Counting matching models…
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
A collection of 23 snowflakes with hanging loops for decoration purposes, 7-9 centimeters big. The same snowflakes without hanging loops are here . More big designs ↑ Link: 26 Big Snowflakes collection Smaller, 5 cm, designs ↑ Link: 34…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
Come to the dark side! Minimal Stormtrooper skin for Soozafone's fantastic Lucky 13 armature. Lucky Vader needs his troopers. Get the Vader model here: https://www.printables.com/model/172706-lucky-vader UPDATE: Get C-3PO here:…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A collection of 25 small snowflakes for decoration purposes. A version without hooks is here Mini snowflake collection More smaller designs ↑ Link: 30 Small snowflake collection Slightly bigger, 5 cm, designs ↑ Link: 34 Snowflake…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Poop Emoji
Print approx. €17.83–€21.79 excl. taxPreliminary estimate for one variant
While the lockdown gardening shops were closed, but spring was already in! So had to quickly model and print a pocket shovel so solve some gardening time! Print without support and so far very solid! Print instructions PLA 0.2mm height, 3…
Print approx. €2.59–€3.16 excl. taxPreliminary estimate for one variant
A collection of 34 snowflakes for decoration purposes, a bit thin ones. They are all around 5 cm big. They are also the same snowflakes without hanging loops here . More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
A collection of 34 snowflakes with hanging loops for decoration purposes, with a silhouette design. The same snowflakes without hanging loops are here . More 5 cm designs ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake collection ↑…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Embroidery sock frame is a great tool, but the model needs some tweaks for brother 10cm hoop even after setting the params in OpenSCAD. The most important is that the model needs some room beneath. I made room beneath, strengthened it and…
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant
A collection of 34 snowflakes with hanging loops for decoration purposes, a bit thick ones. They are all around 5 cm big. More 5 cm designs ↑ Link: 34 Snowflake silhouette collection ↑ Link: 34 Snowflake collection ↑ Link: 34 Snowflake…
Print approx. €0.68–€0.84 excl. taxPreliminary estimate for one variant
Betty Boop Black and white Betty Boop cartoon. Single extruder 2 color designs First bottom layer: White Second top layer: Black
Print approx. €1.89–€2.30 excl. taxPreliminary estimate for one variant
Snoopy and Woodstock on their doghouse from Peanuts comic Single extruder 5 color design First bottom layer: White Second layer: Yellow Third layer: Red Fourth layer: Green Fifth top layer: Black
Print approx. €4.33–€5.29 excl. taxPreliminary estimate for one variant
Introducing the "Sewing Tool: Thang and loop pressing bar"! This innovative tool seamlessly combines the precision of the "That Purple Thang" with the functionality of the Loop Pressing Bar . The "That Purple Thang" excels in maneuvering…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Print approx. €20.23–€24.73 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €9.40–€11.49 excl. taxPreliminary estimate for one variant
A collection of 30 small snowflakes for decoration purposes. They are all between 3 and 4.5 cm big. More smaller designs ↑ Link: 25 Mini snowflake collection Slightly bigger, 5 cm, designs ↑ Link: 34 Snowflake silhouette collection ↑…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for PETGSource material: PET
After years of trying to avoid solder fumes I found it time to design and print my own extractor arrangement. Initially the idea was to produce a desktop located unit, but due to space restrictions and consequent positioning issues, I…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant
This design was requested by co-workers of my wife. I had seen some made of wood but haven't seen any for 3d Printing. This is a 2 color design the base is red and the top is white for my design. Any questions? Feel free to message me.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
An extra large Snoopy keychain for all who love Snoopy (10cm), But if you want, you can make it smaller with the attached FreeCAD file. Or directly in the Prusa Slicer. In any case, you still have to set the color change manually.
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
Designed this so my 2-year-old could shoot hoops while in his rear-facing car seat. Mounts through the headrest posts of our 2019 Toyota RAV4. I assume this is likely compatible with other Toyota vehicles, as well as a good deal of other…
Print approx. €3.43–€4.20 excl. taxPreliminary estimate for one variant
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
A Coffee powder portioning scoop in multi color. Print instructions With a layer height of 0.2mm, the color changes occur in layers 11 and 21.
