Counting matching models…
This is a 60mm Noctua fan mount adapter for the Original Xbox. It was created to replicate the look and feel of the original Xbox fan (there are a few different fan models, but this one is based off of the Nidec fan). Improved airflow was…
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Additional parts needed: Rasberry Pi 4b 40 mm PWM 4V Fan (such as Noctua NF-A4x10 5V PWM) 4x M4 countersunk screw (Normally supplied with the fan) Optional: 4x M3 nut and 4x M3x6 screw (To screw Raspberry pi securely into the case) Print…
This is a remix of the original Case published here: https://docs.pikvm.org/stl/v3.3/ The original case is just fine when placed into one of those dedicated server rooms which tend to be extremely loud with hundreds of fans of all sizes…
Diese Halterung kann einen kleinen Noctua 60mm Lüfter aufrecht stehen lassen ohne dass dieser Gefahr läuft ständig umzukippen, da die Halterung an die Oberfläche geschraubt werden kann. Um den Lüfter zu fixieren kann man m4x40 Schrauben…
Box for Raspbberry Pi 4B. You can use screws M2 8 mm. Fan is Noctua NF-A4x10 5V. Print instructions Material ASA.
A 10mm shortened version from Zocazol. Slightly beveled + reduced hole for better fixing of the side. I did this for my Noctua D15 which fits just right. The lower extension brackets are not needed, stick to the original bracket. If you…
Summary: The original part cooling fan for my Ender 3 broke. I like noctua. I did not want to buy any extra hardware to mount it. It took like 3 months of iteration to land on this design. I've included the .obj, .stl, .3mf, and .gcode…
This is a small case with a window for a Noctua fan controller. There are 2 slots to run wire out of and room in side to bundle up or hide excess wires. The knob is press fits into the fan controller if you want it to be bigger.
I wanted to attach the Noctua NF-F12 fan to the plexiglass of the Original Prusa Enclosure (OPE), but there was a gap between the fan and the plexiglass that allowed heat and odors to leak out of the enclosure. Therefore, I designed this…
When driving on the reace track, gloves get pretty damp and putting them back after a break is always a struggle. The goal of this contraption is to allow to have a good flow of air on your gloves, allowing them to dry before your next…
The better airflow can reduce your CPU temperatures by 10-15°C. Right now it is printed in ASA and CPU reaches 48°C normal browser use. If your case reaches high temps i suggest printing in PETG, ASA or ABS. More details follow after…
A fan shroud that will fit a 50x50x11 (mm) heat sink, like on an Inspur LSI 9300 8i. You'll need a Noctua 40x10 fan, although any other 40x10 might fit, just make sure the cables are on the right side. I've added the source file in…
Custom-engineered for optimal performance-to-noise efficiency in use with the Noctua NF-A12x25 fan. Carefully optimised to ensure smooth pressure gradients as the fan blades pass the radial struts, resulting in higher airflow performance…
Updated: 2024/07/29 Added 180mm version (Silverstone AP181, mounting hole spacing 165mm). Updated: 2024/06/09 Remodeled the outer surface so now it can be scaled to more different sizes without making the shell too thin or too thick. It…
Intended to be used in the Formd T1 case in 3 slot configuration with the air cooling holy trinity: Thermalright AXP-x47 Full Copper Noctua NF-A9x14 Noctua NA-FD1 The pegs are designed to be friction fit and clear the fan retainer clips.…
This model is not mainly intended to be a print model, I still included an STL-file, if you want to do it. Its main purpose is to be used for modeling a support for it or when ever you want to use it. You can also use it as a render model.
Inspired by MajorHardware, i redesigned the whole thing with Airflow in mind, the design works really great, it delivers a lot of air movement with minimal noise. You can mount the fan either by screws or like me just with 4 zipties, the…
Note: For assembly instructions please follow the original post Version I: I initially pritned the Neo Thang cooler for the hot ended of my Ender 3 Max Neo. I however was wondering why both necks were so long. So I shorted both. This…
The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
Case for Noctua 5V 40x10mm 4 pin Fan... Snap together assembly, no screws required. CPU stays very Cool. 36C during stress test (100% Fan) Screwless! Frame4Fan-SimpleNoScrews-Assy Frame with posts, does not require screws for the case and…
This is inspired by Noctua's NV-FS1 desk fan mount with some changes for 3D printing and practicality. Notes: For my desk fan, I decided to use a USB step up converter to power the 12v fan and bought the airflow amplifier. Buying the…
Noctua design high efficiency fan grille for 140mm fans. Update : Modified corner radius to 8mm.
