Dragonfly Earrings
Dragonfly Earrings 0.10mm DETAIL Change color to 1.7mm
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
- Downloads
- 1,008
- Likes
- 234
- Rating
- 5
Counting matching models…
Dragonfly Earrings 0.10mm DETAIL Change color to 1.7mm
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
PLA Print instructions PLA 0,2mm
Print approx. €2.05–€2.51 excl. taxPreliminary estimate for one variant
Best at this size, going too small loses detail. Created in ZBrush.
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…
Print approx. €60.44–€73.87 excl. taxPreliminary estimate for one variant
3D Puzzle model of “Dragonfly”. Model is made of 28pieces. Original size has each piece width of 2mm. Printing information: PLA or PETG 15% Infill is enough printing time is ~ 9 hours in case of origin size
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
This STL works better the larger you print it when slicing. After several tests with my .4mm nozzle the details weren't all visible until 180%. I like to keep X & Y at 180% and leave Z lower ~115% to keep them nice and thin (use .gcode or…
Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant
Wife wanted a pill box, designed two. Works for what it was designed for. Designed to print at .2mm layer height, haven't tested it at .3 yet.
Print approx. €3.94–€4.82 excl. taxPreliminary estimate for one variant
Original of this model is made by Dariam and it is decoration which you can put in the flower pot.
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Scootaloo, just walking around. (My Little Pony fanart.) Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645 Print instructions The model comes in two variants: one…
Print approx. €4.73–€5.78 excl. taxPreliminary estimate for one variant
The lost Lament Configuration Dice/Box
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
Hi Fellow Creators, I wanted to upgrade my old Ender 3 Pro with Dragonfly Hotend BMS. There was no appropriate Fan Duct so I create one, and now I'm sharing it with you. Dragonfly Hotend is low, and take a lot of space, so the fan is thin…
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
Good addition to the influence tracker I designed before. Printed on MK3 i3 with Prusa Galaxy Black PLA. 3mf file included: base with rectilinear infill and no top, bottom solid layers.
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
Rotadraw is a retro drawing toy, where the children as young as 4 years old can participate. Attach a disc to a piece of paper using the push pin. Mark the dot on the paper next to the Start sign. Locate the hole on the disk near the…
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for one variant
Dies ist eine runde Dekoration/Geschenkverschönerung für die Konfiramtion mit christlichen Symbolen. Am besten auf 2x drucken, einmal der Ring mit Dekoration und einmal der Fisch. Die beiden Teile passen dann perfekt ineinander, sodass…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
Club Tail Dragonfly
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
The conflict pawn for the game 7 wonders duel. I printed it with a 0.25mm nozzle and with prusament PLA lipstick red, which looks a lot like the original.
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
An extremely light and confortable face shield that can be printed in less than 40 minutes using the provided gcodes on a MK3/S and that is compatible with stacks. Print instructions This face shield has been inspired by the excellent…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
two colours - wallart, coaster, pendant
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Wall art: Dragonfly (three colours)
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for one variant
Stencil: Dragonfly
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Rotary stamp featuring the word "CONFIDENTIAL" repeated across the roller. Perfect for quickly concealing sensitive information on documents, labels, or packages. A practical and efficient way to protect private data. The band con be…
Print approx. €1.93–€2.36 excl. taxPreliminary estimate for one variant
From FreeCAD, simply set the size of your sewing spool holder and the spools you want to use on it, then print it out. It's a first test, and perhaps not everything will be perfect. Feel free to comment on any shortcomings or ideas you…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
This is a transducer holder that lets you put a fish finder on a small boat using only a Scotty mount as the way to secure the transducer to the boat. The print includes the top (scotty adapter) and the bottom (transducer pivot holder).…
Print approx. €6.93–€8.47 excl. taxPreliminary estimate for PETGSource material: PET
Unconfortable Ø18mm buttons.