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
We all want to do it! Ball up that piece of paper and take the shot! This is not simply throwing away the trash. No! This is the moment, the game is here, now! You shoot! Buzzer rings! The trash ball sores through the air. Time slows down…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Hello Makers, i saw the video of the game at the beginning on Instagram and was immediately impressed. No further words are needed. Unfortunately I couldn't find a finished model to reprint, so I simply designed it from scratch myself.…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
This set of miniature hoops is designed for dog agility training, specifically for Hoopers and NADAC courses. The models are scaled at 1:40, making them perfect for creating detailed, small-scale training courses. The hoops can be…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix from forkineye for my second entry to the Low Poly contest. It has been reshaped with lower polygons to meet the criteria and resized.
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
I saw this design in Facebook. Someone has made it from wood. Sorry I cannot find the article anymore to give due honour to the one who published it. So I opened quickly Fusion360 and created a model. I know it is not new, there are…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for PETGSource material: PET
GizmoGorilla's design was great, I just needed something a little narrower. Also refined the lead edge to get in the corners better. Printing notes: PETG (black, or anything very dark). .30 mm draft layer (this was only to cut down the…
Print approx. €7.11–€8.69 excl. taxPreliminary estimate for PETGSource material: PET
A box for storing a VIFLY WhoopStore 1s LiPo charger (https://www.viflydrone.com/whoopstor.html) together with a short cable (the included USB-C cable or similar). The lid comes in two versions, with and without text ("VIFLY WhoopStor")…
Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant
I Printed it in PLA for the Smal Scoop support isnt need, And I used Organic Support for the Big Scoop. Layer height: 0.2mm
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Simplified small air sensor holder with one 6.3 and two M4 holes.
Print approx. €0.92–€1.13 excl. taxPreliminary estimate for PETGSource material: PET
If you are an Emoji-fan it should be a must have article for you. Support not necessary. Color change set-up, use g-code or project file as bellow. Happy Halloween, Happy Printing :)
Print approx. €4.88–€5.96 excl. taxPreliminary estimate for PETGSource material: PET
A POD Holder for the Drag X Vaporizer, enjoy it.
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant
The Lamart electric spice or salt grinder is a great helper in the kitchen. I have several and use them daily, but refilling the contents is quite inconvenient. The refill hole is small and it's common to spill more around than I put into…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
ENG below POL Token jako widoczne przypomnienie stanów (modyfikatora -1) do RPG Tajemnice Pętli, może być też używany w każdym innym systemie opartym na YZE. Jak i gdziekolwiek gdzie przyda się wartość -1 ;) ENG Token as a reminder of…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
This is the same model as #2. Lamp mount is angled at 5 degrees down and the inner diameter is 33.5mm to press fit a plastic bulb mount. Securely mount a heat lamp to the inside of your chicken coop or other structure with one simple cut.…
Print approx. €21.29–€26.02 excl. taxPreliminary estimate for PETGSource material: PET
This is the hood with a scoop, allowing extra clearance for additional motor cooling of your winch truck from 3DSets. You should print the hood with extra supports. You can also change the density of a mesh in prusaslicer. Honestly, I am…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
MINI HOOP
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Powerbank case holder belt loop A simple powerbank holder which can attach to a belt for when you need more security than a clip. Great for videographers or hooking electronics up to power for costumes. Holds most 10.000 mAh powerbanks…
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
Hoopers ist eine Hundesportart in der es darum geht, einen Hindernisparcours bestehend aus z.B. sogenannten Hoops, Tunnel, Tonnen und Gates fehlerfrei zu bewältigen. Meine Frau wollte unbedingt für unser Hunde auch so etwas. Also habe ich…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
Update 08/06/22 - Updated logo to match Bambu Lab Logo. Inspired by the Purge bucket by Bifrost I created another version with some modifications to suit my needs: 1 - No supports necessary. The logo is now raised, which removes the need…
This is my remix of the 1.3 version of the popular Poop Bucket from @Mikyleee It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop Scale to ANY SIZE - it prints without supports! Printing on it's face allows for larger sizes & makes the bottom stronger with diagonal layers. The Super Scooper Squared has an…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) Not really suitable to wear on your head, meant to be printed smaller as decoration on e.g. a shelf. - Aren't you a little short for a…