This is a remix (of sorts) of one of my own designs, the Nexus 70mm fan mount for the original Xbox. The Nexus 70mm fan works quite well in the original Xbox, however I've had folks ask me about using the Noctua 60mm fan instead. This is…
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
Noctua design high efficiency fan grille scaled down to 80mm. Added a pocket to compensate for using noctua NA-SAV2 Anti vibration mounts.
Bambu Lab MC Board Fan Noctua Upgrade Designed to improve cooling to the control board heatsink using: Noctua NF-A4x10 5V PWM , NF-A4x20 5V PWM or the original Bambu MC fan. Files Noctua Fan STL Noctua Fan 35x18 Noctua Fan 39x22 Noctua…
Noctua design fan grill sized for 92mm fans like the Noctua NF-A9
The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…
This is a remix of the great Raspberry Pi Case Top of Malolo . We've had a good cooperation over the last few days and have worked on the design and new ideas to make the case even better. So the idea to integrate a fan without the ugly…
These are the parts that are required to mount a Noctua NF-A4x10 5v inside of your Dreamcast. This mod only works in models VA1 and VA2 systems. There are two versions of the latch, the regular one is designed for the original Sega system…
This is a fast and easy to print case for a RPi 4. The cover simply snaps-in making it simple to access the board. It is compatible with all versions of Raspberry Pi 4. If desired, you can add : 4 screws (M2.5 x 5) to secure the board.…
Edit from April 24th 2023 Per request, I've added holes which “ should” work with SCPH-3000x I don't have any other model on hands than my 39000 so do it at your own risk. I'm keeping the old ones working on 39000 for now.…
6025 Fan Holder for Control Board I used Noctua NF-A6x25 5V PWM Bambu > Noctua Dark Gray>Black (GND) Black>Yellow (+5V) Light Gray>Green (RPM/Tach) White>Blue (PWM)
This custom side panel for the Framework Desktop mini-PC can make it run 5-7dB(A) quieter combined with the custom fan duct. See this blog post for further info: https://noctua.at/en/how-to-make-the-framework-desktop-run-even-quieter
Hello! Here is my design of air filter/fume extractor for my enclosed or not printers! I designed it for these HEPA filters: https://fr.aliexpress.com/item/33037955841.html?spm=a2g0s.9042311.0.0.27426c37H91RYB And finally I decided to use…
I adapted the Elegoo Centauri Carbon Printhead Fan cover (credit: magedark) to utilize the High-Efficiency fan grille STL developed by Noctua (credit: Noctua_at). I'm not sure about any actual efficiency gains from this fan, but according…
I have compiled a collection of models that can be used to assemble a 3D printed version of Noctua's NV-AA1-12 Airflow Amplifier so it can be used as a desk fan. You will need the following hardware: 2x M4-12mm screws 2x M4 heat-set…
This fan guard is perfect fit in size for Noctua 40mm fan. Required screws: 3x M3x14 screws 1x M3x25 screw Print settings: Filament: PETG Layer height: 0.2mm Supports: no Perimeters: 2 Be careful not to over-tighten the screws, otherwise…
There is little clearance where the base attaches to the grill piece, so consider using exclusive slicing tolerance or they might require some post-processing.
A re-design of the desk modification for the computer Noctua fan. The fan you need is the 140mm 5v* fan: https://www.amazon.co.uk/dp/B07DXR1Y73 *you can use a 12v fan however you will need to use a controller in that case as seen in the…
Inspired by https://www.thingiverse.com/thing:2843889 I used the one linked above for the Pi3, but needed an upgrade for Pi4 and decided to use a noctua 40x10 fan, as the new raspberry runs a little hotter. This can be mounted on any side…
The first Prusa MK3's were shipped with Noctua fans with hideous colors. Hence I made a cover for the Noctua fan as found here: https://www.thingiverse.com/thing:2730049 When Prusa released the new MK3S parts, some modifications to the…
So, I quite liked Lukaku's original design, but I decided to try to improve on it a bit. Changes remodeled mostly by the original dimensions overall design a bit sleeker (imo) with filleted edges and a more integrated upper part cutout in…
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
This is a mod for my Voron 2.4 Category: 3D Printer Parts
NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9300-8i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9300-8i, but this…
WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…
This is a cover plate for the Noctua NH-D15 cooler, designed to obscure the exposed heat pipes and give a nicer appearance. It has been styled to match the front face of the Fractal North PC case. You will need two of them.
