89 models
IMPORTANT UPDATE There is a newer version of the phone mount for VanMoof, which includes cradles for multiple phones and will be updated in the future. This version here will not see any updates in the future. You can find the newer…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
This 19 inch 1U rackmount for the HP Elitedesk mini series is perfect for homelab enthousiasts that want 1 or more HP 1 liter pc's and rack mount them. The mount consists of two printed parts that both can be printed without supports by…
It helps you offset pinda and nozzle far easier than paper and ziptie method. Note: It is for newer S Pinda 1.5mm only. For 0.8 older version, you could open freecad file and decrease pad from 1.5mm to 0.8mm, then export stl file. Steps:…
Tuned profile for printing with Fiberflex 40D filament. Optimized for use with supports, HQ surface finish and multiple parts printed at once. Out of the box, you get a little bit of stringing, and also great finish and flat seams. Below…
This model is a remix to fit different MacBook models. MacBook slot is designed to fit all the models with M2 Air form (M2 models and newer), also it has extra space if you use cover case with your Mac. iPad slot fits iPad Pro 11'' with…
This is an Intel NUC 8 or later extender to give "Slim" models an SSD mounting plate. I used M2.5 heat set inserts on the top of the plate to interface with the existing NUC bottom plate, and M3 heat set inserts on the side for the plate…
This 'Philips Sonicare 4100 Travel Case' is a remix of the ‘Philips Sonicare Case’ by @Vasilii. Travel case for the Philips Sonicare 4100 newer model toothbrushes, holds 2 brush heads. This version is for the newer models that are shorter…
A combined AMS riser and light bar in one. This remix is a pretty big departure from the original, completely new gluing sytem and has been adjusted to suit the newer (?) AMS units with the front feet closer together than the rear. My AMS…
I created a funnel to suck the air out of the filament zipper bags. It fits on Dyson V10 or newer vacuum cleaner. The release mechanism is a little bit stiff. I think this will be better than a lax fit. Happy printing ;-) Print…
Made a holder for newer Shelly switches. Hope it's useful for you. You can print it with every available filament, except FLEX/TPU. Layer 0.2 mm PLA from DasFilament…
Stern shooter lane protector. Print vertically with "v".s pointed up.
This model is made to be printed with flexible material. I used TPU and it fit well the device. No support needed, just print it as it is oriented in the STL. Enjoy your ride and be safe!
This is for the newer(rounder) style handle. Build in PETG. Depending on the brand of chapstick and label thickness, there may be some tearing or catching of the label. *The fit is tight, you will have to turn it 90 degrees and press onto…
Cordless tool battery adapter. Makita Battery to Bosch Green tools - this emulates the battery pictured Extra hardware 9.5mm male spade terminals (https://www.aliexpress.com/item/4001062653078.html) wire fuse terminals M3 x 25mm bolt bolt…
This Version is for AMS ordered (March/2024) and later/newer. With 3 large chambers / slots. If you want to try it first, you can print just a few layers, stop the print and make a fitting test.
UPD 27.08.2024: Uploaded a version with a tighter fit. The original is now marked “Clearance”.
Huge thanks to Spekkie3D for providing me with the STEP file. I have remixed he's left blank to be able to mount the powerbrick of the HP Elitedesk. Hopefully it's usefull to someone.
I removed part of the handle from the original to save on material and printing time. Does not affect functionality or cosmetic look of the original. No support needed Old handle no longer fits newer Alexes, had to modify the old handle.…
This version uses two, vertically oriented screw holes. This will allow you to mount it to wall studs behind drywall. I also added the DeWalt 20v XR text to the sides, and changed the upper gusset reinforcements to allow for the upper…
Note: This is for the newer Ender-3 printers with the U-shaped front Y idler bracket. Here's the mod for the older style with the flat/z-shaped front Y idler bracket. The original design placed the belt too close to the frame which caused…
Adapter for easier usage of Nosko, kid's nasal respirator
Bambu Lab Spoolholder Extension for AMS to use wide spools without removing the tube or cable of the AMS. Its compatible with the new spoolholder revision. Print instructions: 4 perimeters/walls 5 top/bottom layers 40% infil no supports…
Bin for the console, fits other years with the same console as well as the Dodge Hornet.
Adjustable fork for the newer Duplo excavator arms links. I recommend not printing it too heavy, since the excavator will tip over. I did 5 walls (0.4 width x 0.2 height) 20% infill and it was a little too heavy.
This is an accessory for newer model Dyson handheld vacuum cleaners. It has a short length and a 13.75 mm OD tip. Before printing verify the connection onto your Dyson model. For example it should include the two guiding rails on the side…
This carb to air filter holder boot is designed to be used with Honda CT90K1's that have incorporated a newer 2 screw carb with an intake opening of approximately 32mm. This has been printed with TPU which provides enough flexibility to…
This was a design for my brother. He goes wake surfing often and due to having a lot of people on the boat and new people learning, the fins get broken often. Being very expensive to replace we decided to try to make them. This is my go…
This is a negative volume model to use with all the great models for game inserts that were built for older 4x6 photo keeper cases. Easy to apply within the PrusaSlicer and 3D-Builder. As of 2024, all the available photo storage…
If you are looking for a safe storage solution for your NeoSaveMasta memory card for your Neo Geo, look no further! The NeoSaveKeepa was specifically designed to securely hold the NSM in place. The NeoSaveKeepa is ONLY compatible with…
fits to macbook apple silicon models, newer ones with a tick screen and notch on top, the ones that have M1/M2 model cpus.