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
For Joysways Dragonfly /HK Skipper. This is glued into the bottom of the hull with the back aligned with the step. The actual foil can be clipped in and out, and is held in with two 4M dome head cap screws. There is a hole in from the…
Print approx. €2.27–€2.77 excl. taxPreliminary estimate for one variant
First look at 3D pinball I'm making out of old door latch solenoids that have been lying around doing nothing. As a kid I wanted to make a pinball machine. So with just a few solenoids, a 3D printer, and some bits and pieces I'm going to…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Une enceinte de confinement à bas prix, telle a été ma démarche. Démontable et facile à faire évoluer. Pour avoir un endroit sans courant d'air, et à une température “correcte” j'ai conçu cette boite avec quelques coins imprimés et des…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
These holders for 2 or 3 Bonne Maman jam jars are specially designed to prevent the jars from knocking against each other when opening or closing the refrigerator door. To suit all refrigerators, two models are available for two or three…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
This innovative junction box is fully compatible with the WAGO 221 series and supports all connector models, including the 221-412, 221-413, and 221-415. Designed for maximum flexibility, the rail-based approach allows you to mix and…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
**This original config was made by Florian Greco, I just adjusted the config to be more in line for P1P usage** The files in this post are made to be imported to Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as…
The Voronoi patterns flash contest immediately made me think of insect wings, and so this dragonfly was born. This snap-fit model features posable ball-jointed wings and an elegant display stand. Print Settings Print files are divided…
This V2 version includes 6 fully functional configurations that are ready to be imported into Orca without any hassle. These include the printer settings, 4 filament settings and the process settings. I've addressed the issue where some…
This is my Flying Bear Ghost 5 PrusaSlicer Configuration Bundle. Settings are made for a fast print, while keeping good quality. PLA is printed at 200° C with printbed at 60° C and PETG is printed at 220° C with printbed at 60° C. If you…
Start G-Code (Version-Date 29. May 2024): G90 ; absolut coordinates M83 ; extruder relative mode M104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling M140 S[bed_temperature_initial_layer_single] ;…
ATTENTION: as of 1/21/2026, The Phoenix FPV Drone has been "modernized" to compete with my other 5" drone, the Leopard. Though I maintain that the Leopard is slightly tougher, and the Dragonfly is slightly lighter, you need only choose…
My configuration for PrusaSlicer. I will gradually edit the profiles. Printer: Creality Ender-3 V3 KE Print Setting: 0.10mm and 0.2mm | SLOW, NORMAL and SPEED Filament: PLA, PETG, TPU (SPEED has disable auto cooling) 🆕 for all nozzles on…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Print and Play You can Print the included confetti or use other. How to use: Load confetti into container. Retract container compressing the spring. Carefully close gate latch. Wait ….. wait… push the latch forward and BOOM. ITS…
this pack add dragon fly wings on your dummy 13 figurine
This is a dragonfly pendant that I designed. It was done with a Celtic style weave in the wings and tail. I printed with a couple of filament swaps to make the weave detail more prominent, and used silk PLA to catch some extra light. Enjoy.
Do you have some new, fancy dual-color or tri-color filament to play with? Are you wondering which angle to best rotate your model before printing? This Multi-Color Filament Configuration Disk or “MCFCD” will help you determine the angles…
you need select klipper machine and import json files.
OG Lament Configuration for your Hell Priest or Kirsty Cotton cosplay in homage to the classic horror, Hellraiser. An actual, working puzzle box! Do you dare enter "The Labyrinth"? Updated for ease of printing and assembly. It's still a…
I wanted to create a dragonfly model since my daughter and I found a dead dragonfly this summer. The overall proportions are based on the one we found. I tried to create a pattern for the wings which is similar to the real thing but with…
This is a digital 3D printable kit card of Dragonfly! Kit cards are fun, all-inclusive 3D prints that are printed flat and then assembled. This compact, 3D printable design combines the concept of a postcard with the joy of 3D printing.…
deutsch weiter unten english First of all, a little advertising on my own behalf: I recommend you take a look at my latest box with swing stopper (…
I do not use Cura and so I created a PrusaSlicer profile for the Elegoo Neptune 4 Pro (should also work with the non-Pro). This not perfect and there are still some things that need tweaking but it works well for me with the included PETG…
Update 7/9/25- I am uploading a new file for this as the Y coordinates changes when adding the CFS upgrade kit. The new Print Volume is 300x295x300 as per Creality Wiki. I discovered this issue when trying to print my Z offset test and I…
Once you print the sheet you have to break the thin tabs that hold them together and then you can assemble them as a puzzle. If you need a cheat to figure out how to put the pieces together correctly you can watch the assembly animation.…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
Negative-pressure (pulls air) 5015 fan case and shroud for the BentoBox v2.0. The new V2.0 BentoBox design is great, however I do not agree with the original authors fan choice; 4020 axial fans have very low static pressure of around 7 mm…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
Rename all configs from .ini to .cfg ← Configs Rename Robin_nano.ini to Robin_nano.bin ← firmware Check the ReadMe.txt for more info Category: 3D Printers Comes from: https://github.com/nehilo/Klipper_KP3S
This is a remix of ClassyGoat's Dark Souls Bonfire . I also used Dekotale's remix with the separated sword. I edited the bonfire base in Tinkercad to allow for a LED votive candle to be inserted/glued through the bottom. I was going to…
A keychain with your or your family/friends first name, written in individual letter beads. The beads are connected flexibly with rings and move after printing. Its also nice for fidgeting . Note that this model is print-in-place, so no…
As I created the Lucky 13 version I was asked if I could add a version for the Dummy 13 so here it is! No supports required.
