Counting matching models…
Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Overengineered rear lens cap for Canon EOS RF lenses. Missing the align notch and stopper. Print instructions Print .1 or 0.2 mm P.S. Donations welcome, my cat keeps chomping the filament.
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Manabun design is very accurate. I made quick remix for non-slip pads that I have at home. Dimensions 18 x 5 mm. Pads are very tight in holes. Print with 3 perimeters and 15 % lightning infill.
Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant
This is a tiny keychain cannon, ready to help you both in the office and at home. It has a spring to shoot cannon balls. Use the hinge to aim precisely. The cannon base holds one cannon ball securely in place, even if you toss it around…
Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant
Motivation I have a Laser Cutter and AC Infinity 6” Inline Duct Fan requiring an adapter to reduce the 6” fan inlet to the 4” ducting from the laser. Initially, I purchased the AC Infinity Duct Adapter, 6” to 4” Ducting Reducer , but as…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Slide duplicator for Canon lens with a reverse ring. It can transfert 24x36mm slides on a 50x50mm frame. I use it on my Canon 50mm f/1.8 EF lens. For the assembly, you'll need: 6 M3x8 bolts + nuts 1 or 2 M3x10 bolts + female threaded…
Print approx. €10.00–€12.23 excl. taxPreliminary estimate for one variant
The default hopper that comes with the Eureka Mignon grinder is quite big and badly designed for single dose grinding. This hopper fits snuggly in the enclosure. It's also one of my first prints, so any improvements are welcomed. I'll…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant
Upload of my project from thingiverse since thingiverse has become trash! Want to try non-planar printing but don't want to remove the fans from your printer or bother setting up Slic3r Non-Planar. Try this! Using 60c bed temp and 200c…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Canon LP-E17 Battery Charger LC-E17E Base This base snugly fits to your canon battery charger LC-E17E, and provides clear slots for charged and dead batteries. You'll never get caught without a charged battery again! Simply store your…
Print approx. €12.40–€15.15 excl. taxPreliminary estimate for one variant
The first in the Japanese Elemental Oni series - see also TyphoOni (Water) , OniKaze (Air, Wind) , Little Sakura , Little Coral , Little Bramble Meet the InfernOni About 4.5 inches (113mm tall) - Can be sized bigger or smaller. Created…
Print approx. €2.87–€3.50 excl. taxPreliminary estimate for one variant
I didn't like how the drawers fell right out. I'd prefer some catch, and since the top goes on separately, it's a perfect opportunity to do something like this! Version 2: The one where I actually apply volumes and remove the duplicate…
Print approx. €1.40–€1.72 excl. taxPreliminary estimate for one variant
For a small video production with a telephoto lens on the Canon R (on a tripod), I needed an adapter for the DJI Osmo Pocket to be able to film the wide shot at the same time. I found a solution on Cults3D at User “ 3D-Designs” , which…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Voici un modèle 3D représentant un hérisson stylisé, avec des détails soignés pour capturer la beauté de cet animal sauvage. Parfait pour les amoureux de la faune ou comme décoration intérieure naturelle. Ce modèle peut être imprimé en…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
About I needed non-stackable version of Stackable SSD Case for Intel NUC , so I remixed it: this was designed and tested for D34010WYK model only much easier to mount SSD disk reuse original bottom part with the rubber feet - also cutouts…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
It prevents the fork and the portafilter from scratches. It simply klicks in place, sometimes a bit firm, so it can‘t fall off. Suggest to print in PETG, so it wouldn‘t deform with your preheated portafilter. It‘s also printable in TPU to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
Auch die allerbeste Kaffeemühle ist hin und wieder inkontinent und verstreut Reste des Kaffeemehls in ihrer Umgebung. Seit ich diese Fangschale davor platziert habe, klappt die Reinigung mit einem Handgriff. Das Teil habe ich in einfachem…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for one variant
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
************************************************************************************************** See this YouTube video by Nils Rasmusson ( https://www.thingiverse.com/the3dprintingzone/designs ) for a performance comparison of this…
A fully parametric polygon fidget. Printing tips: Decrease the printing speed Decrease the cooling fan's speed For a robust handle use 3 walls Ensure a good bed adhesion How to customize your own? You will need to download FreeCAD , a…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Powerful printable foam dart blaster capable of up to 250FPS. See the demo video below! Technically all…
I recently came across another Creality owner that had noticed his gantry was off axis, this will off course cause some serious layer shifting on bigger prints. Upon checking myself (I used the PEI sheet that comes along with the printer…
A quick and simple remix, but one I just had to make after seeing the All-Terrain Assault Benchy. Now Dummy 13 can have shoulder-mounted cannons, too! Two versions: one with the 13 on the backpack, one without (there's a 13 on the cannons…