UPDATE 3: I have now added a fourth version as per request by someone in the comments. This fourth version is both shorter and narrower. I have also removed all files and reuploaded with better naming as it was getting confusing: V1.0 is…
This is a full scale printable Stormtrooper Helmet opening sice at the bottom w:228 mm l:224 mm For the glasses i used acrylic glass. I added the form and the addons for mounting to the files. For the Hovi Mic i used this thing. Since…
Update 11 Jul 2023: It has been a year since I designed the PMS (Poop Management System) for Bambu Lab printers. So many things have changed and so much development in the way we approach slicing & printing. I am doing an update and also…
My BambuLab X1CC is in the silent cabinet and I have been thinking for a long time about how I can most comfortably collect the filament poop residues ? I found a beautiful slide (thank you - erickson85!for sharing of your cool model!)…
A few years ago I made this as a rendering for my kitchen backsplash. At some point I thought, why not print it out and put it on a shelf? It's a tribute to the legendary photo from the New York Times "Lunch atop a skyscraper" and of…
An easier to empty poop drawer for the Elegoo Centauri Carbon. Covers the factory poop door, and a nice drawer slides out the side. Mounts with the existing poop chute screws, and one replaced chassis screw. Use an M3x10mm screw on the…
A Basket and Chute to capture filament poop from the Bambu 3D printers. Its fairly narrow and with a removable basket so that the printer can be moved against a wall or other obstruction. *** Magnets go inside the chute on the inside,…
I included the exported files, stl, and printed images. I printed this with 10% infill and 2 walls. .20mm layer height. It uses 380.33 grams of filament with .28mm layer height at 10% infill and takes roughly 8h50mins to print on standard…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:2718242 Edit: Added split versions, use the one-piece model if you…
To redirect the filament waste downwards The waste diverter should be printed from ABS, ASA or HIPS otherwise the hot filament waste can get stuck in the diverter -------------------------------- Der Abfall Umlenker sollte aus ABS, ASA…
A quick remix in tinkercad to add a loop so I can have this on my keys. ive printed in resin and FDM and both came out great. I did make the top infill quite high for strength
A simple and effective poop chute / ramp and bucket solution for the Flashforge AD5X as seen in my review video here: There are two files in this listing - the first is a 3MF configured for the Bambu Lab A1 and if you use the drop down to…
With tree support and 0.2mm layer height: Filament difference: 266.56g vs 294.25g “Model printing time” difference : 4h42m vs 6h17m
No supports needed. Scoop with curve to ensure material does not fall back out when pulling the scoop out. Can be scaled to your liking, standard inner size is 74 x 74 mm. Angled opening part of the scoop should be placed on the printbed…
The sign is mirrored, so the exposed part will be the one laying on the print bed. This ensures better finish of the sign. This whimsical and humorous 2D design features three curious cats 🐈 peeking around the corner, with their head…
My Bambu X1C vibrates quite a lot which means sometimes the bucket is being pushed away. When that happens I find filament everywhere on the table. That's the reason why I made this Remix. If you already printed a bucket without cutouts…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I was making a poop emoji (as one does…) and this happened on the way. There are hollow, solid and separate magnetic versions supporting either 5x2mm or 6x2mm disc magnets. CAD assets are included, in case you need to re-use…
This is a remix of Killonious's model, which I edited to make it wearable and suitable for cosplay use. Original non-wearable version: https://www.thingiverse.com/thing:3486066 Hmu if anyone needs a split version, or if someone splits it…
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Clean up your 3D printer workspace with this handy poop bin designed specifically for the Flashforge AD5X. This simple tray catches filament scraps and purge lines to keep your print area tidy. just print and place it underneath your…
The AD5X Super Duper Pooper Chute collection (see the edit from 12-21 below for additional detail) This poop chute is my homage to the one FlashForge has on their site. It attaches to the pooper using the existing screws. It fits with or…
13.02.2024 - Update: I added another magnet cap file for magnets with 10mm diameter that " Robert Hidasi " created and kindly provided to download. 23.09.2023 - Update: I added the magnet cap file that fireant designed and kindly sent to…
Remixed to fill out the holes for faster printing. The holder is reusing the two existing screws, so no extra hardware is needed! 3MF is for AnycubicSlicerNext, 0,24mm, Tree Support included