A funny desk item that is ideal if you have annoying work colleagues that disagree with you on everything. Printed in PLA with color change enabled in Prusaslicer. Grenade prints in several parts only the top part will need supports.…
This is simple test cube of 20mm dimensions with a 10mm hole. The Fusion 360 file is included as well. I had a lot of trouble getting TPU to print and wanted to share how I did it. For adhesion issues on the MK3s I used blue tape on the…
Designed for injection molding, but you can 3D print it too :) Use 0.15mm or 0.10mm layer height, since the model is 1.5mm tall/thick. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress…
A keychain with your or your family/friends first name, written in individual letter beads. The beads are free to rotate and move after printing, so its also good for fidgeting. Note that this model is print-in-place, so no support…
The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…
Configs with recommended PrusaSlicer configs into Bambu Studio specifically for 3D Lab Print models - does not work for Cura Surface mode models, not available in Bambu Studio. Internal structure correctly prints :)! See json files in…
The bonfire from the Darksouls game series. Print instructions printed at the default size it doesn't really need supports till you get to the hilt, its gets a bit wobbly up that way. I am unsure about support needed at smaller sizes.
This is a spool holder designed to mount inside the Original Prusa Enclosure. It has a spindle that screws to the main bracket, so that an extension piece (or a longer spindle) can be screwed in when you want to use a 2kg spool. To…
Needed to mount my HP Elitedesk 800 G5 Mini under my desk. Quickly sketched up this design with slotted holes for easy installation. Mount the computer upside down, so it can suck cold air from "top cover". Print Settings Printer Brand:…
So here's a config bundle. This bundle includes all the profiles ive made specifically for my stock FLSun V400. It also includes the V400 printer configs as well. The Profiles ive made included some layer heights from 0.1 up to 0.3 layer…
download the K2Plus_orca_config.3mf import to orcaslicer
Bonfire I've made! Enjoy! Take a look at my Tribes or Patreon if you like my stuff! I really appreciate it! Category: Games
A somewhat functional version of the puzzle box from the Hellraiser movie franchise. Turn one of the dials to unlock the box and allow it to be moved to the star configuration. Does not summon Cenobites though. The face designs are based…
This box is intended to be customized, the default configuration probably won't work for very many people. Simple changes like box size can be made with the OpenSCAD customizer but due to limitations in its capabilities most of the really…
This compact gripper has pivoting fingertips that conform to the object being gripped. Unlike parallelogram grippers, this provides a more secure grasp on irregular surfaces. And rather than using fixed pivots, each finger is actually a…
See the following link for video demo. See assembly instructions in photos. Adjust the offset angle between the cams to change the configuration in which the wings flap. Design intended for .4mm nozzle and <.3mm layer height. Use organic…
This is currently an untested print! I am sharing this because this is a start/attempt to generate the labels for this box Print Instructions Print instructions haven't changed compared to the original model Label Recommended profile:…
This multi-jaw vise consists of a base plate and 3 or 4 rack & worm jaw units. Pins in the bottom of each rack slip into keyhole slots in the base for quick reconfiguration. Each jaw slides onto grooves in the rack, trapping a worm/knob…
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
This is a dragonfly I created in Fusion 360 for a decoration on our fence. I am currently printing them out now, 1st one came out great, on to the second. The print time is around 24 hours when increasing the size by 216.5% on a Creality…
OrcaSlicer works very well with KobraMax and massively improves stringing with it's retraction setting "Spiral" Z hop. Only config for 0.8 nozzle is provided, but it is easy to create config for 0.4 nozzle. These settings should be…
A slim wallet for credit cards etc.. Simply configure it the way you like it and that suits your needs. No support needed! ---- Updates 31/7-2022 - New Sideplate: Hexagon with Printebels logo. 9/8-2022 - New Sideplate: Striped. ---- First…
These draw/discard trays keep cards in place. Available in a variety of configurations, such as one, two, three or four bins. (The smoothness of the angles will be largely determined by your layer height resolution.) These were designed…
This is not all of the SEC Teams - as people request the additional teams I will do my best to respond. All gcode files are setup for manual color changes I will fill in the missing teams as they are requested - Enjoy! All gcode files are…
Scale to your liking. Pretty Delicate piece so be careful handling.
