944 models
Prusa CORE One+ and CORE One L 2kg Spool Holder This spool holder is a remix of the official Prusa CORE One to CORE One+ upgrade, adapted to support heavier 2kg filament spools. It uses the standard spool holder puck system, ensuring…
Print approx. €2.91–€3.55 excl. taxPreliminary estimate for PETGSource material: PET
Replacement holder if the creality spoolholder needs to be used elsewhere Layer 0.2mm Perimeter 4 Fill 15% Gyroid Supports yes The model is designed in the absence of a digital spool rack…
Print approx. €2.58–€3.15 excl. taxPreliminary estimate for PETGSource material: PET
This is designed to snap-on a 2040 extrutions, like used in the Bear Upgrade for the Prusa Printers
Print approx. €6.03–€7.37 excl. taxPreliminary estimate for one variant
Do you have a filament spool with a beveled or rounded edge that keeps slipping off the spool holder during printing? This compensation middle ring is the simple solution. Creates a flat and consistent surface Easy to install - simply…
Print approx. €0.60–€0.74 excl. taxPreliminary estimate for one variant
This spare part is similar to the original part. Material: PETG Layer height: 0,1 mm - 0,15 mm (recommended). Infill: ≥ 80% Supports: Yes. I hope you find it useful.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
It is a remix of the original spoolholder that uses printed roller arms and springs to press the spool down. To improve the stability of the arm, the profile was divided into two halves, the lower one containing the bushing and separated…
Print approx. €5.32–€6.51 excl. taxPreliminary estimate for PETGSource material: PET
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: ….I used David Glaze 's Silent Auto-Rewinding Gravity Spoolholder (reworked Michal Fanta 's original Gravity…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
Spulenhalter für Prusa-Filamentspulen - es werden zusätzlich 2 Kugellager vom Typ 608ZZ benötigt. Diese gibt es auf Aliexpress günstig. Typ 608ZZ AD22mm, ID 8mm, Höhe 7mm
Print approx. €6.79–€8.30 excl. taxPreliminary estimate for one variant
Inspired by the "Sisyphus Auto-Rewind Spool Holder" made by Vincent Groenhuis I thought it would be much better to replace the original spoolholder with one that works based on gravity as well. The main issue this spool holder solves is…
Print approx. €7.80–€9.53 excl. taxPreliminary estimate for one variant
Wallmount for Spoolholder X2 The wall mount for the filament spool holder X2 can hold filament spools up to 4kg (or generally spools with a diameter of up to 36cm. With the spacers L, M and S, the distances for the different axes of the…
Ich benuze den Adapter um auf der einen Seite ein Standard GARDENA Anschluss zu haben und auf der anderen ein 1,5 Zoll Poolschlauch anzuschließen. Die Version mit den Supportribs kann ohne weitere Supports gedruckt werden. In den Schliz…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Toolholder with a Hook for the Hex-Scraper (https://www.printables.com/de/model/122894-hexscraper-printbed-scraper) and three Holes, especially designed for a Brass-brush, the original Prusa-Pliers and a Knipex SuperKnips.
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
All my designs are going to try to take advantage of and recycle the Prusament filament spool holders. This time it is a dining table centerpiece, with the colors and shapes of Prusa, hexagons and circles. The Center is 4 basic pieces:…
Print approx. €4.83–€5.91 excl. taxPreliminary estimate for PETGSource material: PET
Unlike the original Prusa XL spool holder which is too large for Master Spools, this remix offers a more compact design specifically for them. While maintaining 100% compatibility with the original setup, the redesigned holder has an…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Fits my Tooltray for Lathetop . Pressfit - if loose glue in place. See also additional Hexkeyholder
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
Enjoy!! As you like use it!!
