Counting matching models…
Edit: Added the 3mf file/profile on 5/8/2026 for printing the Siraya Tech PEBA with this model. The only difference is a nozzle temperature of 245C, and a Z-distance of 0.35mm. It uses the same model as the SainSmart PEBA. This is our new…
UPDATE: The main spacers were missing from the file list and have now been added. The hole in the hand crank has been adjusted to fit the input shaft. This is my rendition of a “constant mesh” 4 speed manual transmission gearbox. A…
************************************************************************************************** These transmissions are intended for use with “Thumper” and “Morrigan” 1:8 scale models. Thumper -…
!!!!!! It has come to my attention that not all 40T gears are the same. Some have a much bigger shoulder and are much thicker. I got mine on Amazon. link below. The wrong 40T has an option of a shaft up to 15mm, The cheaper version only…
Profile for Sainsmart TPU that I use mainly for fpv drones. My Bambulab P1P has hardened steel nozzle and gears and aux part cooling fan. Is usable on all Bambulab printers though. I've printed a lot of colors and models. Enjoy :)
This thing is a protection and mounting case for the popular 8-channel relay boards commonly sold under the SainSmart and Kootek names and by various eBay sellers. The opening in the top of the case helps dissipate heat generated by the…
Welcome to the 3D Printed Manual Transmission Model project! This project provides the design files and instructions to create a fully functional model of a manual transmission using 3D printing. The model demonstrates the inner workings…
My idea was to better understand how a manual transmission works by actually building a model of one. My model has 5 gears and a large cutout to better understand the inner workings of a transmission. Additional requirements for assembly:…
This is a remix of @LL77's gunsmith bench block, inspired by M*Carbo's gunsmith bench block. I haven't printed this yet, but it should probably be printed with >3 walls, >30% infill, >3 top and bottom layers. I want to tinker with this…
This is a slightly tweaked profile for use with Sainsmart's 92A TPU. This filament needs lower temperatures which is the primary difference. I found this to have better results than the manufacturer settings.
This model is probably difficult to assemble, so take your time. The better you understand automatic transmissions, the easier the assembly process will be. I was always interested in how automatic and manual transmissions worked, this is…
Included in this mini-collection: work holding and cable management. For the work holding, the flat Genmitsu workplate has a set of M6 holes set at an unusual spacing pattern, 54mm X and 42.5mm Y. All clamps accept an M6 machine bolt with…
This is a pistol-style RC transmitter based on Arduino . It was created as a simple and budget-friendly alternative to commercial transmitters. It covers the basics and works well for controlling cars, boats, or other models where you…
Battery covers are one of the easiest things to lose, and no one wants to order a new one and wait a couple of days to receive it. Now you can replace your backplate in under 30 minutes! Print Settings: Resolution: .15mm Supports: Yes…
So you bought a brand new electric vehicle, but something feels missing? Worry no more, as this model brings the satisfying experience of a manual shifter back in your car. Printed without supports, this model fits into your car cupholder…
Last changed : 18-07-2026 Simple model of the E-CVT used by Toyota and Ford in their vehicles, for example the Toyota Prius and Ford Maverick. This transmission uses a planetary gear set combined with electric motors to achieve an…
This design is inspired by the Fox Belly created by the Artful Dodgers. It shifts the location of the Element StealthX transmission to be as low as possible and replaces the stock skid plate with a flat plate to help with breaking over…
See https://www.playingwithfusion.com/ for more information, or see assembly instructions on Instructables here .
2x6 color swatch for more transparent filament. Print it with first layer height 0.16 layer height 0.08 Top layer: Aligned Rectilinear 100% infill swap filament at layer 12 / 1.04mm 2 versions. one with extra 1.75 bump at the top corner…
This was my favorite manual trans that I could find online, to 3D print. But it isn't the smoothest. The crank was just a square, so the clutches rotate with it. Bu t the round holes for the output gears, through a square peg, made it…
Please note that using a belt drive first stage in place of gears will reverse the rotation of your wheels. You must either swap gears in your transmission or reprogram your ESC to correct this EDITS: 1/26/24: Added multi-body STL for the…
3D print your own Transmission Electron Microscope (TEM) ! This model is designed for FDM printing, but probably works okay on SLA printers with some smart placement on the buildplate. ✨ Features : The microscope column opens up to reveal…
Porsche Boxster 987 convertible top transmission worm gears occasionally break due to age and/or excessive strain due to malfunctions. I have designed a replacement. Left and right gears are slightly different. Mirroring one gear in the…
Chevy GMC GM transmission gear shift pointer indicator part No: "7840995" It may also fit other vehicles with the same style pointer The gear pointer broke when I was replacing the lightbulb for the indicator, a new one cost $60, so I…
A while back a friend gave me a bench block that was 3d printed it broke so I made my own version used 3 Shells and 20% infill 4 holes 3/4"(19.05mm)- 5/8"(15.875mm)- 1/4"(6.35mm) - 3/16" 1 Cut 1/4" (6.35mm) x 1"(25mm) 1"(25mm) Height…
This is a part of a bigger project and mounts on my other model (the gearbox) and should drive a differential gearbox (yet to come). A dual coupling is needed when you want to link 2 rotating shafts, even if they are supposed to be…
This model is compatible with the lego system.