Motivation: After having issues with my existing lamp sockets in finding a suitable stand for my Moon Lamp, I decided to create a new adapter. With this adapter, the majority of the socket is concealed within the adapter itself, and…
I wanted to start using Orca for all my slicing needs so i made this Profile for my MPSM. It might not be great but i tested it with a few prints and it worked pretty good. I had no issues. unzip the file and import the config. Includes…
This is a snap-together case for the VisionFive 2 single board computer. I have included both a slotted version (which you'll probably want if you just want to use it as-is) and a solid version (primarily for if you'd like to modify the…
About This is a Raspberry Pi 4B case that has a few configurations for different scenarios. The two parts of the case snap together and can be release by pushing in the front sides and lifting up. This case was designed in OnShape.…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are reconfigurable 22.5 & 45…
Steampunk Dragonfly Figurine
Can I fly with you on your trips outside of the garden??? Made with love, for everyone who would like to feel a bit safer out there. Printed in golden e-Sun PLA on the Anycubic Kobra 2. I advise setting the infill at 70-100% to give it…
As you will know from working with a wood router , there are many calculators and tools to dimension your templates. Still, after calculating you have to build the template yourself. Here's your all-round package: calculation and design…
K1 Max PrusaSlicer Configs for PLA & ASA Includes my base settings for the K1 Max for PrusaSlicer. The printer config itself has GCode for disabling case/side fans for ASA, and enabling them for PLA. These are rough setups which I haven't…
Install Forge-X on your printer and set it up: https://github.com/DrA1ex/ff5m Import the config bundle into Prusa Slicer and add the build plate STL to the printer profile.
Choose your favorite Element and print it out. No, not the Atom itself, but a bohr-model of the atom anyway. Feedback requested! Let me know if you are about to discover some new elements! I gladly extend my script with your new…
I needed a bit more range than some other temperature towers, so I made a configurable Temperature tower based on: https://www.printables.com/model/38895-temp-tower-prusaslicer-02mm-layer-petg https://www.thingiverse.com/thing:2493504…
This is a slicer config file for the Anycubic Slicer (tested on 1.3) that will work on any Kobra 2 model. You may have more configurable options but the main settings in this file will help almost everyone. Added Gcode before and after…
Attached PDF contains documentation on how to wire a Filament Runout Sensor using micro switch and a LED indicator for using with any 3D Printer control board, such as a RAMPS. Documentation contains basic configuration info for use on…
This is not only another simple card box, but it is a fully configurable card box for every card size you need. I decided to build my version, adding some improvements and ensuring anyone can modify the inner size easily. You can find 3…
Bonfire sword from Dark Souls created for my friend for a cosplay event. As existing models were not detailed enough I decided to learn more of the wonderful replicad project and designed this sword. This is not a miniature, the model is…
New design, assemble your cyber dragonfly, and we recommend using color printing! We have separated the wings, so if you have a multi-color 3D printing system, you can try combining the model for printing. We recommend using a body with a…
Dragonfly with 2 versions if you use the g-code please note that it is using a .2 nozzle. In general, this model works better with a .2 nozzle. Please check your slices before printing with a .4 or above.