See this YouTube video by Nils Rasmusson https://www.thingiverse.com/the3dprintingzone/designs for a performance comparison of this blast gate with other commercially available designs…
Update 07 Apr 24 A truncated version of this style and size of blast gate is now available (Print 835725) Update 06 Apr 24 Uploaded 63mm to 50mm adapter. The 63mm end sleeves outside the ball valve exit/entry tube (1.5mm taper), the 50mm…
Update 01Sep20 I have an alternative design of blast gate that may be better suited to extraction of larger chips and shavings. 63mm (2½") ball valve: print 137795 A 100mm (4") ball valve: print 137794 This is a 100mm (or 4 inch) version…
********** Update: Completely reworked the 3MF files: - Newly defined print speed management saves about 40 hours of printing time. - Printer type is still set to Prusa Mk3 - if you want to change the printer type, please first inspect…
Power Cannon for GraviTrax by uhltimate This is my Gravitrax compatible "Power Cannon". It is easy to reload and has more power to gain height. You can print it without using supports. There a two different designs. Power-Cannon, same…
This traps a mouse inside and locks them in. Assembly It's pretty straight forward. First, put the lever platform inside of the main box. The thick end should be towards the opening. You will have to bend the side walls of the box…
This is a cover for canons LP-E17 batteries. It should fit batteries for EOS RP EOS M6 Mark II EOS 850D EOS 250D EOS 200D EOS M6 EOS M3 EOS 760D EOS M5 EOS 750D EOS 800D EOS 77D Please see also my GoPro 9 or 10 batterie cover .
Canon Lens Hood designed for a cheap Replacement for ET-74B REPLACEMENT FOR : ET-75B https://www.amazon.com/-/en/LH-74B/dp/B06XSJ3FT4 PROOFED TO BE COMPATIBLE WITH: RF 100-400mm F5.6-8 is USM…
A plaque for the Autocannon support weapon
A plaque for the Orbital Railcannon Strike UPDATE 3/4/24: Added STL files UPDATE 3/5/2024: Added V2 files that includes some fixes for misc. symmetry and centering of objects, as well as updates to the stratagem model itself to be more…
A lens hood for Canon RF 100-400mm F5.6-8 IS USM. It's length is 60 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap. For best print quality, I advice…
Perfect and secure fit. Correct focal length. Easy to print. Supports are only needed for "Canon side" clips. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 25% Filament:…
Canon RF 35mm f/1.8 Macro IS STM Lens Hood. Two styles. Full and tulip. • Snaps on and holds tight. • Reversible so you can store backwards on lens. • Access tabs on either side in case you need help removing. I suggest using a soft…
This is a remix from the fantastic design: https://www.printables.com/model/718547-playmobil-cannon For this model you need the following Materials: pen spring m3x30 screw m3 nut super glue
A simple adapter to adapt Canon FL/FD mount lenses to a Canon RF Camera. Has the correct flange focal distance correction (22mm difference between FD and RF) and alignment marks for easy installation (the picture shows a slightly old…
I created a two fictional or alternative types of models of Panzerjäger Tiger (P) Ferdinand (Sd.Kfz.184) mit Krupp Maus II Turm mit 150 mm Kampfwagenkanone KwK 44 L38 in size - scale 1:100 for model makers to the dioramats or like a model…
This ring fits directly on your stock dial like this ring for the first version. The advantage is a smoother dialing experience since you dont have a 3D-printed thread. to tighten up, i used a M3x6 screw, but it still sticks out. you can…
Prodávané krytky konektoru D-SUB nepříjemně trčí do prostoru. Jsou tedy zranitelné, můžou se vylomit a zabírají prostor. Pokud nepotřebujeme upevňovací kabelovou svorku, může se krytka podstatně zmenšit. Tím odpadá i potřeba upevňovacích…
These two objects are non-marring feet or tip attachments that are placed on the tip of the Central Pneumatic 2-in-1 pneumatic air 18 Gauge stapler/brad nailer (SKU 68019, 61661, 63156 & 64269) and the Banks 18 Gauge Air Brad Nailer (SKU…
I elevated the areas that need to be white so that you can preform a color change at that layer. Printed well with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red: Layers 23-45 White: Layers 46-48
This diffuser clips on to the front of your Canon MT-24EX flashheads and provides a large, evenly illuminated 175x120mm rectangular front face (~7x5 inches). The shape of the face has been chosen so that the MT-24EX's natural beam pattern…
A handy component storage / hobby box with a hinged lid and clasps to keep it shut. Featuring a removable tray which when in place and the lid closed, prevents spillage of items between compartments (as long as the items are bigger than…
after 8h of printing i saw that 2 parts havent enough Adhesion, so i added a hardcoded brim like in the orgiginal files from Popandsicle
Pirate cannoneer minifigure equipped with hand cannon in shape of hog. Designed to print without supports on an FDM printer. I used 0,2 nozzle and 0,8 mm layer height. If you want to support me and get access to my weekly posts, please…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I elevated the areas that need to be white so that you can preform a color change at that layer. I Printed the 500KG Bomb remix I did (same thing just different plaque) with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red:…