Remix of the transmitter box from Shaladdin's awesome Wireless powered BentoBox (remixed from thrutheframe's BentoBox Air Purifier for X1C). My version of the X1 Carbon (received April '23) has an extended edge which prevents installation…
This is a t-slot nut designed to work the the Sainsmart 3018-pro desktop router. It should fit the channels on the extruded aluminum bed. I will use it with the “ 3018 CNC workpiece clamp " by dekaware . First iteration was too tight…
Update: Version 3 uploaded. For user request I have added 2 more screws at the arms to base connection, and enforced a little bit the arms. Setting the nuts in the slot for the lower screw will need patient.:) I have not printed this…
This is a simple, clip-on Z Probe holder for the Genmitsu 4040 Pro CNC Router. Has a post to wind the wire and a nub to hold the alligator clip, while securing the wire. Should import in the correct orientation, on its side. There is…
This is a CNC spoilboard I coded after looking at a few designs around the web. I wrote it for my SainSmart CNC 3018 ProVER with the Y extension (3040). If you have this machine, this may work for you, but check that the measurements are…
For more information,check: https://www.youtube.com/watch?v=R-8KaH3Uyrw&t=1s Print instructions Category: Audio Summary For more information,check: https://www.youtube.com/watch?v=R-8KaH3Uyrw&t=1s Print Settings Printer Brand: TEVO…
3D MODEL DESCRIPTION I want to implement automatic transmission on my own RC car, so I created this gearset, just better visuallization and learn how it's work. I included f3d project file, It's not good organising, I've just started…
Material: 550g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P2, P3 Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
This model is compatible with the lego system.
These are the SVG to STL conversions of the amazing Arkham Horror LCG Standees created by Yves Tourigny, uploaded with the artists permission. To find the original SVG files and loads of other amazing work, please visit…
I created a Gamepad RC Controller. The entire build is made of PLA. It is powered by single Li-ion 18650 battery. There are just three types of screws holding it together, which simplifies assembly and maintenance. This controller is not…
This nozzle is meant to thread into the bottom of the transmission oil pan on VW 6spd automatic transmissions. (My car is 2010 VW Golf 2.5 Auto. I was doing a fluid flush on the transmission in my garage and didnt realize I needed a…
Introducing the q-tip stick end for an FPV transmitter. The hole is self threading on an M3 bolt. I can create other sizes if anyone asks. I liked this particular stick end since I'm a bit of a hybrid user. Notes: Don't over tighten, it…
Modified Rack1 and Rack2 so the steer bar stays in.
No support needed. ENJOY!
Made a case for my ESP8285 ESP-01M IR Infrared Transmitter Module that I use as remote for my TV with Home Assistant I used ESPHome remote transmitter https://esphome.io/components/remote_transmitter.html with the IR remote codes from…
This is a spoil bed holder for a bolt pattern centered 20mm past the end of the bed. Re-uses the M6x45 hex bolts from the garbage Genmitsu work holders that came with my 3018-pro kit…
Housing for an FPV camera incl. transmitter and battery. If you don't have a drone handy, the unit is straightforward to get a camera image from the air. The duration of use can be longer with an e-sailplane model than with a drone. So…
This will go times 2 in my RC 4WD design (in progress) but it also drives (partly) of the overall design size. So I decided to streamline a little bit. I was able to design a print in place part (much shorter) but prone to breaking (!) So…
Rack(s) for holding the Xvive U4 In Ear System Transmitters (with cable routing channels for all models). I used some scotch tape to keep the cables in their channels, then mounted with command strips. I’ve included ready to go STL’s for…
Static Mixer for Injection Mortar Statik-Mischer für Injektionsmörtel Compatible with fischer FIS cartridges. Includes mixer, nozzle and cap. Printing Print upright as provided, no supports. 0.2mm layer height is fine. Mixer and nozzle…
Designed in OpenSCAD for the laser linked below: https://www.sainsmart.com/collections/laser-cutting/products/genmitsu-cnc-blue-violet-light-fixed-focus-laser-module-kit-for-3018-prover-3018-mx3 Air hose connector designed for the…
For some insane reason, I decided to dive into the world of DIY drones by building my own transmitter and some would say the results were catastrophic. In the end, I learned a lot in the process and did successfully build a drone…
RC car transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for all rc car transmitters, it may fit other transmitters, but not guaranteed. I made another model, for…
This model is compatible with the lego system.
