Neptune 2,…
Quick to print, support-free design. The Volcano WindWarden adapter mounts a 5015 blower for improved cooling after upgrading to a Volcano hotend. No screws are needed to hold the fan — it clips in securely. The height is adjustable to…
Sonic, the title character of Sega's Sonic the Hedgehog video game franchise, created by Naoto Ohshima and Yuji Naka. This is a onepiece version of Sonic based on my multi-part Sonic model that I've previously posted. Since I do not have…
Version 2 is now available for download! Version 2 features a sturdier mounting system that clips in place, no more worries about your webcam falling off the printer! This version also slightly moves the camera back so it has more space…
This stand will only work with the OnePlus Watch 2. This was inspired from the Pixel Watch 2 Charger Stand v5. Designed the model new from the ground up. I lessened the height, rounded both ends and refitted the model for the OnePlus…
Sharing Cura Profiles for the Bambu Lab X1 Carbon. Could be a good stating point for those who want to print PlanePrint RC planes that require the P3 Surface profile. If you want to use these profiles, I highly suggest using Cura 5.3.1…
A simple runout sensor holder for Elegoo Neptune 4 Plus with two filament holders. Very useful for multicolor prints. Installation: remove existing holder fix with one of the screws the mount to the filament holder place the sensor screw…
![Elegoo Neptune 4/Pro OrcaSlicer V2.0.0 config [New Firmware]](https://media.printables.com/media/prints/609896/images/6512090_0000f0c6-71c5-412c-915d-776f786325d3_f907e120-f93d-475e-8798-5d4567f5e812/banner-orca-slicer.webp)