🇬🇧 Small MOLLE Clip – Servant of Freedom (Helldivers Inspired) A small MOLLE clip I designed for my airsoft gear, inspired by the Servant of Freedom player title from Helldivers . Dimensions: 60 × 32.5 × 3 mm (MMU/AMS version) Non-MMU…
Customize or simply replace your Framework logo. Removing the original logo is easy with some heat (heatgun, airdryer, ifixit style heat pouch, etc.) and a plastic (don't scratch the cover) prying tool. The original logo is some kind of…
This is a 3D-printable drill adapter for Hammer / Felder machine adjustment hand wheels. It fits over the adjustment handwheel (also called the table lift wheel, hand crank or dial) and allows you to quickly adjust the machine using a…
🇬🇧 Small MOLLE Clip – Eagle 500kg bomb (Inspired by Helldivers) This is a small MOLLE clip I designed for my airsoft gear, inspired by the Eagle 500kg stratagem from Helldivers . Dimensions: MMU/AMS version: 45 × 35 × 4 mm Non-MMU…
This is a drilling depth stop with a basket rotating on a thrust bearing, thanks to which it leaves no trace on the wood's surface. The basket has large openings, so the chips don't clog the drill bit's flutes. I've first seen this design…
Este adaptador foi usado como alternativa temporária às caras porcas M5 para perfis 2020 disponíveis no Brasil. Infelizmente as porcas M5 para perfis 2020 disponíveis em lojas chinesas e americanas (padrão europeu) não funcionam neste…
*Notice: For anyone that downloaded the model before Dec 20, 2023, I made a recent update to the catch clips that makes them grab onto the bearing better when they are pushed out of the hub. I was NOT quite pleased with how little force…
Mod of fan duck to fit sunon drives and use 8th driver in octopus.
Adapter for old Tamron Adaptall 2 lenses to be mounted in new canon EOS DSLR. Tested with two lenses. The adapter is keeping the aperture lever pressed, so you have to dial and keep the aperture on the aperture ring. No electronics.…
Parthenon 1:100 Scale Model - Corner Section This is a scale model of the front left corner section of the Parthenon, modelled precisely to known dimensions from various archaeological studies of the original. It consists of the crepidoma…
Nine sides, no sharp points, and a twist that keeps passing through. This one is a fun fidget and a straightforward print. It has nine edges, and I smoothed them all down for a better, smoother look. The modern shape and extremely rounded…
These are an alternate version of my openGrid Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in multiconnect…
These are an alternate version of my openGrid Lite Multiconnect Snaps , using a non-rotating multiconnect instead of the standard round connector. The openGrid models included Multiconnect snaps with a threaded snap and a screw-in…
The photos of the finalized print were taken prior to adjusting the tolerances, so quality and fit may vary. I will include the original STLs from the model I remixed; however, I caution against using them as-is since their orientation…
Print instructions: Layer height: 0.1 mm Speed: 30 - 50 mm/s Supports: on Material: Preferably black PETG/ABS/ASA, otherwise paint the inside black There are printed threads, ensure your printer and filament are well calibrated.
A simple camera ring that replaces the one that comes with the camera (original part name is RAK-DC2) Prints without support if model is flipped upside-down. My settings for Bambulab: Quality: Wall generator: Arachne Strength: Wall loops:…
Ladies and gentlemen. Standing in the right corner of the ring weighing in at a solid 240g* Shooting up to speeds of 150fps,** and using ANY, yes ANY, form of ammunition in the game! We have the CLARKISON XL! Capable at smashing through…
I created this filter adapter because I recently converted my old Canon G12 to view full spectrum light (using this tutorial: https://www.lifepixel.com/tutorials/infrared-diy-tutorials/canon-powershot-g12-ir ) I did not want to fully…
i love game called "REDCON" so i designed a cannon from that game, i plan on designing a soldier for it soon
Enhance the security of your valuable camera with this little 3D-printable tool. Designed to mimic a Chinese knockoff battery, it provides a discreet and effective way to prevent camera theft. With its built-in Apple AirTag integration,…
Designed in fusion 360. Files are in proper printing position. Print all one color with the full assembly file or print both arms and press pin separate for 2 different colors. Pin is a press fit so ensure proper position then hammer…
3D printed weighing scale with several attractive features such as More sensitive for light payloads (2g/div) Max 500g payload Tare function (subtraction of the weight of containers) No spring Easy to calibrate Maximum part size : 126(W)…
This is a diffuser for an Inon Z330 underwater strobe. This can be printed with tinted filament to create colored filter effects. See more on this on my blog at https://www.divetech.com/post/shooting-with-light-and-filters I printed these…
I elevated the areas that need to be white so that you can preform a color change at that layer. I Printed the 500KG Bomb remix I did (same thing just different plaque) with my Ender 3 V2. With a .2 layer height Black: Layers 1-22 Red:…
The original grip pad for my automatic center punch started to slip, so I created this replacement. The new shape features a larger contact surface and is printed with FuzzySkin to ensure a significantly better grip. Print Specifications…
5,25" Floppy Drive Lever for Chinon FR-506.