This is an Transmission 3 speeds extension for the Ford FlatHead V8 ( https://www.thingiverse.com/thing:2537602 ). It's a complex remix of "1939 Ford Toploader Transmission by skipstitch" ( https://www.thingiverse.com/thing:2940612 ). It…
This transmitter tray is designed specifically for the Radiomaster TX16S with a folding handle. All parts were printed in PETG for outdoor use: Satin sheet and Kores application 0.4mm nozzle 240C nozzle temp 90C bed temp 15% infill…
When the gearbox is reassembled rotate the drive wheel in reverse until it's in the neutral position on both sides before installing. So that they synchronize and it doesn't just go in circles.
Update 2025: I just uploaded a Version 2 of these and the Step file if anyone wants to make changes to them. Update: Just added some alternative feet for those that would like to angle the speakers back, also added 2 mock-up 3D files so…
This file contains the STL files for printing a scale model of the Ford 351 Cleveland engine for use as either a standalone model or replacement engine for a 1/24th scale model. Note that if you want 1/25th scale, use your slicer to…
Fun little desk car with transmission for both wheels. If you print 2 then the gears all mesh nicely. Remix Info I played with radim3D's fidget on my desk for quite a while before thinking what it really needed was another big wheel so it…
Transmitter Tray FLYSKY i6 or TURNIGY i6 by GeorgeXib on Thingiverse: https://www.thingiverse.com/thing:2655235
This is a simple CVT (Continuously Variable Transmission) model that demonstrates the concept behind a CVT. It represents a less common and simplified version of those found in many automatic transmission vehicles. It uses no gears and is…
Just a wall hanger to keep things organized. Print in PLA without supports.
The DoorHan Transmitter 2 Pro key fob I use for my garage door has buttons that are easy to press by mistake, as they have low resistance and are in line with the top surface. I designed snap-on cover to hide the buttons a bit, so they…
We have a house elf we call Dobby. It's our Easystar FC8800 robot vacuum cleaner. One day one of the sweeping brushes stopped turning because the plastic worm gear on the stepper motor had worn out and wasn't catching on the teeth of the…
Update: R2 version has an arrow pointing in the direction to move the tool to reach Neutral (N). This model is a tool to manually release the park pawl on a ZF 9HP transmission, used on 2020 or newer Honda Ridgelines. A ½ inch ball valve…
Arduino NRF24L01-Based 10-Channel RC Transmitter – 3D Printed Case 🔧 Project Overview: A custom 10-channel RC transmitter designed using the Arduino Nano and nRF24L01 wireless module. It includes support for dual joysticks,…
This is a custom design! It is meant to replace the original using the original hardware. It should fit, but it is different than the original. It is thicker, and should be a better 3D Printed part than if I had tried to make an exact…
Modifications to 3DSets Landy Wagon (and other 3DSets models) to go to metal transmission from gearbox to wheel, using Thumper axles Use in combination with Gearbox with 3D Printed pulley and Metal output GT2/Metal pulleys gearbox UPDATE…
A wedge to raise the motor up away from the rails when using a HobbyWing Fusion with GSpeed skid plate and chassis rails. The opo named files tilt the transmission side to side while the other files tilt the transmission front to back.…
Mount to attach DJI Mic receiver and transmitter to a Canon EOS R. Instead of using my big Videomic Pro+. This way, you can also use the DJI Mic while using a gimbal (in my case a Zhiyun Weebill Lab). V2 has a slightly smaller hotshoe…
Modeled this SCX10.2 flat skid to install a Vanquish VFD transmission basically as far forward as possible. Used this along with the Xtra Cab trays I also uploaded. Certain bodies may require some modifications to the body and/or the…
I frequently upgrade 3D printers so why not improve a small CNC router? Through these upgrades you will: Switch to a higher power and RPM Dremel 3000. It improves the performance of the router and still still be removed to use by hand.…
This is a print-in-place tool allowing you to manually place in neutral the ZF 9HP transmission (found on the G2 Honda Ridgeline and on some years of the Honda Pilot as well as other makes) when the vehicle will not start. The ZF 9HP…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
SIDIO Compatible Crate (stacking) 12.5x18.5x11in (without separators or draft) Let's be real, no one is being organized with tiny 3D printed containers. We need large format organizational systems, in particular for manned mars…
Bring high-voltage realism to your railway layouts, dioramas, miniature power networks, and engineering displays with this highly detailed 1:100 Scale 400 kV Double-Circuit Steel Lattice Overhead Line Tower . Designed to represent large…
printed in PLA, probably could be printed in TPU as well. Try printing without support.