Print approx. €12.39–€15.14 excl. taxPreliminary estimate for one variant
I made this Filamentholder (1Kg) for my Networkrack. It fits exactly for the cage nuts distance. I've used PETG with 25% infill.
spoolholder cap, printed using PLA (glow-in-the-dark green chosen for the pictures) smiley face comes from my stamp model here:
Print approx. €0.39–€0.47 excl. taxPreliminary estimate for one variant
Support me & Join Printables Club This is a spoolholder modification for MMU2S. For auto rewinding filament spools are using gravity. UPDATE: For those who do not have original bases, I added a modified printable base. And source STEP…
You need 2 M4x8.1 Heat inserts and 2 M4x16 socket screws. First mount the base on the printer, after that you can mount the holder to the base. No need to reposition the filament runout sensor.
When you are using the original spoolholder of the BambuLab X1 and you have also the AMS installed, you are still not able to use wider spools. The SpringBuffer is in the way. With this simple 20mm spacer a wider spool is usable. It is…
Ryobi 18v Toolholder with retaining clip. Suitable for most Ryobi 18V handheld tools. Parts can be printed in place if using the same colour. Minimal support needed under the clip and under the housing area where the clip assembles. You…
First mount the base on the printer, after that you can slide the holder to the base. WORK IN PROGRESS, still need to make the testprint but should fit according to the drawings.
I decided to make a toolholder that simply clicks on the frame and rests on the power unit. It holds all the tools that comes with the printer kit! I also added room for a key that I use for nozzle changes. so there's room for 4 alan keys…
A toolholder for Thermomix accessories for the TM 5 but it should also work on the TM 6. Feel free to make a remix. If it does not fit on your printbed then split it into 2 parts with the step file and glue it afterwards together. On the…
A no clunk adaption of the wonderful "Gravity spoolholder for MMU2S" by Michal Fanta. Video: https://youtu.be/Li5INzZ04JA Many of the gravity rewinding spool holder allow the spool to continue spin at the top, by jumping over the gears…
This is a tool holder for Makita 18V tools. I have developed it on a normal holder. My recommendation for the print settings: Material: PETG Layer: 0.2mm Nozzle: 0.4mm Supports: Yes Alignment: Makita Logo upwards Legal information: This…
Description: I designed these leg extensions for the Prusa MINI base to raise it by 30mm or 60mm and a flat spool holder with ball bearings so that the spools run more smoothly. It is also possible to use other spools than Prusament…
A remix of @BenEngelen_1385989's mount that doesn't need screws or inserts. I wanted to minimize the footprint of the printer as much as possible so I also shortened it so it just holds an average 1K spool. Will print without support if…
The tool holder is made for Creality Ender 3 V3 SE 3D printer. Two variations were made, both to be installed on the left and right sides.The support is fitted with pressure, it requires a little force and the fitting measurement of…
Make printer more compact. I tested the model for 2 weeks. 30 hours of printing. There were no problems. Filament PET-G (~140g) Layer - 0.2mm Wall - 2mm Top and bottom - 2mm Infill - 25% Printing with supports The parts in the files are…
This is a remix of Michael Fanta's original Gravity Spoolholder for MMU2S , which rolls the spool up a ramp while filament is being dispensed and takes up the slack when the filament is retracted by letting it roll back down the ramp.…
This is a display for 6 Coaster in a Spoolholder shape. The spool is made of 3 pieces. You can print them flat on the printbed and just slide them together. They fit very well and the friction ist big enough so the parts wont move. Now…
After my first and second toolholder collection, here is the third one. This one contains storage for drills, taps, dies, and countersink bits . All trays have a height of 3 units and are not stackable . (You may put them on top, but not…
UPDATED: Longer versions and right handed thread versions. And for the longer version I also added an end cap to get an cleaner look. Enjoy! Designed and made an spoolholder for the AnkerMake M5 that only requires that you to take off the…
Print with PLA, no support, i printed it with 4 walls. The Gripper is not perfect but holds tight.
Print in PETG and keep the walls plentyfull. Enjoy and happy printing
I changed the hole for the spade. Because at the TM6 it´s a bigger version. And I add a O-Ring 3,5x85mm that it fitts better. I had the problem that the holder has not held well with me at the Thermomix. Now it´s fitts perfect at my TM6.