This custom 3D-printable Canon camera lens cap is designed to provide reliable protection for your lens while offering a practical and lightweight alternative to factory caps. Designed as close to the orginal as possible, it features a…
Steadfast support of our regime is how humankind will reign supreme… Decorated Hero Keychain for those who fight with honor and never back down. General Print Instructions: Material: PETG is highly recommended - PLA may warp during hot…
Miniature of the dagger from Princess Mononoke Materials Printed components, red paint for details on blade, and red thread for handle. Assembly Printing and gluing together the half model gave me the best finish with no support surface.…
Just a fan work and a realization of an old dream I had when I was a kid to build a big 'ol army of spacefaring space nuns from 40k in the future. These sisters love battle, that's for sure! Seemed like most of the Adepta ladies you can…
Modeled after the Express 1M2 NVME TB4 enclosure by Other World Computing. It sold as an empty enclosure and also a complete storage drive from factory. I did not design this product, OWC did, hence the restrictive license and not being…
This is a very simple model to help visualize the so-called “fuzzy-sharp phenomenon” associated with solar eclipses. The shape is taken from this Smarter Everyday video where they explain how it works and how to use this tool. This was…
A sphericon is a funky-looking, smooth, and wobbly shape that’s kind of like a mix between a ball and a weird rolling polygon. If you cut a polygon in half, flip one of the halves, and glue them back together, you get the base shape of a…
This is a Canon RF adapter for small Takahashi refractor telescopes with or without focal reducers. It works on the reducer/flatteners of the FS-60C and the Sky90 which present a M56x0.75 external thread and require a 72mm metal-back…
I designed this adapter ring to allow me to mount my Godox MF12 macro flashguns to my Canon MP-E 65mm macro lens. This lens has no filter thread, so there is no out-of-the-box way of attaching the thread-mounted MF12 mounting ring to the…
this is a firework cannon which can shoot a piece of plastic ammo. this is only for outdoors. just take a mini red firecracker or it can be called mini dynamite. if you can't find it you can use something with a width of a 7mm-7.4mm. does…
During a partial solar eclipse (or the partial phases before and after a total solar eclipse) certain phenomena can be observed using this tool. Print this shape and hold it in direct sunshine where the shadow is cast onto the ground or…
CannonCore motor to GT rails adapters. Optionally with fins! Cutting Instructions Send to your CNC shop of choice for a pair of these Be sure to include threads! (Technical drawing is in the files) ??? Profit
Easy and convenient power input for the bambulabs P1S (or other compatible machines). This allows you to externally power devices such as a bento box without any permanent non removable modifications to the machine! You will need some…
Mia versione del ricambio collare. Causa rottura mio Canon 600mm f/4 l is. Dopo aver chiamato l'assistenza e non avendomi fornito supporto ho deciso di mia iniziativa di creare questo ricambio. La finestrella che vedete in progetto è…
Print in ASA PETG 0.16/0.2mm layer height Support needed You can find this nozzles at : https://www.nonplanar.xyz/nozzles
My daughter very like push every buttons. This guard can protect power button on my Denon receiver. Optimized for 0,12mm layer
Number 4!!! This was not something I even figured I would make. I just found out the Nikkor SW 65mm has a Flange distance of 70mm. So here we go it worked. It's funny to see a Nikon lens on a Canon body. I'm not 100% happy with this one…
This listing is my entry in the flash-contest “Single Extruder - Dual Color” . If you download this please help me in this contest my giving this like & perhaps even “make”-picture. /Cheers! Originally I made this in swedish (hence the…
Replaces the restricted magazine plug for the winchester 1300 shotgun Some magazine tubes only fits 3 shotgun shells because they've been restricted with a longer magazine plug required by law in some instances. This plug is mainly for…
Just print it laying flat and you should be fine. You can scale the modell if you want Have fun printing :D
adds a replaceable hand variant to the Duck Mecha: DK-01 Loader
A larger adjustment knob for the Eureka Mignon Zero that is easier to read and far more precise and repeatable than the stock knob. Printable without AMS via manual filament changes. This remixed version has wider tick marks and numbers…
If it doesn't fit perfectly, try scaling it down in very small increments.