Snap in place - Removable poop chute for the Elegoo Centauri Carbon. Poop chute which snaps in place with magnets. The poop chute “floats” and is connected to the printer, which comes in handy with the anti-vibration feet installed. No…
I've been doing a little research on this helmet and have put together my own rendition of this helmet based on the White Amour pictures I've listed here. I recenly made Geoffro's Mk2 helmet from his patreon web site. I'm still very new…
Watch here for more information! It's time for the classic Ace Pilot Snoopy! This is a 3D modeled and 3D printed version of Snoopy's Pilot form with his house. Hope you like it! Let me know what you think. :) Modeling Software: ZBrush…
This is a poop chute for the K2 Plus that I've designed. It attaches with the two screws on either side of the waste chute. There's also an additional retainer bracket that utilizes (2) of the rear panel screws and it supports the end of…
Added a through a hole in his skull so that you can put it on a thread. Also made a flat bottom, and now it prints without supports. Filament - YOUSU Matte Dual Color PLA <3
Come to the slightly smaller dark side! Stormtrooper skin for Soozafone's fantastic Mini 13 armature. Remix of my Lucky 13 version, with additional parts, and detailed legs. The Mini 13 version of is Vader also available. Get it here:…
Print in PLA No supports needed Just glue Face and Tray together Hold at the printer by 10x2 magnets Detect thin walls should be enabled if printed with a linewidth greater than 0.4mm
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
I just received the newest Flashforge AD5X multicolor printer and I needed something to redirect the poop chute since the back of the printer is hardly accessible. I tried to design something that bolt on the frame but it was hard to get…
Modeled from scratch in tinkercad based on measurements taken from Bifrost's purge bucket. Prints fast in vase mode with minimal material usage. Three variations provided. Note that I have not received my X1 yet, so I cannot promise it…
Remix del diseño creado por Kalunho3d que a su vez hizo un remix del diseño de vvk187 Las mejoras que he aportado al diseño son: Diseño del pecho del Stormtrooper para que se pueda imprimir con cambio de color (M600) Las piernas se…
Spring Gun - Shoots fake bullets and poop Single-piece printed spring gun that shoots fake bullets and poop, fast, easy to print and a lot of fun to use. I had to make several attempts to find the right ratio of spring length to spring…
Poop chute for the Centauri Carbon. The model does not require supports when printing. This poop shoot does not need to be screwed into the back of the machine, so can be easily removed to empty out the tray.
Garbage container for bambulab, using 6 neodymium magnets 8x2mm. The magnets must be installed using glue. Installation is made easier with positioning tabs.
Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…
Print your own scale model ARC Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM…
A 1:12 and 1:48 scale Stormtrooper miniature! This miniature is part of a set of 20 available for purchase on my website or on my Patreon until February 2025. The full version includes separated bases, pre-supports for resin printing, and…
This is a lightweight, strong basket that prints in just over 1 hour. The design helps with catching purged material when it drops off the wrong end of the wiper.
Looking for the ultimate conversation starter? Meet the Balloon Dog Poop Sculpture – a cheeky 3D printed parody that mixes pop art with humor. Perfect for desks, shelves, or as a gag gift, this hilarious balloon dog doing his “business”…
Designed for users who want printer waste to drop to the left side of the printer instead of behind it. Installs into the standard mounting using the existing bolts on the rear cover.
Snoopy, from the comic strip Peanuts by Charles Schulz. Snoopy is Charlie Brown's pet beagle. He is is a loyal, innocent, imaginative and good-natured beagle who is prone to imagining fantasy lives, including being an author, a college…
****NEW IMPROVED VERSION 2**** The model V2 no longer needs an elastic band to hold the bag in place over the open end of the scoop, the clips now do this job. As a bonus, supports are not needed when printing this version. Cat litter…
See the update below… This poop chute catches the waste filament as it drops from the Bambu Lab X1 printer. This is a larger sized container than my other design. The poop chute uses a two magnets (0.5 inch diameter, 0.10 thick). The…
snoopy see 3d view here: https://skfb.ly/6v7tp Category: Sculptures
I saw the reference picture on Reddit and decided to remake it. This one is not as pretty as the reference, in my opinion. Be careful with the long rails that fit the pieces together, as it's definitely possible to break them when…
Print your own scale model Clone Trooper! This model comes in 2 pre-exported scales - 1:12 and 1:48 The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!…
This is a remix of the poop bucket from @EnricoPulvirenti I basically added 3 holes to be able to add 3 magnets to avoid the bucket to move behind my printer. The magnets I used are these ones, 5x3mm :…
This model is a simple looping for connecting with Hot Wheels tracks.