Description About spoolholders With the introduction of our telescopic injection-moulded spool holders, we also wanted to give you an option that you can print yourself. If you like the telescopic spool holder but don't want to purchase…
This is an o-ring for the spoolholder of the Core One+ It goes on the removeable side of the spoolholder so that the bayonet mechanism stays in place once rotated onto the puck. Get the new spoolholder from the Core One+ uprade parts:…
Es handelt sich hier um ein einfach zu druckendes Modell für einen Werkzeughalter für alle relevanten Werkzeuge für den Prusa XL. Ich habe es aus PETG Prusament Orange gedruckt mit 250°C. Kein Support benötigt. This is an easy-to-print…
This is a combination of the Top spool holder and the Riser for the K1 Max. It is a very basic design that I made in Creality Print itself lol. I reduced the height of the riser made by Fred Boisselier for my K1 Max since I felt it didnt…
It is a adjustable spoolholder. You needed four bearings 608. Print instructions Print the screws with 100% infill.
19.08.2026 UPDATE This set was created alongside the release of the CoreONE+ update. It’s a universal spool‑holder set designed for standard spools and compatible with the Prusa Drybox (except the 2 kg and UNI versions). After purchasing…
Stl - Daten des BOSCH GWS 12V-76 Toolholder aus Thingiverse Link: https://www.thingiverse.com/thing:3971430 Danke an das Original. Ohne Support gedruckt.
This remix of Michal Fanta's excellent gravity spoolholder has a tweaked ramp design which reduces the vertical fall and kachunk noise of the original. Michal's project is of interest to MMU2S owners because it eliminates the need for a…
I like Ikea 365+ box because it's sealed but I also like autorewinders for MMU2, then here is my mashup. Up to 2 spools, max 63mm width, can be used simultaneously and if no springs are used into hub...this can be used as a normal spool…
Introduction: This is a redesign of the spoolholder for the Creality K1C that creality provides. This design innately uses more walls and less infill. This provides better strength and uses the same amount of material as the original one.…
I originally wanted a 2kg spool version of the Spannerhands spool holder. After editing the original stls, I noticed that due to the increased dimensions the print was sagging. Therefore I rebuilt the original design, increasing stiffness…
I made a simple Spoolholder for the Bambulab P1P/X1C. I have not enough space between my Printer and the wall. So i needed a Spoolholder wich doesn't take to much space. I also use the original BambuLab Spoolholder. You need 2x M3x30mm…
>Version for 1 Spool< >Version for 3 Spools< IKEA 365+ 10,6l Drybox Spoolholder for 2 Spool, with space for Silica / Desiccant and a Xiaomi Miija Bluetooth Thermometer. Update 2024-04-01 Added a splitted in 2 parts version for smaller…
An HSW organizer for Creality K1 tools.
Allgemeines Remix des bekannten “Top Mount spoolholder” für den Kingroon KP3s. Meine Version beinhaltet 3 wesentliche Änderungen: der Halter wird fest am Drucker verschraubt (benötigt 2stk M5x20 Innensechskantschrauben) der Haltearm wird…
Large spoolholder for the bambu lab a1 mini. Support for 78mm filament spool.