Update, I have made a new version with an integrated holder for a bltouch inspired by Humanity_co, if you have already printed out the previous version then you will only need to print out the fan shroud clamp and a small adjustable mount…
Updated it to work on newer Centauri Carbon sensor mount design.
One time I was searching online for something to hold my headset, but I couldn't find anything that would either fit on my printer or was cost effective on filament. I came up with this design to attach to my adjustable Husky table for my…
Dad needed some plugs to keep dirt and debris out of his propane cylinders. I'm sharing both models. This one is for the newer propane bottles that have threads on the inside and outside. It's the same model, but this one was shortened to…
Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm , it is perfect for tight spaces and hard-to-reach corners. Key Features:…
This keychain holder is designed to fit the MagicBand+ which is the newer model that works with the sculptures at the Disney theme parks. Attach it to a keyring. For a really convenient option, attach the keyring to one of those…
This is a simple lightweight spool adapter for Polymaker cardboard spools, specifically the newer kind that has the holes spaced 120 degrees apart. It slots into the holes to provide a bit of a better fit. I've got a few variations…
Created some adaptors for Sunlu's Newer Filament Spools which have an inner diameter of 62mm.
The mount that comes with the doorbell screws into this wedge mount, and you can use the same Ring screws (although maybe they might need trimmed a bit). However, I used the Ring doorbell screws to attach the wedge to the wall, then used…
Mid Rise top with NO provisions for an LED cable. Split into sections so it can be printed on the CC. I also made the pins slightly larger and tightened up the tolerances so that no gluing is required. STEP files are attached so that you…
Low Rise top with NO provisions for an LED cable. Split into sections so it can be printed on the CC. STEP files are attached so that you can modify to your liking. Two sets of rear corners. One is ‘closed’ for a stationary top, and the…
An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place. This is a slight update…
A crevice tool for your Dyson. A short (126mm total height) and a long version (216mm total height) are provided. The OnShape model is available to copy & modify over here , it's almost fully parametric using variables so you can edit…
At some point in time, the Powerfix Wall mount pegboard changed the holes from squares to circles, and the square peg won't fit into the circular holes unless you trim the corners with side cutters. Since this isn't very elegant, I made…
I would recommend using PETG since I designed it for needing as little filament as possible. You need to print it twice, because it needs to be mounted on the front and the back of the rack. It's designed for racks with a depth of 200mm,…
Hello Everyone, I hope you are all doing well! I am happy to share with you all the complete model assembly of this sleek and compact travel case for your Philips Norelco Series 7000 and newer. This case will allow the user to store the…
This is the second version of my headset holder. One time I was searching online for something to hold my headset, but I couldn't find anything that would either fit on my printer or was cost effective on filament. I came up with this…
Modified the blank to include a 3.5 HDD caddy on the same rail, also incorporated a keystone slot for the HP G3 mini so an ethernet port can be on the front of the rack.
This remix adds a tiny cutout to the space for one of the dragon's feet. Some version of Wondrous Creatures have a slightly changed White Dragon that won't fit in the original Crew Box so I made a tiny change so both the old and new…
Newer R3 XL side filament sensor with reduced force (magnetic).
An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place.
The AMS portal Feet did not fit my AMS, so I resized parts to fit. It is an easy fit now. It is loose now, I may update it soon for a tighter fit, but it works perfect.