Fan shroud to mount an Noctua NF-A4x10 to an LSI 9400-16i HBA. Design idea copied from @BlackHornet_355398 's fan shroud here: https://www.printables.com/model/377809-lsi-9300-16i-noctua-nf-a9x14-fan-shroud I have a LSI 9400-16i, but this…
Here is a great design for the development of the SKR 1.4 card for the BEAR frame I designed this model for many advantages: Simplify the maintenance of the electrical part with a door on the outside Ventilation of the motor drivers by 2…
This is a Remix from Major Hardware Deskfan, but with Laminar Flow. With this you will get a gentle Airstream, like a Dyson Fan. Happy Printing. Best to print it with 100 infill Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
Update 13/10/2021 Front Plate with / without TEXT available now ! Thanks to all re- designers in the links helps me alot 1st shoot out to MK3 bear Upgrade designer without him this build can not be possible 2nd to SmokiStyle By pear3d.ch…
Scaled up to 200mm and appropriate mounting hole spacing used in 200mm fans (154x154, 110x180, 170x170 mm). also shaped the mounting tabs to match the layout of the NF-A20 instead of being square like a typical fan.
This is a remix of my remix of the "Kobra Go PSU (Chengliang P400W24V) Hex Cover for Noctua 6025" for using it with the stock fan the PSU of the Anycubic Kobra Go/Neo/Kobra2-series comes with ("Cheng Liang CHA6024RL-15B", 400W, 24V) where…
update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…
Made some remix,and modify a 14cm version
I have not printed this model yet, I made it as a refrence model for another prodject. Hope you find a use for it.
This is my version of the desk fan stand Noctua posted on Twitter the other day. Update 27.05.2024: The box for on/off switch and 5.5mm 12V barrel connector is published.…
I was planning to add fan above my aquarium and i needed a fan shroud. Fit perfectly with a cutout in the corner to pass
Brackets for mounting Noctua NF-A12x15 fan above PSU in Fractal Design Terra case. One is mounted on top of the PSU, the other one is mounted on the case from the front panel side. Works with all Terra's inner bracket positions. Must be…
I was asked to add a fan grill to the GMKtec Pro case by @RazziaDK. Because Noctua are so great, I went with their high efficiency grill fan, scaled down to fit 92mm fans.
Stealing Noctua's quiet airflow mod - Shroud for 120mm and 140mm fans When fan blades spin too close to a PC case panel, turbulence builds up—creating unnecessary noise and reducing cooling efficiency. Noctua tackled this challenge…
140mm fan grill remix from Noctua 120mm fan grill
Hello! This is TILTED ADAPTER for Nocuta (or other 40x40x10) fan AND matching Fan Covers! This tilted adapter has 4 benefits: Noctua Fan is REALLY quiet and reliable! You should upgrade! Fan is pumping cooler air (instead of warm from the…
Initially indended to print as a keychain but can also be used as a place holder for a 40mm fan in cad proojects.
An edit of mytro's model. The intake is slightly larger and no longer features the blade guard, as I found that often interfered with the fan hub on some models. The output shroud now features a sweep to more closely resemble the original…
THEY FINALLY DID IT: https://www.printables.com/model/887071-nv-aa1-12-airflow-amplifier Optimized for 0.6mm line width (thinnest wall is 1.2mm). Recommended layer height is 0.2mm but lower is certainly possible if you have the time and…
Attention: This model can be printed support-free on its head (Flat side down, tube up). After the print you just need to remove the one layer inside the tube. This is a fan funnel for a Noctua 80mm fan which I place in my ikea sideboard…
This is a remix of Vince_Print's thing "Raspberry Pi 3B/B+ Case with Noctua Fan". As the title implies, it is a case for the Raspiberry Pi 3B+ intended to house a Noctua NF A4x20 5V Fan. I recently set up OctoPrint on a Raspberry Pi 3B+…
Remixed Noctua High-Efficiency Fan Grill to fit 60mm Fans for Voron Trident and 2.4. I made this so I can have slightly quieter skirt fans.