Update: I added two support arms for better stability. The arms in Version v11 are a little bit shorter. I split the design in two parts and made holes for M4x20 srews. Prints without any supports. Updated version also has some chamfers…
Don't mess around with an external Drybox to print with your moisture sensitve filaments like TPU, PETG and Nylon. Print one yourself, that fits inside the Original Prusa Enclosure! The Drybox is very easy to make, you will reuse your…
Toolholder for Milwaukee M18 machines - Remove the battery and mount the machine The model is mounted with four screws. One model for machines with beltclips and another for macines without From my experience the following settings are…
Here's my Spoolholder for Autorewind (THX for that greate THING ! https://www.thingiverse.com/thing:3252111 ) which fit into IKEA Samla Boxes. To store the Filament in dry and dust save condition. Included: 3-Spool-Version for a…
UPDATES Step file of the assembly has been added 2023-08-05: NOTE , if you use cardboard spools, try and keep the spool off of the very edge of the holder (with the two very thin parts on each key); Cardboard spools tend to be hollow in…
UPDATE 24.11.2023 Thanks to the feedback from “chochi3D” i was able to optimize the overall stability of this spoolholder. The following changes helped improving the stability: using 2 bearings for the one-sided mounting option (can also…
Spoolholder for the Creality K1. It uses the standard given support, moving the spool placement from behind to the side. I used M3 screws for the mounting. I have done two variants, one for just the spool and one whit a support for the…
Hey makers, I still had exactly 5 PC4-M10 PTFE adapters and i wanted a long clip to integrate them into Michal Fanta's wonderful spool holder system. So I built in an M10 thread and minimized the holes from 4 to 3 mm so that the PTFE does…
Modified for allan keys, wrenches and needle for unclogging the nozzle.
Straight dolhouse stair
3DP got tired of adjusting the Prusa Mini's stock spoolholder. And when the big spool didn't fit, he lost his last bit of patience. He decided to create a new one that would fit all spools. He created a new spoolholder that would fit any…
Multi Toolholder for Skadis and HSW (drill/bit/allen) In this download you will find two Versions. One for IKEA Skadis, and one for the HSW Honeycombe This Toolholder will give you 19 slots for Drills (1mm-10mm 0.5 steps) 31 slots for hex…
This design was inspired by some grainy pictures of the Prusa Mini External Beta spool holder posted on twitter, and the desktop spool holder that Atomic Filament sells. The SCAD source code has parameters for things like the "target"…
This a Collection of three Holders ! https://www.printables.com/de/model/500721-original-prusa-enclosure-steelsheetholderdruckplat https://www.printables.com/de/model/504312-original-prusa-enclosure-bottle-and-glueholder-fla
Just 2 versions of clips on which we can screw PC4 (Push to Connect) M6 PTFE fitting. I don't have CAD software to edit STEP files then i updated the original STLs using Blender. The threads were generated with OpenScad before integration…
A simple spoolholder with a hex-pattern. Fits perfect for Prusament spools. Print instructions Best results with 0.15mm but also works with 0.20mm. Print with PLA or PETG Print with support on build-plate only for body 15% infill For a…
Flexible 25x3.5mm O-ring required in the Prusa CORE One to CORE One+ upgrade guide for the upgraded spool holder. It has a 1mm flat bottom for easy printing. For the best flexibility: Use softer (95A will work, but softer is better)…
A simple print to hold all the included tools and accessories
I remixed the tool holder from SixtyFourWarrior to fit my needs. This version is a little bit less wide and in addition I added space for my tweezers and a side cutter. The X-Tool can be hung next to the scraper as well. To be able to…
A fairly simple Toolholder for the standart 3 Tools/Attachments for the KitchenAid stand mixers. even though i tried to design it to be as printable as possible, there are 3 little spots that need a bit of support. other than that it…
I was so satisfied with the first build so i made one more but with a few changes. i think the Spoolholder and filamentfeeder also gonna fit the MK3 BEAR bec it is the MK3s OEM hight of the Z-Axis extrusions. I use 25mm stainless tube and…
This is a remix of another model, but that model did not fit my unit, so i changed the attachment point to fit mine. its a tight fit onto the printer but you should be able to get it on if you set the bottom notch first and then lift the…
Needed a bigger nut to fit spools with bigger holes. (e.g. Sunlu spools). Should fit on spools with a hole with 76mm diameter. Also works with Prusament spools. Print instructions No supports needed. G-Codes for one or two pieses available.
Here is an rail spoolholder for larger rolls! Hier ein angepasster Spulenhalter für größere Rollen! Print instructions 3-4 perimeters + 20% infill for strength.