TQI Transmitter wall mount (holder) for mounting via screw or sticky tape RC transmitter to the wall for storage. This is sized for Traxxas TQI transmitter, it may fit other transmitters, but not guaranteed. I made another model, for…
I designed some fancy switch sleeves for my Taranis QX7. I suspect that they'll fit the X9D and most other radios. Must be printed in a flexible filament. Inspired by these silicone doo-dads: Slicone Transmitter Anti-slipping Stick Switch…
Wall mount for Spektrum SLT2 RC car transmitters, that come with lots of Arrma RC cars, e.g. Gorgon, Granite Mega, Fury, Vorteks, Grom series, ... Might also work with similar transmitters from other brands, but not tested. For mounting…
This model widens one side of the spool ring adapter to stabilize a SAINSMART 1kg 198x60mm cardboard spool while it rotates within a Bambu Lab AMS. Features: Reusable SAINSMART nameplate for easy identification when reusing Instructions:…
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
Wall mount for quadcopters/drones. Suitable for most 3"-5" frames and even a transmitter. The transmitter one is slightly narrower for a Taranis but would probably fit most models. OpenSCAD files included so you can modify it to suit your…
I am doing an LS1 ZF8HP70 swap into a BMW E39 and wanted a mock up motor and trans to make initial test fitting a lot easier. Refer to my other models for the LS1. I found a good quality 4WD trans scan and some partial scan data of a 2WD…
My daughter (8) has quite small hands for her rc car transmitter (spektrum dx3). This makes it really hard for her to reach reverse by just stretching her finger as there is such a large gap in the trigger. This buffer removes the space…
Material: 430g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P3a, P3b Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
Case for KY-008 Laser transmitter and reciever
A remix of Transmit Blocker Baofeng Factory Screws By JULEZ_GERMANY except it allows you to press the black Monitor (MONI) Button because it does not transmit, it just activates the light on press and disables squelch when held down. It…
Mounting Hold for JBtek / SainSmart 8 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM.
Made this for modeling up RC Crawlers, Not sure how accurate the motor mount is I think the motor sits several mm too low, but it all seems close enough to me. Found a better picture for the motor mount, I expect everything is accurate to…
Halterung für Teradek Blot 6 an Blackmagic URSA mini 4.6k Kamera Mounting bracket for Teradek Bolt 6 on Blackmagic URSA Mini 4.6K camera
This is a replacement adjustment bolt for the bowden cable that sets the shift points for the automatic transmission in the mercedes benz 300T/C/D w123 models with the OM617 engine. The slot in the side is so it can be installed without…
Mechanical transmission system. can transform rotation 90 degrees. easy to assemble. 8 part. Note: it might need sandpapering for better fit.
This is a battery extension box for the RadioLink RC8X RC transmitter. This extension allows you to use more widely available rechargeable batteries, like the 2 cell battery packs that use the 18650 cell type batteries. Those battery…
Yet another grippy… but this one's kinda nice. ;) I printed with Siraya Blu on a Sonic Mini 4k printer, using Siraya recommended settings (4.5sec exposure, etc). The holes for standard brass threaded inserts are exact size. Inserts press…
Simple protective cover for the HSE2-868-BS Hörmann hand-held transmitter. In my case, the holder for the lower part broke off. This keeps it in place. The cover also protects against fall damage, as this is how I damaged the lower part.…
Gunsmoke - Deputy Marshal Festus Haggen (Ken Curtis) - 1955-1975 3D printable model.
Hopefully this 3D model of the INJORA LCG Transmission can help in your RC crawler projects! Print it out and test fit in your rig, prior to pulling the plug on the real thing! OR use the STEP file to assist in your CAD designs!
Work-In-Progress: 23.05.17 add dx5e mount file My mini transmitter 162x130x40 mm. on AR Uni board ( https://www.rcgroups.com/forums/showthread.php?2570260-ARUni-AR-Universal-board ) I use frsky XJT transmitter & DX5e DSMX module. For…
1:100 110 kV Double-Circuit Transmission Tower – Highly Detailed 3D Printable Model Bring realism to your railway layouts, dioramas, miniature cities, and engineering projects with this highly detailed 1:100 scale 110 kV Double-Circuit…
I came across Mcchat's manual transmission model , but I couldn't make it work because of too tight tolerances of shift sleeve element. I modified it to print properly on Prusa MK4 using PLA. Additional requirements for assembly: seven…