1x 120mm USB Fan https://amzn.eu/d/0d8K48g2 1x M4x40 1x M4 Nut Then screw a few m3 to connect the fan
This is a mash up remix of StanleyB's and reddaugherty's respective models. I personally need the extra safety precaution that the grill provides.
Version v1.1: changes of the wall thickness Holder would be putted directly on the screws of the Heatsink. fan Noctua A4x20 would fixed with 4 M3x20 screws One Metallholder in the housing have to be bended
Fan Mount Raspberry Pi 4 40mm Noctua with DIN-Rail Mount You need: 6x M2x10 Self Tapping Screws 4x M3x12 Screws 4x M3x4 Threated Inserts Other Mod works with that: https://www.printables.com/de/model/477890-voron-20x10-raspberry-pi-mount…
This is my contribution Remix from Major Hardware Deskfan, but with Laminar Flow. Lets start the Remote Aircooler competition! This is the 120mm Noctua Desk Fan Version This version is calculated to target a 2,5m target. For this the…
New Version When I saw this at Noctua, my first thought was, "This can be 3D printed!" In the latest version V1.0, I made the walls of the funnel thinner and shortened the funnel to save weight and filament. Additionally, I built a stand…
Fan duct to redirect the hot air from inside the case to the outside and prevent a hot pocket between the fans and the top of the case. Based on the FormD T1 1.1 - 120mm Noctua NF-F12 PWM Fan Duct but completly rebuild and adjusted for…
This front fan holder for 80 mm Noctua fans uses their included anti vibration mounts and reuses the old plugs from preexisting Supermicro fans. If you don't have any old fans as a source the part numbers seem to be: Housing: Molex…
I used for some time now the unofficial model of this Noctua shroud that I modified to be mounted on a tripod. They are amazing in creating a gentle airflow to sleep during hot nights and the tripod helps in positioning it the right way.…
I upgraded the fans on my Monoprice select mini from the cheap 30mm units to 40mm Noctua. I found a particularly nice design for a velocity stack for 40mm fans that I was going to print out, but discovered that it had a larger center hub…
A flat fan grill for noctua 40x40
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
Fully printed leaning fan mount + adapter I really liked the Noctua airflow amplifier and wanted to make use of my extra PC fans. Now I just needed a way to stand it up, but also make it adjustable for my needs. So after printing a couple…
A compact desk fan using a Noctua 140 mm PWM fan, with the PWM speed controller integrated directly into the base. The design keeps the fan setup clean and cable clutter to a minimum while allowing convenient speed adjustment directly at…
Direct die cooling is done at your own risk! Noctua cannot be held responsible for any damage that may occur to CPUs or other hardware components when removing the heat spreader and using direct die cooling. Customers can easily 3D-print…
[UPDATE: October 1, 2020]: I uploaded a zip-file, which contains the .f3d and .step files for your convenience. Just delete the stl extension from the filename. This is a remix of the 120mm fan duct from moriaty_ (…
Easy to print shroud for NH-L12s to improve exhausting hot air OUT of the case. Print in ABS/ASA or other heat resistant material. Requires spacer under power supply cable in order to fit, for example THIS (tested). 2025/02/14 - I've…
simple Fan Shroud for the NF-A20 with 170x170mm and 154x154mm hole spacing
This is my best fan design, to date. Recommend 0.15mm layers or smaller, any filament, should print without support but might need a brim. The tail might improve flow ~10%, the intake only about ~2%. Graph shows a rough system curve for…
Model of the Noctua A12x25 Model for folk wanting to enter the Major Hardware Fan Show Down. STL, STEP and F3D files are included.
Before we start: Please make sure your printer is dimensional accurate , see measurements image and verify it's the same with you. So this mod, why? If you are like me and you hate the loud high pitch/whine noise coming from your eSun…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
Remixed the O11 fan duct to fit in the FormD T1 together with my beloved Noctua NF-F12 PWM fans. It's a snug fit so that all of the air pressure is working to get the hot air out of the case instead of just circulating between the case…
I remixed the original version of the Noctua's High Efficiency Fan grill to allow use on 40mm fans. I made this to make 40mm fans slightly quieter. If you're running a 40mm fan upside down, I would highly recommend printing the grill with…
Fan duct to help direct airflow into Noctua NF-A9x14 (92x14mm) fan used in the NH-L9 series coolers. Designed with the Noctua L9i in a small DeskMini PC in mind but should work with similar models. Flaring built into the duct mirrors the…