5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…
I did this remix because the design for the Ledberg sockets has changed a little bit. The fit is just right with this scale, however the male side leads might require some tinning or bending to make a proper contact with the leads on the…
tpu is best but anything except pla would be fine for heat resistance pla will melt in the hot cab during summer
I use a inline fabrication mount for my old(red base) and new Lee Pro 1000 presses. With the old style the mount came with a bracket to catch the finished rounds in a bin. With the new(silver base) pro 1000's they are lower and that same…
See OTHER bracket for download Update: 2 files have been merged into 1 as of 5-21-24 SV08 2020 Top Rail Adapter Bracket (ToolChanger) https://www.printables.com/model/887692-sv08-2020-top-rail-adapter-bracket-toolchanger T his is built…
CR-10S Standalone Mod for motherboard enclosure/housing Original parts are Support_Melzi.STL and Capot__Melzi.STL from: https://www.printables.com/model/392160-cr10-mod-standalone-stlstp The original CR-10 came with Creality Melzi branded…
I didn't like the normal green base to the Home Depot RBL lights and I wanted these to go to a 3/4" PVC for path lighting, so I designed this replacement base. This is for the lights that were sold this year at Home Depot, which are…
Holds a standard round hygrometer in the newer style PrintDry single spool container. Inspired by the original, but that doesn't fit the container that came with the latest PrintDry Pro system. Remodeled from scratch to need less in the…
Accounts for latest design changes on osoyoo 5" DSI Touch for Raspberry Pi Just a quick fix made in Tinkercad. So STL-only! Thanks for the original creation! Please also ccheckout my mount for Ender 3 (or other 20xX profiles). Best…
I designed this cover mainly due to how quickly the flat black color of the retractable mount became grungy looking. It’s also a fun way to add a little bit of color to the chair. This cover will work with the retractable joystick arm…
This is a base model useful for creating new Dyson accessories (V7 and newer vacuums). It provides a compliant mechanism for unclipping the accessory from the vacuum, which is a sealed away from the airflow. It's meant to be printed…
I made this box to replace the original Hazet boxes as they keep breaking at the latch and hinges. This is a toolset that is used by every technician in my field and most have broken with normal use. I made this box able to withstand…
USB-C Port offset 4mm
Center Mount LCD Case for newer "white board" ADIMLab Gantry machines. Probably does not fit older "black board" machines, but don't have one to test. This case is useful when you desire to locate your LCD screen in the middle of the…
This would be good if scaled up for a automated pet door. Wifi and bluetooth are available on the board. You could easily set up a message to your phone are Nodered to notify of movement. I've had a Squirrelinator trap for about 6 months…
Third Gen Toyota Tundra (2022 or Newer) Hands Free Expanding Phone Holder. This is admittedly a large print and will use significant material. I have not optimized this print at all. Requirements: High Temp Materials. Rubber Bands. Using…
Standard Voron PIF settings. I printed it with eSun ABS+.
BitKit Arcade PCB enclosure (remix for newer red PCB) This is based on the model by twistedsymphony, however he designed his enclosure for the older version of the BitKit (green PCB). The new version doesnt need a hole for USB and also…
Modified JascnC's original file to work with newer light verisons where there is only 1 screw hole.
This is my first 3d stl design/remix I'm posting. Just bought a 2022 Ford F-150, and the front passenger cup holders prevented my current 3D printed Yeti handles from working because they were too long and prevented the cup from firmly…
Note: GE has at least two versions of 5' canes. Canes I bought in 2025 are skinnier. These mounts are for the newer skinnier 5' Cane. I have another mount posted for the wider cane. The skinnier canes are about 167mm wide. A EMT mount for…
I bought the GLH-S-2800 in summer 2025 but unfortunately, they changed the design slightly… Otherwise, I followed the instructions of the original by 3DTom I got a stainless steel sheet cut into dimensions and screws for €5 at pro kilo…
Dash mount for portable devices for VW Golf. I have only tested it on my 2024 MK8 Golf R. I believe it will work for other recent models of VW Golf. It requires no gluing and is totally non destructive. I designed it for a swivel mount…
the thing that connects to the motor will need you to push it in abit.
My vacuum is 40+ years old, so the filter supply is nearly obsolete and more costly when found. I adapted a newer VF400 / VF500 style 5-20 gallon filter. The printed part is very simple, just a spacer. I did this a long time ago and as I…
This specific Haughton Elevator Company emblem was used as a small hatch covering the emergency brake release keyhole on traction elevators installed in the 1960s. The design allows for flexibility when printing, although I suggest doing…
5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…
Nozzle for Dyson V8 and Newer Models – 110 mm x 10 mm This thin nozzle is designed to fit Dyson V8 and newer models. With a width of 110 mm and a thickness of 10 mm , it is perfect for tight spaces and hard-to-reach corners. Key Features:…
This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…
Print approx. €1.53–€1.87 excl. taxPreliminary estimate for one variant
Third Gen Toyota Tundra (2022 or Newer) Hands Free Expanding Phone Holder. This is admittedly a large print and will use significant material. I have not optimized this print at all. Requirements: High Temp Materials. Rubber Bands. Using…
Dash mount for portable devices for VW Golf. I have only tested it on my 2024 MK8 Golf R. I believe it will work for other recent models of VW Golf. It requires no gluing and is totally non destructive. I designed it for a swivel mount…
This specific Haughton Elevator Company emblem was used as a small hatch covering the emergency brake release keyhole on traction elevators installed in the 1960s. The design allows for flexibility when printing, although I suggest doing…
I removed part of the handle from the original to save on material and printing time. Does not affect functionality or cosmetic look of the original. No support needed Old handle no longer fits newer Alexes, had to modify the old handle.…
Tuned profile for printing with Fiberflex 40D filament. Optimized for use with supports, HQ surface finish and multiple parts printed at once. Out of the box, you get a little bit of stringing, and also great finish and flat seams. Below…
I found out the hardway there are about 2-3 different versions of the SV226 Filter Drawer. This is for the newer ~2026 version that is designed specifically for M54. The thinner one is the one I remixed. Magnet hole is about 6mm x 1.7mm
![Phone Mount for VanMoof S2/S3 [Legacy, newer version linked in description]](https://media.printables.com/media/prints/41892/images/418608_27bb6a0e-767c-4f68-becf-206b6da75dc2/vanmoof_s2_smartphone_mount_2020-oct-02_09-28-49a.png)