This model is made to hold every single tool and item you got with the purchase of your ender 3 v3 se, but since most of us also expand our toolkits elsewhere, I wanted to make this toolholder customizable and versatile. There are premade…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 This adapter is usefull if you want to use the Gravity Spoolholder for single filament Prints without the noisy clonk sound 😏 Print instructions…
Original spool holder modelled from scratch. Need more tolerance testing. Can be used as start for modding
Simple open dolhouse stair
Just my version of a simple tool holder, that fits the MK3. It can hold most tools as provided with the Prusa i3 MK3 kit and some more like a spatula and two pliers
A small adapter which enables you to mount the spool holder to the Neptune 4 Max horizontally. 2pcs M3x30mm 2pcs M3 hex nuts 2pcs M3x35mm Be careful, your x-axis will collide with the spool if you use the full printer height!
I designed a tool holder for the Sovol SV06. This mounts on the right side of the printer with the two supports glued to the tool holder. EDIT - 18.12.2022: Smaller supports fit into the holder. EDIT - 15.01.2023: Improved feeds for the…
Thermomix TM6 Holder - Remix - Original Creator: <Click> Cut in 2 Parts and now screwable with 2 M3x20mm Features: -No Supports needed -Stronger than the Original One because right Print Direction -2h Print on a Bambu Lab X1C instead of…
I didn't had enough space to attach the original AnkerMake M5 Spoolholder to my new printer so I made a little stand for it. Print instructions: Just print it with PLA and standard settings. You can slow down the first layer to 50mm/s in…
Base with honeycomb bottom and fixed filament guide for Gravity Spoolholder by Michal Fanta . It has a thread for a PC4-M10 connector. Many thanks for the great design.
UPDATE 06/27/24: I added a new design that does not require bearings and utilizes the center of the spool instead of rolling on the edges. For this version you will need 2 lengths of 4mm OD PTFE tube (you should already have this) to…
Found the original prusa spool holder files on my harddrive after a long time of searching the files on printables… so maybe other users are also looking for it
Filamet spoolholder X2 The filament spool holder X2 for Prusa MK3 can hold any 1kg standard spool (also the 2kg Prusament PLA Recycled) as well as with the 2 different extensions spools up to 4kg or a maximum spool diameter of 350mm. The…
Spool holder for the Creality K1C. Turned out that the holes in the K1C are wider apart than in K1. So extended the arm to fit the K1C. Perfectly complements…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 Hi, i just draw a bigger version of the original Gravity-Spoolholder-Nut so you can use filament spools like Sunlu with bigger holes up to 73mm.…
None of the available versions satisfied me, so I designed my own toolholder. Has space for all the included tools (2 nozzle assemblies, the side cutter, the alan keys, the screwdriver and the nozzle unclogger), a cheap deburring tool…
This spoolholder reduces the footprint of the Ender 3 V3 Plus relocating the spool and the filament runout sensor. It also removes the fault of the bowden tube hitting the top gantry and potentially breaking the filament inside. The…
When managing multiple toolheads, it’s easy to lose track of which spool feeds into which extruder. These caps solve that problem by clearly marking each spool holder with its corresponding toolhead number. Features Perfect Fit: Designed…
Low Profile Spoolholder for sidemounting to the bambulab AMS. With the bowdenconnector it adds just 34mm to the AMS in width. Fits spools from 140 to 200mm diameter. Never unplug the AMS again when printing from an external spool.…
designed for 500g hammer useable deep 28mm distance between hooks 33mm You need to use the mountingplate “4 Hooks.3mf” or “3 Hooks.3mf” from original model
Mini washing machine for doolhouse. Printed in white PLA with 15% fill in with 0.2 mm step. Print on back side that way you won't have overhangs. Printed in white so you can color it after.
![Adjustable Desktop Spoolholder [SCAD]](https://media.printables.com/media/prints/10002/images/81934_39a6b7aa-9e61-4e38-aa3c-5bbe9fca8412/img_0412.jpeg)
